Product Description
The Battery powered rail cutting machine has passed the strict verification of protection grade, and supports the work in rainy and snowy weather; Professional lithium battery platform for ultra long endurance operation; The equipment can be used normally under extreme conditions such as high cold and high altitude; The lithium battery has passed the safety test conducted by the national authority.
Specification
Voltage
72V
Power
5KW
Cutting time
Product Description
NQG5.1 Rail Cutting Machine
To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc.
Specification
Model
NQG-5.1
Type
Rail Cutting Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
800*560*500mm
Engine
GX270 petrol engine 5.1KW
Specification of cutting disc
400*32 *4mm
Cutting disc no. of revolutions
3320 r/min
Linear speed of cutting disc
70m/s
Cutting accuracy
Verticality0. 4mm, flatness0.3mm
Cutting time
2 min ( cut off 60kg/m rail)
Weight
50kg
Product Description
NQG-5.8 Abrasive Rail Saw
NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
Specification
Model
NQG-5.8
Type
Rail Cutting Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
850*480*500mm
Engine
Single-cylinder, air-cooling
two-stroke petrol engine
(imported from Sweden K1270R)5.8 kW
Cutting disc form
Double- layer reinforced wire mesh
Linear speed of cutting disc
100 m/s
Rated RPM
4500 r/min
Specification of cutting disc
355x25.4 x3.8mm
Cutting accuracy
Vertical deviation of notch and rail0.30mm
Deviation of bidirectional cutting interfaces0. 35mm
Cutting time
110s( cut off 60kg/m rail)
Fuel tank capacity
1.25 L
Weight
22kg
Product Description
NQG-5.8 Abrasive Rail Saw
NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
Specification
Model
NQG-5.8
Type
Rail Cutting Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
850*480*500mm
Engine
Single-cylinder, air-cooling
two-stroke petrol engine
(imported from Sweden K1270R)5.8 kW
Cutting disc form
Double- layer reinforced wire mesh
Linear speed of cutting disc
100 m/s
Rated RPM
4500 r/min
Specification of cutting disc
355x25.4 x3.8mm
Cutting accuracy
Vertical deviation of notch and rail0.30mm
Deviation of bidirectional cutting interfaces0. 35mm
Cutting time
110s( cut off 60kg/m rail)
Fuel tank capacity
1.25 L
Weight
22kg
Product Description
NQG-5.8 Abrasive Rail Saw
NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
Specification
Model
NQG-5.8
Type
Rail Cutting Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
850*480*500mm
Engine
Single-cylinder, air-cooling
two-stroke petrol engine
(imported from Sweden K1270R)5.8 kW
Cutting disc form
Double- layer reinforced wire mesh
Linear speed of cutting disc
100 m/s
Rated RPM
â?¥4500 r/min
Specification of cutting disc
�?355x�?25.4 x3.8mm
Cutting accuracy
Vertical deviation of notch and railâ?¤0.30mm
Deviation of bidirectional cutting interfacesâ?¤0. 35mm
Cutting time
â?¤110s( cut off 60kg/m rail)
Fuel tank capacity
1.25 L
Weight
22kg
Product Description
NQG-5.8 Abrasive Rail Saw
NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
Specification
Model
NQG-5.8
Type
Rail Cutting Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
850*480*500mm
Engine
Single-cylinder, air-cooling
two-stroke petrol engine
(imported from Sweden K1270R)5.8 kW
Cutting disc form
Double- layer reinforced wire mesh
Linear speed of cutting disc
100 m/s
Rated RPM
4500 r/min
Specification of cutting disc
�?355x�?25.4 x3.8mm
Cutting accuracy
Vertical deviation of notch and railâ?¤0.30mm
Deviation of bidirectional cutting interfacesâ?¤0. 35mm
Cutting time
â?¤110s( cut off 60kg/m rail)
Fuel tank capacity
1.25 L
Weight
22kg
Product Description
NQG5III Rail Cutting Machine
NQG5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m75kg/m . The quality of cutting section meets the requirement of railway industrial standards. Its a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc.
Specification
Model
NQG5III
Type
Rail Cutting Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
670*600*510mm
Internal combustion engine
HONDA GX200
Engine Power
4.8kW
Engine Speed
3600r / min
Thin grinding wheel (spindle)
Spindle speed 3030r / min
Specification (linear velocity)
400 * 32 * 4 (70m /s)
Cutting time
60kg / m rail, 120S
Number of usage
50kg /m rail, use 4 times
60kg /m rail, use 3 times
Machine weight
39.5kg
K1270 Rail Cutting Machine
1. Gasoline engine: two-stroke, air-cooled , single-cylinder
2. Power: 5.9kw
3. Grinding wheel: double reinforced wire mesh
4. Maximum linear velocity: 100m /s
5. Rated R.M.P : 5100 �± 100r / min
6. Grinding wheel size: �? 350 �? 25.4 T 3.8 / 4.2mm
7. Cutting accuracy: a. Vertical deviation between incision and longitudinal direction of the rail: 0.40mm b. Plane deviation between bidirectional cutting interface: 0.35mm
8. Cutting depth: 125mm
9. Cutting time: 120s ( for 60kg/m rail)
10. Machine weight: 28kg
11. Fuel tank capacity: 1.25L
12. Overall size: 850 480 500mm
Product Description
NGM-6.0 Rail Profile Grinder
This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding.
Specification
Model
NGM-6.0
Type
Rail Profile Grinder
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1410*500*850mm
Engine
2 stroke petrol engine M165
Power
6.0kW
Grinding stone speed
3900r/min
Grinding stone inclination
0~90°
Grinding stone feeding stroke
42mm
Grinding stone specification
150x55x70mm
Fuel tank volume
4.5L
Profile wheel span
1000mm
Feed adjustment accuracy
0.125mm
Weight
60kg
Product Description
NGM-4.8I Digital Display Rail Grinding Machine
NGM-4.8I digital display rail grinding machine is suitable for grinding 43kg/m-75kg/m rail weld, uneven joint, rail side fat edge, rail surface welding repair and other parts. With a multi-purpose, automation and intelligent set as one of the high-precision rail grinding machine.
Specification
Model
NGM-4.8I
Type
Rail Grinding Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1500 * 450 * 750 mm
Internal combustion engine
GX200, > 3600r/min, 4.8kW
Grinding Wheel Specification
125*65*M20
Grinding Wheel Linear Velocity
> 35m/s
Spindle rotation
4500r/min
Inclination angle of grinding wheel
+90 degrees
Accuracy of inclination angle
0.5 degree, 1.0 degree, 2.0 degree, 3.0 degree, 4.0 degree, 5.0 degree
Grinding wheel stroke
45 mm
Grinding wheel feed accuracy
0.05 mm, 0.1 mm, 0.15 mm, 0.2 mm, 0.25 mm, 0.3 mm
Profile wheelbase
1000mm
Weight
90kg
Product Description
NGM-5.1 Rail Profile Grinding Machine
This machine is mainly used for forming and grinding operations of railway rail welding joints and rail surface repairs. The
development and application of the CNC feed unit realizes the intelligent control of the grinding wheel feed. Significantly
improve the profiling accuracy and polishing efficiency.
BENIFITS
Angle of the grinding head is set using an adjustment wheel, lowering/raising of the grinding stone is electrically contlled Equipped with spark protection device Equipped with electric control system prevents over grinding by limiting the lowering of the grinding stone Grinds the whole head of rail in one single operator, no need to turn the machine or to handle it
Specification
Model
NGM-5.1
Type
Rail Profile Grinding Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1500 * 450 * 750 mm
Engine
HONDA GX270
Power
5.1 kW
Grinding wheel specifications
125x65 mm
Feeding accuracy
0.1 mm
Turning angle of grinding stone
±90°
Spindle revolution
4100r/min
Grinding stone feeding stroke
42 mm
Profile wheel span
1000 mm
Weight
100 kg
Weight of supporting rod
14 kg
Product Description
Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations
Specification
Model
NGM-4.4II
Type
Rail Profile Grinding Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1480*470*810mm
Engine
Two-stroke petrol engine/4.4KW
Main shaft rpm
4670r/min
Bolt screwing flat grinding wheel
125*65*M20
Grinding head angle of inclination
90°
Grinding head stroke
45 mm
Total weight
61kg
Product Description
Electric Rail Grinding Machine
The design of FMG-2.2 electric rail profile grinder allows you accurate and stable profile grinding up to 90°about the rail head by rotation of the machine using its turming device and its inclinable operating arm. According to customer needs, 380V three-phase motor can be selected as power or 220V single-phase power as power. With good visibility of the grinding area assures you of a high quality finish.
Specification
Model
FMG-2.2
Type
Electric Rail Grinding Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1200*420*900mm
Engine
2.2kW, 380V or 220V electric motor
Grinding stone speed
2860 r/min
Grinding stone specification
150*55*70mm
Grinding stone feeding stroke
50mm
Turning angle of grinding stone
90°
Weight
80KG
Product Description
72V Intelligent Lithium Battery Profiling Grinding Machine
*The depth of the feed, the real-time battery power digital display, the operator is clear at a glance
*Dual control system, both electronic feed and mechanical operation feed
*Electronic feed, the feed precision is adjustable, realize the dual purpose of primary grinding and precise grinding
*Preset the warning feed depth for grinding to prevent excessive grinding and cause grinding accidents
*Super endurance capability, can work continuously for 1 hour *The whole machine is waterproof and can be used below minus 30
Product Description
NGYM-I Rail Waist Grinding Machine
Rail waist grinding machine is suitable for grinding works before railway laying, subway maintenance welding and gluing insulated joints construction. This work is one of the heavy workload jobs in the rail welding operation. In the past, it was mainly carried out by hand-held electric grinder or angle grinder, it has led to high labor intensity, low operation efficiency and slow working speed, poor grinding surface quality, serious environmental pollution etc. The rail waist grinding machine is suitable for 50kg/m-75kg/mrails.
Specification
Model
NGYM-I
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1120*430 *780mm
Engine
petrol engine
Max output power
4.0kw/3600rpm
Grinding wheel spindle speed
3600rpm
Grinding wheel diameter
�¦ 100-230mm
Grinding wheel size
2-124*106*34.5/18 G-A20 P 7B-45m/s
Machine weight
57kg
Product Description
NGM-6.3 Digital Control Profiling Rail Grinder
NGM-6.3 Digital control profiling rail grinder , with petrol engine . Mainly used for the restoration and grinding of welded joints, calendering burrs, rail surface repair, waveform wear, etc. in the maintenance and construction of railway rails.
BENIFITS
1.Gasoline driven, strong adaptability to an open working environment.
2.The feeding of the grinding controlled by the electric, high polishing precision.
3.Following copying, easy operation.
Specification
Supporting power imported GX270 gasoline engine (6.3kW / 3600rpm)
MCU running speed 16 MIPS
LCD display resolution 128 64 DOTS
Timer real-time display resolution hour, minute and second
Timer cumulative display resolution hours
Timer output resolution year, month, day, hour, minute
Magneto output voltage ~ 12V
External charging power supply ~ 220 V
Grinding wheel stroke 59 mm
Profiling track 1010 mm
Deflection angle of profiling �± 90 �°
Grinding wheel inching feed accuracy 0.01 ~ 0.5 mm (real-time setting)
Working environment temperature - 20 ~ + 70
Overall dimension of main engine (length* wide* Height) 1565 550 973 (mm)
Weight 99 kg
The GBM-7.6 rail wave abrasion grinding machine is a professional machine used for the wave abrasion and grinding of the rail top. This machine is suitable for various rails of 43~75kg/m
Engine power Honda GXV390, 7.6kW, single cylinder, air-cooled 4-stroke petrol engine
Grinding wheel speed 3600r/min
Feed accuracy 0.11mm
Grinding wheel stroke 45mm
Grinding wheel size: 150 55 70mm
Profile wheel span 1000mm
Dimensions 1700 460 800mm
Weight 85kg
Product Description
NLB-300 Rail Impact Wrench with One Socket
NLB-300 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. High power petrol engine ensure large torque and high working efficiency.
Specification
Model
NLB-300
Type
Rail Impact Wrench
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1300*510*760mm
Main shaft rpm
780r/min
Max. loosen torque
300 Nm
Max. fasten torque
150 Nm
Working efficiency
10 pieces/min
Petrol engine
1) Model: GX160
(2) Rated power: 4Kw
(3) RPM: 3600r/min
Weight
60kg
Product Description
Lithium Battery Rail Impact Wrench
Vertical double lithium electric torque wrench (model: U-LD81901) is a railway digital display torque wrench with vertical operation and double lithium electric protection technology, and its working torque is>3000N m. The torque value is adjustable and controllable, which is specially used for various railway bolt operations. The vertical double lithium electric torque wrench (model:LJ - LDB1901) is composed of a control lever, a motor, and a reducer. It adopts the unique ergonomic flat impact principle, which makes the machine more safe, labor-saving, and efficient. Its unique overall waterproof design ensures the all-weather construction needs. Torque regulation and compensation can make torque control more accurate to meet construction requirements.
Specification
Model
LJ-LD81901
Type
Battery Impact Wrench
Material
Stainless Steel
Dimensions (L x W x H) (mm)
600*400*250mm
Rated voltage
(DCV) 18-36
Max. torque
3000 N.m
Motor speed (RPM)
0-3000 optional
Impact frequency (BPM)
0-5000 optional
Battery pack capacity
(ah) 18-36
Operating temperature range
(-40 ~ 50 )
Torque control
adjustable and controllable
Product Description
NLB-500 Portable Rail Impact Wrench
NLB-500 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. With two stroke petrol engine and 18kg lightweight can achieve easily vertical and horizontal wrenching tasks.
Specification
Model
NLB-500
Type
Rail Impact Wrench
Material
Stainless Steel
Dimensions (L x W x H) (mm)
830*280*380 mm
Engine
2 stroke, Single cylinder, Air cooling
RPM
7500r/min
Power
1.42kw
Spindle RPM
800r/min
Rated torque
500N.m
Peak torque
1000N.m
Weight
18kg
Product Description
Lithium Battery Powered Rail Bolt Wrench
Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations
Specification
Model
LJ-LDB1701X
Type
Lithium Battery Torque Wrench
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1100*700*450mm
Type
Battery powered rail bolt wrench
Rated voltage
(DCV) 24-48
Max. torque
3000 N.m
Motor speed (RPM)
0-3000 optional
Impact frequency (BPM)
0-5000 optional
Battery pack capacity
(ah) 24-48
Operating temperature range
(-40 ~ 50 â??)
Operating range
m6-m30
Torque control
adjustable and controllable
Weight
22kg
