Carbon Chain Distribution by GLC (%)
C14
C16
C18
C20
C22
0.5 max.
5.0 max.
95.0 min.
2.0 max.
0.2 max.
Appearance Flakes / Fused
Hydrocarbons (% by wt) 0.5 max.
Moisture (% by wt) 0.1 max. (Fused)
0.3 max. (Flakes/Pastilles)
Acid Value 0.1 max.
Saponification Value 0.3 max.
Iodine Value 0.3 max.
Avg. Molecular Weight 267 - 280
Hydroxyl Value 200 - 210
Solidification Range (C) 55 - 58
Flash Point (C) Ca 195
Density (gms/cc) @ 60C 0.805 - 0.815
Colour (apha) 10 max.
Boiling Range (C) 330 - 360
Carbon Chain Distribution by GLC (%) C16 C18 C20 1.0 max. 99.0 min. 1.0 max. Appearance Flakes / Fused Hydrocarbons (% by wt) 0.3 max. Moisture (% by wt) 0.1 max. (Fused) 0.3 max. (Flakes/Pastilles) Acid Value 0.1 max. Saponification Value 0.2 max. Iodine Value 0.2 max. Avg. Molecular Weight 267 - 274 Hydroxyl Value 205 - 210 Solidification Range (C) 56-59 Flash Point (�°C) Ca 195 Density (gms/cc) @ 60C 0.805- 0.815 Colour (apha) 10 max. Boiling Range (C) 330 -355 Carbonyl Value (as ppm CO) 50
Carbon Chain Distribution by GLC (%) C14 C16 C18 C20 C22 0.2 max. 2.0 max. 98.0 min. 1.0 max. 0.1 max. Appearance Flakes / Fused Hydrocarbons (% by wt) 0.5 max. Moisture (% by wt) 0.1 max. (Fused) 0.3 max. (Flakes/Pastilles) Acid Value 0.1 max. Saponification Value 0.3 max. Iodine Value 0.3 max. Avg. Molecular Weight 267 - 275 Hydroxyl Value 204 - 210 Solidification Range (C) 55 - 58 Flash Point (C) Ca 195 Density (gms/cc) @ 60C 0.805 - 0.815 Colour (apha) 10 max. Boiling Range (C) 330 - 355
Carbon Chain Distribution by GLC (%) C12 C14 C16 C18 0.2 max. 2.0 max. 95.0 min. Appearance Fused / Flakes Hydrocarbons (% by wt) 0.7 max. Moisture (% by wt) 0.10 max. (Fused) 0.15 max. (Flakes) Acid Value 0.10 max. Saponification Value 0.20 max. Iodine Value 0.20 max. Avg. Molecular Weight 238 - 249 Hydroxyl Value 225 - 235 Solidification Range (C) 46 - 49 Flash Point (C) Ca 180 Density (gms/cc) @ 60C 0.805 - 0.815 Colour (apha) 10 max. Boiling Range (C) 305 - 330
[Technical Indicators] 1. Industrial grade Indicator Name/Indicator Value Powdered Products (F) Needle Products (Z) Level 92 Level 93 Level 95 Level 92 Level 95 Appearance White or light yellow powder, without caking White or yellowish needle-like, without lumps Active matter,% 92.0 93.0 95.0 92.0 95.0 Free oil,% 1.2 1.2 1.2 2.0 1.5 Inorganic salt,% Sodium sulfate 5.8 4.8 2.5 4.8 2.5 Sodium chloride 0.15 0.15 0.15 0.15 0.15 Moisture,% 2.0 2.0 2.0 4.0 3.0 PH value (1% aqueous solution) 7.5-9.5 7.5-10 Whiteness (WB), 90 2. Toothpaste grade Indicator Name/Indicator Value Toothpaste Grade (Y) (I) Level (II) Level (III) Level Appearance White or yellowish powdery or needle-like, without caking Active matter,% 95.0 93.0 93.0 Free oil,% 1.2 1.2 1.2 Inorganic salt,% Sodium sulfate 2.5 3.2 4.0 Sodium chloride 0.15 0.15 0.15 Moisture,% 2.0 2.0 3.0 PH value (1% aqueous solution) 8-9.3 8-9.3 8-10 Whiteness (WB), 90 Foaming capacity/mm 180 Heavy metal (as Pb)/ (mg/Kg), 15 Arsenic content (as As)/ (mg/Kg), 3 Total bacterial count/ (CFU/G), 100 Total number of molds and yeasts/ (CFU/G), 100 Fecal coliforms/G Not to be detected Pseudomonas aeruginosa/G Not to be detected Staphylococcus aureus/G Not to be detected  3. Latex grade Indicator Name/Indicator Value Latex grade (powder, needle, liquid) Aggregate grade Seed level Liquid K12 Appearance White or yellowish powdery or needle-like, without caking Light yellow transparent liquid Active matter,% 94.0 92 28.5-30.5 Free oil,% 0.8-1.0 1.5-2.0 1.5 Inorganic salt,% Sodium sulfate 3.0 3.0 1.5 Sodium chloride 0.15 0.15 0.05 Moisture,% 3.5 3.5 - PH value (1% aqueous solution) 8-10 7.5-9.5 Whiteness (WB), 90 - Color Klett (30% active), - 60 4. Reagent grade Indicator Name/Indicator Value Reagent grade Level 99% Level 97% Appearance White flaky crystals White powder Solubility (1%, alcohol) Completely dissolved Solubility (10%, aqueous solution) Completely dissolved Chroma APHA (20%, deionized water), 15  - Active matter (%), â?¥ 99 (on dry basis) 97 Petroleum ether soluble matter (%), 0.2 1.0 Sodium sulfate (%), 0.5 1.5 Sodium chloride (%), Moisture (%), 1.0 2.0 PH value (1% aqueous solution) 6.0-8.0 6.0-11 Phosphate, 1ppm - Lead (Pb), 2ppm Iron (Fe), 1ppm Nitrogen, 5ppm - Arsenic (As), 0.1ppm Fraction content (%), 99.0 Absorbance (3%, deionized water) 230nm 0.4 260nm 0.1 280nm 0.1 - 410nm 0.01
Supplier: Di ethylene glycol, mono ethylene glycol, poly ethylene glycol, tri ethylene glycol, butyl di glycol
butyl glycol, ether glycol, butyl di glycol ether
ethyl acetate, butyl acetate, propylene glycol, butyl acrylate monomer
styrene monomer
vinly acetate monomer
methyl methacrylate
toluene
mix xylene
cyclohexaanone
methyl isobutyl ketone (mibk)
benzophenone
n butanol
n propanol
iso propyl alcohol
octanol
iso butanol
iso propenol
glycerine
nonyl phenol
phenol 95 %
phenol 99 %
sulphuric acid
whitening agent
bleaching powder
soda ash
stearic acid
hydrochloric acid
zinc dust
tetra hydro furan (thf)
acrylonitrile (acn)
acrylic acid (aa)
c 9
c 10
methylene dichloride (mdc)
edc
dimethylformamide (dmf)
hexane
2 methlypentane
3 methlypentane
2, 3 dimethlyebutane
2,2 dimethlybutane
pigments red | green | blue
hpam (hydrolyzed form of polyacrylamide)
Services: Import | export | custom clearence
Buyer: Soda ash light, soda ash dense, caustic soda falkes
glycol, monomer, hydrocarbons, ketones, alcohols, other chemicals, intermediates, chlorides, coating raw materials, coating solvent/ isohexane, pigments
hpam, cementitious materials, construction & building material
micro nutrients, feed additives & fertilizer ingredients
industrial chemicals & related products, minerals, ores and metal concentrates, salt & allied products
indian food grains, legumes, indian fruits, indian spices, indian herbs
Appearance: White solid or Pastilles, no odour. Application: - Used directly as foam stabilisers, detergency-boosting and lubricant additives. - Major application is in the manufacture of chemical Intermediates and Surfactants. - This product is of 100% vegetable origin. Product's Specification will be provided upon inquiries request.
Diethylene glycol (DEG) is an organic compound with the formula (HOCH2CH2)2O. It is a colorless, practically odorless, and hygroscopic liquid with a sweetish taste. It is a four carbon dimer of ethylene glycol. It is miscible in water, alcohol, ether, acetone, and ethylene glycol. DEG is a widely used solvent. It can be a contaminant in consumer products; this has resulted in numerous epidemics of poisoning since the early 20th century.
Monoethylene glycol (MEG) in its pure form, it is an odorless, colorless, syrupy liquid with a sweet taste. It can be used for applications that require chemical intermediates for resins, solvent couplers, freezing point depression, solvents, humectants and chemical intermediates. These applications are vital to the manufacture of a wide range of products, including resins; deicing fluids; heat transfer fluids; automotive antifreeze and coolants; water-based adhesives, latex paints and asphalt emulsions; electrolytic capacitors; textile fibers; paper and leather
Polyethylene glycol (PEG) is a polyether compound derived from petroleum with many applications, from industrial manufacturing to medicine. PEG is also known as polyethylene oxide (PEO) or polyoxyethylene (POE), depending on its molecular weight. The structure of PEG is commonly expressed as H (OCH2 CH2) OH.