YDS-series products are mainly made up of outer shell, inner vessel, neck tube, multi-layer isolating material and canisters.
1.The outer shell and inner vessel are made of the aluminum alloy plate featuring light weight, high cryogenic strength and corrosion resistance.
2.The neck tube is made of glass-fiber reinforced plastics featuring of high mechanical strength and low heat conductivity.
3.The multi-layer insulation is composed of the reflecting screen of aluminum foils with high reflectivity and insulation material with low heat conductivity and low gas-passing speed to reduce heat radiation.
4.The jacket between the outer shell and inner vessel is of high vacuum to prevent thermal convection. Moreover, an adsorbent with a high adsorbing capacity at the cryogenic temperature is used to ensure the long-term stable and reliable performance of the dewar with more than five-year life service
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Main features of the product: Made of high-strength aluminum alloy. High-vacuum multi-layer insulation design, light weight, small amount of liquid nitrogen static daily steaming loss. Optional lock cover to protect the safety of samples stored in the container. Equipped with a protective cover to prevent the collision of the product during use. Provide vacuum quality assurance of not less than five years. Product introduction: Panshi Liquid Nitrogen Tank is a self-developed product of our company. At present, it has the domestic core patent liquid nitrogen tank production technology. The production quality is strictly implemented in .The products all pass the product quality supervision and inspection. Performance test. This product is commonly used for long-term low-temperature storage and transportation of livestock frozen sperm and vaccines, cells, microorganisms, etc. with liquid nitrogen as refrigerant. It is widely used in animal husbandry bureaus, farms, universities, scientific research institutes, medical, national defense, machinery, electronics, Metallurgy, energy and other industries.
100% NEW HDPE
Features: High strength and high corrosionproof, provides long service life and convenient to fill and clean. It provides wide applicability and can be widely applied for packaging in industries such as chemical engineering, petroleum, medicine and food etc. Seal liquid test:Put the sealed barrel with liquid upside down or tap,the seal is at the lowest position,and no leakage within 24 hours. The standard specifies blow-moulding technology requirements of the barrel, test methods and the rules and symbols, packaging, transporting and storage. This standard applies to polyethylene as the main raw material, barrels production through automatic blow molding machine,and this type of blow molding barrel is mainly used for solids or chemical products. We also can help to change any design as your requirements. such as size,weight,color,capacity ect.
We can supply tanks and vessels required for storage and transportation tanks of various liquids and gases like LPG, PROPANE, PROPYLENE, AMMONIA, LIQUIDCARBONDIOXIDE, CHLORINE , HYDROGEN, NITROGEN, OXYGEN, ARGON, SULPHUR DIOXIDE, BUTADINE, ETHYLENE OXIDE AND OTHER GASES , in a wide range of various capacities for use in domestic, industrial and transportation sectors. The manufacturing of these tanks requires special expertise , technology and strict quality control measures. These tanks are manufactured confirming to various design standards like ASME SECT VIII DIV I & II, AD- MERKBLATTER, PD5500, IS2825 and under the stagewise inspection of various third party inspection agencies like DNV, BVIS, TUV, LLOYDS ,PDIL and others. We also supply a wide range of Process Plant Equipments such as Coded Pressure Vessels, Distillation Columns, Towers, Reactors and Heat Exchangers. Also we undertake turnkey projects to construct Fixed & Floating Roof Tanks, Mounded Storage Tanks and Plant Piping.
35 liters of liquid nitrogen tank 50 caliber Model unit: YDS-35-50 Geometric volume: 35 liters Empty weight: 17 kg Caliber: 50 mm Outer diameter: 446 mm Height: 395 mm Static liquid nitrogen storage period (days): 250 days The common liquid nitrogen tanks we have are 2L, 3L, 6L, 10L,15L, 20L, 30L, 35L, 50L, 60L, 80L, 100L. Otherwise, we also support customized design. Our tanks are widely used in animal husbandry, gas companies, beauty industry , food industry and so on. Welcome to visit our factory.
Capacity 20L Neck diameter 50mm Height 610mm Outer diameter 365mm canisters number 6pcs canister outer diameter 38mm Canister total height 125mm canister height 520mm Empty weight 9.5 kg Lockable lid and protection cover Included. (optional) Static holding time 170-210 days straw capacity / single layer 0.25ml 1190pcs 0.5ml 642pcs straw capacity / double layer 0.25ml 2382pcs 0.5ml 1284pcs ISO/CE Approved Package carton 40*40*69cm gross weight 12kg
Capacity 10L Neck diameter 50mm Height 585mm Outer diameter 305mm canisters number 6pcs canister outer diameter 36mm Canister total height 120mm canister height 470mm Empty weight 6.59kg Lockable lid and protection cover Included. (optional) Static holding time 85-110 days straw capacity / single layer 0.25ml 1190pcs 0.5ml 642pcs straw capacity / double layer 0.25ml 2382pcs 0.5ml 1284pcs ISO/CE Approved Package carton 35*35*60cm gross weight 8kg
Condition: new Capacity: 5~200 m3, 5-200m3 Place of origin: zhejiang, china (mainland) Brand name: cyy energy Model number: cyyst Dimension(l*w*h): customerized Weight: 2-30t Certification: asme/tped/dot/gb Warranty: 5 years After-sales service provided: engineers available to service machinery overseas working pressure: 1~40bar Medium: lox/lin/lar/lng/lpg
