Anticorrosion Tape For Steel Pipeline

Jining XunDa Anticorrosion tape for pipeline 100 Series is polyethylene cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. Usage and Features:1. Widely used on underground and overhead pipelines anticorrosion protection system. 2. Excellent adhesion to pipe and self 3. Resistant to UV 4. Can be applied over a wide temperature range from-30¡ãC to 80¡ãC 5. Good conformability and consistent uniform thickness 6. Cold applied ,and easily applied with no special equipment 7. Compatible with common pipe coatings 8. Excellent resistance to cathodic disbonding 9. Meets ASTM D 1000 Standard 10. Long term corrosion protection and mechanical resistance The tape consists of two layers, adhensive and filmInner layer: butyl rubberOuter layer: polyethyleneThickness: 0.35 - 1.30mmWidth: 50-300mmLength: 30 - 200mTapes specifications: 1) T-150 with 0.51mm / 20mil thickness and 50 - 300mm width2) T-165 with 0.65mm / 25mil thickness and 50 - 300mm width3) T-180 with 0.80mm / 30mil thickness and 50 - 300mm width packing in carton

I description: Polyethylene anticorrosive tape is cold applied tape coating system for corrosion protection of oil, gas, petrochemical, and waste water underground or overhead pipelines. The inner-layer tape shall be applied after the primer and before the outer-layer tape by hand or with a wrapping machine structure The specification of the tape consists of two layers, adhesive layer and film backing Adhesive: butyl rubber Outer layer: special blend of stabilized polyethylene Iii Features Excellent adhesion to pipe and self Resistant to uv Can be applied over a wide temperature range Good conformability and consistent uniform thickness Easily applied with no special equipment Compatible with common pipe coatings Excellent resistance to cathodic disbonding Meets astm d 1000 standard Cold applied Technical datas: Inner wrap tape: xunda-t 100 series TypeT-150T-165T-180 Total thickness0.51 mm0.65 mm0.80 mm Polyethylene film0.31 mm0.34 mm0.39 mm Synthetic adhesive0.20 mm0.31 mm0.41 mm Elongation at break„d 400% Tensile strength60 n/cm61.2 n/cm63 n/cm Yield strength35.5 n/cm42.3 n/cm45.5 n/cm Peel adhesion to primed pipe21.2 n/cm26.5 n/cm33.2 n/cm Dielectric strength35 kv/mm45.8 kv/mm48 kv/mm Cathodic disbandment0.24 in radius 6.4 mm Volume resistivity2.5 x 1012 ohm.M Water vapor transmission rate „t 0.1gm/m2/24h Water absorption rate < 0.06% Recommended application temperature -5 to +600 c Max serve temperature-40 to + 800 c ColorBlack Available roll size (width x length)2" to 9" x 50 to800 feet. Paper cartons packing with waterproof membrane.

Polyethylene anticorrosion tape is cold applied tape coating system for corrosion protection of oil, gas, petrochemical, and waste water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering. The outer-layer tape shall be applied after the inner-layer tape by hand or with a wrapping machine. Ii structure The specification of the tape consists of two layers, adhesive layer and film backing Adhesive: butyl rubber Outer layer: special blend of stabilized polyethylene Iii features: Excellent adhesion to inner-layer tape and self Resistant to UV Can be applied over a wide temperature range Good conformability and consistent uniform thickness Easily applied with no special equipment Compatible with common pipe coatings Excellent resistance to cathodic disbonding Meets astm d 1000 standard Cold applied technical datas: Outer wrap tape: xunda-t200 series TypeT 250T 265T 280 Total thickness0.51 mm0.65 mm0.80 mm Film0.38 mm0.51 mm0.63 mm Adhesive0.13 mm0.14 mm0.17 mm Elongation at break„d 400% Tensile strength45.3 n/cm50.8 n/cm60.1 n/cm Yield strength35.9 n/cm43.4 n/cm45.8 n/cm Dielectric breakdown32.9 kv/mm43.5 kv/mm45.2 kv/mm Cathodic disbandment0.24 in radius 6.4 mm Volume resistivity2.5 x 1012 ohm.M Water vapor transmission rate „t 0.08 gm/m2/24h Water absorption rate < 0.07% Recommended application temperature -50 to +600 c ColorWhite Available roll size (width x length)2" to 9" x 50 to 800 feet. Paper carton packing with waterproof membrane.

Supplier: Stainless steel fasteners ,anchor fasteners, hex bolts, nuts, screws, washers, socket bolts, carriage bolts, high tensile bolts, hot dip galvanized bolts, zinc flake coated bolts, ptfe bolts, hand tools and home hardware fitting, psyllium husk

Supplier: Bearings, fasteners, electrical items, all types of tapes (masking tapes, insulation tapes, Bopp tapes, duct tapes)

Xunda anti corrosive tape for underground pipe wrap tape Xunda tape is mainly engaged in five series of products, which are inner tape, outer tape, joint tape, tape primer, and putty codd categories in nearly 100 specifications. They can be used for the purposes of steel pipe surface corrosion resistance for various pipelines in facility projects of petroleum, petrochemical industry, city gas, oil and gas storage and transportation, power, water supply, metallurgy, civil aviation, etc. 1.1 inner tape: (anticorrosion tape, anti corrosion tape, anticorrosive tape) is for anticorrosion of underground, underwater, & overhead pipelines. 1.2 outer tape: (protection tape, protective tape) is for protection of pipe and the surface of inner tape from damages. 1.3 joint tape: (polyethylene tape, polyethylene tapes, pe tape, rubber tape, butyl tape, butyl rubber tape) is for anticorrosion of field joints, fittings, & specifically piping. Component: backing: polyethylene pe & adhesive: butyl rubber Thickness: 0.38mm to 1.27mm, Width: 50mm to 300mm Length: 30 to 300m 1.4 tape primer: (synthetic primer) complementary product covers of the rusting steel pipe and enable to enhance the adhesive to the pipe since it is working with the adhesive of the polyethylene tape. P19: solid content 19%; P27: solid content 27%.

Pipeline Wrap tape The tape as consists of two parts: 1. Adhesive: Inner layer of Butyl rubber. 2. Backing: Outer layer of Polyethylene(PE) Plastic. Specification of tape: Inner wrap tape: T-140 (0.38mm), T-150 (0.51mm), T-165 (0.64mm), T-180 (0.76mm), T-1100 (1.02mm), T-1130 (1.27mm); Outer wrap tape: T-240 (0.38mm), T-250 (0.51mm), T-265 (0.64mm), T-280 (0.76mm), T-2100 (1.02mm), T-2130 (1.27mm); Joint wrap tape: T-365 (0.64mm), T-380 (0.76mm), T-3100 (1.02mm), T-3130 (1.27mm); Thickness:0.38mm-1.3mm, Width:50mm, 75mm, 100mm, 150mm, 230mm, 300mm Lengh: 30-300m Synthetic Primer: P19: Solid content 19%; P27: Solid content 27%. Mastic filler:: N99: Solid content 99 packing in carton

Place of origin: shandong, china (mainland) brand name: xunda tape model number: t100 Material: polyethylene adhesive: butyl rubber color: black yellow white Design printing:: no printing usage: anti-corrosion for pipe use:: oil water gas pipeline Same band: alta /polyken/ denso adhesive type:: pressure sensitive place of origin:: shandong china (mainland) adhesive side: single sided packaging & delivery Packaging details:320mm*320mm*820mm 1 roll Delivery detail:5 days Item name, inner wrap tape polyethylene tapes, pipe wrap polyethylene tapes, Aluminum tape, polyethylene adhesive tape, butyl rubber adhesive tape Size of products, 1roll/set , 200ft*150mm, 100ft*100mm Material, butyl rubber bituminous compound and adhesion promoting resins Structure, 2 layers without primer, pe + adhesive Product color, white, black, yellow, grey Packing, shrink wrap+2pcs color labels(color labels can print customer logo) Package, 4, 6, 12, 24 sets/ carton Moq, 500 roll Samples lead time, within 7 days Payment term, 30% deposit, the balance against copy of shipping documents Trading term, fobguangzhou/fobshenzhen/fobshanghai/cit Delivery date, within 10days after confirm your po. Usage:, it can be use on gas , oil, water pipeline polyethylene, underground overhead Excellent adhesion to inner-layer tape and self resistant to uv Provides long-term corrosion protection to steel pipelines. Repair of damaged factory applied corrosion protection. Outlining weld beads and cut backs prior to wrapping bare-welded joints. Outlining seams on spiral and seam welded pipe. 320mm*320mm*820mm 1 roll