This machine have powered outfeed conveyor and powered conveyorized turntable system and is able to transport an wrapped load from the turntable to the outfeed conveyor if there is no wrapped load on the outfeed conveyor. The operator can start wrap cycle by remote control allowing the operator to do other tasks. This arrangement eliminates the need for operators to place unwrapped loads on the floor, then pick them up again when the turntable is clear. During the machine auto wrap one palletized load, the operator can get one new unwrapped load, if there is no pallet on turntable, operator can put the new one, then take the wrapped load from the outfeed conveyor to the warehouse. Compared to a single turntable system. It increase fork lift efficiency and reduce handling time.
Technology data
Wrapping size·+l*w·¼ ·+500~1200·¼f-·+500~1200·¼mm
Turntable diameter 1800mm
Turntable height 625mm
Turntable weight capacity 2000kg
Turntable speed 0-15rpm
Machine weight 700kg
Electrics 220v 50hz 1phase
Power 2.3kw
Air 0.4f¼0.6 mpa .
In bubble film or wooden crate
H series ring wrapper is a machine designed for packing bearing,metal band, Copper ring and similar materials manufactured in ring with strech film,wrapping paper.Packing surface is tidiness and beauty.It is completely moisture and dust proof packing and protects the products.
Technology parameters
ModelH1000L
Product width(mm)10-300
Product outside dia(mm)500-1000
product inner dia(mm)300-500
Packing material/width (mm)Composite punch tape 70-90
Packing material outside dia(mm)500
Packing speed (m/min)3185
Roller height(mm)435
Roller weight capacity(kg)2000
Power/voltage(kw/V)4kw/380v/50hz
Dimension(mm)1750+¼-1200+¼-1500
Machine weight(kg)980.
Stretch wrapping machines are used to wrap stretch film around a loaded pallet. Film provides extra support while the products are being transported & storaged to protect them from tip, spill or from being damaged. Additionally , wrapped loads can easily be separated and identified. Stretch pallet wrapper is widely used in chemical industry electronic industry building materials home appliances papermaking foodstuff & drink etc.
Technical parameters
Ramp
Top plate
Auto film attach and cut off system
Packing Height:1800mm,2000mm
Turntable Diameter:1650mm,Height:85mm
Packing efficency 20-40loads/hour
Turntable speed 0-12rpm
Turntable loading(max) 2000kg
Film carriage system Pre-stretch
Up-down frame Heavy duty double-chain carriage lift ,calm and safty
Control system PLC controller
Machine weight 700kg
Machine dimension 2545mm*1650mm*2270mm
Power/voltage 0.75kw,AC220V/0.75kw
Machine Specifications could be met
Control System
PLC control
Photo-eye auto-height sensing pallet height
Separate top ,bottom & up-down Wrap Counter options
Overwrap time is up to create an overwrap
Reinforce wrap times is set to better secure 2 loads placed on top of each other
Film Tension Control adjustment on the panel
Separate start, pause and emergency stop buttons
Power indicator
Manual carriage up/down
Variable Turntable Speed
Carriage up/down speed control
Manual/automatic exchangeable
Turntable
1650mm Diameter Structural steel plate
85mm Height floor to top of turntable
Turntable drive
0-12rpm variable turntable speed by frequency changer
Position turntable alignment
Soft start
Film carriage
Powered pre-stretch system up to 250% to min film consumption
Carriage door opens for effortless roll change and thread film
Film delivery variable speed by separate DC Drive Motor
Electronic film tension control adjustment on panel
Film dancer-bar with variable speed output
Film carriage Drive
Heavy duty double-chain carriage lift, calm and safety
Film carriage variable speed by frequency changer
Main components and electrical performance characteristics of the major components
PLC OMRAN
Inverters(0.4,0.75) OMRAN
Relay OMRAN
Photoelectric switches OMRAN
Proximity Switches OMRAN.
in bubble film or wooden crate or pallet
Fit motorised top plate based on T1650F. This machine is widely suitable for tall and unstable good, top plate provides a press to the top of load and ensure it safety packing.
Technology Data
Wrapping size·+L*W·¼ ·+500~1200·¼f-·+500~1200·¼mm
Packing Height 2000mm
Turntable diameter 1650mm
Turntable Height 85 mm
Turntable weight capacity 2000kg
Turntable speed 0-12rpm
Top pressure 20 kg
Electrics 380V 50HZ
Power 1.5kw
Machine dimensions (mm) 2745(L)f-1650(W)f-3300(H)
Packing efficiency 20-40 loads/hour base on load
Top Plate Device Adopt Pneumatic Direct Transmit Orbit Top Plate
Penumatic Systerm Pressure(mpa) 0.6-1.0
Penumatic Systerm Consumption 1000ml/min
Machine weight 800kg.
in bubble film or wooden crate or pallet
H series ring wrapping machine is a machine designed for packing copper ring and similar materials manufactured in ring with stretch film , wrapping paper packing suface is tidiness & beauty, it is completely moisture dust proof packing and protects the products.
Technology Parameters
ModelH540W
Packing Outside Diameter(mm)300 - 540
Packing Inner Diameter(min)(mm)200
Wrapping Efficiency(pc/sec)20 35 /
Packing Material Width(mm)70 90(Compound Paper Tape)
Electrical RequirementThree Phases 380V/50HZ
Power(kw)1.0
Machine Dimension(L¿¬-W¿¬-H)(mm)1156¿¬-660¿¬-1010
Machine Weight(kg)600.
in bubble film or wooden crate or pallet