Our Y81 series hydraulic metal baling presses are drived by fully hydraulic power. This baling presses are mainly used in compressing the scattered plastic black and non-ferrous metal plates. It is very convenient for transportation and smelting. The baling presses adopted the electro hydraulic driver. They can be operated in both manual and automatic control modes. The operation is convenient and the performance is reliable. The mode of baling is side push. The baling block can be transported directly, so it will omit the porterage.--rogerweimail(at)sina(dot)com---
The technical features are as below:
1.the density of baling block is 2 T/M according to the requirement in third grade in conformity with GB4223-84 recycle Carbon Scrap Steel Category&Technique Terms.
2.the hydraulic station adopted the entirety type valve block, and its volume is small, and realize the partial non-pipe design, and it decrease the leakage.
3.the control valve adopted lishile series valves, changeover is stable and flexible, and noise is low.
4.optimizing the system design, assuring the oil temperature is not less than 55
5.the machine is driven by hydraulic system, and the electric system is automatically controlled by PLC.Controling is stable and modification is convenient.
6.the machine can be laid in the flattening concrete floor, and it needn't be made the foundation.
7.The discharge mode includes turn bag, push bag, fore push bag.
The T31 series forging manipulators include: straight moving type, turning around type, moving around type etc many moving types whale hydraulic press and mechanic-hydraulic mixed type, whole mechanism type etc many driving types. It can satisfy different requirements of customers. roger(at)chinesehammers(dot)com---
The forging manipulators can finish five kinds of motions: the vehicle walks freely on the tramroad, the frame of clamp can move ahead back, lift and drop, incline, turn around. The head of clamp can clamp, loose, rotate. The whole manipulator adopts whole frame structure, drived by motors and making wheels move freely; the link rod drived by oil cylinder or motor or steel wire wheel makes clamp life and drop and incline smoothly: the mouth of clamp fastens and looses completed by pulling rod drived by oil cylinder; the hollow axis makes the head of clamp rotate which is drived by hydraulic motor; the whole frame turns around which is drived by hydraulic motor; the frame of clamp is equipped with level and vertical butters. The speed of rotating part is controlled by hydraulic oil, and the rotating part is also with equipment to prevent surcharger.
Wooden case.
The pneumatic forging hammers are widely used for general Forging works like free or open die forging, such as drawing-out, upsetting, punching, chiseling, forge, welding, bending and twisting. They are also used for forge in bolster dies. And this hammer is the favorite tool to do wrought iron art works. As further, this hammer has get ISO and CE certifications.---roger(at)chinesehammers(dot)com---
The main features of pneumatic forging hammers are as follows:
1. Ready operation: economic and convenient
2. Easy to operate, by manipulating the hand lever or foot-pedal, all operating functions-idle run, top setting, pressing down, single blow, light or full series blow can be obtained as desired
3.A special oil-pump is provided for lubricating the cylinders. Prior to running, turn the hand-crank of the pump to get the cylinders being lubricated beforehand.
wooden case
The hydraulic forging hammer is a new energy saving and environmental protection forging hammer. It can save more than 90% energy comparing with the steam forging hammers and the forging hammers with compressor. --roger(at)chinesehammers(dot)com---
The pressure of compressed Nitrogen is constant, and the hammer is operated just by controling the hydraulic system. When you feed blanks, the hydraulic pressure will lift the hammer head. When you hit the blank, the hydraulic pressure will unload fastly and the pressure of compressed Nitrogen and the gravity will drive the hammer head to hit the blank at a very high speed.
The hydraulic forging hammer can promote the efficiency and production with good quality. The hammer has safety locking motion so that working is safe and convenient. As further, It can improve the working condition, which is environmental and good for workers.
The advantage, structure and design feature of hydraulic forging hammers is as follows,
1;Energy conservation and environmental protection.
2;The operation is convenience,lowering and the act is agility
3;System work safety,it has fully safety locking motion
4;Special structure is more fair and more safety.
wooden case.
Our ring rolling machines are the most excellent equipments for processing seamless ring forging such as: bearing ring, gear ring, rim, turning support, flange and high temperature alloy for aviation.
They are most extensively used in bearings and gears manufacturing, and also used in precise flange rings manufaturering for chemical engineering piping. They have the advantages of good dimensional precision, good circularity and economy of material. Bearing collars of different kinds, both internal and external are reamed to shape. The rollway and retaining edges on the collars are also reamed into shape at the same time.
The rolling machine can roll rings automatically. Only to set the dimensions of ring, semifinished ring, roll and material specification, then it can roll the ring and stop automatically. So it's very effective to promote your condition with high efficiency.
Rollers are necessary and very suitable to manufacture seamless ring forgings, bearing rings, bearing sleeve rings, groove support wheel forgings, gear rings, rim, turning support, flange forgings and high temperature alloy rings for aviation. And our ring rolling machines are widely used by industrial manufaturers all over the world, where they meet with customer's acclaim.
You will rest assured of its economic benefits and upgrading of your forging pressing technology once you have it. So I know the ring rolling machines will promote your business greatly. If you like, please visit our website and feel free to contact me. I'll write you back soon to what you're concerning with our best quotation. We are always glad to serve you.
