Loose, Single Crystal, Yttrium lron Garnet (YIG)spheres,
Diameter 1.000±0.035 mm,
1780± 25 Gauss,
with 0.3 micro surface finish and annealed
Microwave ferrite YGD CY450G D23 mm X 20mm
Ferrite Toroid for phase shifter
Triangle microwave ferrite(Li series) for X- band frequency, 8.2 to 12. 4 ghz.
Microwave dielectric ceramic: Dielectric constant 50 @4.6GHz
Bar microwave ferrite
Metallized microwave ferrite substrate for antenna use
Metallized YIG Microwave ferrite substrate
Technical requirements:
1- The Ferrite Thickness should be 0.37mm.
In the process of ferrite production, fine grinding method should be used.
The surface of the ferrite should be polished (To reduce the roughness).
Material:CY1780
2- Use a soft gold coating.
Clad layer: Cu1 m 4 m Au2.5 m 5.7 m.
The plating thickness should be 8~10 m(Red area ).
3- The bottom side will be attached to a Gold plated carrier by soldering. The solder paste model can be Pb63Sn37.
The carrier material is Iron. Clad layer: Cu3 6 m Ni1 4 m Au1 2 m.
The final carrier dimensions (after plating) are 12mm X 9mm X 0.5mm.
4- The resistive layer should be 75 Ohm/Sq. The final resistor should be 50 Ohm (+/-10% tolerance) (Green area)
Microwave ferrite(Grade:A50 ) for X-Band high power ferrite phase shifter
Microwave ferrite with special-shaped ceramic dielectric ring
Microwave ferrite for microwave switch
Microwave ferrite substrate:
Size:60*48*1mm;60*48*0.5mm;48*30*1mm;48*30*0.5mm
SATURATION MAGNETISATION (GAUSS):1750-1800
DIELECTRIC CONSTANT:15,0 ±5%
DIELECTRIC LOSS TANGENT: 0.0002
CURIE TEMPERATURE (NOMINAL VALUE)(°C):280
LINE WIDTH (Oe):25
SPIN WAVE LINE WIDTH (Oe):2
FINISH: CLEAN.
Microwave ferrite(A50) for phase shifter
Li Zn - Ti - Mn - (Co)
Lithium - Zinc - Titanium Manganese - (Cobalt)
MS(Gauss) :5000gs ±5%
Tc ( °C) :450
H (Oe) 170 ±20%
Hk (Oe) 3 ±5%
DIELECTRIC CONSTANT 15.3
DIELECTRIC LOSS TANGENT 0.0005
Br (Gauss) 3300
Triangle Microwave ferrite for the isolator(10kw 2.45ghz ) in MPCVD in Artificial diamond industry.
NOTE One isolator needs to be equipped with 24 pieces of triangle microwave ferrite.
Microwave ferrite for isolator
NOTES:
1.MATERIAL: TTVG-1850
2.MATERIAL SHALLBE FREE OF CRACKS AND VOIDS
3.ESL-9912 SILVER OR EQUIVALENT, .0006THK.(ONE SIDE ONLY)
4.MASK BORDER .015 WTH PLATING AROUND EDGESNOT TO EXCEED 5%.
Microwave ferrite with Baked silver.
Disc Microwave ferrite for the isolator(6kw 2.45ghz ) in MPCVD in Artificial diamond industry.
Size D50.82*3.82
Tolerance ±0.02mm
Material CY1000
Price 50USD/PC
Microwave Ferrite Technology, Inc. is the largest manufacturer of microwave ferrite materials in China, producing tens of millions of pieces each year for the wireless industry. The products range from high volume garnets for wireless infrastucture to specialized materials for radar applications.
Our Ferrites & Magnetic Materials include:
Narrow Linewidth
Aluminum & Aluminum Gadolinium Substituted Garnets
Gadolinum Substituted Garnets
Cobalt & Holmium Doped Garnets
Magnesium Spinels
Nickel Spinels
Lithium Spinels
If you have any questions or need further details, feel free to contact us
