Polyaluminium Chloride

Product name: Polyaluminium chloride (PAC) CAS:1327-41-9 Appearance: yellow powder Usage: water treatment,Flocculant PAC( Polyaluminium Chloride) is high-efficient, cheap and nontoxic inorganic high molecular compound. The solid is yellow powder. It is easily soluble in water. In the hydrolytic process, it is accompanied with the chemical processes such as electrochemisty, coagulation, absorption and precipitation. The product has the features including wide applicable range of pH value, large granule and quick speed in sedimentation. It is widely applied for treating the drinking water, industrial water and daily sewage etc. PAC As professional polyaluminum chloride PAC manufacturer, we will promise you the best quality and most satisfying service. Packaging & Shipping Package:Woven bag inner-lined with PE bag, 25 kgs net weight/bag, or on customer's request. Dear customers: We will arrange produce and shippment immediately when you place the order.

1.Light yellow granule/powder 2.Solid content30% 3.25kg/bag 25kg/bag

PAC-I(POLY ALUMINIUM CHLORIDE, For industrical water treatment) PRODUCT APPEARANCE APPEARANCE: The solid product is produced by the spray drying technology and the obtained product is dark yellow, Corresponding liquid products is dark yellow. RAW MATERIALS: Hydrochloric acid or aluminum-containing hydrochloric acid, calcium aluminate powder. USAGE: A variety of industrical wastewater treatment( paper, printing and dyeing, leather,ceramics, metallurgy,mining, oil, fluoride, coal washing, food and other industrical water) Industrical water treatment Water reuse treatment. Cooling water treatment Municipal wastewater treatment SPECIFICATION Product name PAC-I Quality Standard£¬GB/T22627-2008 Solid Appearance Dark yellow powder Aluminium oxide/% 29MIN Basicity % 40.0-----90.0 PH Value£¨1 Water insoluble quality score £© 3.5-5.0 Water insoluble quality score /% 0.6MAX PACKAGE Solid PAC package, outside bag is the woven bagwhichismade from polypropulene and the inner bag is thin film bag which is made from polyethylene, 25Kg per bag. The liquid product is usually transported by tank cars, also can be loaded in barrels pending on the requirements of the customer. Plastic woven bag,n.w.25kg

Product introduction 1.Become flocculant in high speed , big block ,high activity and rapid sedimentation analysis. 2.It doesn't need other accessory ingredients and use less dosage than other unorganic coagulating agents and has lower cost for treatment water. 3.It has wide range PH value and strong adaptability and good effect for high turbid and high temperature organic contaminated water and lowly turbid low--temperature or ganic continue-aminated water. Product Details: AL2O3 content/% : 30 Basicity% : 40-90 Density(20¡ãC)/(g/cm3) : 1.12 Water insoluble content /% : 1.0 PH(1% aqueous solution) : 3.5-5.0 arsenic(As) content% : 0.0002 Ammoniacal nitrogen(N)content % : 0.01 lead(Pb)content% : 0.001 cadmium(Cd)content% : 0.0002 mercury(Hg)content % : 0.00001 hexavalent chrome(Cr6+)% : 0.0005 Application 1.Tap water,life sewage 2.Various industrial waste water. 3.Tannage and cloth cockling-prevent 4.Cement Solidifying, and moulding 5.Refining of pharmaceuticals, glycerine and sugar 6. Catalyzer carrier 7. Paper-making glue. Packaging and storage : 1, Lined with plastic bags, with outer surface of plastic film woven bag, each bag weighs about 25kg. 2, Stored in a cool and dry place to prevent the sun and rain. Cautions: 1.This product mustn't be stored together with other chemical reagents. 2.Solid products should be stored in a ventiated and dry place with the storage period of two years,and the availability won't be changed after the product is affected by damp. 25kg/bag.

Item Standard AL2O3 (m/m):% 28-30 27~29 Water- insoluble(m/m):% 1.0 1.5 Ammonium Nitrogen:% 0.09 0.15 Density(20oC)/(g/cm3) 1.12 1.12 Ph Value(1% aqueous solution) 3.5~5.0 3.5~5.0 Basicity % 40~90 40~90 As(m/m):% 0.005 0.005 Pb(m/m):% 0.001 0.003 Cd(m/m):% 0.002 0.002 Hg(m/m):% 0.00001 0.0001 Cr6+ (m/m):% 0.0015 0.005. In two-layer bag with the interior in plastic and the exterior in woven. The weight of each bag is 25kg.

English name: polyaluminium chloride(poly aluminium chloride), short for pac Flocculant /coagulant synonyms: pac; aluminum chlorohydrate; aluminum chlorhydroxide; aluminum chloride, basic; aluminum hydroxychloride; poly aluminum chloride; polyaluminum chloride Cas no.: 1327-41-9 Molecular formula: [al2(oh)ncl6-n]m Technical standard: gb15892-2003 Pac-01(white powder, spary drier type): for drinking water, paper-making, medicament, cosmetics auxiliaries, etc.Specifications: al2o3, %, 29-30; bacisity, 40-60; water insoluble, less than 0.3%: Pac-02(light yellow powder, spary drier type): for drinking water treatment or wastewater treatment.Specifications: al2o3, %, 29-32; bacisity, 70-85; water insoluble, less than 0.5%: Pac-03(yellow powder, drum drier type): for drinking water treatment or industrial wastewater and municipal wastewater treatment.Specifications: al2o3, %, 29-30; bacisity, 80-95; water insoluble, less than 1.5%. (new product)pac-s(yellowish powder, spary drier type): for drinking water, paper-making, medicament, cosmetics auxiliaries, etc.Specifications: al2o3, %, 30; bacisity, 60-80; water insoluble, less than 0.2%:(water solution: totally transparent) Pac-04(yellow brown powder, drum drier type): for industrial wastewater and municipal wastewater treatment.Specifications: al2o3, %, 25-28; bacisity, 85-110; water insoluble, less than 1.5%: 25kg/bag 1*20gp=20mt without pallet

Index name First grade product Liquid Solid Relative density(200C)í¦ 1.18-1.21 Al2O3% í¦ 10.0 29.0 Alkalinity% 60-85 60-85 Water-insoluble% í_ .0.2 0.6 pH(1% aqueous solution) í_ 3.5-5.0 3.5-5.0 Sulfate radical(SO42-)% í_ 3.5 9.8. 5 kg / pack.

Polyaluminium chloride 1. Its dosage lower than aluminum sulfate (based on Al2O3) and water treatment cost is lower than other inorganic flocculants. 2. The product can cause quick formation of flocs, big flocs formation and rapid precipitation. Its treatment capacity is 1.3-3.0 times of other inorganic flocculants. 3. It enjoys wide-range adaptability for different-temperature source water and a good solubility. 4. It is slightly corrosive and easy for operation. 5. The liquid product is suitable for automatic dosing. Furthermore, it will not block pipes over long-time usage. GRADES PAC-01,White powder, spray dryer type, for drinking water treatment or paper production. PAC-02,Yellow powder, spray dryer type, for drinking water treatment or wastewater treatment. PAC-03, Yellow powder, drum dryer type, for drinking water treatment or waster water treatment. APPLICATION METHODS 1. The liquid product can be dosed directly or dosed after dilution. As for the solid product, dilution is necessary before being dosed. Water amount for dilution shall be determined based on the amount of the chemical to be dosed and the quality of water to be treated. Dilution proportion for solid product is 2%-20%, and for liquid product, 5%-50%(based on weight percentage). 2. The dosage of the liquid product is 3-40g/MT and the dosage of the solid product is 1-15g/MT. The specific dosage is based on the flocculation test and on the trial. 3. Its acidity is lower than other inorganic coagulants. PACKAGE AND STORAGE 1. The solid product is packaged in 25kg polypropylene woven bagswith inner plastics bags. 2. The liquid product can be stored for one year without losing its effect, while the solid product, for two years. The product should be stored in a dry and ventilative room, but the effect will not be affected even if it gets wet. Pack in 25kg PP woven bags with inner plastic bags