Safety Auto-retractable Syringe
EO Sterilization
Specification 3cc
Components: barrel, plunger, needle holder, sterile needle, needle protective sheath, self-disable parts and other accessories parts. Mode: 1ml, 3ml, 5ml and 10ml Instructions for use: 1) after tearing the container, take the syringe out and screw the needle holder on tightly. 2) after removing the protective cap, draw up liquid medication into the syringe and force the air of the syringe before application. 3) when the syringe plunger is at the zero mark, pull the needle straight out of the skin. 4) press the plunger, the needle will retract into the bottom of the syringe to achieve the self-destruct effectiveness.
Components: barrel, plunger, needle holder, sterile needle, needle protective sheath, self-disable parts and other accessories parts. Mode: 1ml, 3ml, 5ml and 10ml Instruction for use: 1)after tearing the container, take the syringe out and screw the needle holder on tightly. 2)after removing the protective cap, draw up liquid medication into the syringe and force the air of the syringe before application. 3)when the syringe plunger is at the zero mark, pull the needle straight out of the skin. 4) retract the plunger to the bottom of the syringe after application and break the plunger.
Auto Diable self-destructive  Syringe with needle It has self-destructive charcateristics. When the expected dose of the drug is injected, the self-destructive performance will automatically take effect, effectively prevent the reuse of syringes, avoild cross-infection and improve the safety of clinical injection.
Safety Slide Insulin Syringe EO Sterilization Refer Standards EN ISO 8537:2007 Sterile single-use syringes, with or without needle, for insulin. EN ISO 9626:1991 / AMD. 1: 2001 Stainless steel needle tubing for the manufacture of medical devices AMENDMENT 1. ASTM F88/F88M-09 Standard Test Method for Seal Strength of Flexible Barrier Materials. ASTM F1140/F1140M -13 Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages. ISO 10993-7:2008 Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals. USP 37- NF32 2014: U.S. Pharmacopeia National Formulary.
Place of origin: china Quantity: minimum order 100, 000 pieces Packaging: primary packaging in poly or blister package, middlly in paper boxes, finally in cartons Price: fob ningbo/shanghai us $ 0.05-0.15 per piece Classification: health & beauty - medical supplies Product descpription: 1. Sterile, single use, non-toxic, pyrogen-free. 2. The barrel is transparent enough to help the user observe the mixture and liquid flow easily. 3. The indelible graduation makes the reading easy. 4. The distance between finger grips and barrel is according to the iso standards, it can guarantee an easy grip. 5. The nozzle and special plunger tip, make the products with very less dead space. 6. Sterilized by ethylene oxide gas (eog), according to en550 standard. 7. After single use, the plunge will be locked with the needle. And draw the needle in barrel. The plunger can be broken easily after draw the needle in barrel, by this design principle, this product is real safety, cant hurt nurse or doctor. 8. This design dont need extra power to push the plunge to bottom of barrel till locked. So without shake when the needle in the muscle, then, no extra pain. 1ml, 2.5ml, 5ml, 10ml, 20ml, 30ml, 50ml. Packaging: primary packaging in poly or blister package, middlly in paper boxes, finally in cartons
The safety syringe is up to the trba250 regulation. When all medication has been dispensed, the operator can determine needle retracting time through releasing his pressed thumb after injection, which guarantees the syringe not to be used again. And the syringe has a low waste space.
Supplier: Needle retractable safety syringe, auto disable syringe