Feature:
1. Satellite finder of king around the world
2. NIT function
3. Constellation diagram function
4. Display:3.5 inch high quality TFT LCD TV
5. Audio output:Built in speaker with volume control
6. New FAST Spectrum Analyzer
7. DiseqC switch 8 ways
8. Motor control diseqc 1.0/1.2/usals
9. Unicable standard-1.2.3.4 SCR0,1,2,3
10. All LNB types supported
11. Very sensitive new tuner
12. Calibrated meter to industry standards
13. Test:CBER,VBER,C/N Signal quality and strength
14. Pre-store the channel list from all over the world.
Technical data:
1.Frequency range: 950MHz~2150MHz
2.Signal level range: -65dBm~-25dBm
3.Symbol rate:2Msps~45Msps
4.RF input connector: F type
5.Input resistance: 75ohm
6.22KHz Signal: 22KHzí+2KHz
7.Support DiseqC
8.Items of measurement :QPSK signal level, Bit error rate, carrier rate
9.Storage: 40 value of measurement, 80 configuration data,10 spectrum data
10.Support Constellation diagram
11.Mode of satellite finding: sound and colour 3.5¿òTFT
12.Displayed information:Satelliteí»s Azimuth,Elevation,Polarization
13.LNB power supply: Horizontal polarization:+18V,¿Q400mA
Vertical polarization:+13V, ¿Q400mA
14.Total power: 8W
15.Working time: 3~4hours
16.Connector: Rs232 or USB(Optical)
17.Working temperature: 0~40íµ
18.Storage temperature: -20~70.
Carton
Features:
1. 3.5 TFT color LCD display.
2. Monitor the video.
3. Analyze Digital channel (Power level, Constellation diagram, MER,BER and etc.).
4. Analyze Analog channel (LEVEL C/N and etc.).
5. Support all QAM modes (16QAM, 32QAM, 64QAM, 128QAM, 256QAM).
6. Support DVB-C/ITU-T J.83-Annex A/B/C.
7. Spectrum analysis.
8. Small, light, really portable.
Specifications:
A. Digital channels Measurement:
Tuning range: from 5M~862MHz
Tuning mode: by channels or by frequency
Support: 16/32/64/128/256QAM
Digital power: 40dBª¦V-110dBª¦V
Accuracy: 2dB
Bandwidth: Adjustable
MER (modulation error ratio) measurement range: 19~40dB for 64QAM
Accuracy: í+2dB
BER (bit error rate) Measured before RS decoding:
Measurement range: 1.0E-2 to 1.0E-8
Symbol rate: 1MS/S-7MS/S
Modulations type: 16/32/64/128/256QAM
DVB-C/ITU-TJ.83-AnnexA/B/C
B. Analogue channels Measurement:
Frequency/Channel:
Tuning range: from 5M~862MHz
Tuning mode: by channels or by frequency
Channel range: China standard channel and append Channel
International Channel: Download and add as needed
Resolution: 10KHz
Bandwidth: 280kHzí+50kHz
Level measurement:
Range: 25dBª¦Ví½120dBª¦V
Accuracy: í+1.5 dB ( 0íµí½40íµ )
Resolution: 0.1dB
Demodulate method: Peak value demodulate
Input impedance: 75.
Carton.
By using the method of Optical Domain Reflection technology, the SF-2010 Mini OTDR can meets the most demanding test requirements of optical fiber fault location. From the Power-On state, the SF-2010 provides the fastest and easiest solution on the market for determining the fiber length or fault location. Along with handheld and portable design, fully automated, one-button operation makes it the ideal mode for the users.
This instrument widely used in application of fiber length measurement, fiber networks construction and maintenance, optical communication system, fiber CATV networks, security and surveillance systems, fiber cable project and so on.
The SF-2010 is versatile, user-friendly instrument, maximum 5 fault events display, and auto-shutdown in 3 minutes, lower power alarm functions; SF-2010 is the most suitable fiber fault locator beyond other competitive products.
Specification:
1.Connector Type FC/APC
2.Light Source FP laser diode
3.Wavelength 1550nm
4.Fiber Type G652 single mode
5.Precisioní+10m(Reflection point)ú¼í+200m(No reflection point)
6.Minimum dead zone20m
7.Max distance 30km
8.Resolution 0.001km
9.Display unit km.
VFL:
1.Wavelength 650nm
2.Power Out 1mW
3.Connector Type Universal Connector.
Battery:
1.Battery Type: 2 AA alkaline battery
2.Continuous operating time(@25íµ)>1000times or VFL continuous working 10hours
3.Auto power off 3min.
Environmental:
1.Operating temp 0íµ to +40íµ
2.Storage temp -20íµ to +70íµ
3.Humidity 0 to 95úÑú¿no frozen.
Physical:
1.Dimensions(mm): 157 x 86 x 40
2.Weight(kg): 0.25.
Carton.
SF2011 ( Mini OTDR ) Optical Fiber Ranger
By using the method of Optical Time Domain Reflection technology, the SF-2011 Mini OTDR can meets the most demanding test requirements of optical fiber fault location. From the Power-On state, the SF-2011 provides the fastest and easiest solution on the market for determining the fiber length or fault location. Along with handheld and portable design, fully automated, one-button operation makes it the ideal mode for the users.
Features:
1,Portable, rugged, lightweight; Easy to use.
2,Built-in visual fault locator (VFL), conveniently to find the faults in dead zone.
3,Long battery life, up to 5000 measurements operation.
4,Automatic Pulse Width Control design to ensure a convenient operation.
5,Testing the distance of the fiber and identify the faults location in the fiber link.
6,Locates reflective and non-reflective breaks in the fiber network.
7,Support USB to transmit the data.
Specification:
Connector Type: FC/APC FC/PC
Light Source: FP laser diode
Wavelength:1550nm,1310nm
Fiber Type: 9/125um single mode
Precision:¡À10m(Reflection point),¡À200m(No reflection point)
Minimum dead zone: 10m
Max distance: 80km 50km
Resolution: 0.001km
Display unit: km
VFL
Wavelength: 650nm
Power Out: 1mW
Connector Type:Universal Connector
Battery
Battery Type: 2 AA alkaline battery
Continuous operating time(@25¡ãC):>1000times or VFL continuous working 10hours
Auto power off: 3min
Environmental
Operating temp: 0¡ãC to +40¡ãC
Storage temp: -20¡ãC to +70¡ãC
Humidity: 0 to 95%(no frozen)
Physical
Dimensions(mm): 157 x 86 x 40
Weight(kg): 0.25.
Description:
SX503 Handheld Optical Power Meter is a self-developed test instrument Which is widely used for installation, operation and maintenance of fiber-optic network. It features smart appearance, backlight, auto-shutdown and widely dynamic range, good testing precision and universal optical connector for FC/SC/ST.
Features:
1. High sensitivity, large dynamic range
2. universal connector interface: FC/SC/ST-LC/MU.
3. Quick response, without warm-up and reduce testing time
4. Low-voltage display function
5. Optional auto-shutdown feature
6. Automatic calibration function
7. The relative ratio test
8. Large LCD display and backlight
Application:
1. Maintenance Telecom
2. Maintenance CATV
3. Test Lab of Fiber Optic
4. Optical fiber sensors
Specifications:
Type
SX503A
SX503B
Wavelength(nm)
800~1650
Detector
InGaAs
Optical Connector
FC SC ST/ Universal 2.5mm adaptor (LC,MU can be optional )
Measurement Range(dBm)
-70~+10
-50~+26
Uncertainty
¡À5%
Standard Wavelength(nm)
850,1300,1310,1490,1550,1625
Resolution(dB)
0.01
Power Supply
3pcs AAA 1.5V batteries
working time(h)
120 hours
Operating Temperature(¡ãC)
-10~+50
Storage Temperature(¡ãC)
-20~+70.
Weight:160g.
