We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
MATCOAT range is transparent or colored film forming coating polymers based on methacrylic acid co-polymers type A, B & C confirms to USP/NF & EP specifications. The range of Metcoat is useful for film coating, enteric coating, moisture barrier coating, sustained release, taste masking of bitter drugs, binder for powders, transdermal therapeutic system etc. GRADES: Metcoat L30D, Metcoat L100D, Metcoat L100, Metcoat S100 PACKING Liquid form - 60kg plastic drum. Powder form - 5kg and 20kg net in corrugated with polyethylene liner.
Properties: T-225 is copolymer of polyacrylic acid and hydroxypropyl acrylate, it has good scale inhibition and dispersion properties to calcium phosphate and calcium carbonate, it has good dispersion properties to ferric oxide sludge, clay and grease. T-225can be used under high pH situation and has good compatibility with other organophosphines and BTA, T-225 can effectively withhold sediments of zinc salt and calcium phosphate, it has good scale inhibition and dispersion properties under high temperature and alkaline situations. Specification: items index Neutro Acid Appearance Colorless to light yellow viscous liquid Solid content % 30.0 min 30.0 min Free monomer (as AA )% 0.5 max 0.5 max pH(1% solution) 7.5f+1.0 2.5f+0.5 Limiting viscosity number (30f¦) dl/g 0.060~0.095 Density (20f¦)g/cm3 1.10 min 40%, 50% PAA are also supplied. Usage: T-225 can be used in circulating cool water system in situation of alkaline and excess of phosphate. It can be used as scale inhibitor and dispersant for heater, none-column evaporator boiler, circulating cool water and oilfield dirty refilling water with high calcium content. The dosage of 10~30mg/L is preferred. It can be built with organophosphines to form full organic alkaline formula. Normally In 200kg net Plastic Drum, IBC drum can also be used as required
CAS 26677-99-6 Properties: MA/AA(Copolymer of Maleic and Acrylic Acid) is a low molecular weight polyelectrolyte, a copolymer of maleic anhydride and acrylic acid. It has good dispersant performance against carbonate and scale inhibition for phosphate. it has good thermal stability, can be used under high temperature (300 centigrade). MA/AA(Copolymer of Maleic and Acrylic Acid) has good compatibility when used together with other agents. MA/AA(Copolymer of Maleic and Acrylic Acid) is widely used in low-pressure boiler, centralized heating, centralized air-conditioner and circulating cool system. It can also be used as chelating dispersants in woven and dyeing fields. Specification: Appearance Clear brown liquid amber transparent liquid Solid content % 48 min 50 min Free monomer (MA) % 9.0 max 5.0 max Density (20 centigrade)g/cm3 1.18 min 1.18min pH(1% solution) 2.0~3.0 2.0¿¬+1.0 Usage: MA/AA(Copolymer of Maleic and Acrylic Acid) is used in circulating cool water system, medium or lower pressure boiler and distillation system in which high temperature is usually encountered. MA/AA(Copolymer of Maleic and Acrylic Acid) can be used alone or together with other organic phosphates. When used together, the dosage of 2-10mg/L is preferred. The dosage for use as woven & dyeing and accessory detergent should be determined by experiments. Package and Storage: Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for one year in room shady and dry place. Safety Protection: Acidity, Avoid contact with eye and skin, once contacted, flush with water.
Properties of MA/AA: MA/AA is a low molecular weight polyelectrolyte, a copolymer of maleic anhydride and acrylic acid. It has good dispersant performance against carbonate and scale inhibition for phosphate. it has good thermal stability, can be used under high temperature (300C). MA/AA has good compatibility when used together with other agents. MA/AA is widely used in low-pressure boiler, centralized heating, centralized air-conditioner and circulating cool system. It can also be used as chelating dispersants in woven and dyeing fields. Specification of MA/AA: Appearance Clear brown liquid Amber transparent liquid Solid content % 48 min 50 min Free monomer (MA) % 9.0 max 5.0 max Density (20C)g/cm3 1.18 min 1.18min pH(1% solution) 2.0~3.0 2.0+/-1.0 Usage of MA/AA: MA/AA is used in circulating cool water system, medium or lower pressure boiler and distillation system in which high temperature is usually encountered. MA/AA can be used alone or together with other organic phosphates. When used together, the dosage of 2-10mg/L is preferred. The dosage for use as woven & dyeing and accessory detergent should be determined by experiments. Package and Storage of MA/AA: Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for one year in room shady and dry place. Safety Protection of MA/AA: Acidity, Avoid contact with eye and skin, once contacted, flush with water.
It has good dispersant performance against carbonate and scale inhibition for phosphate. it has good thermal stability, can be used under high temperature (300 centigrade). MA/AA has good compatibility when used together with other agents. MA/AA is widely used in low-pressure boiler, centralized heating, centralized air-conditioner and circulating cool system. It can also be used as chelating dispersants in woven and dyeing fields. Specification: Water treatment agent Accessory detergent Appearance: Clear brown liquid amber transparent liquid Solid content: 48% min 50 %min Free monomer (MA): 9.0% max 5.0% max Density (20fª): 1.18 g/cm3min 1.18 g/cm3min pH(1% solution): 2.0~3.0 2.0+/-1.0 Usage: MA/AA is used in circulating cool water system, medium or lower pressure boiler and distillation system in which high temperature is usually encountered. MA/AA can be used alone or together with other organic phosphates. When used together, the dosage of 2-10mg/L is preferred. The dosage for use as woven & dyeing and accessory detergent should be determined by experiments. Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for one year in room shady and dry place.
Cas 26677-99-6 Properties: Ma/aa is a low molecular weight polyelectrolyte, a copolymer of maleic anhydride and acrylic acid. It has good dispersant performance against carbonate and scale inhibition for phosphate. It has good thermal stability, can be used under high temperature (300ª). Ma/aa has good compatibility when used together with other agents. Ma/aa is widely used in low-pressure boiler, centralized heating, centralized air-conditioner and circulating cool system. It can also be used as chelating dispersants in woven and dyeing fields. Specification: Items water treatment agent accessory detergent Appearance clear brown liquid amber transparent liquid Solid content % 48 min 50 min Free monomer (ma) % 9.0 max 5.0 max Density (20ª)g/cm3 1.18 min 1.18min Ph(1% solution) 2.0~3.0 2.0a1.0 Usage: Ma/aa is used in circulating cool water system, medium or lower pressure boiler and distillation system in which high temperature is usually encountered. Ma/aa can be used alone or together with other organic phosphates. When used together, the dosage of 2-10mg/l is preferred. The dosage for use as woven & dyeing and accessory detergent should be determined by experiments. Package : Normally in 250kg net plastic drum, ibc drum can also be used as required.
Polyquaternium-51 INCI Name: POLYQUATERNIUM-51 Molecular Formula: C19H36NO8P Molecular Weight: 437.47 Appearance: Colorless transparent liquid Purity: 98% CAS NO.: 125275-25-4 EINECS No.: 433-120-0 Application: cosmetics and skin care products Supplier: ZHENYIBIO Polyquaternium-51 (Polyquaternium-51) chemical name: methacryloxyethyl phosphorylcholine-n-butyl methacrylate, is a synthetic bionic material of cell membrane structure, with phospholipids in the cell membrane The polar group of acylcholine is a copolymer composed of 2-methacryloyl hydroxyethyl phosphatidylcholine (MPC) and monomeric hydrophobic butyl methacrylate. Polyquaternium-51 has super moisturizing properties, its moisturizing properties are twice that of hyaluronic acid, and can alleviate the irritation of surfactants, so it is widely used in cosmetic moisturizer raw materials and medical aesthetics. Polyquaternium-51 is an efficient and mild moisturizing factor with excellent water-locking and moisturizing properties. It can effectively lock the moisture of the skin and hair, and its moisturizing properties will not be reduced after multiple washings. After the product containing polyquaternium-51 is applied, its ingredients can form a respirable biofilm on the surface of the skin, which simulates the stratum corneum to give the skin an extra layer of protection, effectively inhibits the irritation of surfactants on the skin, and can Improve rough skin, smooth and delicate skin, and enhance the skin's absorption of active ingredients.
Products Description Adipic acid is an important organic dibasic acid with the structural formula HOOC(CH2)4COOH. It can undergo salt-forming reaction, esterification reaction, amidation reaction, etc., and can be polycondensed with diamine or diol to form high molecular polymer. Adipic acid is an industrially important dicarboxylic acid. It plays an important role in chemical production, organic synthesis industry, medicine, and lubricant manufacturing. Its output ranks second among all dicarboxylic acids. Application 1. Adipic acid is mainly used in the production of nylon fibers and engineering plastics. 2. It is also widely used in the production of polyurethane and other esters, most of which are used in the production of PU, shoe sole slurry, polyurethane foam, etc., and a small part is used as advanced lubricating oil. 3. Higher esters of adipic acid can be used as plasticizers for polyvinyl chloride and its copolymers, and natural synthetic rubber. 4. A large amount of adipate is used in polyvinyl chloride for food packaging, film and insulation. 5. Adipic acid is also used as an acidulant for various foods and beverages.
