Sucker rod hook is one of the hosting equipment for sucker rod. It is suitable for all depth and operating conditions complete with single -hand latch construction and safety ring. It is safe and dependably enough. The sucker rod hook is designed and manufacture for API 8A and 8C for drilling and production hoisting equipment.
1: OD: 89mm ( 3 1/2 inch) thread drill pipe 2: Connection:90mm/95mm/105mm 3: Grade: E75/R780/N80 4: Length: 9meters or as your requirement 5: Suitable for water well, geothermal well, gas well 6: Safe drilling depth: Within 800 meters 7: Tool joint:35GrMo/40Cr/4137H
Size 5/8" (16mm), 3/4" (19mm), 7/8" (22mm), 1" (25mm), 1-1/8" (28mm) Length 25', 30' Grade d, kd Materials alloy steel aisi4130, aisi4142 & aisi4720 Standard api 11b.
It is applied to the oil well containing corrosive medium such as salt sulfur, carbon dioxide and bacteria and the wells with fewer sands.Comparing with conventional tubing pump,The API Tubing Pump has better performance in corrosion resistance & antifriction aspects.Plunger of it is nickel plated on alloy base,inside wall of barrel is plated hard cadmium,key parts,such as valve hood,valve ball,are made of materials with excellent mechanical performance and corrosion resistant property.Compared with conventional pump,the series of pump has a longer working life. Subsurface pump Per API Spec.11AX
Description: Sucker rod guide is a downhole tool for preventing eccentric wear of pumping Wells, which is suitable for pumping Wells with eccentric wear, especially for pumping Wells with eccentric wear above the neutral point of sucker rod and directional inclined Wells, and for those with eccentric wear below the neutral point of sucker rod and the nylon centralizer on the sucker rod body for better effect of eccentric wear prevention. Sucker rod centralizer has strong flexibility, it is in contact with the inner wall of the oil pipe, can reduce the friction between the rod and the pipe, enhance the oil extraction life of the pumping unit.
Sucker rod BOP is used to prevent the oil and gas from leaking, and ensure the washing wells and etc, its max working pressure is 1500psi and its used for 1/2to 1-1/8sucker rod. Sucker Rod Bop
Sucker rods are manufactured according to API 11B Specifications. Currently, we market 3 types of API sucker rods Grade D Alloy and Grade D Special which are formulated from different alloysï¼?AISI 4130 (Grade D), AISI 4142 (Grade D) and AISI 4720 (Grade KD). Manufacturing Process: 1. Rod Bar The incoming rod bars are inspected for any damage, fault and discontinuities.Before arranging the rod bars for production process, carry out chemical composition testing, dimensional inspection & surface quality inspection. High quality standard is maintained at various stage inspections. 2.Manufacturing Rod bars are manufactured from hot rolled alloy steel. Rod bars are machine straightened and cold drawn to the required size. The rod bar ends are hot forged according to API designed sizes. The rods are then heat treated over the full length.As per requirement of mechanical properties, the rods are normalized and tempered to the specified level or quenched and tempered to the required hardness and strength. Care is taken to achieve metallographic structure with no residual stresses in the rod.A sample specimen is cut from the heat treated material and is tested for ultimate tensile strength, yield strength and elongation. The rod is then again checked for straightness. The forged ends are properly aligned with its body. Rods are cleaned by shot-blasting to remove any scale and oxidation. The forged ends are machined on C.N.C. Lathe machines as per API dimensions and checked with API approved gauges.
Our tubing anchor anchor the tubing string in a rod pumping well .The tubing anchor effectively reduce rod, tubing, and casing wear. This cuts operating costs. Elimination of breathing and buckling of the tubing string also increases production by lengthening the effective stroke of the pump, which increases volumetric efficiency. Based on proven technology, the Anchor uses hydraulically activated hold-down slips to provide an anchoring point for the tieback or workstring during stimulation operations. These tubing anchors are the most economical and effective insurance you can buy against premature repairs and downtime.
Product Description It is recommended that centralizers be used on the rods for reduction of rod string and oil well tubing wear. The centralizers can be fixed; they can be installed directly on the rod body by pressure die casting method. The rotating centralizers are located between the locks on the rod body and can rotate on the same. Apart from ensuring wear protection, centralizers prevent deposits formation inside oil well tubing and increase the time between well overhauls. 2019 oil well down hole centralizers sucker rod centralizer product show : 2019 oil well down hole centralizers sucker rod centralizer 2019 oil well down hole centralizers sucker rod centralizer Company Information Our Services 1. Are you manufacturer or trader company? We are manufacturer and we could supply more professional technical services and goods. The goods are new or used, if you will make technical drawing and production plans for us? All our goods are new ones, the production schedule will offer to you once getting your purchase order. 2. Do you have related inspection equipments? Yes, our factory is equipment all test equipments, and I could send their pictures and test documents to you. 3. Could you tell me if your price includs the third party inspection charges? No, our price do not include the third party inspection charge, and we will notice on our Quotation. 4. Where did your products sell out? United States, Canada, Mexico, Venezuela, Colubia, and other South American Region Russica, Azerbaijan and Central Asia Countires, UAE, Saudi Arabia and Mddle East Counties. For more information, you can contact me : Looking forward to cooperating with you!
The sucker rod, an essential part in the rod production system, is used to connect the pumping unit on the ground and the oil well pump down in the well.Products comply with Specifications of Sucker Rods (API Spec 11B) and other related standards, and have acquired the authorization to use Official API Monogram.The company produces K, C, D or HL sucker rods with various specifications complying APIâ??s requirements. Technical Performance & Characteristics 1,Advanced online fault detection, hardening, continuous overall tempering and ball blast techniques are incorporated so that mechanical strength and overall performance are enhanced. 2,Threads are processed on special numeral control lathes avoiding any rotation of the rod and then subject to roll forming so as to ensure high precision, reliable performance and extended service life.
