Prepared Hydraulic Base Aggregate

Supplier: Prepared Hydraulic Base Aggregate

Coarse Aggregates * Coarse Aggregates are the primary building material supply, which includes a core component of constructions and high durability in strength. The Coarse Aggregates are the crushed stones extracted from crushing large rock quarry, boulders, or gravels (larger size). And the majority of the coarse aggregates constitute crushed gravels or stones. * They normally range 40mm, 20mm, 14mm, and 10mm aggregates. While 20mm size aggregates are commonly used, whereas the aggregates greater than 40mm size are used in mass concreting. Aggregates Process * Aggregates are processed to segregated coarse and fine aggregates, properly cleaned, and removed from other materials to give desired strength. Some aggregators are crushed, while some are screened and washed. The proper coarse aggregates processing will furnish cleanliness, sanitation to prevent contamination and maintained to upgrade the quality. Coarse Aggregates Applications * Concrete production is the main use of coarse aggregates. It is available in Stone Chips and Cone Crushed. A mixture of concrete is applied for different civil engineering construction products including: Asphalt Concrete Road Words Portland Cement Concrete Masonry and Paving Blocks Leisure and Sports Facilities Foundations Plaster Mortar, etc. Technical Specifications Name Description Product Name - Coarse Aggregates Type - Aggregates, Crushed Stones, Stone Chips Material - Gabbro , Granite Aggregate Strength - 5.5-7 MPa Applications - Construction, Landscaping, Paving, Foundations, Walkways, Railway Embarkments, Road Metal Packaging Type - Loose Cargo Quality * The quality of coarse aggregate influences the concrete's durability, which is a significant part of the selection process. Particular shape and size influence strength and workability. The coarse aggregates are tested to determine the properties and characteristics which are based on grading, abrasion, and skid resistance test, crushing value, etc. Transportation * Coarse aggregates are transported through in the barges or vessel fleets to different destinations across the globe. The designated fleet conveyor will transport coarse aggregates not less than 10mm, 20mm, 40mm in diameter with a density not less than 2 metric tons. Coarse Aggregates are supplied in loose cargo or jumbo bags. They are also shipped in bulk packs, not less than 1 ton each.

Aggregates : Theis stone is used in ready mix concrete, structural concrete and as fill material in building construction. This product is sized from .05 to two inches in dia. Price of product ( usd price or fob price) : $98.00 -$125 per mt, fob, cif orders over 200,000, mt. Prices negotiable based on total metric tonage. Product origin : columbia, mississippi, usa See attached testing lab. Reports Minimum order size and packgaing details : 50,000 mt fob mississippi or louisiana port of choice. (negotiable)

Construction aggregate, or simply "aggregate", is a broad category of coarse to medium grained particulate material used in construction, including sand, gravel, crushed stone, slag, recycled concrete and geosynthetic aggregates. Aggregates are the most mined materials in the world. Aggregates are a component of composite materials such as concrete and asphalt concrete; the aggregate serves as reinforcement to add strength to the overall composite material. Due to the relatively high hydraulic conductivity value as compared to most soils, aggregates are widely used in drainage applications such as foundation and French drains, septic drain fields, retaining wall drains, and roadside edge drains. Aggregates are also used as base material under foundations, roads, and railroads. In other words, aggregates are used as a stable foundation or road/rail base with predictable, uniform properties (e.g. to help prevent differential settling under the road or building), or as a low-cost extender that binds with more expensive cement or asphalt to form concrete.

A combination of asphalt and stone aggregates in exact proportions used to build pavements.

Aggregates are inert granular ingredients, such as sand, gravel, or crushed stone, which, along with water and Portland cement, are an important component in concrete. Which is classified into two distinct categories, Fine and Coarse. Fine aggregates normally consist of natural sand or crushed stone with most participles passing through a 3/8inch sieve. Coarse aggregates are any particles larger than 0.19 inches but usually range between 3/8 and 1.5 inches in diameter. Aggregates must be pure, hard, and strong particles that are free of absorbed contaminants, clay coatings, and other fine materials that could cause concrete to deteriorate. Laira Group will deliver high-quality aggregate in a range of sizes to our valued clients, based on their needs.

3/4 Stone chips aggregates, often referred to as 3/4-inch aggregates, are a type of construction aggregate characterized by their approximate size of three-fourths of an inch (20 mm aggregates) in diameter. These aggregates are commonly used in construction and various civil engineering applications. Here are some key details about 3/4 Stone chips aggregates: 1. Size: As the name suggests, 3/4 Stone chips aggregates have a particle size of roughly 3/4 of an inch in diameter. They are sometimes also referred to as 20 mm aggregates in metric units. 2. Composition: 3/4 Stone chips aggregates are typically made from crushed stone or naturally occurring stone materials, such as granite, limestone, trap rock, or gravel. The specific type of stone used can vary based on regional availability and project requirements. 3. Uses: These aggregates have a wide range of applications, including: Construction:3/4 Stone chips aggregates aggregates are commonly used as a key component in concrete mixes, asphalt mixes, and road construction. They provide stability and strength to these materials. Drainage: Their size and angular shape make them suitable for use in drainage systems, French drains, and other applications where effective drainage is needed. Landscaping: 3/4 Stone chips aggregates can be used in landscaping projects for pathways, decorative features, and as a base for retaining walls or pavers. Subbase: They are also used as a subbase material for foundations and roads, providing a stable foundation for construction. 4. Durability: 3/4 Stone chips aggregates are known for their durability and ability to withstand heavy loads and wear over time. They contribute to the overall strength and longevity of construction projects. 5. Installation: Proper installation techniques, such as spreading and compacting the aggregates to achieve the desired thickness and density, are essential to ensure their effectiveness in construction and drainage applications. 6. Cost: The cost of 3/4 Stone chips aggregates can vary depending on factors like location, the specific type of stone used, and local market conditions and the availability of aggregates supplier. They are generally cost-effective compared to other construction materials. In summary, 3/4 stone chips aggregates are a versatile and widely used construction material valued for their size consistency, durability, and suitability for various applications, 3/4 stone chips aggregates supplier are playing key factor to boot this business in Bangladesh.

Supplier: Electro motors, hydraulic pumps, bearings, car, hydraulic aggregates, DC motors, cranes
Buyer: Electro motors, hydraulic pumps, bearings, car, hydraulic aggregates, DC motors, cranes

Supplier: Aggregate, crusher products such as aggregate road base, 3/16, 3/8, 3/4, 20/40, (sand 0/3&0/5), single size 2/5
Services: Export and transport