Silicon rubber heaters have wire-wound or etched foil heating elements protected by
Fiberglass-reinforced silicon rubber vulcanized and compressed at high temperature and press.
They are thin, bendable and shaped to fit almost any equipment. Heat can be applied to the
Most complex shapes, geometries, curves and pipes conceivable without sacrificing efficiency or
Dependability.
Techical parameters:
1 maximum temperature resistance of insulatorú¦300íµ
2 maximum operation temperatureú¦ 250íµ
3 insulation resistanceú¦í²500 mª+/dc 1000v
4 breakdown voltageú¦í² ac1500v/5s
5 capacity toleranceú¦ía5%
6 temperature range: -60íµí¬250íµ continuous heating; heating element: available with either
Etched foil or wire-wound elements:
7 dimension:maximum 1.2míßxm minimun 15mmíß15mm; thickness 1.5mmú¿thinnest 0.8mmú¼
Thickest 4.5mmlead wire length:standard 130mm.
Installation:
1 with backing psa (pressure sensitive adhesive or called self adhesive, self stick adhesive)
As 3m psa
2 with vulcanization or curing and compression at high temperature and press
3 with spring and hole or eyelet
4 with clamps
Benefits:
1 heating evenly, accurate and adjustable
2 various shapes, holes, cutouts, profiled watt densities and multiple voltages
3 put heat exactly where it is required
4 high dielectric strength, flexibility, bendable and cost effectiveness.
5 resistance to temperature extremes, moisture, weathering, radiation, fungus and chemical
Attack
6 heat can be applied to the most complex shapes, geometries, curves and pipes conceivable
Without sacrificing efficiency or dependability.
7 easily bonded and/or mechanically mounted, even onto the curving surface.
Honeywon»s silicone sponge is with high grade silicone rubber material and inimitable technique, with
Good character of high temperature resistant, aging resistant, ozone resistant, insulation property, fuel
Oil resistance, lubes resistance, no smell and wear well. High compressibility and low compression set
Over a wide temperature range, and good acoustic and thermal insulation properties. Apply to -50µ
~+200µ protect and heat insulation for long term continuous use and -70µ ~ +260µ for intermittent
Use on all kinds of machine.
Feature:
Standard size(mm)+ 290*380*¿5-15) 380*380*(5-15) 400*600*(5- 15) 500*500*(2-30)
500*600*(5-15) 600*800*(5-15) 1000*1000*(5-12) 1000*1200*(5-12)
Special size(mm)+minimum length:no limitation maximum length:no limitation, or in roll
Minimum width:no limitation maximum width:1200 minimum thickness:3.0 maximum
Thickness:30.0
Product color+ red¼grey¼natural, white¼black or any other required color
Application+ heat transfer print equipment, electronics and electrics, machine and sealcharacter+high temperature resistant, aging resistant, ozone resistant, insulation property, fuel oil
Resistance, lubes resistance, no smell and wear well, good acoustic and thermal insulation properties.
+ technical index¦
Style¦ open cell
Surface¦double fabric impression
Tear strength¦55kn/m
Press strength+30mpa
Elongation¦100%
Hardness¦8-50 shore a
Temperature range¦-50-220c continuously; -70µ ~ +260µ for intermittent use
Density¦0.55-0.9g/cm3
Flame resistance¦94v-0
Dielectric breakdown voltage¦>3kv
Dielectric constant¦5.5 khz
Tensile strength: 10-30psi
Volume resistance¦1.*1011 ohm-m
Thermal conductivity¦0.1 w/m-k
Thick tolerance: a0.05mm~0.1mm
Silicon rubber heaters have wire-wound or etched foil heating elements protected by
Fiberglass-reinforced silicon rubber vulcanized and compressed at high temperature and press.
They are thin, bendable and shaped to fit almost any equipment. Heat can be applied to the
Most complex shapes, geometries, curves and pipes conceivable without sacrificing efficiency or
Dependability.
Techical parameters:
1 maximum temperature resistance of insulator¦300íµ
2 maximum operation temperature¦ 250íµ
3 insulation resistance¦í²500 mª+/dc 1000v
4 breakdown voltage¦í² ac1500v/5s
5 capacity tolerance¦ía5%
6 temperature range: -60íµí¬250íµ continuous heating; heating element: available with either
Etched foil or wire-wound elements:
7 dimension:maximum 1.2míßxm minimun 15mmíß15mm; thickness 1.5mm¿thinnest 0.8mm¼
Thickest 4.5mmlead wire length:standard 130mm.
Installation:
1 with backing psa (pressure sensitive adhesive or called self adhesive, self stick adhesive)
As 3m psa
2 with vulcanization or curing and compression at high temperature and press
3 with spring and hole or eyelet
4 with clamps
Benefits:
1 heating evenly, accurate and adjustable
2 various shapes, holes, cutouts, profiled watt densities and multiple voltages
3 put heat exactly where it is required
4 high dielectric strength, flexibility, bendable and cost effectiveness.
5 resistance to temperature extremes, moisture, weathering, radiation, fungus and chemical
Attack
Honeywoní»s silicone sponge is with high grade silicone rubber material and inimitable technique, with
Good character of high temperature resistant, aging resistant, ozone resistant, insulation property, fuel
Oil resistance, lubes resistance, no smell and wear well. High compressibility and low compression set
Over a wide temperature range, and good acoustic and thermal insulation properties. Apply to -50í
~+200í protect and heat insulation for long term continuous use and -70í ~ +260í for intermittent
Use on all kinds of machine.
Feature:
Standard size(mm)í+ 290*380*ú¿5-15) 380*380*(5-15) 400*600*(5- 15) 500*500*(2-30)
500*600*(5-15) 600*800*(5-15) 1000*1000*(5-12) 1000*1200*(5-12)
Special size(mm)í+minimum length:no limitation maximum length:no limitation, or in roll
Minimum width:no limitation maximum width:1200 minimum thickness:3.0 maximum
Thickness:30.0
Product colorí+ redú¼greyú¼natural, whiteú¼black or any other required color
Applicationí+ heat transfer print equipment, electronics and electrics, machine and sealcharacterí+high temperature resistant, aging resistant, ozone resistant, insulation property, fuel oil
Resistance, lubes resistance, no smell and wear well, good acoustic and thermal insulation properties.
í÷ technical indexú¦
Styleú¦ open cell
Surfaceú¦double fabric impression
Tear strengthú¦55kn/m
Press strengthú+30mpa
Elongationú¦100%
Hardnessú¦8-50 shore a
Temperature rangeú¦-50-220c continuously; -70í ~ +260í for intermittent use
Densityú¦0.55-0.9g/cm3
Flame resistanceú¦94v-0
Dielectric breakdown voltageú¦>3kv
Dielectric constantú¦5.5 khz
Tensile strength: 10-30psi
Volume resistanceú¦1.*1011 ohm-m
Thermal conductivityú¦0.1 w/m-k
Thick tolerance: ía0.05mm~0.1mm
Honeywon's silicone sponge is with high grade silicone rubber material and inimitable technique, with
Good character of high temperature resistant, aging resistant, ozone resistant, insulation property, fuel
Oil resistance, lubes resistance, no smell and wear well. High compressibility and low compression set
Over a wide temperature range, and good acoustic and thermal insulation properties. Apply to -50C
~+200C protect and heat insulation for long term continuous use and -70C ~ +260C for intermittent
Use on all kinds of machine.
Feature:
Standard size(mm):+ 290*380*(5-15) 380*380*(5-15) 400*600*(5- 15) 500*500*(2-30)
500*600*(5-15) 600*800*(5-15) 1000*1000*(5-12) 1000*1200*(5-12)
Special size(mm):+minimum length:no limitation maximum length:no limitation, or in roll
Minimum width:no limitation maximum width:1200 minimum thickness:3.0 maximum
Thickness:30.0
Product color:+ red/grey/natural, white/black or any other required color
Application: + heat transfer print equipment, electronics and electrics, machine and sealcharacter: +high temperature resistant, aging resistant, ozone resistant, insulation property, fuel oil
Resistance, lubes resistance, no smell and wear well, good acoustic and thermal insulation properties.
technical index:
Style:open cell
Surface:double fabric impression
Tear strength:55kn/m
Press strength:+30mpa
Elongation:100%
Hardness:8-50 shore a
Temperature range:-50-220c continuously; -70C ~ +260C for intermittent use
Density:0.55-0.9g/cm3
Flame resistance:94v-0
Dielectric breakdown voltage:>3kv
Dielectric constant:5.5 khz
Tensile strength: 10-30psi
Volume resistance:1.*1011 ohm-m
Thermal conductivity:0.1 w/m-k
Thick tolerance: a0.05mm~0.1mm
Silicon rubber heaters silicone rubber heating pad silicone heat pad silicone heating mat silicone heating blanket silicone flexible heaters have wire-wound or etched foil heating elements protected by
Fiberglass-reinforced silicon rubber vulcanized and compressed at high temperature and press.
They are thin, bendable and shaped to fit almost any equipment. Heat can be applied to the
Most complex shapes, geometries, curves and pipes conceivable without sacrificing efficiency or
Dependability.
Techical parameters:
1 maximum temperature resistance of insulator:250C
2 maximum operation temperature: 250C
3 insulation resistance:500 m ohm+/dc 1000v
4 breakdown voltage: ac1500v/5s
5 capacity tolerance:5%
6 temperature range: -60~250C continuous heating; heating element: available with either
Etched foil or wire-wound elements:
7 dimension:maximum 1.2m x minimun 15mm; thickness 1.5mm; thinnest 0.8mm
Thickest 4.5mmlead wire length:standard 130mm.
Installation:
1 with backing psa (pressure sensitive adhesive or called self adhesive, self stick adhesive)
As 3m psa
2 with vulcanization or curing and compression at high temperature and press
3 with spring and hole or eyelet
4 with clamps
Benefits:
1 heating evenly, accurate and adjustable
2 various shapes, holes, cutouts, profiled watt densities and multiple voltages
3 put heat exactly where it is required
4 high dielectric strength, flexibility, bendable and cost effectiveness.
5 resistance to temperature extremes, moisture, weathering, radiation, fungus and chemical
Attack
Honeywon's silicone sponge Silicone rubber foam pad silicone rubber sponge sheet silicone rubber sponge mat silicone rubber sponge blanket silicone rubber foam mat silicone rubber foam blanket is with high grade silicone rubber material and inimitable technique, with
Good character of high temperature resistant, aging resistant, ozone resistant, insulation property, fuel
Oil resistance, lubes resistance, no smell and wear well. High compressibility and low compression set
Over a wide temperature range, and good acoustic and thermal insulation properties. Apply to -50C
~+200C protect and heat insulation for long term continuous use and -70C ~ +260C for intermittent
Use on all kinds of machine.
Feature:
Standard size(mm):+ 290*380*(5-15) 380*380*(5-15) 400*600*(5- 15) 500*500*(2-30)
500*600*(5-15) 600*800*(5-15) 1000*1000*(5-12) 1000*1200*(5-12)
Special size(mm):+minimum length:no limitation maximum length:no limitation, or in roll
Minimum width:no limitation maximum width:1200 minimum thickness:3.0 maximum
Thickness:30.0
Product color:+ red/grey/natural, white/black or any other required color
Application: + heat transfer print equipment, electronics and electrics, machine and sealcharacter: +high temperature resistant, aging resistant, ozone resistant, insulation property, fuel oil
Resistance, lubes resistance, no smell and wear well, good acoustic and thermal insulation properties.
technical index:
Style:open cell
Surface:double fabric impression
Tear strength:55kn/m
Press strength:+30mpa
Elongation:100%
Hardness:8-50 shore a
Temperature range:-50-220c continuously; -70C ~ +260C for intermittent use
Density:0.55-0.9g/cm3
Flame resistance:94v-0
Dielectric breakdown voltage:>3kv
Dielectric constant:5.5 khz
Tensile strength: 10-30psi
Volume resistance:1.*1011 ohm-m
Thermal conductivity:0.1 w/m-k
Thick tolerance: a0.05mm~0.1mm
Silicon rubber heaters Silicone rubber heaters silicone rubber heating pad silicone heat pad silicone heating mat silicone heating blanket silicone flexible heaters have wire-wound or etched foil heating elements protected by
Fiberglass-reinforced silicon rubber vulcanized and compressed at high temperature and press.
They are thin, bendable and shaped to fit almost any equipment. Heat can be applied to the
Most complex shapes, geometries, curves and pipes conceivable without sacrificing efficiency or
Dependability.
Techical parameters:
1 maximum temperature resistance of insulator:250C
2 maximum operation temperature: 250C
3 insulation resistance:500 m ohm+/dc 1000v
4 breakdown voltage: ac1500v/5s
5 capacity tolerance:5%
6 temperature range: -60~250C continuous heating; heating element: available with either
Etched foil or wire-wound elements:
7 dimension:maximum 1.2m x minimun 15mm; thickness 1.5mm; thinnest 0.8mm
Thickest 4.5mmlead wire length:standard 130mm.
Installation:
1 with backing psa (pressure sensitive adhesive or called self adhesive, self stick adhesive)
As 3m psa
2 with vulcanization or curing and compression at high temperature and press
3 with spring and hole or eyelet
4 with clamps
Benefits:
1 heating evenly, accurate and adjustable
2 various shapes, holes, cutouts, profiled watt densities and multiple voltages
3 put heat exactly where it is required
4 high dielectric strength, flexibility, bendable and cost effectiveness.
5 resistance to temperature extremes, moisture, weathering, radiation, fungus and chemical
Attack
