Series RCYK-T Armoured Self-Cleaning Permanent Separators | Series Permanent magnetic Separators
Introduction:
Series RCYG auto cleaning super permanent magnetic precise iron remover is a product involving high technology. With a unique mechanical structure, and high-gradient, high-intensity magnetic fields, this product is especially appropriate to remove iron from the materials in industries such as coal, refractories, ceramics, chemicals, cement, building materials, food and so on. It is conducive to the product purification and protection of equipment's normal operation. In particular, it can clear some of the spherical iron, small iron pieces, such as detonators, small nuts, small screws, small balls and so on, which is difficult for the average magnetic iron remover. This product is the best selection in occasions with high requirement of iron remover.
It adds armoured stainless steel on the base of RCYD series to prevent belt damage from the spiculate ferromagnetic materials. It works economically and specially fits to eliminate iron from metallurgy dreg,dreg workshop,foundry workshop and ironworks.
Specifications
1.permanent magnetic iron remover
2.strong magnetic intensity
3.steel armored belt
4.models can be customized
Working principle:
When the materials pass the precise magnetic iron separator through the feeding pipe, the materials will be diverted by the shunt board in front, and then enter the reconstruction area, turning the iron material inside to the direction of the vertical plate, reducing the resistance on the iron from the materials. The materials carry iron to the high-field absorption zone where the iron is adsorbed, and the iron will rotate to the posterior region with the shell, then break away from the strong magnetic field relying on its gravity and centrifugal force.
Features:
1. Super magnetic intensity.
2. Excellent quality and reasonable price.
3. Easy to install and convenient to use.
5. High efficiency and stable performance.
6. High production capacity and a long service time.
7. Low energy consumption.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
Supplier: Distributor of natural homemade soap bars supplier and dealer of aluminum profile, plastic vacuum stands, hotel amenities, cleaning products and bulk order potatos
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Supplier: Pipe bending and cutting machinery, sheet leveler & ctl, roll forming machine, plate rolling machine/ plate bending machine and de coiler ,jewellery making tools, ceramic bowl, jewelry cleaning brushes, kitchen utensils, wooden brush, jewellery casting waxtransformers,distribution and power transformer,varivolt safety transformers diesel generators industrial panels stabilizers energy saver industrial panels
Lead powder and lead concentrate are different forms of lead that serve various industrial purposes. Here's an overview of each: Lead Powder: Form: Lead powder refers to finely ground particles of lead metal, typically in powder or granular form. Uses: Battery Manufacturing: Lead powder is often used in the production of lead-acid batteries. Radiation Shielding: Lead is known for its ability to absorb and shield against radiation, and lead powder can be used in various applications where radiation protection is required. Ammunition: Lead powder is a component in the production of ammunition and bullets. Metal Coatings: It may be used in the manufacturing of certain types of paints and coatings. Lead Concentrate: Form: Lead concentrate is a raw material derived from the mining and processing of lead ores. It is not a pure form of lead but rather a mixture containing lead and other minerals. Composition: Lead concentrate typically contains lead sulfide (galena) as the primary mineral, along with other sulfide minerals. Processing: The lead concentrate is further processed through smelting to extract pure lead metal. Uses: Lead concentrate is a crucial intermediate product in the production of refined lead. It is an essential raw material for lead smelters, where the lead is separated from impurities and processed into the desired forms. Lead concentrate may also contain valuable by-products such as silver and zinc.
SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
RCYD(C) permanent magnetic self-clean iron separator | Series Permanent magnetic Separators Product Description Magnetic Separator for Ore Separation Introduction: Self-discharge permanent-magnet separator series RCYD is energy-economizing type separator equipment using the latest third generation rare-earth permanent-magnet material NdFeB to form magnetic system which produces strong magnet field attraction. This product series links up with transferring equipments to form a complete set to remove the iron magnetic materials under weight of 0.1-25kg mixed among the non-magnetic materials. It can be used for improving the material quality and purification as well as recovering the magnetic materials. Application: It is widely applied for power industry, metallurgical industry,mining industry, paper-making industry, building industry, food industry, cement industry, coal picking-up industry, chemical industry and so on. Features: · High magnetic field intensity, usually used in occasions with plenty of iron. · The wholly sealed structure makes the separator water-proof, dust-proof and corrosion resisting. · Made of rare earth NdFeB · High gauss · Energy saving · Easy to install and convenient to use. · High efficiency and stable performance. · Good operational reliability and flexibility. Application: No need excitation loop and save energy. It is up with permanent magnetic system to keep strong permanent magnetic field.It cast epoxy resin inside and form a whole,it' s used to work in harsh environment for a long period without troubie.The self-cleaning institution is made up with stainless steel scraping board,loop-form adhesive tape,cycloid pin wheel reducer and work frame and etc. It' s used to eliminate the ferromagnetic material weighing from 0. lkg to 35kg.It not only improves the material quality,but also reclaim ferromagnetic material.All of the technical parameters meet the requirement of 1B/T8711-1998 Standard. Appearance size and installation skech map reference P7
Homogeneous iron and steel scrap, magnetically separated. Shredded scrap from lawn mowers, appliances, bikes, etc.
Clean auto cast blocks; free of all steel parts except for camshafts, valves, valve springs, and studs. Free of non-ferrous, and non-metallic parts.
