Casing Cup Tester is mainly used for the pressure test on the casing string and blowout preventer stack. All of the oil (gas and water) well has been running in hole with casing and has been installing the mouth of wellhead equipment, to test pressure delamination oneoff for casing and control blowout pressure system, also can be used to test pressure for casing at well site pipe yard. Test pressure very easy, provided the test pressure tool put in the casing.
Description: Casing Cup Tester is mainly used for the pressure test on the casing string and blowout preventer stack. All of the oil (gas and water) well has been running in hole with casing and has been installing the mouth of wellhead equipment, to test pressure delamination oneoff for casing and control blowout pressure system, also can be used to test pressure for casing at well site pipe yard. Test pressure very easy, provided the test pressure tool put in the casing.
Overview In the power system factories and enterprises have a large number of electrical equipment. Most of its internal insulation is oil-filled insulation type. Dielectric strength test of insulating oil is a necessary routine test item. In order to adapt to the rapid development of the power industry our company is the first in China to develop a fully automatic oil dielectric strength test system. This series of products according to the latest national standard GB t507-2002 the power industry standard dl429.9-91 and the latest power industry standard DL t846.7-2004 design and manufacture using microcomputer control mechanical and electrical integration of all automation high test accuracy greatly improve the work efficiency but also greatly reduce the labor intensity of the staff. It is agreed that this series of products is the ideal insulation oil voltage test equipment in China. Specification Technical Parameters Power supply voltage AC 220V22V Power frequency 50Hz 2.5Hz Work rate 200W output voltage 0-80kV Booster capacity 1.5kVA Booster speed 2.0 2.5 3.0 3.5kV s adjustable Total voltage distortion 3 Installation dimensions 470 390 420mm3 Weight 40kg Conditions of Use Environment temperature 40 Relative humidity 80 Capacity of the oil cup 200ml Distance between the electrodes 2.5mm
Supplier: Electrical equipment & supply, measurement & analysis instrument, power supply, power analyzer, safety tester, power supply units
Cup Tester "F" type Cup Tester assemblies are designed to be attached to the drill string and then running into the casing beneath the wellhead to pressure test the blowout preventer stack and the wellhead. When the F type Cup Tester is running into the casing beneath the wellhead, pressure is applied to either a test pump, or by hoisting the "F" type cup after filling the hookup with water. The latter method is fast and accurate. The Cup Tester assemblies are rated to the API standard mill test pressure for casing sizes up to 10,000 psi. Hanlling has the sizes, pressure ratings and connections for every single one of your jobs. Hanlling Cup Tester assemblies come standard with internal flush (IF) connections. Other connections are available at an additional cost. Anytime the "F" type Cup Tester is used; care should be taken to ensure that the drill pipes load capacity is not exceeded. This can be checked by adding the weight of the suspended pipe to the vertical load due to pressure. To find this multiply the cup pressure area (IN.2) by the pressure. The table below shows the total load capacity for each size tester. When ordering please specify: 1. Casing size & weight 2. Part number 3. OD, ID, and drift diameter.
Dielectric strength tester forTransformer Oil BDV Tester Three Cups insulation oil is my company all the scientific and technical personnel according to national standard GB507-86 line and the DL - 474-4-92 the relevant provisions of the DL/T596-1996 play their own advantages after a lot of field test and long-term unremitting efforts carefully research and development of high accuracy fully digital industrial equipment.Dielectric strength tester for insulation oil as a simple modelling is beautiful and easy.Due to the use of automatic digital microcomputer control so high measurement accuracy strong anti-interference ability safe and reliable. Technical parameters Booster capacity 1.5kVA Booster speed 2.0kV /s 2.5kv /s 3.0kV /s 3.5kV /s error: 0.2 kV/s The output voltage 0 80kV (optional) Voltage accuracy (2% reading +2 words) Power distortion rate 1 Electrode gap standard 2.5 mm Number of test 6 times (1-6 times optional) Let stand time 5 min (1-9min optional) Dimensions 670mm 420mm 410mm Weight 38kg
Product Characteristics 1. Dielectric strength tester for insulation oil use large capacity single-chip microcomputer control stable and reliable work 2. Dielectric strength tester for insulation oil there is the function of temperature and humidity in time clock display and is equipped with grounding alarm to remind customers pay attention to safety 3. Dielectric strength tester for insulation oil has a wide range of watchdog circuit to eliminate the phenomenon of crash 4. Multiple operating option Dielectric strength tester for insulation oil program with GB1986 GB2002 two methods of national standard and custom operation able to adapt to a variety of different users choice 5 Dielectric strength tester for insulation oil oil cup is made of a special glass casting forming to eliminate the phenomenon of oil and other interference 6. Dielectric strength tester for insulation oil special high voltage side sampling design for test values directly into the A/D converter to avoid the error caused in the analog circuit makes the measurement more accurate 7. Dielectric strength tester for insulation oil inside has over current over voltage short circuit protection and other functions and with a strong anti-jamming capability good electromagnetic compatibility
Product Introduction In the power system factories and enterprises have a large number of electrical equipment. Most of its internal insulation is oil-filled insulation type. Dielectric strength test of insulating oil is a necessary routine test item. In order to adapt to the rapid development of the power industry our company is the first in China to develop a fully automatic oil dielectric strength test system. This series of products according to the latest national standard GB/ t507-2002 the power industry standard dl429.9-91 and the latest power industry standard DL/ t846.7-2004 design and manufacture using microcomputer control mechanical and electrical integration of all automation high test accuracy greatly improve the work efficiency but also greatly reduce the labor intensity of the staff. It is agreed that this series of products is the ideal insulation oil voltage test equipment in China. Product names insulation oil tester oil pressure tester insulated oil pressure tester oil dielectric strength tester insulation oil dielectric strength tester insulation oil pressure tester automatic insulation oil tester microcomputer automatic insulation oil tester automatic oil tester automatic oil tester portable oil pressure test device electrical strength tester
Automatic Closed Flash Point Tester used to measure the Closed flash point value of petroleum products.Advanced foreign technology is adopted. LCD TET's pure color touch screen displays the man-machine dialogue interface in Chinese. For parameters such as prevalue temperature oil test label atmospheric pressure and test date it has prompt menu prompt input which is convenient and fast.It is an ideal substitute for imported instruments.Widely used in railway aviation electric power petroleum industry and scientific research departments.
Scope Automatic opening flash point tester is based on ASTM D92, GB / T3536 standard "of petroleum products of flash and fire assay (Cleveland open cup method)" provides design and manufacture. Using liquid crystal screen full English human-machine interface, automatic movements, menu-guided input, advanced technology, simple operation, high technology, it is the ideal alternative products imported products. Features 1, large-screen LCD, with full English operating software prompts; 2, with a test date, test time and other parameters are prompted; 3, automatically correct atmospheric pressure and calculate the correction value; 4, innovative introduction of imported XECOM US data processing chip, fast and accurate data processing; 5, automatic heating, automatic sweeping fire, automatic discrimination results automatically print the results; 6, automatically cut off the end of the experiment originated, to protect the safety of the laboratory; 7, circuit safety measures adopted Friend designed to avoid affecting current or voltage changes caused by the instrument; Technical Parameters 1 Power supply: AC 220V ± 10%, 50Hz 2, range: room temperature ~ 400 ?; 3. Repeatability: =4 ? 4, reproducibility: =6 ? 5, the resolution of: 0.1 ? 6, heating rate: in line with standard; 7, Ignition: electronic ignition, gas flame. 8, to adapt to the ambient temperature: 10-40 ? 9, to adapt to the environment humidity:
