Features :
* Switching power supply
High efficiency and stability of the new switching power supply so that the signal transmission speed faster and more stable voltage changes, sensitivity stronger, lighter weight.
* Intelligent signal limiter
Each channel has an independent output signal overload distortion, automatic pressure limited function, when the output signals are now clipping distortion can be quickly restored to the output signal compression is not the biggest distortion level and no reduction in the frequency response of audio signals, to avoid DC level because of the audio signal output and burned speakers.
* Multiple detection, multiple protection
A soft start, the second start, the (low) pressure protection, output overload and short circuit protection.
* High efficiency, low fever
Efficient Class H amplifier, significantly reduce heat loss.
* Pristine audio
Metal Packaging, high-power transistors, Yanyi a pure, passionate, authentic audio effects.
* Removable face Network
Removable the hole into the wind-net, easy cleaning.
FP-series Switching Power Amplifier
ITEM: FP-2200 / FP-2400 / FP-2600 / FP-2800
Output Power: 20-20kHz, 1W with 1 khz
8¬+Stereo Power(RMS): 350W f- 2 / 550W f- 2 / 750W f- 2 / 950W f- 2
4¬+Stereo Power(RMS): 500W f- 2 / 800W f- 2 / 1150W f- 2 / 1350W f- 2
8¬+Bridged Power(RMS): 1000W / 1600W / 2100W / 2300W
Frequency Response(+o/-0.3dB,1W/8¬+): 20-20KHz+0.5dB
THD+N: 10KHZ<0.05%
Signal-to-Noise Ratio: 103dB
Slew Rate: 40V/uS
Input Connectors (per channel): Female XLR (pin 2+, configurable for pin 3+). TRS (tip+)
Output Connectors (per channel): 5-way binding posts or Speakon connectors (market dependent)
Class: H
TourClass Protection: ACL,IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input
Voltage Gain(dB): 20
Cooling: 4pcs variable speed DC fans, better than conventional cooling
Controls Front panel: 2 attenuators, power switch; Rear panel: signal ground lift and mode switches
Dimensions (Wf-Hf-D): 483f-88f-480mm
Packing dimension: 610f-590f-170mm
Net weight(kg): 10.2 / 11.6 / 12.5 / 14
Gross weight(kg): 12.7 / 14.1 / 15 / 16.5.
8ohms Stereo Power(RMS): 2X1050W
4ohms Stereo Power(RMS): 2X1600W
Frequency Response(+o/-0.3dB, 1W/8ohms): 20Hz-20kHz, -3dB@135kHz
Power Bandwidth (rated power at 4ohms 1%THD+N): 20Hz-20kHz, -. 1.1dB/+0dB
TourClass Protection: ACL, IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input
THD+N (1kHz 1W ): -60dB
Voltage Gain (rated power @ 8ohms): X40dB
Input Sensitivity (rated power at 8ohms): 0.8V
Input Impedance (balanced/unbalanced): 20Kohms/10Kohms
S/N Ratio ("A"weighted, full power at 4ohms): 96.5dB
Crosstalk ("A"weighted, full power@4ohms): >-65dB
Class: 3 Step H
Input Connectors (per channel): Female XLR (pin 2+, configurable for pin 3+). TRS (tip+)
Output Connectors (per channel): 5-way binding posts or Speakon connectors (market dependent)
Supply Power: 4158W
Power Supply (factory configured): AC220V/230V, 50-60Hz
Cooling: Two side panel variable speed DC fans, better than conventional cooling
Controls: Front panel: 2 attenuators, power switch; Rear panel: Signal ground lift & mode switches.
LED Indicators (per channel): Signal, Protect, Active, Critical
Construction: Steel chassis, 16 gauge. Casting Aluminum front panel.
Dimensions (HXWXD): 132X483X480mm (3U)
Net Weight: 33.5kg
Gross Weight: 34.35kg.
F600 Power Amplifier Key Feature:
* 2/3U high, heavy duty steel chassis
* Modular construction for easy servicing
* Symmetrical layout for even weight distribution
* High efficiency toroidal power transformer
* Oversized, high energy, linear power supply
* 3 steps, Class H Audio topology
* Stereo, parallel or bridged operation
* Twin balanced inputs (Neutrik XLR connectors)
* Dual Speakon and Binding posts outputs
* High quality components used throughout
* Dual, continuously variable speed fans
* Efficient two sides cooling, the efficiency is better than back to front cooling
* Active, signal, protect and critical indicators
* Duraluminium, 8mm thick front-panel
* Unobtrusive carrying handles
* Voltage Gain: 35 or 40 dB .
Specification:
8ohms Stereo Power(RMS): 2X300W
4ohms Stereo Power(RMS): 2X462W
8ohms Bridged Power(RMS): 968W
Frequency Response(+o/-0.3dB, 1W/8ohms: 20Hz-20kHz, -3dB@135kHz
Power Bandwidth(rated power at 4ohms 1%THD+N): 20Hz-20kHz, -. 1.1dB/+0dB
TourClass Protection: ACL, IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input
THD+N (1kHz 1W ): -60dB
Voltage Gain (rated power @ 8Ic): X35dB
Input Sensitivity (rated power at 8Ic): 0.97V
Input Impedance (balanced/unbalanced): 20KIc/10KIc
S/N Ratio ("A"weighted, full power at 4ohms): 99dB
Crosstalk ("A"weighted, full power@4ohms): >-63dB
Class: 3 Step H
Input Connectors (per channel): Female XLR (pin 2+, configurable for pin 3+). TRS (tip+)
Output Connectors (per channel): 5-way binding posts or Speakon connectors (market dependent)
Supply Power: 1320W
Power Supply (factory configured): AC220V/230V, 50-60Hz
Cooling: Two side panel variable speed DC fans, better than conventional cooling
Controls: Front panel: 2 attenuators, power switch; Rear panel: Signal ground lift & mode switches.
LED Indicators (per channel): Signal, Protect, Active, Critical
Construction: Steel chassis, 16 gauge. Casting Aluminum front panel.
Dimensions (HXWXD): 88X483X480mm (2U)
Net Weight: 19.2kg
Gross Weight: 23kg.
Key Feature
1>. Medium and long-throw applications
2>. Ergonmic, fast, secure rigging system
3>. Ultra compact curvilinear array
4>. Trapezoidal design for curved vertical arrays
5>. Excellent speech intellgibility
6>. Highly versatile for both installation and touring.
Application
1>. Band PA Systems
2>. Corporate Events
3>. Ballroom Events
4>. Large Houses of Worship
5>. Convention Centers
6>. Live Music Clubs .
Specification
* Frequency Response (+3 dB): 60 Hz - 19 kHz
* Sensitivity (1w/1m): 101 dB SPL
* Long-term SPL: 128 dB
* Maximum SPL: 134 dB
* Nominal Impedance: 4 ohms
* Power rated: 700 watts
* Peak Power handling: 1400 watts
* Nominal Dispersion: 90H x 60V
* Crossover Frequency: 2.0 kHz
* Dimensions (H x W x D): 805 mm x 476 mm x 500 mm
* Enclosure Material: 18mm polywood
* Surface Finished: black catalyzed polyurethane paint
* Grille: 1.5mm black perforated steel framed
* Net weight: 58 kg
* Low Frequency Driver: 15", 3" voice coil, 190mm magnet
* Mid Frequency Driver: 6.5", 2" voice coil, 140mm magnet
* High Frequency Driver: 1.7"compression driver. polymer diaphragm
* Input Connectors: Neutrik NL4MPX2
Key Feature
1>.2-way full rang Line Array system
2>.500w, with single 2inch HF compression driver horn loaded;2 x 10inch LF cone driver
3>.Supported with a full range of flying accessories
4>.For portable use or permanent inatallation
5>.Pro circuit provides HF driver protection
6>.Distant directivity 72H x 10 V dispersion
7>.Bi-Amplifier or singal-Amplifier .
Application
1>. Medium and small arenas
2>. Ballrooms and clubs
3>. Stadium and pavilions
4>. Theatre live music
5>. Auditoriums and corporate centre .
Specification
* Frequency Response (+3 dB): 55 Hz - 20 kHz
* Sensitivity (1w/1m): 104 dB SPL
* Long-term SPL: 126 dB
* Maximum SPL: 132 dB
* Nominal Impedance: 4 ohms
* Power rated: 500 watts
* Peak Power handling: 1000 watts
* Nominal Dispersion: 72H x 10V
* Crossover Frequency: 1.8 KHz
* Dimensions (H x W x D): 320 mm x 820 mm x 550 mm
* Enclosure Material: 18mm birch polywood
* Surface Finished: black catalyzed polyurethane paint
* Grille: 1.5mm black perforated steel framed
* Net weight: 38 kg
* Low Frequency Driver: 2X10"cone driver
* High Frequency Driver: single 2"compression driver horn-loaded
* Input Connectors: Neutrik NL4MPX4.
