PCD wear parts are used for workpiece support and reference, such as dead centre and centre points, support pads for lathe machines, centring and positioning components, measuring probes and points, master gauges, others PCD wear parts
Details
Polycrystalline diamond is a professionally applied clear diamond thick layer which is extremely hard. Due to extremely low friction and high wear resistant make PCD the ideal material for support and reference parts submitted to wear
Application of PCD wear resistant parts:
PCD bearing, bearing. Such as front plate, pressure rotor, loading shoe, backing plate.
Electronic components. Such as punch tool, rounded shaped die, rectangular shaped die, diamond chip heater, bonding of IC chips.
Machine tools. Such as collet, centerless blade, fixed lathe centres, gauge heads, and support pads for lathes.
Automobile industry (Camshaft, Crankshaft, spray nozzles), measuring fixtures, measuring probes and points, etc.
Advantages of PCD wear resistant parts:
* PCD wear parts improves your precision and makes machining to smaller tolerances possible.
* surface roughness is equivalent to mirror (Ra
PCD Wear Resistant Parts Polycrystalline Diamond is a professionally applied clear diamond thick layer which is extremely hard .Due To Extremely Low Friction And High Wear Resistant Make PCD The Ideal Material For Support And Reference Parts Submitted To Wear. PCD wear parts are used for workpiece support and reference, such as Dead Centre and Centre points, Support pads for lathe machines, Centring and positioning components, Measuring probes and points, Master gauges, others PCD wear parts Application of PCD wear resistant parts PCD Bearing, Bearing. Such As Front PlatePressure RotorLoading ShoeBacking Plate. Electronic Components. Such As Punch ToolRounded Shaped DieRectangular Shaped DieDiamond Chip Heater, Bonding Of IC Chips. Machine Tools. Such as Collet, Centerless Blad, Fixed Lathe Centres, Gauge Heads. and Support pads for lathes. Automible Industry (Camshaft, Crankshaft, spray nozzles), Measuring fixtures, Measuring probes and points, Etc.
Commodity: Synthetic Cryolite Formula: Na3AlF6 M.W.: 209.95 Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively. Specifications: Appearance white powder F 52% min Al 12% min Na 33% max SiO2 0.36% max Fe2O3 0.08% max CaO 0.5% max P2O5 0.03% max SO4 0.6% max H2O 0.4% max Loss on ignition 2 % max Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels. Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
Wollastonite Wollastonite is one of the most versatile minerals. It is a naturally found mineral that is a mixture of calcium, silicon and oxygen. However, it is majorly found in the regions of Rajasthan, Gujarat and some parts of Tamil Nadu in India The physical properties of Wollastonite include an eclectic needle looking structure which is high in brightness and has superior tones of white. It also has low moisture, oil-absorbing and high thermal stability with less solubility in water. It is low in volatility and has a high melting temperature. Wollastonite has medium hardness with rank of 4.5 on Mohâ??s scale. All of these properties make it an excellent and versatile mineral to be used in industries like plastics, paints, ceramics, construction and adhesives to mention a few. We have majorly focused our supply of Wollastonite mineral on its high-end applications in the ceramics, paints and plastics industries. Within the sphere of the plastics industry, it is a brilliant and less-expensive mineral substitute for fiberglass, carbon fiber and synthetic minerals. It is very much popular in automobile industries, as it can enhance the strength, dimensional stability, and influence resistance of car parts, aiding the manufacturers with lighter parts. Wollastonite is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium. It's often used in electronic equipment like connectors and computer housings because of its great insulating and fire-resistant qualities. Wollastonite mineral is customized to meet the needs of our clients' industries. Our wollastonite is anti-corrosion mineral that is ideal for paints and coatings sector. Wollastonite can improve the fire strength of ceramic tiles and sanitary ware, as well as reduce cracking and glazing faults, for ceramic manufacturers. Our Wollastonite is an excellent reinforcing filler for cement boards and fire-insulating boards in the building industry. Aryan Tiles is confident in the quality of its Wollastonite minerals. Wollastonite has proven to be the most adaptable material used in various key sectors, and the market for it is constantly expanding.
Peel-off varnish liquid film protects surfaces from any contamination. Size 5kg 10kg 20kg Peel-off paint "liquid film" protects surfaces from any contamination. The applied paint hardens after application and can be removed by simply peeling it off. For smooth, non-absorbent surfaces. For covering metal parts such as hinges, windows and door handles, machine parts, etc. Peel-off paint is used as temporary corrosion protection or packaging protection for small parts, machines, spray booths, etc. Heat-resistant up to 80 Weight n/a Size 5kg, 10kg, 20kg
Material Rubber Color Black Hardness 90 HRC Thickness Customized
High Quality 99.5% Sulfamic Acid Factory Outlet Chemical Name:Sulfamic Acid CAS #: 5329-14-6 Appearance:White powder Molecular Formula: NH2SO3H Characteristics: White orthorhombic crystal. Nonvolatile, nonhygroscopic, smell-less.High stability at normal temperature and can maintain original quality for 50 years.Freely soluble in water and liquid ammonia, strongly acidic in water solution.Slightly soluble in methanol, insoluble in ethanol and ether.Characteristics of double functional group of amidogen and sulphonic radical, may go on chemical reaction with many matters.Melting point 205�°C. Application: Getting away oxidize surface.Slightly corrosive to metal, metal parts cleaning, used to flush boiler, and sterilize bacterium in water.Raw material for paint, dye stuff and PH test paper. Used as fire resistance of cotton fibre. Used as solidifying agent of resin.Raw material for pesticide intermediate, ramification of sulfamic acid. Herbicide. Ingredient in fire extinguishing media. Pulp and paper industry as a chloride stabilizer. Coagulator for urea-formaldehyde resins. Electroplating.
Specification parameters Test piece 16mm 615mm D Fixture load 25N Weight load 25N 5N Lateral displacement of fixture 42mmroller per revolution Sandcloth 60 Drum diameter 150mm Drum length 460mm Drum speed 40rpm Travel booking 40m20m Wear speed 032ms Inclination angle the angle between the support axis of the 3 specimen and the vertical plane of the drum Volume 70 30 30cm Weight 61kg Power supply 16 AC220V 3A This machine complies with DIN5316 ISODIS4649 GB9867 and is suitable for wear testing of elastic materials rubber tires conveyor belts conveyor belts shoe soles soft synthetic leather leather and other materials It has the characteristics of high efficiency good reproducibility and easy operation Roller diameter 150mm roller length 460mm roller speed 40rpm wear stroke 40mm 20mm wear speed 032 msec inclination angle 3o specimen diameter 16 mm thickness 615 mm test load 5N 1
Fasteners with a tapered shank (self-tapping screws) chipboard screw & particle board screw Similar to a drywall screw except that it has a thinner shank and provides better resistance to pull-out in particle board, while offset against a lower shear strength. The threads on particle board screws are asymmetrical. concrete screw& Tapcons & masonry screw & confast screw & blue screw & self-tapping screw & Titen A stainless or carbon steel screw for fastening wood, metal, or other materials into concrete or masonry. Concrete screws are commonly blue in color, with or without corrosion coating. They may either have a Phillips flat head or a slotted hex washer head. Heads sizes range from 0.1875 to 0.375 in (4.763 to 9.525 mm) and lengths from 1.25 to 5 in (32 to 127 mm). Typically an installer uses a hammer drill to make a pilot hole for each concrete screw. deck screw Similar to drywall screw except that it has improved corrosion resistance and is generally supplied in a larger gauge. Most deck screws have a type-17 (auger type) thread cutting tip for installation into decking materials. They have bugle heads that allows the screw to depress the wood surface without breaking it. double ended screw & dowel screw & hanger bolt Similar to a wood screw but with two pointed ends and no head, used for making hidden joints between two pieces of wood. A hanger bolt has wood screw threads on one end and machine threads on the other. A hanger bolt is used when it is necessary to fasten a metal part to a wood surface. drive screw & hammer drive screw Chiefly used for attaching manufacturers data plates to equipment. Smooth round or mushroom headed with a multi-start thread on the shank, beneath which is reduced diameter shank that acts as a pilot. The screw is fastened by hitting the head with a hammer and is not intended for removal drywall screw Specialized screw with a bugle head that is designed to attach drywall to wood or metal studs, however it is a versatile construction fastener with many uses. The diameter of drywall screw threads is larger than the grip diameter. eye screw & screw eye & vine eye Screw with a looped head. Larger ones are sometimes called lag eye screws. Designed to be used as attachment point, particularly for something that is hung from it. A vine eye (in the UK at least) is similar to a screw eye, except that it has a proportionally longer shank and smaller looped head. As the term suggests vine eyes are often used for attaching wire lines across the surface of buildings so that climbing plants can attach themselves.
Jaw plate is the main wear part of jaw crusher, it has two types: swing and fixed types. Based on different demands, the material can be Mn13, Mn18, Mn13Cr2, Mn18Cr2, etc. In the past 20 years, according to different requirements from users, normal type or special type, the wear parts can be in our standard or customized. To ensure each piece with high wear resistance and longer use life, Denp adopts quality materials and unique heat treatment method. We know how troublesome it is to replace frequently, its' costy and as well a waste of time, so we aim at providing the best quality wear parts to decrease machine downtime, also decreases customers' manufacture cost, improves production efficiency. Jaw crusher, used as the primary crushing step, is widely used in mining, metallurgy, construction meterial, highway, railway, water conservancy and chemical industries for crushing various materials with compression strength less than 350MPa. Jaw Crusher Parameters: Model Feed Opening Size Max Feed Size Capacity Motor Power Adjustment range of discharge opening Eccentric shaft speed Weight (t) (mm) (mm) (m³/h) (kw) (mm) (r/min) PE250 400 250 400 210 3-13 15 20-60 300 2.8 PE400 600 400 600 340 10-34 30 40-100 275 6.5 PE500 750 500 750 425 20-52 55 50-100 275 10.5 PE600 900 600 900 500 30-75 55 65-160 250 15.5 PE750 1060 750 1060 630 72-130 110 80-160 250 28 PE870 1060 870 1060 670 160-210 110 200-260 250 30.5 PE900 1200 900 1200 750 90-190 132-160 95-180 200 50 PE1000 1200 1000 1200 850 197-214 132-160 230-265 200 51 PE1200 1500 1200 1500 950 188-500 160-250 150-350 180 100.9 PE1400 1800 1400 1800 1100 288-480 250-315 500-1100 180 120 PEX250 750 250 750 210 8-22 22 25-60 330 4.9 PEX250 1000 250 1000 210 10-32 30 25-60 330 6.5 PEX250 1200 250 1200 210 13-42 37 25-60 330 7.7 PEX350 700 350 700 300 16-35 30 30-80 300 6.5 PEX300 1300 300 1300 250 15-55 75 30-80 300 11 Jaw Crusher Parameters: Model Feed Opening Size Max Feed Size Capacity Motor Power Adjustment range of discharge opening Eccentric shaft speed Weight (t) (mm) (mm) (m³/h) (kw) (mm) (r/min) PE250 400 250 400 210 3-13 15 20-60 300 2.8 PE400 600 400 600 340 10-34 30 40-100 275 6.5 PE500 750 500 750 425 20-52 55 50-100 275 10.5 PE600 900 600 900 500 30-75 55 65-160 250 15.5 PE750 1060 750 1060 630 72-130 110 80-160 250 28 PE870 1060 870 1060 670 160-210 110 200-260 250 30.5 PE900 1200 900 1200 750 90-190 132-160 95-180 200 50 PE1000 1200 1000 1200 850 197-214 132-160 230-265 200 51 PE1200 1500 1200 1500 950 188-500 160-250 150-350 180 100.9 PE1400 1800 1400 1800 1100 288-480 250-315 500-1100 180 120
