Deodorization Tower And Furnace Boiler

What is Blast Furnace Gas Blast furnace gas is a by-product of blast furnaces that is generated when the iron ore is reduced with coke to metallic iron. It has a very low heating value, about 93 BTU/cubic foot, because it consists of about 60 percent nitrogen and 18-20% carbon dioxide, which are not flammable. The rest is mostly carbon monoxide, which has a fairly low heating value already and some (2-4%) hydrogen. It is commonly used as a fuel within the steel works, but it can be used in boilers and power plants equipped to burn it. It may be combined with natural gas or coke oven gas before combustion or a flame support with richer gas or oil is provided to sustain combustion. Particulate matter is removed so that it can be burned more cleanly. Blast furnace gas is generally used to as the raw materials of steam - gas-fired combined cycle power generation. Blast furnace gas fired boiler designed and manufactured in ZG Boiler is suitable for iron, steel, and it is also the best choice of the nation to sustainable development and green economy. Blast Furnace Gas Fired Boiler Structure 1. Using "� " Type Arrangement With whole structure "� " type arrangement, the blast furnace or coke oven gas fired boiler adopts front suspending back supporting, plumbing systems, superheater and other suspended from the roof on the boiler, economizer, air preheater, etc. are arranged at the rear steel shelves, air preheater can be pulled out from the back, which are easy to maintain. 2. Square Chamber Design The furnace is design as square, and the burner is arranged in the corners, using the four corners of the vortex burner ignition, also has a higher temperature of the hot air, combustion gas required to ensure that the temperature field and the aerodynamic conditions not only to ensure adequate fuel gas combustion, but also to prevent the fuel gas and air mixture within the burner. 3. Multiple Security Devices In addition to conventional protection device, the boiler is also equipped with automatic ignition device, flame monitoring device, flame protection device and supply device which automatically cut off the gas when the gas pressure is lower than a certain value and other safety devices

1. High-quality heat source Under common-pressure liquid, the oil transfer heating system can output hot oil of maximum 350 fª for the heat user; Our heat-conducting oil heating systems applied the Fuji temperature control instrument and the intelligent self-tuning temperature control technology. The control precision is about f+ 1 fª and accurately control in the range of the used temperature; the main power for the heating used the solid-state modules non-contact switch circuit in order to adapt to the frequent switching and have no interference to the power supply. Dry combustion can also be avoided. The hot oil cooling system can be designed according to the end userf+s requirement, so that it can satisfy the process requirement of rapid cooling after heating up; 2. To save energy and low operating costs Heat-conducting oil heating system is the liquid phase closed cycle. The temperature difference between the output oil temperature and the return oil temperature is 20-30 fª, that is only to heat a temperature difference of 20-30 fª can the working temperature be reached. Meanwhile, no water treatment equipment is required for this device. No lose of steam runningf= steam reekingf=steam dropping and steam leakage as the steam boiler. The utilization ratio of heat is very high. It can save about 30% energy compared with the steam boiler. 3. Low Equipment Investment Due to the reason that the system of the heat-conducting is simplef=no water treatment equipment and more auxiliary equipmentf=low pressure bore by the boilers etc., the investment for the whole system is comparatively low; 4. Safety Because the system only withstands the pump pressure and there is no explosion risk for the heat conduction oil heating system, it is more secured; 5. Environmental Protection The environmental effect of the organic heat carrier heating system is mainly reflected in the minimal fume emissions, no sewage pollution and no thermal pollution; 6. Widely Application It can be applied in the following areas: by high-temperature shapingf= plate heatingf= rubberf= dryingf= dyeing and printingf= chemical industryf= plywood productionf=rolled water-proof material productionf= asphalt heatingf=non-woven hot-rolled machine, fiber glass press machinef= reaction kettlef= mould f=drying roomf= oven and other heating required industries. In wooden cases

1. High-quality heat source Under common-pressure liquid, the oil transfer heating system can output hot oil of maximum 350 celsius degree for the heat user; our heat-conducting oil heating systems applied the fuji temperature control instrument and the intelligent self-tuning temperature control technology. The control precision is about ía 1 celsius degree and accurately control in the range of the used temperature; the main power for the heating used the solid-state modules non-contact switch circuit in order to adapt to the frequent switching and have no interference to the power supply. Dry combustion can also be avoided. The hot oil cooling system can be designed according to the end user requirement, so that it can satisfy the process requirement of rapid cooling after heating up; 2. To save energy and low operating costs Heat-conducting oil heating system is the liquid phase closed cycle. The temperature difference between the output oil temperature and the return oil temperature is 20-30 celsius degree, that is only to heat a temperature difference of 20-30 celsius degree can the working temperature be reached. Meanwhile, no water treatment equipment is required for this device. No lose of steam running, steam reeking, steam dropping and steam leakage as the steam boiler. The utilization ratio of heat is very high. It can save about 30% energy compared with the steam boiler. 3. Low equipment investment Due to the reason that the system of the heat-conducting is simple, no water treatment equipment and more auxiliary equipment , low pressure bore by the boilers etc., the investment for the whole system is comparatively low; 4. Safety Because the system only withstands the pump pressure and there is no explosion risk for the heat conduction oil heating system, it is more secured; 5. Environmental protection The environmental effect of the organic heat carrier heating system is mainly reflected in the minimal fume emissions, no sewage pollution and no thermal pollution;

1. High-quality heat source Under common-pressure liquid, the oil transfer heating system can output hot oil of maximum 350 celsius degree for the heat user; our heat-conducting oil heating systems applied the fuji temperature control instrument and the intelligent self-tuning temperature control technology. The control precision is about ía 1 celsius degree and accurately control in the range of the used temperature; the main power for the heating used the solid-state modules non-contact switch circuit in order to adapt to the frequent switching and have no interference to the power supply. Dry combustion can also be avoided. The hot oil cooling system can be designed according to the end user requirement, so that it can satisfy the process requirement of rapid cooling after heating up; 2. To save energy and low operating costs Heat-conducting oil heating system is the liquid phase closed cycle. The temperature difference between the output oil temperature and the return oil temperature is 20-30 celsius degree, that is only to heat a temperature difference of 20-30 celsius degree can the working temperature be reached. Meanwhile, no water treatment equipment is required for this device. No lose of steam running, steam reeking, steam dropping and steam leakage as the steam boiler. The utilization ratio of heat is very high. It can save about 30% energy compared with the steam boiler. 3. Low equipment investment Due to the reason that the system of the heat-conducting is simple, no water treatment equipment and more auxiliary equipment , low pressure bore by the boilers etc., the investment for the whole system is comparatively low; 4. Safety Because the system only withstands the pump pressure and there is no explosion risk for the heat conduction oil heating system, it is more secured; 5. Environmental protection The environmental effect of the organic heat carrier heating system is mainly reflected in the minimal fume emissions, no sewage pollution and no thermal pollution;

Vacuum cleaning furnace was used for cleaning the ordinary spinning plates, abnormal shaped spinneret plate, fine denier board, component housing for the terylene, polypropylene fiber, non-woven fabrics etc. Of the chemical fiber cleaning industry. It can also be used for washing the filter elements. It applied the principle that the synthetic polymer decomposed under the condition that isolating from the air in the vacuum state and the high temperature around 500 celsius degree. It owns the advantages of little environmental pollution, perfect cleaning of the spinning board, smoothed nozzle hole, extension the life of the spinneret board as well as shorter working hours, energy saving, easy to operate, good washing effect and high degree of automation etc. It is the updated products for replacing the triethylene glycol cleaning furnace and salt-bath furnace. Vacuum cleaning furnace is also applicable to the cleaning of the die-head and filter elements in the plastic industry.

Ibr – oil / gas industrial steam boilers Ascent offering industrial steam boiler: our range of industrial steam boiler has large furnace volume and free Board area resulting in efficient combustion. These industrial steam boilers are designed for continuous operation for long time without stopping for Maintenance. We understand the needs of our valuable customers, and hence all the products are finished keeping in mind the Requirements and specifications of clients.

We are an eminent name, which is engaged in delivering electric boiler to honorable clients. The offered range of electric boilers is made utilizing high grade raw material and modern machinery in strict compliance with the international quality standards. Moreover, the offered range of electric boilers is suitably checked on different characteristics to ensure that flawless products are delivered at customers' premises. Features: Fully secure safety mechanism Alarm system Durable Specification: Electrical boiler portable Model: esc 4kw Heater capacity: 4kw Water capacity: 5liter Semi automatic steam pressure: 5bar Steam output: 5kg 0r sufficient for one steam iron

With the support of our multi-talented professionals, we have established ourselves as a leading manufacturer, exporter and supplier of quality-assured steam boiler. We manufactured these offered range of products keeping in mind the varied requirements of different industries. In this regard, we use ultra-grade metal and other required raw material. Adding to that, before finally approving these boilers, they are tested according to different quality parameters set by the industry. Feature: Easy maintenance Cost effective Smooth finish High efficiency Convenient outlets Specification: Material used: mild steel, stainless steel Pressure: high pressure Fuel: electricity

With an immense experience and a competent team of professionals, we are able to deliver industrial steam boiler. The offered range of industrial steam boilers is manufactured utilizing high grade raw material, sourced from trustworthy vendors of the market. Our proficient quality personnel ensure to check the entire range of industrial steam boilers possesses large furnace volume as well as free board area. Features: Efficient combustion Longer operation time Less maintenance Superior efficiency Specification: Material used: mild steel, stainless steel Structure: fire tube Style: horizontal Pressure: high pressure Fuel: multi fuel