Specification
Ambient Environment
Operating Temperature: -10ípC to 50ípC
Temperature compensation: -10ípC to 50ípC
Storage Temperature: -20ípC to 70ípC
Relative humidity: < 95%
Atmospheric pressure: 0.86~1.06 bar
Re-calibration period: One year (recommend)
Media Compatibility
-1~ 2.5 bar: Clean dry non-corrosive gases.
4~ 2500 bar: media compatible with 316L SS.
Over pressure warning: 120%
Pressure units:
Pa, KPa, KGF/cm2, inH2O, mmH2O, PSI, mbar, bar, MPa (In order to avoid the readings to overflow or too low to read, only some of pressure units are selected)
Accuracy:
0.02%F.S accuracy over ranges to 600 bar; 0.1%F.S accuracy over ranges to 2500 bar, permits use in most environments without degradation of accuracy.
Dimension:
Calibrator head only: ª+120mmí-46mm,
Total height: 184mm
Weight:
Net weight: 0.7kg (differential type: 0.8kg)
Gross weight: 1kg
The model const131 hydraulic hand pump is a dual pressure source with the ability to easily adjust and stabilize. This hand pump possesses both 90% vacuum and positive pressure 9000 psi; uses oil or deionized water as the media, and can adjust the pressure easily and stably.
In order to avoid the enhance pressure seal ability, the const131 didnÆt use the check valve (non-return valve) but use the helicoidal pump, that makes the const131 is very easy for pressurizing and is much better than other pliers hand pumps.
The adjusting resolution is up to 100 pa (1 mbar). These features make the const131 ideal for calibrating pressure transducers, precision pressure gages, and other pressure instruments.
Connection
Direct connection
If the connector of the unit under test is m20*1.5, please connect it with the hand pump directly.
Connect by pipe
If the connector of the unit under test is not m20*1.5, please use the other adapter to connect.
Specifications
Media: oil or deionized water
Generated pressure range: 13.5 psi (0.9bar) vacuum to 9000psi (600bar) positive pressure
Pressure resolution: 100pa; 1 mbar
Material:
Ram/adapters: 316 ss;
Body: steel/aluminum;
Seals: buna-n.
Test gage connection: m20*1.5; 1/2+ npt with included adapters.
Reference gage connection: m20*1.5; 1/2+ npt with included adapters.
Height: 47.24+ (120 mm);
Base: 98.43+ (250 mm) x 55.12+ (140 mm).
Weight: 3.31 lb (1.5 kg).
A high¬\accuracy, high¬\resolution Industrial digital pressure gauge
Instead of the dial gauge completely.
Micro power consumption it can operate 2,000 hours continuous.
The all new ConST211 is a high¬\accuracy, high¬\resolution Industrial pressure indicator. Because of their robust design, these gauges meet stringent demands and can be used in critical industrial applications where particular importance is attached to measuring accuracy, reproducibility, long term stability and protection against dust penetration. The ConST211 Digital Pressure indicator has an accuracy of 0.05% of the calibrated span which is fully temperature compensated across the range of ¬\10ípC to 50ípC.
Features:
Use advanced micro power consumption. Battery supply power to 2,000 hours of continuous operation
Measure the pressure 3 times per second
Stainless steel or Inconel pressure cavity for aggressive
ConST Digital Pressure indicator CE compliance proves perfect EMC ability.
Large, easy¬\to¬\read display with 5 digit resolution
Stainless steel or Inconel pressure cavity for aggressive media
Applications
Field gauge calibration
Permanent outdoor installation
Burst disc testing
Pressure safety valve (PSV) testing
Hydraulic torque wrench indication
Torque data logging
Pressure regulator testing
Pipeline static pressure testing
Pressure regulator testing
Pressure switch testing
Wellhead monitoring
Filter performance testing
Hydrostatic leak testing
Dimensions
112mm diameter x 35mm, total 178mm height
Weight
580 gram approximate
