Product performance:
This product has the advantages of high conversion rate, stable crystal form, low impurity content, significant true ratio, and reduced ignition. Its product has low longitudinal and transverse shrinkage, excellent electrical insulation performance, wear resistance, corrosion resistance, and high temperature resistance.
Aluminum Hydroxide is a white powder which can be used as flame retardant and filler.
While it is used for resin Solid Surface,It has characteristic of white crystalline powder, non-toxic, tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle size distribution, low impurity content, good stability, high whiteness, uniform particle size and good dispersibility.
While it is used for composite materials,it has characteristic of micro powder,high white powder without secondary pollution,smoke elimination, filling, antistatic.The initial decomposition temperature of aluminum hydroxide is about 205 �ºC. Aluminum hydroxide flame retardant can release a large amount of water vapor when heated. A large amount of water vapor can store heat and dilute the concentration of polymer combustible gas. It can also form a non combustible barrier between the combustion source and the matrix material to achieve the purpose of flame retardant. At the same time, it is also a smoke suppressant, because the gas it releases is water vapor, which has no corrosion to metals.
It is produced by reed as raw material and produced by low pollution technology,sodium lignosulfonate is with good solubility, high surface activity and dispersing ability.It is a sulfonate derivative contents benzoic acid and carboxyl.It's adhesion, dispersion and chelation are widely used in various industries to improve its physical and chemical properties, save costs and improve efficiency.
Mainly export for Concrete:
Polycarboxylate superplasticizer is a new type of water reducing agent. The water reduction rate is generally around 20%, but it has high requirements for cement and sand of concrete.If the mud content in the sand is slightly larger, the polycarboxylate superplasticizer has a water reduction rate of 0.However, the technical team found that when using polycarboxylate superplasticizer's dosage is 6% of weight with sodium lignosulfonate's dosage 4%-6%,the water reduction rate will reach the most ideal water reducing ratio and the cost of concrete admixture is also the most economical.Because of the characteristics of calcium and magnesium ions in Sodium lignosulfonate, it is easy to occur precipitation and discoloration when mixed with polycarboxylate superplasticizer.
Polycarboxylate Superplasticzier we produce types as below:
High water reducing standard type
(normally they can be satisfied and used alone for concretes' requirements)
JH03 basic standard type under most exported
JH09 viscosity adjustment type,
water reducing ratio is higher than JH03 suitable for high clay content ratio of cement,under most exported
JH15 high technology Carbox-6 type,water reducing ratio and performance are better than JH03 and JH09 suitable for high strength concrete,
New Research
Slow Release High Slump retention type
(if concretes' slump retention is not satisfied)
JH02 High slump retention type under most exported less than JH06
JH06 high slump retention type,
mixing with JH03 and JH09 if concrete's slump retention is not satisfied under most exported
1.Every type of PCE has 40% 50% solid content.
2.When mix water reducing type PCE with slump retention type,the suggested mixing ratio is 8:2 or 7:3 or 6:4 by weight according to lab trial test.
3.Mainly export JH06 and JH09.
High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3
Basic Information:
It is a high range water reducer, high concentration naphthalene-based superplasticizer, also named Naphthalene Sulfonate Formaldehyde Condensate SNF, PNS and FDN etc. Na2SO4 has 3 grades:5% 10% 18% for exporting markets,in domestic we also have 3% 23% Na2SO4 content FDN.It contains no chloride, non-corrosive to steel bars, non-poisonous, odorless, and non-flammable.
1. Application Method and Notice
1,Blend dosage range is 0.5-1.2%. Appropriate blend dosage can be selected according to project object and the materials used during application.
2,FDN powder is recommended to be applied in solution. It can be used in dry form, but make sure mix it thoroughly with concrete.
3,If this product is applied with adoption of stagnant water blending method or post-blend approach, water reduction and dispersion will be better.
4,This product can be formulated with concrete additives of other varieties. It can be "double blended" with blending materials such as fly ash, ground slag, etc. But the blend dosage shall be calculated based on the total of cementing materials.
5,When this product is used for the first time or cement variety is changed, concrete trial preparation shall be conducted according to the adopted materials and construction requirements in the field. Construction mixing rate shall be adjusted based on testing result to serve as instruction for construction blending.
1.Suitable for long-distance construction projects type pumping concrete.
2.Suitable for compounding normal concrete,high-performance concrete,high-strength concrete and ultra-high strength concrete.
3.Suitable for impervious,antifreezed and high durability concrete.
4.Suitable for high-performance and high flowing concrete,self-leveling concrete,fair-faced concrete and SCC(self compact concrete).
5.Suitable for high dosage of mineral powder type concrete.
6.Suitable for mass concrete that used in expressway, railway, bridge, tunnel, water conservancy projects, ports, wharf, underground etc.
Aluminum Hydroxide is a white powder which can be used as flame retardant and filler.
While it is used for resin Solid Surface,It has characteristic of white crystalline powder, non-toxic, tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle size distribution, low impurity content, good stability, high whiteness, uniform particle size and good dispersibility.
While it is used for composite materials,it has characteristic of micro powder,high white powder without secondary pollution,smoke elimination, filling, antistatic.The initial decomposition temperature of aluminum hydroxide is about 205 �ºC. Aluminum hydroxide flame retardant can release a large amount of water vapor when heated. A large amount of water vapor can store heat and dilute the concentration of polymer combustible gas. It can also form a non combustible barrier between the combustion source and the matrix material to achieve the purpose of flame retardant. At the same time, it is also a smoke suppressant, because the gas it releases is water vapor, which has no corrosion to metals.
Aluminum Hydroxide is a white powder which can be used as flame retardant and filler.
While it is used for resin Solid Surface,It has characteristic of white crystalline powder, non-toxic, tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle size distribution, low impurity content, good stability, high whiteness, uniform particle size and good dispersibility.
While it is used for composite materials,it has characteristic of micro powder,high white powder without secondary pollution,smoke elimination, filling, antistatic.The initial decomposition temperature of aluminum hydroxide is about 205 �ºC. Aluminum hydroxide flame retardant can release a large amount of water vapor when heated. A large amount of water vapor can store heat and dilute the concentration of polymer combustible gas. It can also form a non combustible barrier between the combustion source and the matrix material to achieve the purpose of flame retardant. At the same time, it is also a smoke suppressant, because the gas it releases is water vapor, which has no corrosion to metals.
PCE Polycarboxylate superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete.
With initiating systerm and reaction conditions,we achieve high adaptability.Comparing with PNS and other superplasticizer, PCE has many characteristic advantages in technology and performance as following:
(1) low dosage, high rate of water reducing;
(2) keep concrete good slumption retention;
(3) good compatibility with cement;
(4) small shrinkage of concrete to keep the stability of volume and durability;
(5) environmental in production and usage. Base on above advantages.
Our company's main products:
Polycarboxylate superplasticizer since 2003,
Naphthalene superplasticizer since 1993,
Sodium lignosulfonate and calcium lignosulfonate since 1993,
Disperser/diffusion agent NNO,
Sodium gluconate retarder.
Sodium gluconate ( C6H11NaO7 ) ,also known as sodium pentahydroxy organic acid, is a white crystalline granule or powder with a relative molecular mass of 218.14, a melting point of about 206 C, PH of 6.2 to 7.8, very soluble in water, slightly soluble in ethanol, insoluble in ether. Non-toxic, with good thermal stability, no deliquescence.
As a retarder for cement: adding a certain amount of sodium gluconate to cement can increase the plasticity and strength of concrete, and its retardation will delay the initial and final solidification time of concrete.
Delivery:
1.Qingdao Port is the best choice for us , but we can also choose Tianjin Port or other ports to meet customers' needs.
2.We have a professional logistics center to ensure the safety and convenience of cargo transportation.
3.A 20ft container can carry 24 to 26 tons without pallets.
4.The delivery date is generally 3~7 days after the payment.
Sodium gluconate ( C6H11NaO7 ) ,also known as sodium pentahydroxy organic acid, is a white crystalline granule or powder with a relative molecular mass of 218.14, a melting point of about 206 C, PH of 6.2 to 7.8, very soluble in water, slightly soluble in ethanol, insoluble in ether. Non-toxic, with good thermal stability, no deliquescence.
As a retarder for cement: adding a certain amount of sodium gluconate to cement can increase the plasticity and strength of concrete, and its retardation will delay the initial and final solidification time of concrete.
Delivery:
1.Qingdao Port is the best choice for us , but we can also choose Tianjin Port or other ports to meet customers' needs.
2.We have a professional logistics center to ensure the safety and convenience of cargo transportation.
3.A 20ft container can carry 24 to 26 tons without pallets.
4.The delivery date is generally 3~7 days after the payment.
Aluminum Hydroxide is a white powder which can be used as flame retardant and filler.While it is used for resin Solid Surface,It has characteristic of white crystalline powder, non-toxic, tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle size distribution, low impurity content, good stability, high whiteness, uniform particle size and good dispersibility.
While it is used for composite materials,it has characteristic of micro powder,high white powder without secondary pollution,smoke elimination, filling, antistatic.The initial decomposition temperature of aluminum hydroxide is about 205 �ºC. Aluminum hydroxide flame retardant can release a large amount of water vapor when heated. A large amount of water vapor can store heat and dilute the concentration of polymer combustible gas. It can also form a non combustible barrier between the combustion source and the matrix material to achieve the purpose of flame retardant. At the same time, it is also a smoke suppressant, because the gas it releases is water vapor, which has no corrosion to metals.
High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3
Naphthalene superplasticizer
Chemical name:
�² Sodium naphthyl sulfonate formaldehyde condensate.
Molecular formula:
(c10h6ch2naso3) n, n is mainly 9-12.
Joyreach Fdn Powder Naphthalene Water Reducing Admixture Superplasticizer for Concrete Package 25kg/50kg
Naphthalene superplasticizer has good adaptability to various cements and improves the operability of concrete.FDN has the advantage of high water reducing ratio, non-delayed coagulation, non-air entraining and strong adaptability. It can improve the workability of concrete to a large extent so as to reduce the water consumption for blending. Meanwhile, it can improve the strength of concrete.
It is widely used in concrete engineering: highway, railway, bridge, tunnel, power station, dam, high-rise building and other projects.It has good dispersion, water reduction and early-strength effect.Adding naphthalene series superplasticizer into ordinary concrete can improve the physical and chemical properties of concrete, improve the concrete strength, construction speed, project quality, technology and working conditions.
1. early strength admixture - improve construction progress;
2. retarding admixture - prevent cracking of large infrastructure such as airports and bridges;
3. pumping type admixture - transported by pump, such as high-rise buildings;
4. antifreeze admixture - used for winter construction.
FDN-A High concentration product with sodium sulfate content no more than 5 percent.
FDN-AI Middle concentration product with sodium sulfate content no more than 10 percent.
FDN-AII Low concentration product with sodium sulfate content no more than 18 percent.
FDN-23 sodium sulfate content no more than 23 percent,cheapest type to save cost.
Usage method:
--Powder 0.5%-1.0%, recommended dosage 0.75%;
--Liquid is 1.0%-2.0%, and the recommended mixing amount is 1.5%. The mixing amount can be appropriately increased according to the grade of concrete.
--Each batch of goods must be tested to meet the engineering requirements before use.
1. As the requirement of engineer,the dosage can be adjusted after testing.
2. It can be put into blender with mixing water,making mixing before concrete pouring,the plasticizing effect could be better.
High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3
Naphthalene superplasticizer
Chemical name:
�² Sodium naphthyl sulfonate formaldehyde condensate.
Molecular formula:
(c10h6ch2naso3) n, n is mainly 9-12.
Joyreach Fdn Powder Naphthalene Water Reducing Admixture Superplasticizer for Concrete Package 25kg/50kg
Naphthalene superplasticizer has good adaptability to various cements and improves the operability of concrete.FDN has the advantage of high water reducing ratio, non-delayed coagulation, non-air entraining and strong adaptability. It can improve the workability of concrete to a large extent so as to reduce the water consumption for blending. Meanwhile, it can improve the strength of concrete.
It is widely used in concrete engineering: highway, railway, bridge, tunnel, power station, dam, high-rise building and other projects.It has good dispersion, water reduction and early-strength effect.Adding naphthalene series superplasticizer into ordinary concrete can improve the physical and chemical properties of concrete, improve the concrete strength, construction speed, project quality, technology and working conditions.
1. early strength admixture - improve construction progress;
2. retarding admixture - prevent cracking of large infrastructure such as airports and bridges;
3. pumping type admixture - transported by pump, such as high-rise buildings;
4. antifreeze admixture - used for winter construction.
FDN-A High concentration product with sodium sulfate content no more than 5 percent.
FDN-AI Middle concentration product with sodium sulfate content no more than 10 percent.
FDN-AII Low concentration product with sodium sulfate content no more than 18 percent.
FDN-23 sodium sulfate content no more than 23 percent,cheapest type to save cost.
Usage method:
--Powder 0.5%-1.0%, recommended dosage 0.75%;
--Liquid is 1.0%-2.0%, and the recommended mixing amount is 1.5%. The mixing amount can be appropriately increased according to the grade of concrete.
--Each batch of goods must be tested to meet the engineering requirements before use.
1. As the requirement of engineer,the dosage can be adjusted after testing.
2. It can be put into blender with mixing water,making mixing before concrete pouring,the plasticizing effect could be better.
High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3
Naphthalene superplasticizer
Chemical name:
�² Sodium naphthyl sulfonate formaldehyde condensate.
Molecular formula:
(c10h6ch2naso3) n, n is mainly 9-12.
Joyreach Fdn Powder Naphthalene Water Reducing Admixture Superplasticizer for Concrete Package 25kg/50kg
Naphthalene superplasticizer has good adaptability to various cements and improves the operability of concrete.FDN has the advantage of high water reducing ratio, non-delayed coagulation, non-air entraining and strong adaptability. It can improve the workability of concrete to a large extent so as to reduce the water consumption for blending. Meanwhile, it can improve the strength of concrete.
It is widely used in concrete engineering: highway, railway, bridge, tunnel, power station, dam, high-rise building and other projects.It has good dispersion, water reduction and early-strength effect.Adding naphthalene series superplasticizer into ordinary concrete can improve the physical and chemical properties of concrete, improve the concrete strength, construction speed, project quality, technology and working conditions.
1. early strength admixture - improve construction progress;
2. retarding admixture - prevent cracking of large infrastructure such as airports and bridges;
3. pumping type admixture - transported by pump, such as high-rise buildings;
4. antifreeze admixture - used for winter construction.
FDN-A High concentration product with sodium sulfate content no more than 5 percent.
FDN-AI Middle concentration product with sodium sulfate content no more than 10 percent.
FDN-AII Low concentration product with sodium sulfate content no more than 18 percent.
FDN-23 sodium sulfate content no more than 23 percent,cheapest type to save cost.
Usage method:
--Powder 0.5%-1.0%, recommended dosage 0.75%;
--Liquid is 1.0%-2.0%, and the recommended mixing amount is 1.5%. The mixing amount can be appropriately increased according to the grade of concrete.
--Each batch of goods must be tested to meet the engineering requirements before use.
1. As the requirement of engineer,the dosage can be adjusted after testing.
2. It can be put into blender with mixing water,making mixing before concrete pouring,the plasticizing effect could be better.
Product performance:
This product has the advantages of high conversion rate, stable crystal form, low impurity content, significant true ratio, and reduced ignition. Its product has low longitudinal and transverse shrinkage, excellent electrical insulation performance, wear resistance, corrosion resistance, and high temperature resistance.
Product Usage:
The product is widely used in various abrasive tools, wear-resistant fillers, and for preparing various ceramic grade and refractory grade micro powders. It is used as a raw material for high aluminum, high-purity structural ceramics, electronic components, high-frequency insulation ceramics, and high aluminum ceramic balls.
Product quality:
The product quality is stable, and it is a domestic high-temperature alumina manufacturer with an annual production capacity of 120000 tons.
