Water filter.
The slot :0.1mm-10mm.
I and basic parameters:
Materials: stainless steel 302,304,316,304 L, 316L sieve wire or low carbon steel galvanized wire.
Outer diameter: 4 inches, 6 inches, 8 inch, 10 inch, and 12 inches, etc. (20mm 1000mm) -
Gap: 0.1 mm - 35mm deviation: + 0.05 mm
standard length: 50-6000mm
End connections: silk buckle pipe head or direct pipe head
Sieve silk specification: 2.2x 3.0 mm, 2.3 * 3.0 mm, 3.0 * 4.6 mm, 3.0 * 5.0 mm, etc
Torre bar specification: 3.8 mm / 22 root, 3.8 mm / 32 root, 3.8 mm / 48 root, 3.8 mm / 50 root.
Special specifications on request (such as: in liquid, reflexed, etc.).
II and features:
1. Sift the cross-section are trapezoid. The width values dimension wedge graphics a 1.3, 1.6, 1.8, 2.0 and 3.0 2.2, 2.5, etc, due to sift the section for trapezoid, so aperture is always within the small, favourable filtering and washing. (against) in liquid
2 the section steel bar, circular wedge, shape, according to the user's different USES, can with screening the multiple collocation.
III, the properties of product:
1.the stable structure, high temperature corrosion resistance, mechanical performance is good, long service life, safe and reliable.
2 joints can be made into parallel joints, the common thread joint, taper tooth joints and trapezoidal tooth connectors.
3. Mainly used in oil, gas and water Wells sand control, mud filtering and other more medium can also be used in water treatment, water softening, petroleum products during terminal filtration and chemical acid organic solution of recycling filtering.
I, product use
Used for various pumping oil, gas and water Wells played sand protection, prolong production cycle pump function, improve productivity, wastewater treatment and chemical branch are available.
II, structure characteristics
Around the welding type stainless steel sieve tube is "V" type by large openings, 1Cr18Ni9Ti forming welded wire around the system, it is through control round wire the gaps between the role play sand control, around the welding stainless steel sieve tube with other types of sand control tube comparison, specific have higher flow capacity, high strength, corrosion resistance is out of shape not easily long life, safe and reliable, obvious effect, low cost, is a bit oil industry in the most effective sand control tools.
III, technical parameters
1. Specifications
Nominal size
2. Silk around width (gap) coefficient as follows: (units) mm:
0.1 0.15 0.20 0.25 0.30 0.35
0.40 0.45.50 0.75 1.00 1.25
3. Length factor as follows: (units) mm:
1000 1200 2000 4000 6000
IV, tie-in way
Welded loop joint thread silk buckle joint flange joint
V, sieve tube material
Stainless steel wire low carbon steel wire galvanized steel wireVI, filtration method Inside filter outside filtering (evaginate reflexed round wire evaginate).
I and basic parameters:
Materials: stainless steel 302,304,316,304 L, 316L sieve wire or low carbon steel galvanized wire.
Outer diameter: 4 inches, 6 inches, 8 inch, 10 inch, and 12 inches, etc. (20mm 1000mm) -
Gap: 0.1 mm - 35mm deviation: + 0.05 mm
Standard length: 50-6000mm
End connections: silk buckle pipe head or direct pipe head
Sieve silk specification: 2.2x 3.0 mm, 2.3 * 3.0 mm, 3.0 * 4.6 mm, 3.0 * 5.0 mm, etc
Torre bar specification: 3.8 mm / 22 root, 3.8 mm / 32 root, 3.8 mm / 48 root, 3.8 mm / 50 root
Special specifications on request (such as: in liquid, reflexed, etc.).
II and features:
1. Sift the cross-section are trapezoid. The width values dimension wedge graphics a 1.3, 1.6, 1.8, 2.0 and 3.0 2.2, 2.5, etc, due to sift the section for trapezoid, so aperture is always within the small, favourable filtering and washing. (against) in liquid
2 the section steel bar, circular wedge, shape, according to the user's different USES, can with screening the multiple collocation.
III, the properties of product:
1.the stable structure, high temperature corrosion resistance, mechanical performance is good, long service life, safe and reliable.
2 joints can be made into parallel joints, the common thread joint, taper tooth joints and trapezoidal tooth connectors.
3. Mainly used in oil, gas and water Wells sand control, mud filtering and other more medium can also be used in water treatment, water softening, petroleum products during terminal filtration and chemical acid organic solution of recycling filtering.
I, product use
Used for various pumping oil, gas and water Wells played sand protection, prolong production cycle pump function, improve productivity, wastewater treatment and chemical branch are available.
II, structure characteristics
Around the welding type stainless steel sieve tube is "V" type by large openings, 1Cr18Ni9Ti forming welded wire around the system, it is through control round wire the gaps between the role play sand control, around the welding stainless steel sieve tube with other types of sand control tube comparison, specific have higher flow capacity, high strength, corrosion resistance is out of shape not easily long life, safe and reliable, obvious effect, low cost, is a bit oil industry in the most effective sand control tools.
III, technical parameters
Woven Mesh Gabion Boxes Description:
Woven mesh gabion boxes are hexagonal and double-twisted wire-mesh structures.
The gabion boxes are divided into chambers by inserting diaphragms into every meter. The wire used for making the boxes is thickly plated mild steel. The gabion units are delivered to the site flat-packed.
The double-twisted mesh connections of the woven mesh prevent from coming apart if the wire is cut or snaped, in each case, the location of the fault is restricted to the neighbouring areas. The units are attached to each other when using stitching wire and/or staples.
Technical Characteristics:
The mesh/wire versions generally used are summarised in the table below. In order to reinforce the structure, all edges are strengthened with a thicker wire. For the sizes and size tolerances about different versions, please see the dimensions below:
Length (m)
Width (m)
Height (m)
1,0
0,5
0,5
1,5
1
0,5
2
1
0,5
3
1
0,5
4
1
0,5
1,5
1
1
2
1
1
3
1
1
4
1
1
Wire-mesh hole size
80 x 100 mm
Wire size
2,7 mm
Size tolerance of structures
Lenght
1,5 - 2,0 - 3,0 - 4,0 m ¡À 3%
Width
0,50 - 1,0 m ¡À 5%
Height
0,5 - 1,0 m ¡À 5%.
I and basic parameters:
Materials: stainless steel 302,304,316,304 L, 316L sieve wire or low carbon steel galvanized wire.
Outer diameter: 4 inches, 6 inches, 8 inch, 10 inch, and 12 inches, etc. (20mm 1000mm) -
Gap: 0.1 mm - 35mm deviation: + 0.05 mm
Standard length: 50-6000mm
End connections: silk buckle pipe head or direct pipe head
Sieve silk specification: 2.2x 3.0 mm, 2.3 * 3.0 mm, 3.0 * 4.6 mm, 3.0 * 5.0 mm, etc
Torre bar specification: 3.8 mm round wire or trapezoidal silk
II and features:
1. Sift the cross-section are trapezoid. The width values dimension wedge graphics a 1.3, 1.6, 1.8, 2.0 and 3.0 2.2, 2.5, etc, due to sift the section for trapezoid, so aperture is always within the small, favourable filtering and washing. (against) in liquid
2 the section steel bar, circular wedge, shape, according to the user's different USES, can with screening the multiple collocation.
III, the properties of product:
1.the stable structure, high temperature corrosion resistance, mechanical performance is good, long service life, safe and reliable.
2 joints can be made into parallel joints, the common thread joint, taper tooth joints and trapezoidal tooth connectors.
3. Mainly used in oil, gas and water Wells sand control, mud filtering and other more medium can also be used in water treatment, water softening, petroleum products during terminal filtration and chemical acid organic solution of recycling filtering.
