Our products range.
Vigortech is the leade rof angle measurement field.
We always supply the advancedand good performance tiltsensors to theconstructionmachinery.
1)static inclinometer--20 types, it has good ability to resist vibration filter and suitable for measuring in static.
2)quasi-dynamic inclinometer--8 types, its suitable for measuring under affection on continuous acceleration.
3)dynamic inclinometer--5 types, its suitable for measuring in dynamic slope.
4)more than 4 types inclinometer can stand 400g impact.
5)more than 3 types inclinometer are suitable for applying to the insideof drill pipe.
Basing on our many years experience, we think the importantpremiseforachievinghighsafety is that can accurately measure the angle by tilt sensor under emergency.
Application
Sensor applications for full safety monitoring of tower crane are embodied in the following areas
1)Tower crane installation. Crane foundation is the basic assembly unit, the practice has proved that major security incidents are due to the problems of crane foundation. Vigor sensors can measure the installation angle, during installation, vigor sensor can real-time detection, send the warning information in time.
2)The height of the tower crane automatically rise. During the automatically rise, after adding new steel frames, the operation room is still perpendicular to the ground or not will have a great impact on the safety.
3)Tower crane vertical lifting process. Measuring the bending angle and tilt angle of the swing arm, the tilt angle of crane.
4)Tower crane horizontal delivering process. Measuring the bending angle and tilt angle of swing arm, the tilt angle of crane.
5)In the heavy windy and rainy weather conditions, measure the swing angle of crane.
Tower crane installation.
The height of the tower cran e automatically rise.
Tower crane vertical lifting process.
Tower crane horizontal delivering process.
In the heavy windy and rainy weather conditions, measure the swing angle of crane.
Application of sensors:
Tilt Beam sensor
- High resolution, accuracy & stability
- High safety remote signal transmission distance>500m
- U-Shaped openings in both ending, easy to connect sensors
- IP65protection
- Alloyed & anodized aluminum housing, corrosion-resistant, wear-resistant, artistic
SST20 low cost tilt sensor
- Low cost, high performance, suitable for batch application
- 50Hz refresh rate, 10Hz response frequency
- 0.07accuracy@-15~50?
-0.2% cross-axis error
- Available to horizontal, vertical, headstand, etc installation methods
- IP67protection
- 9~36VDC power supply
- Sensing elements survive to 1500g shock while operating
SST810 dynamic tilt sensor
- No drift, dynamic tilt measuring
- Lowest cost, high performance
- Built in MEMS tri-axis accelerometer and tri-axis gyroscope
- Dynamic repeatability 0.5
- Highest refresh rate 1000Hz
- X/Y/Z angular rate & acceleration data available
- Autonomous working, do not need any external auxiliary
- Mounted wherever needed
Features
- No drift, dynamic tilt measuring
- Lowest cost, high performance
- Built in MEMS triaxial accelerometer and triaxial gyroscope
- Dynamic accuracy ±0.5°�optional ±1° or ±0.1°
- Highest refresh rate 400Hz
- Autonomous working, do not need any external auxiliary
- Mounted wherever needed
Description
SST810 dynamic inclinometer is specially designed for motion application, which is an inertial product with highest 400Hz update rate.
The traditional inclinometer on the market is designed on accelerometer and electrolyte principles. In dynamic motion such as rapid movement vehicle and vessel, the measurement result will be affected by extra axial acceleration and centripetal acceleration, so that valid angle measurement data can't identify effectively, and accuracy is unable to guarantee. SST810 adopts advanced inertial navigation technology to exactly measure dynamic pitch/roll tilt angle for long time, without aiding of GPS.
Features
- advanced digital design & optical structure
- various analog & digital signal output
- spectrum response: 8-14m
- temperature range:0-500
- accuracy: 1.5 or 1%
- optical resolution: 20:1
- response time: 500ms(95%)
- factory calibration with temperature
- compensation within full range
- wide range of operation temperature
- easy to install & maintain, low cost
Description
Vtir50b thermometer is
Composed of metal housing, optical component and special integrated circuit, which can be used for non-contact temperature measurement in electric power, metallurgy, petrifaction and other industry. Also many accessories are available to select, such as purging cases and 90 adjustable mounting bracket, three-dimensional adjustable mounting bracket, digital display table, etc.) and so on.
Features:
* Built in MEMS tri-axis accelerometer
* Built in MEMS tri-axis gyroscope
* Attitude measurement accuracy0.25
* Refresh rate 200HzMax
Application:
Ship motion measurementWave measurement
Performance parameter:
Range:Rolling90Pitching 90
Rolling90Pitching 90
Protection:IP6
Features
- continuous output or acknowledge output
- adjustable filter to absorb vibration
- available to modify with local gravity value
- mostly compatible to sst30s accessories and options (90 types)
- accuracy up to
- cross-axis sensitivity0.2%f
S
- 9offset repeatability
- refer to about 50 industry & military standards
- military class product available
Applications
Factory automation, precision instrument, vessel, engineering machinery, civil engineering, military project, aerospace.
Sst400 inclinometer is intelligent renewed product, improved functions & performances comprehensively.Sst400 inclinometer strictly tested and combined with simulation & process with advanced eda&cae technologies including materials collection, heat treatment, finite element analysis, modal analysis & test(include housing, sensitive apparatus, pcb board and relationship between characters of each other).
Sst400 inclinometer adopts vigors patented automatic testing technology, not only general test, correct and compensate to temperature drift/non-linearity/cross-axis sensitivity error/orthogonal error/sensitive axis and so on, also made life test with different angular rate & angular acceleration impact and long time temperature cycle test for each product. More test programs, correction and compensation of parameters can be made as special request.
Features
- Continuous output or acknowledge output
- Adjustable filter to absorb vib ation
- Available to modify with local gravity value
- Mostly compatible to SST300's accessories and options (90 types)
- Accuracy up to ±20''
- Cross-axis sensitivity less than ±0.2%FS
- ±9''' offset repeatability
- Refer to about 50 industry & military standards
- Military class product available
Description
- SST400 inclinometer is intelligent renewed product, improved functions & performances comprehensively.
- SST400 inclinometer strictly tested and combined with simulation & process with advanced EDA&CAE technologies including materials collection, heat treatment, finite element analysis, modal analysis & test (include housing, sensitive apparatus, PCB board and relationship between characters of each other).
- SST400 inclinometer adopts Vigor's patented automatic testing technology, not only general test, correct and compensate to temperature drift/non-linearity/cross-axis sensitivity error/orthogonal error/sensitive axis and so on, also made life test with different angular rate & angular acceleration impact and long time temperature cycle test for each product. More test programs, correction and compensation of parameters can be made as special request.
SST100 Tilt Sensor for pipe pusher
Measurement Tunneling process:
1) Measuring attitude of pipe pusher (Recommend Products: SST100SST200)
2) Measuring attitude of shield machine (Recommend Products: SST400SST2203)
3) Measuring attitude of guidance system (Recommend Products: SST400SST2203)
4) Measuring attitude of Heading (Recommend Products: 2D-laser target, 3D-laser target)
Monitoring the construction quality:
1) Monitoring tunnel deformation (Recommend Products: Tilt Beam sensorSST400SST2203)
2) Monitoring tunnel subside (Recommend Products: Tilt Beam sensor)
Monitoring buildings surroundi ng tunnel.
1)Monitoring soil horizontal displacement (Recommend Products: Stationary inclinometerSliding inclinometer)
2)Monitoring buildings tilt (Recommend Products: SST400)
3)Monitoring soil subside (Recommend Products: Tilt Beam sensor)
1Measuring the attitude of Construction Machinery Body.
In the application of pipe jacking tunneling machine, our SST100/200 are widely used to measuring theattitude of pipe jacking machine body, and ithas beensuccessfullybulksupply.
The SST100/200 typical characteristic:
1)Low cost, fast delivery for batch supply.
2)Good durable, strong ability for Anti electromagnetic interference.
3)High measurement accuracy: 0.05
4)Can be normal work in the mud environment for a long time.
2Monitoring the attitude of Guidance System.
In the Guidance System of tunnel construction equipment, our SST400/SST2203 tilt sensors are successfully use in Laser target (2D, 3D) of Guidance System. It better help to achieve more high accuracy guidance control.
The typical characteristic of SST300/400 tilt sensor are:
1)High precision and high stability.
2)Accuracy: 0.0028, OR more high measurement accuracy =0.0005
3)Strongabilitytoresistvibrationandelectromagneticinterference.
4)A built-in type(SST400), 79*35*27mm.
5)A External type(SST2203), IP68 protection.
3Measuring Heading.
During the tunnel construction, measuring the heading attitude is the key factors for driving. 2D/3D Laser target is the optimal measurement equipment.
The typical characteristic as bellow:
1)It is suitable for damp and dark environment of tunnel.
2)The Measurementaccuracy for displacement is 1mm.
3)The Measurementaccuracy for heading is 1mm/m.
4)Its without strict requirements for spot size.
5)The effectivemeasurementarea is 80*100mm.
6)StrongresistancetovibrationandEMI.
7)It can be optionaloutputpitch/rollangledata simultaneously
SST300 inclinometer is excellent tilt device which not only have outstanding performance, but also have simulation & process with advanced EDA&CAE technologies including reliability design, strict process control, structure design, components/materials collection & heat treatment, heat flow analysis, finite element analysis and so on, to achieve high reliability and stability.
Each inclinometer performed with Vigors patented automatic testing technologies without manual operations and unpredictable random errors occupied. Not only general accuracy test, but also temperature drift compensation, nonlinear correction, cross-axis sensitivity error correction, and/or orthogonal error correction, input-axis misalignment compensation, vertical-axis misalignment compensation, as well as life test, made to reduce additional error caused by filed installation, then realize to installed-to-forgot and acquire accurate data.
Sst20 inclinometer based on vigors advanced tilt measurement technology, to meet with low cost, high reliability and volume application, performs high performance-cost ratio.
Sst20 employed most universal & mass-produced components, casting aluminum alloy house, universal high reliability m12-5pin industrial connector; full epoxy seal with ip69k protection, auto-test/calibration equipment which not only ensure delivery speed, also keep the consistency of goods.
Thanks for vigor engineers, they adopt advanced technologies as:
- cae/eda simulation;
- modal test for both housing and pcb to eliminate resonance due to vibration;
- comprehensive performance & function test for component & firmware;
- calibration technology based on sst300 high accuracy inclinometer;
- refer mil/ en/ iso/iec standards to enhance sst20 durability & reliability.
Sst20 support remote diagnosis without disass embling. Mtbf more than 10 years per time. Can work in 10m submersible depth long time and has better emc ability.
Sst20 output rs485/ca
n/canopen and voltage/curre
nt signals. Better power management to meet with automotive /truck/vehicle application without regulated power.
Oem service is available with calibrated pcba or mil qualified.
Sst0513 quasi-dynamic inclinometer:
= 0.32g acceleration within 5s time
Can/canopen & relay output
Set 2 alarm points each axis
Relay life=5 10 6
Range 90 or 360
Resolution 0.01 , accuracy 0.05
Compensated cross-axis and temp. Drift errors
