Features:
1.built in adjustable Gain & Slope
2. Built in power supply
3. Connectors:"F"type female
4. Output test point and screw terminal for equippotential bonding
5. Metal-Plastic Housing For indoor mounting
Specifications:
ModelAS205S
No.of Inputs3UHF, 1BIII, 1BI+FM
No.of Outputs2
Frequency UHF1: (MHz)470óª862
UHF2: (MHz)470óª862
UHF3: (MHz)470óª862
BIII: (MHz)174óª230
BI+FM: (MHz)47óª68/88óª108
Gain(UHF1,UHF2,UHF3,BIII,BI+FM) (dB)20
Output Level(UHF1,UHF2,UHF3,BIII) (dBuv)115
BI+FM: (dBuv)110
Slope Adj. (dB)20
Slope Adj.ú¼Typical (dB)15
Return Loss (dB)_óª12
Noise Figure (dB)<6
Test Point Attenuation (dB)_óª20
Power Supply (Vac/Hz) 90óª260/47óª63
Max AC Pass Current(switchable) (mA)1200
DC Pass (V)18
Operating Temperature Range (¿¼C)-20óª+60.
Features:
1.Wide band reception;
2.20dB gain flat through the whole band
3.Band-Stop filter against GSM noise
4.For both outdoor and indoor use
5.Reception for digital terrestrial TV and radio programmers
6.Sensitive electronic circuit for minimum noise
7.Both Horizontal and Vertical design for best reception.
Specifications:
ITEMDT90Frequency Range174~230MHz & 470~862MHz
Amplifier Gain174~230MHzí¦20dB & 470~862MHzí¦18dB
Frequency Flatnessí+ 2 dB
Directional charactersOver 20 dB
Output Cable 3C-2V cable; Length:1.5m;
Output Connector TypeIEC 169-2(m) & F(m) right angle
Power Consumption5V/30mA
Antenna Output Connector TypeF-(f) connector
WeightApprox. 200g
Size 190 x 130 x 61 (mm).
Features:
1.With 8 selectable channels (Dip Switch)
2.Transmit the crisp A/V signal with radio frequency
3.With 5.8GHz antennas embedded into housing
4.Remote control the A/V source with IR extender
5.Compatible with Camcorder or CMOS camera application
6.NTSC / PAL video format available.
Specifications:
ITEM501T501R
5.8GHz antennaDirectional flat antennaDirectional flat antenna
433MHz antennaExternal omni-directional antennaInternal Omni-directional antenna
Transmit power17dBm(Typical)-
Sensitivity--86dBm type
Frequency band5.725GHz~5.865GHz5.725GHz~5.865GHz
Channel Customer8 selectable channels8 selectable channels
Input formatAvailable in NTSC or PAL-
Output format-Available in NTSC or PAL
Video input level1 Vp-p@75Ω-
Audio input level1 Vp-p@600Ω-
Video output level-1 Vp-p@75Ω
Audio output level-1 Vp-p@600Ω
Input / output ConnectorMINI DIN jackMINI DIN jack
Operating conditionIndoor usage recommendIndoor usage recommend
Remote control frequency433.92MHz433.92MHz
IR carrier frequency32~38KHz32~38KHz
Power Consumption9Volt DC, 300mA(Typical)9Volt DC, 300mA(Typical)
Operating Temperature-10℃ ~ +60℃-10℃ ~ +60℃.
Features:
1.Cost effective for your own local CATV system
2.A/V output for widely application
3.Humanized design, easy to install, easy to operate
4.VHF / UHF operating frequency
5.Output level adjustable
6.Audio Output Level Adjustable
7.Channel digital display
8.Output Channel Selectable.
Specifications:
ITEMM64
StandardPAL /NTSC
Frequency RangePAL ú¦CH2~CH4íóS1~S10íóCH5~CH12íóS11~S41íóCH21~CH69
NTSCú¦002~136
Bandwidth6MHzíó7MHzíó8MHz
Output Impedance75OHm
Output level80~95dBuV
Input Level0.77Vp-p for 80%+/-10% modulation
Sound systemM=4.5MHzíóB/G=5.5MHzíóI=6.0MHzíóD/K=6.5MHz
Isolation From Modulator to CATV inmore than 30dB
Insertion Lossless than 1.5dB
A/V connectorScart female
RF InputF female
RF OutputF female
Power Consumption9Volt DC, 300mA
Operating Temperature-10íµ ~ +60.
Features:
1. 16satellite IF+ 1 Terrestrial inputs
2. Versions for 16 subscriber outputs
3. Built in Amplifiers circuit to compensate cable loss
Sheet metal housing.
Specifications:
Model MS1716E
No.of Inputs 16Sat.ú¼1Terr.
No.of Outputs 16
Frequency Satellite: (MHz) 950-2150
Terrestrial: (MHz) 47-862(OEM:5-862)
Sat.Loss (dB) 3
Terr.Gain (dB) 0
Switching Isolation (dB) 28
Isolation(Sat.)(out-out) (dB) 30
Isolation(Terr.)(out-out) (dB) 25
Rejection (dB) 28
Return Loss In (dB) 10
Out (dB) 8
Output Level Sat.(IMD3-35dB)(Tap) (dBuv) 100
Output Level Terr.(IMD3-60dB)(Tap) (dBuv) 82
Power Supply (Vac/Hz) 90í½260/47í½63
Max.Current Pass to LNB (mA) 1000.
