D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators. D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400 Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil. The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol. D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.
SPECIFICATION of ULSD 10 ppm Diesel Fuel (EN590) Density at 15 0C Kg.m3 820-845 Polycyclic aromatic hydrocarbons EN 12916 wt% B Max Flash Point EN 2719 0C >55 Cold Filter Plugging Point CFPP EN 116 0C Winter Grade -15 Max Summer Grade 5 Max Distillation EN ISO 3405 Recovered at 250C Vol% 65 Max Recovered at 350C Vol%95% (Vol/Vol) Recovered at 0C 360 Max 85 Min Sulphur EN ISO 20846 EN ISO 20884 Mg/kg 10 Max Carbon Residue (on 10%residue) EN ISO 10370 wt% 0.30 Max Viscosity at 40C EN ISO 3104 Cst 2.0-4.5 Copper Strip Corrosion (3h a5 50C) EN ISO 2160 Fatty acid methyl ester(FAME) content EN 14078 Vol% 7.0 Max Cetane Number EN ISO 5161 EN 15195 51 Min Cetane Index EN ISO 4264 Calculated 46 Min Water EN ISO 12937 Mg/kg 200 Max Particulate Matter EN 12662 Mg/kg 24 Max Oxidation Stability EN ISO 12205 EN 15751 G/m3 H 25 20 Max Min Lubricity (wsd1,4) at 60C EN ISO 12156/1 Um 450 Max Quantity: Minimum 25.000 MT - Maximum 100.000 MT Origin: Kazakstan Loading Port: Gorgia Batumi Payments (SBLC or BG) via MT-760 unconditional, cashed back from top 25-30 world banks with sellers acceptable verbiage.
Virgin Oil D6, also known as residual fuel oil, is a petroleum product that is obtained from the refining process. It has a high density and a high viscosity, making it a suitable heavy fuel oil used in large marine engines and power plants that require high levels of energy. Virgin Oil D6 is produced from the residue left over after the lighter hydrocarbons, such as gasoline and diesel fuel, are removed from crude oil. It is a heavy, black viscous liquid that is resistant to flow. The product has a high sulfur content, typically between 2.5% and 4%, and a calorific value of approximately 38 MJ/kg.
EN 590 Gas Oil is a 10 ppm (parts per million) sulphur content gas oil. It has a higher cetane number than A2 Class Gas Oil (another 10ppm sulphur content class of red diesel), making it better suited to internal combustion engines in off-road vehicles. Its parameters include density at 15C (typically at this temperature it will have a density of 0.856kg/m3 with a minimum of 0.82kg/m3 required), a typical 0.1% carbon residue value (where the maximum permitted for this grade is 0.3%). The minimum flashpoint (the lowest temperature at which the fuel produces vapour that is an ignitable mixture in air near the surface of the liquid) is 56C.
D2 Diesel Gas Oil is offered by our ends sellers considering needs of diverse industrial sectors. We provide D2 Diesel Gas Oil in different grades. Our D2 Diesel Gas Oil is mainly used to run several industrials as well as commercial automobiles. We take up bulk orders of D2 Diesel Gas Oil and deliver it timely. Our D2 Diesel Gas Oil is available at competitive rates. Minimum ordered quantity of our D2 Diesel Gas Oil should be 50.000MT Grade Available : D2 DIESEL GAS OIL L-0.2-62 GOST 305-82 OFFICIAL GUARANTEED SPECIFICATION FOR RUSSIAN ORIGIN GAS OIL 0,2/62 GOST 305 82 RUSSIAN GAS OIL D2 GOST 305 Â82 COMPONENT INIT MIN MAX Density@ 20 deg C Kg / m3 0.870 Colour 1.0 2.0 Flash point, PMCC Deg C (C) 57 66 Kinematic viscosity @20 deg C C ST 3.0 6.0 Pour point Deg C (C) (*) 10.0 Cloud point Deg C (C) (*) 5.0 Mercaptan Sulphur 0.01 Acidity, mg / 1000 cm3 5 Iodine number g/100g 6 Ash %wt 0.01 Total Sulphur %wt 0.01 0.02 Copper corrosion 3hrs@50 deg C (Typical) 1 A CCR on 10% Residues %wt 0.20 Cetane Index 45 Distillation range: - 50% Recovered Volume deg C (C) 280 - Â90% Recovered Volume deg C (C) 350 - Bacteria MBC Fibre / it 500 - Bacteria CFU Fibre / it 1000 The product is guaranteed by Seller not to contain bacteria and other living organism contamination above normal level (1000 CFU/l).
To serious buyers Available 45,000mt Diesel 5000ppm in hamryia,UAE Price 635 USD /mt Available direct meeting with the seller after verification of buyer documents
Ultra Low Sulphur Diesel Oil -10PPM (EN590) Certificate Of Origin: Azerbaijan First Spot FOB 45,000 MT Monthly Quantity: 300,000 MT Per Week for Yearly Contract ( TO BE SPECIFIED BY BUYER ) Shipping Terms: FOB FUJAIRAH , TANK TO TANK/VESSEL Price: FOR SPOT: 620 USD PER MT GROSS, AND 610 USD PER MT NET. FOR CONTRACT: FIXED PRICE OF $600 GROSS, AND 590 MT PER MT. Inspection: SGS, or equivalent as per Buyerâ??s option. Payment method: By MT103 Swift upon successful SGS. Commission: $10 PER MT, 50% SELLER SIDE CLOSED / 50% BUYER SIDE OPEN. To be paid by the SELLER to all intermediaries under NCNDA&IMFPA that will be Issued by Seller . Payment Guarantee for Yearly Contract By DLC MT6700/SBLC MT760 with the value of monthly quantity valid for the contract period. The DLC/SBLC should be Irr evocable, Transferable, and confirmed issued OR confirmed by top 50 bank. NOTE: 1-Buyer should issue MT199 as proof of fund as per the provided text. 2- Company that will send ICPO must be the same that will issue the MT199, no JVs with exits, or other agreement with End Buyers accepted.
Diesel EN590 10PPM - QATAR ORIGIN - FOB FUJAIRAH Available for serious buyers only The buyer should be in Dubai for the direct meeting with the seller after submitting ICPO & RWA the procedures TANK TO VESSEL / DIP & PAY . 1. Buyer issues official ICPO addressed to the refinery or representative. 2. Seller issues Commercial Invoice (CI), buyer signs and returns the signed invoice to seller. 3. Seller provide buyer with the below listed PPOP. Product Passport (product analysis report) Authorization to verify (ATV) via email or call Statement of Product Availability (Notarized) Commitment and Assurance Letter to supply (Notarized) Authority to sell and collect (ATSC). 4. Buyer extend seller tank and dip test is conducted immediately with buyer team to obtain fresh SGS report. 5. After successful Dip Test in Seller tanks, Buyer takes over seller tank or Seller injects into buyer vessel / Tank and buyer conducts its own DIP TEST Inspection for Q & Q of the Petroleum Products aboard vessel / Tank. 6. Buyer after successful Q &Q Dip test on the product, buyer makes the payment for the total value of product injected into the tanks through the means of MT103 - TT. 8. Upon seller receipt of the payment for the product from the buyer, seller issues to buyer the Title ownership of the product and all exporting document of the Product. 7. Seller pays all intermediaries involved in the transaction.
To serious buyers Available diesel EN590 10PPM in Fujairah port if interested , send ICPO ,company profile , POF to arrange meeting with the end seller face to face for contracting and proceeding the transaction
