AAC conductor is also known as aluminium stranded conductor. It is manufactured from electrolytically refined aluminium, with a minimum purity of 99.7%. AAC is used mainly in urban areas where the spacing is short and the supports are close. All aluminium conductors are made up of one or more strands of aluminium wire depending on the end usage. AAC is also used extensively in coastal regions because it has a high degree of corrosion resistance
AACSR is a concentrically stranded conductor composed of one or more layers of Aluminium -Magnesium -Silicon Alloy wire stranded around a high strength coated steel core. The core can be of either single wire or stranded multi wire. AACSR is available with steel core of Class A, B or C galvanizing or Aluminium clad (AW). Additional corrosion protection is available through the application of grease to the core or infusion of the complete cable with grease.
CCS cable is composed of copper clad steel. Solid or Concentric-lay-stranded conductors of copper-clad steel wires. A high strength steel wire with a 25% thick cross-section ratio of Copper cladding creating a high electrical conductivity, highly corrosive resistant and a thermal stability for high temperature operation and all with a lighter weight.
Concentrically stranded Galvanized steel wire strand available in class "A", "B" and "C" galvanizing, "A" being the least heavy and "C" being the most heavy. Manufactured without welds per ASTM A-363 or with welds per ASTM A-475. Strands are formed to remain substantially in place when severed.
Zinc-coated grade of steel strand wire /guy wire : Class A ,Class B and class C.
For use in electrical grounding systems and on insulators for overhead transmission and distribution applications. Stranded conductors offer greater flexibility than solid.
1. Central Tube OPGW Single/Double Armourlayers The central stainless steel tube is surrounded by single or double layers of aluminium clad steel wires(ACS) or mix ACS wires and aluminium alloy wires.
2. OPGW With Stranded Layers, Single Tube And Multitube Double /ThreeArmour Layers The stainless steel tube is stranded by double or three layers of aluminium clad steel wires(ACS)or mix ACSwires and aluminium alloy wires.
3. Central Al-covered stainless steel tube OPGW Single/Double ArmourLayers The central Al-covered steel tube is surrounded by single or double layers of aluminium clad steel wires(ACS) or mix ACS wires and aluminium alloy wires.
4. Aluminium tube OPGW Single/Double Armour Layers The Aluminium tube is surrounded by single or double layers of aluminium clad steel wires(ACS)or mix ACSwires and aluminium alloy wires
5. Central Type Aluminum Tube OPGW Single/Double ArmourLayers TheCentral TypeAluminum Tube is surrounded by single or double layers ofaluminium clad steel wires(ACS)or mix ACSwires and aluminium alloy wires.
Phase Conductor: Concentric strand or compressed 1350-H19 conductor Neutral
Conductors: aluminum alloy 1350-H19,6201-T81, or ACSR conductors
Insulation: high density polyethylene (HDPE) or cross-linked polyethylene (XLPE).
Conductor: Class 2 Circular compacted stranded Aluminium
Conductor Screen: Extruded semi-conductive layer
Insulation: XLPE (Cross-linked polyethylene)
Insulation Screen: Extruded semi-conductive
layer Separator: Semi-conductive tape
Outer Sheath: HDPE (High Density polyethylene)
0.6/1 kV Single-core cables, PVC insulated, unarmoured with copper conductor
These cables are intended for fixed installations, indoors and outdoors, in low voltage electricity systems. They are normally used forthe distribution of electrical energy in urban networks, power or switching stations, industrial plants, as well as in switchgears, in applications where there is a risk of mechanical damage.
0.6/1 kV Single-core cables, PVC insulated, unarmoured with aluminum conductor
These cables are intended for fixed installations, indoors and outdoors, in low voltage electricity systems. They are normally used forthe distribution of electrical energy in urban networks, power or switching stations, industrial plants, as well as in switchgears, in applications where there is a risk of mechanical damage.
0.6/1 kV Multi-core cables, PVC insulated, unarmoured with copper conductor
These cables are intended for fixed installations, indoors and outdoors, in low voltage electricity systems. They are normally used for the distribution of electrical energy in urban networks, power or switching stations, industrial plants, as well as in switchgears, in applications where there is no risk of mechanical damage
0.6/1 kV Multi-core cables, PVC insulated, unarmoured with aluminum conductor
0.6/1 kV Single-core cables, PVC insulated, wire armoured with copper conductor
CU/PVC/AWA/PVC (Stranded Copper Conductors/PVC Insulated/ Aluminium Wire Armoured/ PVC Sheathed)
0.6/1 kV Single-core cables, PVC insulated, wire armoured with aluminum conductor
AL/PVC/AWA/PVC (Stranded Aluminum Conductors/PVC Insulated/ Aluminium Wire Armoured/ PVC Sheathed)
0.6/1 kV Multi-core cables, PVC insulated, tape armoured with copper conductor
CU/PVC/STA/PVC (Stranded Copper Conductors/PVC Insulated/Steel tape Armoured/ PVC Sheathed)
0.6/1 kV Multi-core cables, PVC insulated, tape armoured with aluminum conductor
AL/PVC/STA/PVC (Stranded Aluminum Conductors/PVC Insulated/Steel tape Armoured/ PVC Sheathed)
0.6/1 kV Multi-core cables, PVC insulated, unarmoured with copper conductor
0.6/1 kV Multi-core cables, XLPE insulated, wire armoured with aluminum conductor
Construction :
AL/XLPE/SWA/PVC (Stranded Aluminum Conductors/XLPE Insulated/Steel Wire armoured/PVC Sheathed)
1.Solid or stranded copper/aluminum conductor
2.Insulation with XLPE, PE, or PVC
3.For cables of two-phase or three-phase conductors, round or flat shape available
4.PVC inner COVERING
5.Concentric layer of helically layed copper/aluminum wires
6.Wrapping tape
7.Black XLPE, PE, or PVC jacket
The phase conductor is concentrically stranded, compressed soft copper or 1350-H16/26 aluminum alloy
Cable is composed of the conductor with moisture block in the strands, covered by a semi-conducting cross-linked polyethylene strand shield, a tree-retardant cross-linked polyethylene primary insulation, and a semi-conducting cross-linked polyethylene insulation shield
Conductors are available with either 100% or 133% insulation levels
Concentric neutral of bare copper wires and an insulating polyethylene jacket is applied over the insulation shield
Cable identified by surface print on the jacket and with the lightning bolt symbol for supply cables indented in the jacket
Conductor Class 5 flexible copper conductor
Insulation PVC (Polyvinyl Chloride)
Sheath PVC (Polyvinyl Chloride) Sheath
Colour Blue Grey Green/Yellow Special colours to order
Conductor Plain annealed stranded copper conductor class 2 as per BS EN 60228. Insulation Extruded layer of Polyvinyl chloride (PVC) insulation with temperature rating 70 C at normal operation as per BS EN 50363-3 type TI1
[1] CONDUCTOR Electrolytic copper, class 5 according to EN 60228.
[2] INSULATION PVC.
[3] SHEATH Flexible PVC, black or white colors.
Conductor Class 5 flexible copper conductor
Insulation PVC (Polyvinyl Chloride)
Insulation Colour Red Black Blue Orange Yellow White Green/Yellow Grey Brown Violet Pink
H05V-R/H07V-R is suitable for power and lighting circuits and building wiring. The cable is intended for use in semi-flush exposed conduits and embedded conduits as well as in closed installation ducts, and is ideal for the internal wiring of appliances.
For fixed installations in devices and in or on lights, as well as for the house installation, especially for uses by their one low creation is demanded of smoke and corrosive gases in the fire case, however not outside.
Conductor Class 2 stranded copper conductor)
Insulation LSZH (Low Smoke Zero Halogen)
Insulation Colour Red Black Blue Yellow Orange White Green/Yellow Grey Brown Violet Pink
H05V-R/H07V-R is suitable for power and lighting circuits and building wiring. The cable is intended for use in semi-flush exposed conduits and embedded conduits as well as in closed installation ducts, and is ideal for the internal wiring of appliances.
conductor:copper,aluminum,alloy aluminum,copper clad aluminum
Jacket:rubber,pvc,epdm,neoprene rubber
insulation:rubber,pvc,cpe
color:black,red,orange or as your requirement
Voltage:450-750V
Cross section:10mm2-185mm2
Temperature rating:-30 to 90 for rubber welding cable,-45 to 105 for neoprene rubber welding cable/pvc battery cable
-Conductors:Annealed Copper Wire
-Insulation : PVC/XLPE
-Shielding : copper wire braid or other suitable shielding
-Sheath : PVC/LSZH
-Filler: Suitable filler
-Armored: steel wire armor/steel tape armor or other suitable armor
-The special type of fire-retardant, flame-resisting, low-halogen, low-fume and non-halogen as well as acid and alkali proof for these cables can be supplied upon request.
Conductor : Fine Wire Tinned Copper Conductor according to BS EN 60228:2005 cl. 5.
Insulation : UV resistant, cross linkable, halogen free, flame retardant compound for core insulation.
Core Identification : Red, black or natural
Sheath : UV resistant, cross linkable, halogen free, flame retardant compound for Sheath over insulation.
Cable Colour : Black
