GUM ARABIC
Overview. Gum Arabic is the gum that is exuded from certain trees, such as the Acacia Senegal tree. It's a source of dietary fiber that can dissolve in water. Gum Arabic tends to make people feel full, so they might stop eating earlier than they otherwise would.
Glass bead blasting involves using spherical glass media to give a uniform finish on components surfaces at high pressure. On the other hand, the traditional sandblasting technique uses silica sand to confer surface finish on the material. Sandblasting is much quicker than bead blasting.
Uncoated Calcium Carbonate CaCO3 â?? is synthetic calcium carbonate. It is white ultra fine crystalline powder having consistent Particle Size Distribution and Excellent dispersibility. The particle size, as well as the crystal form, is controlled by temperature, concentration of reactants and time.
Calcium carbonate is quite a common mineral that can be found throughout the world. In fact, it's estimated that about 4% of the world's crust is covered by calcium carbonate. Calcium carbonate can take many forms such as limestone, chalk, marble, and others.
Calcium carbonate is a chemical compound with the chemical formula CaCO . It is a common substance found in rocks as the minerals calcite and aragonite and is the main component of eggshells, gastropod shells, shellfish skeletons and pearls.
Formula: CaCO3
Molar mass: 100.0869 g/mol
IUPAC ID: Calcium carbonate
Density: 2.71 g/cm
Melting point: 825 C
ChemSpider ID: 9708
Precipitated calcium carbonate, or PCC, is a synthetic calcium carbonate product. It is derived from, and possesses, the same chemical formula (CaCO3) as natural calcium carbonate (limestone), but is chemically purer than natural limestone.
Coated Calcium Carbonate is produced by surface coating the Regular Calcium Carbonate slurry with Fatty Acids (Stearic Acid) and Titanate Coupling Agent.
The particle size, as well as the crystal form, is controlled by temperature, concentration of reactants and time.
Calcium Carbonate CaCO3 (Coated) is a fine powder with good dispersion properties.
It is manufactured from a high purity white marble.
Coated Calcium Carbonate is produced by surface coating the Regular Calcium Carbonate slurry with Fatty Acids (Stearic Acid) and Titanate Coupling Agent.
The particle size, as well as the crystal form, is controlled by temperature, concentration of reactants, and time.
Calcium Carbonate CaCO3 (Coated) is a fine powder with good dispersion properties.
It is manufactured from a high-purity white marble.
Food Grade Anhydrous 94-97% Calcium Chloride Pellets are most often used in solution form to enhance the flavor and/or texture of food products. In cheese- making, calcium chloride helps achieve desirable setting times and curd firmness, without adversely influencing cheese composition or quality.
Calcium Chloride Hydrate is an excellent water-soluble crystalline Calcium source for uses compatible with chlorides. Chloride compounds can conduct electricity when fused or dissolved in water. Chloride materials can be decomposed by electrolysis to chlorine gas and the metal.
Calcium Gluconate is the gluconate salt of calcium. An element or mineral necessary for normal nerve, muscle, and cardiac function, calcium as the gluconate salt helps to maintain calcium balance and prevent bone loss when taken orally. This agent may also be chemopreventive for colon and other cancers.
Caustic Soda is the chemical Sodium Hydroxide (Chemical Formula), also known as lye. In its purest form, the caustic, highly toxic, crystalline solid is an inorganic compound that is soluble in water and insoluble in ether and other non-polar solvents. Caustic soda has many industrial applications that include the manufacture of pulp and paper, textiles, drinking water, soaps, detergents, and drain cleaner.
Ammonium polyphosphate is an inorganic salt of polyphosphoric acid and ammonia containing both chains and possibly branching. Its chemical formula is [NH4 PO3]n(OH)2 showing that each monomer consists of an orthophosphate radical of a phosphorus atom with three oxygens and one negative charge neutralized by an ammonium cation leaving two bonds free to polymerize. In the branched cases some monomers are missing the ammonium anion and instead link to three other monomers.
The properties of ammonium polyphosphate depend on the number of monomers in each molecule and to a degree on how often it branches. Shorter chains (n1000),[1] but short polymer chains (e.g. pyro-, tripoly-, and tetrapoly-) are more soluble and show increasing solubility with increasing chain length.
Ammonium polyphosphate can be prepared by reacting concentrated phosphoric acid with ammonia. However, iron and aluminum impurities, soluble in concentrated phosphoric acid, form gelatinous precipitates or "sludges" in ammonium polyphosphate at pH between 5 and 7.[3] Other metal impurities such as copper, chromium, magnesium, and zinc form granular precipitates.[4] However, depending on the degree of polymerization, ammonium polyphosphate can act as a chelating agent to keep certain metal ions dissolved in solution.
Di Calcium Phosphate (Animal Feed Grade)
is the calcium phosphate with the formula CaHPO and its dihydrate. The "di" prefix in the common name arises because the formation of the HPO 2 anion involves the removal of two protons from phosphoric acid, H PO It is also known as dibasic calcium phosphate or calcium monohydrogen phosphate.
Magnesium sulfate heptahydrate is a hydrate that is the heptahydrate form of magnesium sulfate. It has a role as a laxative and a cathartic. It is a magnesium salt and a hydrate. It contains a magnesium sulfate.
Mono Calcium Phosphate is manufactured by taking a reaction between Calcium Oxide (Cao) and phosphoric acid (H3PO4). The resulting slurry of MCP is solidified in a granulator.
Mono Potassium phosphate is the inorganic compound with the formula KH PO . Together with dipotassium phosphate it is often used as a fertilizer, food additive, and buffering agent. The salt often cocrystallizes with the dipotassium salt as well as with phosphoric acid.
Monosodium Phosphate, also known as monobasic sodium phosphate and sodium dihydrogen phosphate, is an inorganic compound of sodium with a dihydrogen phosphate anion. One of many sodium phosphates, it is a common industrial chemical. The salt exists in an anhydrous form, as well as mono- and dihydrates.
SODIUM SULFATE anhydrous is an electrolyte replenisher and is used in isosmotic solutions so that administration does not disturb normal electrolyte balance and does not lead to absorption or excretion of water and ions. Sodium sulfate is an inorganic sodium salt.
Disodium 5'-ribonucleotides
Disodium 5'-ribonucleotides or I+G, E number E635, is a flavor enhancer that is synergistic with glutamates in creating the taste of umami.
It is a mixture of L-lactic acid and L-calcium lactate. The product is white granule or powder with mild and pure acidity, soluble in hot water and deliquescence. Often used as food or feed additives, it can improve the flavor of food and extend shelf life.
Molybdenum Trioxide
Molybdenum Trioxide is a white, odorless powder which turns yellow when heated. It is used in agriculture, making other Molybdenum compounds, ceramic glazes, enamels, pigments, and analytical chemistry.
Trisodium Phosphate (TSP)
Trisodium Phosphate (TSP) is the inorganic compound with the chemical formula Na 3PO 4. It is a white, granular or crystalline solid, highly soluble in water, producing an alkaline solution. TSP is used as a cleaning agent, builder, lubricant, food additive, stain remover, and degreaser.
Di Ammonium hydrogen phosphate; chemical formula (NH4)2(HPO4) is one of a series of water-soluble ammonium phosphate salts that can be produced when ammonia reacts with phosphoric acid.Solid diammonium phosphate shows a dissociation pressure of ammonia as given by the following expression and equation:
(NH4)2HPO4(s) NH3(g) + (NH4) H2PO4(s) At 100 �°C, the dissociation pressure of diammonium phosphate is approximately 5 mmHg.
Dipotassium phosphate is the inorganic compound with the formula. Together with monopotassium phosphate, it is often used as a fertilizer, food additive, and buffering agent. It is a white or colorless solid that is soluble in water.
Magnesium oxide is a hygroscopic white powder that forms magnesium hydroxide in the presence of water, it was historically known as magnesia alba (white mineral from Magnesia). Oxide compounds are not conductive to electricity. ... They are compounds containing at least one oxygen anion and one metallic cation.
It is white crystalline powder and sold in different grades based on its purity viz 95%, 99% and 99.6% christened as Commercial, Technical and Export respectively in our star Oxochem pvt ltd.
Oxalic Acid Commercial and Oxalic Acid Technical is being sold in 50 Kg HDPE Bags, while Oxalic Acid Export is being sold in 25 Kg HDPE bags as well as in PP Jumbo Bags.
Potassium Iodate (KIO3) is an ionic chemical compound consisting of K+ ions and IO3 ions in a 1:1 ratio.
Potassium Dichromate is an orange to red colored, crystalline, inorganic compound that emits toxic chromium fumes upon heating. Potassium dichromate is highly corrosive and is a strong oxidizing agent.
Description: White crystalline powder, free from extraneous Matter with a faint odour of sulphur dioxide gas.
Our Potassium Meta Bisulphite is used as a photographic chemical, dyes intermediate and preservative chemical. These are white free-flowing powder, free from foreign particles. Our range is widely appreciated by clients due to accurate composition, precise pH value, purity and effectiveness.
Potassium Metabisulphite, K2S2O5, also known as potassium pyrosulfite, is a white crystalline powder with a pungent odour. It is mainly used as an antioxidant or chemical sterilant. As a disulfite, it is chemically very similar to sodium Metabisulphite, with which it is sometimes used interchangeably.
Tetrasodium Pyrophosphate is an odorless, white powder or granular solid. It is used in household and industrial cleaning compounds, as a water softener, metal cleaner and food additive, and for oil well drilling. Hazardous Substance List because it is cited by NIOSH.
L-arginine is an amino acid that helps the body build protein. Your body usually makes all the L-arginine it needs. L-arginine is also found in most protein-rich foods, including fish, red meat, poultry, soy, whole grains, beans and dairy products. As a supplement, L-arginine can be used orally and topically.
L-glutamine is an amino acid commonly found as a component in total parenteral nutrition. A non-essential amino acid is present abundantly throughout the body and is involved in many metabolic processes. It is synthesized from glutamic acid and ammonia.
Specifications of Encapsulated Fumaric Acid:Lead: Not more than 2 mg/kg. Maleic Acid: Not more than 0.1%. Residue on Ignition: Not more than 0.1%. Water: Not more than 0.5%.
(ZINC CITRATE FOOD GRADE)
It is organic zinc. Citric acid in the body can be involved in the citric acid cycle, and enhance the function of human digestion and absorption. So it can be absorbed fast and easily.
Sodium Citrate Anhydrous is derived from citric acid and is available in either free-flowing colorless granular, fine granular or powder forms. It is odorless and freely soluble in water, but insoluble in alcohol. Storage at room temperature in tightly sealed containers is recommended.
Ammonium Dihydrogen Phosphate, also known as monoammonium phosphate is a chemical compound with the chemical formula. ADP is a major ingredient of agricultural fertilizers and some fire extinguishers. It also has significant uses in optics and electronics.
BCAA POWDER
BCAA instant drink offers essential amino acids as an easy-to-use powder with a refreshing and delicious taste. BCAA stands for branched-chain amino acids and there are three BCAAs: leucine, isoleucine, and valine. Amino acids are the basic building blocks of protein.
NC COTTON HOLLASO Nitrocellulose (also known as cellulose nitrate, flash paper, flash cotton, guncotton, pyroxylin and flash string, depending on form) is a highly flammable compound formed by nitrating cellulose through exposure to a mixture of nitric acid and sulfuric acid.
The dehydration process typically involves slicing the onions and garlic into small pieces and then subjecting them to heat and airflow to remove the moisture content. The dehydrated onions and garlic can then be packaged for sale or further processed into other products such as powders, flakes, or granules.
The dehydration process typically involves slicing the onions and garlic into small pieces and then subjecting them to heat and airflow to remove the moisture content. The dehydrated onions and garlic can then be packaged for sale or further processed into other products such as powders, flakes, or granules.
The dehydration process typically involves slicing the onions and garlic into small pieces and then subjecting them to heat and airflow to remove the moisture content. The dehydrated onions and garlic can then be packaged for sale or further processed into other products such as powders, flakes, or granules.
Gluten is a protein naturally found in some grains including wheat, barley, and rye. It acts like a binder, holding food together and adding a stretchy quality think of a pizza maker tossing and stretching out a ball of dough. Without gluten, the dough would rip easily.
POLYDEXTROSE
Polydextrose also known as poly-d-glucose is a nondigestible polysaccharide. It is used as a new alternative to encapsulating agents for encapsulation. It is a synthetic, water-soluble polymer that has a low caloric value (approximately 1 kcal/g), and can be a substitution for sugar.
Stevia contains natural compounds, especially stevioside and rebaudioside A, that are estimated to be 150â??400 times sweeter than saccharose. Used for centuries in parts of South America, stevia has been discovered in recent years by much of the calorie-conscious modern world.
Dextrins are white, yellow, or brown powder that are partially or fully water-soluble, yielding optically active solutions of low viscosity. Most of them can be detected with iodine solution, giving a red coloration; one distinguishes erythrodextrin (dextrin that colours red) and achrodextrin (giving no colour).
Dextrins are white, yellow, or brown powders that are partially or fully water-soluble, yielding optically active solutions of low viscosity. Most of them can be detected with iodine solution, giving a red coloration; one distinguishes erythrodextrin (dextrin that colors red) and achrodextrin (giving no color).
Carrageen an Gum Food Grade
A natural gelling agent derived from seaweed, carrageen binds moisture and improves the texture, viscosity and firmness of a variety of foods. Carrageenans are everywhere.
Glass bead blasting involves using spherical glass media to give a uniform finish on components surfaces at high pressure. On the other hand, the traditional sandblasting technique uses silica sand to confer surface finish on the material. Sandblasting is much quicker than bead blasting.
Intermix Glass Beads are blended in the formulation of the road marking paint, in the thick applied materials, as the striping material wears the glass beads that are blended in the material are exposed to give continuous retro-reflectivity, increasing the life of the material.
Features:
Superior Night Visibility and Retro Reflectivity
High sphericity
Excellent durability and perfect bead gradation
Abrasion resistant
For Cleaning, Finishing, and Peening of Metal Parts and Surfaces
Impart a controlled, clean finish on a variety of metals
Clean quickly without significant metal removal
Provide a unique surface finish
Survives multiple process cycles
Contains no free silica
Environmentally safe
Backed by Potters Technical Support
Meets both Mil and AMS Specs For Heavy Metal Limits
Drop on Glass Beads gives immediate retro-reflectivity by being dropped on the surface of uncured striping material
Features:
Superior Night Visibility and retro-reflectivity
High sphericity
Excellent Durability and perfect bead gradation
Abrasion resistant
With moisture proof Coating for Drop On
EVA is manufactured by Dow autoclave high-pressure process and designed variety of hot melt adhesive applications. EVA is well known for its excellent adhesive property, mixing property with other raw materials, and high quality assurance
Features:
Excellent Adhesive
Property
High Wet Tack
Good Creep Resistance
Water Resistance
EVA is manufactured by Dow autoclave high pressure process and designed variety hot melt adhesive application. EVA is well known for its excellent adhesive property, mixing property with other raw materials and high quality assurance.
Features:
Excellent Adhesive
Property
High Wet Tack
Good Creep Resistance
Water Resistance
EVA is manufactured by Dow autoclave high-pressure process and designed variety of hot melt adhesive applications. EVA is well known for its excellent adhesive properties, mixing properties with other raw materials, and high-quality assurance.
Features:
Excellent Adhesive
Property
High Wet Tack
Good Creep Resistance
Water Resistance
Natural flake graphite is formed when carbon material is subjected to high pressure and high temperature. The carbon source material can be either organic or inorganic, although most commercially sourced flake graphite comes from organic deposits.
Graphite powder (Synthetic Natural), also called plumbago or black lead, mineral consisting of carbon. ... Graphite is dark gray to black, opaque, and very soft (with a hardness of 1 1/2 on the Mohs scale), while diamond may be colourless and transparent and is the hardest naturally occurring substance.
Expandable graphite is a synthesized intercalation compound of graphite that expands or exfoliates when heated. This material is manufactured by treating flake graphite with various intercalation reagents that migrate between the graphene layers in a graphite crystal and remain as stable species.
Graphite powder (Synthetic Natural), also called plumbago or black lead, mineral consisting of carbon. Graphite is dark gray to black, opaque, and very soft (with a hardness of 1 1/2 on the Mohs scale), white diamond may be colorless and transparent and is the hardest naturally occurring substance.
In graphite industry, high purity graphite generally refers to graphite containing more than 99.99% carbon. High purity graphite can be subdivided into fine grain graphite, coarse grain graphite, ultrafine grain graphite and so on. High purity graphite is generally widely used in czochralski crystal grower.
Guar Gum, also called guaran, is a galactomannan polysaccharide extracted from guar beans that has thickening and stabilizing properties useful in food, feed, and industrial applications. The guar seeds are mechanically dehusked, hydrated, milled and screened according to application.
Locust bean gum
Locust bean gum is extracted from the seeds of the carob tree. In many ways, this tropical tree is similar to the cacao plant, from which chocolate is made. Locust bean gum is a fine white powder with many uses in food production. The gum is mildly sweet and has a subtle chocolate taste.
SOYA PROTEIN
A dietary protein isolated from soybeans that contains isoflavone phytoestrogens. Soy protein isolate has been shown to reduce tumor incidence and growth in some animal studies, possibly by modulating estrogen metabolism, reducing tumor cell proliferation, and inducing tumor cell apoptosis
Hydrogen Peroxide is a chemical compound with the formula H O . In its pure form, it is a very pale blue liquid, slightly more viscous than water. It is used as an oxidizer, bleaching agent, and antiseptic, usually as a dilute solution in water for consumer use, and in higher concentrations for industrial use.
Boric acid, also called hydrogen borate, boracic acid, and orthoboric acid is a weak, monobasic Lewis acid of boron. However, some of its behaviour towards some chemical reactions suggest it to be tribasic acid in the Br nsted sense as well. Boric acid is often used as an antiseptic, insecticide, flame retardant, neutron absorber, or precursor to other chemical compounds. It has the chemical formula H3BO3 (sometimes written B(OH)3), and exists in the form of colorless crystals or a white powder that dissolves in water. When occurring as a mineral, it is called sassolite.
Calcium sulfate is a calcium salt and an inorganic calcium salt. A calcium salt that is used for a variety of purposes including: building materials, as a desiccant, in dentistry as an impression material, cast, or die, and in medicine for immobilizing casts and as a tablet excipient.
Ethyl Acetate is the organic compound with the formula. This colorless liquid has a characteristic sweet smell and is used in glues, nail polish removers, and in the decaffeination process of tea and coffee.
Ferrous Sulfate is an iron salt with the chemical formula FeSO4.
Ferrous sulfate is an iron salt popularly known as green vitriol.
Imferon and iron dextran are injectable iron. Ferrous fumarate, ferrous gluconate, and ferrous sulfate are generic names for oral iron.
Potassium carbonate (K2CO3) is a white salt, soluble in water (insoluble in ethanol) which forms a strongly alkaline solution. It can be made as the product of potassium hydroxide's absorbent reaction with carbon dioxide.
Potassium Chloride is a metal halide salt composed of potassium and chlorine. It is odorless and has a white or colorless vitreous crystal appearance. The solid dissolves readily in water, and its solutions have a salt-like taste. Potassium chloride can be obtained from ancient dried lake deposits.
Potassium Citrate is also known as Tri Potassium Citrate which is potassium salt of citric acid with the molecular formulation. This is also available in IP/BP/USP Pharmacopeia.
Feature:
â?¢ Potassium Citrate is white hygroscopic crystalline powder.
â?¢ It is Odorless with the saline taste.
â?¢ Very soluble in Water & Glycerin, where practically insoluble in Ethanol.
Uses:
Potassium Citrate is potassium salt widely used as acidity regulator & preservative in food & Beverages.
Further it can be used in a wide variety of industries like Food, Beverages and Pharmaceutical etc.
Packaging & Storage:
25 kg Printed Paper Bag
Stored in a dry & ventilated warehouse.
Kept away from the moisture & Heat.
Potassium Hydroxide is an inorganic compound with the formula KOH, and is commonly called caustic potash. Along with sodium hydroxide, KOH is a prototypical strong base. It has many industrial and niche applications, most of which exploit its caustic nature and its reactivity toward acids.
Acid Sulphamics colourless, water-soluble compound finds many applications. Sulfamic acid melts at 205 C before decomposin g at higher temperatures to water, sulfur trioxide, sulfur dioxide and nitrogen.
Zinc Borate is an inorganic compound, a borate of zinc. It is a white crystalline or amorphous powder insoluble in water. Its toxicity is low. Its melting point is 980 C.
It is a white crystalline powder 120 times sweeter than sucrose and has high water solubility. Acesulfame K is heat-stable so it can be used in cooking and baking. It may have a bitter after taste when used alone to sweeten food or beverages.
Borax is a powdery white substance, also known as sodium borate, sodium tetraborate, or disodium tetraborate. It's widely used as a household cleaner and a booster for laundry detergent. It's a combination of boron, sodium, and oxygen.
Calcium lactate is a commercially produced food additive used to stabilize, thicken, flavor, firm, or leaven foods. It's also used in water treatment facilities or added to animal feed, calcium supplements, or pharmaceutical drugs.
Casein is the main protein found in milk which contains 21 amino acids. It is completely insoluble in water, completely stable in alkali, and heat stable.
Casein manufactured by us includes Sodium Caseinate, Calcium Caseinate, Technical Casein, Industrial Casein, Edible Casein, and various other types of Casein. We can customize Casein as per our client's requirements.
FERRIC ORTHOPHOSPHATE
Ferric Orthophosphate (2 Hydrate) Ferric Orthophosphate is one of several iron compounds recognized as effective in fortification. It is used in foods where stability is an important consideration. Certain iron compounds adversely affect colour, odor and taste of some food products.
Ferric pyrophosphate is an iron replacement product. You normally get iron from the foods you eat. Iron helps your body produce red blood cells that carry oxygen through your blood to tissues and organs. Ferric pyrophosphate is used to treat iron deficiency in people with chronic kidney disease who are on dialysis.
Isomalt Power
Isomalt is a low-energy sugar-free bulk sweetener that does not promote tooth decay. It is an odorless, crystalline, and nonhygroscopic white powder and is also available as an aqueous solution. It has a sweetness that is about half of sucrose.
Lead(II) acetate is a white crystalline chemical compound with a sweetish taste. Lead(II) acetate is used as a mordant in textile printing and dyeing, as a drier in paints and varnishes, and in preparing other lead compounds. It was historically used as a sweetener and for cosmetics.
POTASSIUM SORBATE
Potassium sorbate is a white crystalline solid at room temperature, the pure compound has a melting point range between 132 C to 137 C and a density of 1.363g/cm3. At a temperature above 60 C, potassium sorbate will begin to sublime. It is soluble in water, ethanol, propylene glycol and ethyl alcohol.
Sodium metasilicate
Sodium metasilicate is a chemical substance with the formula Na
2SiO3, which is the main component of commercial sodium silicate solutions. It is an ionic compound consisting of sodium cations Na+
and the polymeric metasilicate anions [ SiO2
3 ]n. It is a colorless crystalline hygroscopic and deliquescent solid, soluble in water (giving an alkaline solution) but not in alcohols
Sodium metasilicate
Sodium metasilicate is a chemical substance with the formula Na
2SiO3, which is the main component of commercial sodium silicate solutions. It is an ionic compound consisting of sodium cations Na+
and the polymeric metasilicate anions SiO2
3â??]n. It is a colorless crystalline hygroscopic and deliquescent solid, soluble in water (giving an alkaline solution) but not in alcohols
SODIUM SULFATE
SODIUM SULFATE Anhydrous is an electrolyte replenisher and is used in isosmotic solutions so that administration does not disturb normal electrolyte balance and does not lead to absorption or excretion of water and ions. Sodium sulfate is an inorganic sodium salt.
Sodium Tripolyphosphate
Sodium Tripolyphosphate is an inorganic compound. It is the sodium salt of the polyphosphate penta-anion, which is the conjugate base of triphosphoric acid. It is produced on a large scale as a component of many domestic and industrial products, especially in the ceramic Industry & detergents. Environmental problems associated with eutrophication are attributed to its widespread use.
Sodium Tripolyphosphate
Sodium Tripolyphosphate is an inorganic compound. It is the sodium salt of the polyphosphate penta-anion, which is the conjugate base of triphosphoric acid. It is produced on a large scale as a component of many domestic and industrial products, especially in the ceramic Industry & detergents. Environmental problems associated with eutrophication are attributed to its widespread use.
Zinc carbonate
Zinc carbonate is a white crystalline powder that occurs naturally as granular or earthy masses. It is referred to as smithsonite or calamine or zinc spar. In pure form, it is colourless and transparent but more frequently coloured by the presence of iron, manganese, copper, etc.
Zinc Sulphate monohydrate 33%
Zinc is one of the essential micronutrients that acts as a catalyst for activating enzymes required for synthesis of plant proteins. IFFCO Zinc Sulphate Monohydrate (Zn 33%, S- 15%) prevents and corrects the zinc deficiency in crops.
Acetic acid systematically named ethanoic acid is an acidic, colourless liquid and organic compound with the chemical formula CH3COOH (also written as CH3CO2H, C2H4O2, or HC2H3O2). Vinegar is no less than 4% acetic acid by volume, making acetic acid the main component of vinegar apart from water and other trace elements.
Acetic acid is the second simplest carboxylic acid (after formic acid). It is an important chemical reagent and industrial chemical, used primarily in the production of cellulose acetate for photographic film, polyvinyl acetate for wood glue, and synthetic fibers and fabrics. In households, diluted acetic acid is often used in descaling agents. In the food industry, acetic acid is controlled by the food additive code E260 as an acidity regulator and as a condiment. In biochemistry, the acetyl group, derived from acetic acid, is fundamental to all forms of life. When bound to coenzyme A, it is central to the metabolism of carbohydrates and fats.
Product Characters White Crystalline Powders, Colorless Crystals or Granules
Executive Standard BP/USP/FCC/E330/GB1886.235-2016
Packaging 25kg net composite paper-plastic bag or 3-ply kraft paper bag with PE liner,Form-Fill-Seal heavy packaging PE bags 500kg or 1000kg net PP woven Jumbo bag with PE liner
Storage kept in a clean,dry,well-ventilated place
Main Usage Citric Acid is mainly used as acidulant, flavoring agent, preservative and antistaling agent in food and beverage industry, it is also used as antioxidant, plasticizer and detergent in chemical, cosmetics and cleaning industries.
Lead(II) acetate, also known as lead acetate, lead diacetate, plumbous acetate, sugar of lead, lead sugar, salt of Saturn, or Goulard's powder, is a white crystalline chemical compound with a slightly sweet taste.
Manganese(II) chloride is the dichloride salt of manganese, MnCl2. This inorganic chemical exists in the anhydrous form, as well as the dihydrate (MnCl2 ·2H2O) and tetrahydrate (MnCl2 ·4H2O), with the tetrahydrate being the most common form. Like many Mn(II) species, these salts are pink, with the paleness of the color being characteristic of transition metal complexes with high spin d5 configurations.
Manganese sulfate is a metal sulfate in which the metal component is manganese in the +2 oxidation state. It has a role as a nutraceutical. It is a metal sulfate and a manganese molecular entity. It contains a manganese(2+).
Sodium Benzoate is an organic sodium salt resulting from the replacement of the proton from the carboxy group of benzoic acid by a sodium ion. It has a role as an antimicrobial food preservative, a drug allergen, an EC 1.13. ...
Sodium Bicarbonate a white crystalline weakly alkaline salt NaHCO3 used especially in baking powders and fire extinguishers and in medicine as an antacid. called also baking soda, bicarbonate of soda.
Sodium Hexametaphosphate is a salt of composition Na PO Sodium hexametaphosphate of commerce is typically a mixture of metaphosphates, of which the hexamer is one, and is usually the compound referred to by this name. Such a mixture is more correctly termed sodium polymetaphosphate.
Sodium Dithionite (also known as sodium Hydrosulfite) is a white crystalline powder with a sulfurous odor. Although it is stable in dry air, it decomposes in hot water and in acid solutions.
Sodium metabisulphite or sodium pyrosulphite) is an inorganic compound of chemical formula Na2S2O5.
The substance is sometimes referred to as disodium metabisulfite. It is used as a disinfectant, antioxidant, and preservative agent.
We offer high-quality Tetrapotassium Pyrophosphate to our customers. The product occurs as a white or colorless crystal or is granular; it is highly hygroscopic. We offer this product at a competitive market price in custom requirements; the product is also shipped promptly without delays. Tetrapotassium Pyrophosphate is used as a sequestering agent; it is also used widely for its deflocculating/dispersion properties and is used in liquid detergents.
Calcium pyrophosphate (Ca2P2O7) is a chemical compound, an insoluble calcium salt containing the pyrophosphate anion. There are several forms reported: an anhydrous form, a dihydrate, Ca2P2O72H2O, and a tetrahydrate, Ca2P2O74H2O.
Disodium pyrophosphate or sodium acid pyrophosphate (SAPP) is an inorganic compound consisting of sodium captions and pyrophosphate anion. It is a white, water-soluble solid that serves as a buffering and chelating agent, with many applications in the food industry.
Finastat-9500 Nitrogen free oleo chemical derivative. Acts as antistatic agent. Ensures the uniform cell structure stabilization. Offers balanced lubricating properties and reduced cycle time. Exhibits very good synergistic effect. Ensures rapid mold filling. Provides very good thermal stability. Possesses no yellowing/discoloration properties. Can be used in PE/PP films, PE/PP foams, EVA footwear/sheet compounds, SAN, EPS, PVC, PET.
Aluminum hydroxide is an inorganic salt used as an antacid. It is a basic compound that acts by neutralizing hydrochloric acid in gastric secretions. Subsequent increases in pH may inhibit the action of pepsin.
Aluminium hydroxide or alumina tri hydrate (ATH) is the hydrated oxide of aluminium. Alumina hydrate is separated from bauxite ore using the Bayer process, with average particle size ranging from 80-100 micron. The block crystals of alumina hydrate impart good chemical reactivity. Alumina hydrate can react with a base as well as an acid, and finds use in many applications as raw material.
Chlorinated polyethylene
Chlorinated polyethylene (PE-C or CPE) is an inexpensive variation of polyethylene, where chlorine is substituted for some of the hydrogen atoms. CPE has a chlorine content of 34 to 44%. Due to its soft, rubbery texture, CPE is added to polyvinyl chloride to increase its impact and weather resistance
Copper sulfate, also known as copper sulfate, is the inorganic compound with the chemical formula CuSO4(H2O)x, where x can range from 0 to 5. The Cu(II)(H2O)4 centers are interconnected by sulfate anions to form chains. Anhydrous copper sulfate is a light grey powder.
Disodium Phosphate (DSP)
Disodium Phosphate (DSP), disodium hydrogen phosphate, or sodium phosphate dibasic, is an inorganic compound with the formula Na2HPO4. It is one of several sodium phosphates. The salt is known in anhydrous form as well as forms with 2, 7, 8, and 12 hydrates.
Ferric pyrophosphate
Ferric pyrophosphate (FPP) is a water-soluble and stable compound that is known to trigger the direct transformation of transferrin to ferritin, thus boosting iron exchange between transferrin molecules [126]. Vaka and colleagues investigated the influence of ETP on the transcutaneous absorption of FPP [126].
Ferric pyrophosphate (FPP) is a water-soluble and stable compound that is known to trigger the direct transformation of transferrin to ferritin, thus boosting iron exchange between transferrin molecules [126]. Vaka and colleagues investigated the influence of ETP on the transcutaneous absorption of FPP [126].
Lead(II) acetate is a white crystalline chemical compound with a sweetish taste. Lead(II) acetate is used as a mordant in textile printing and dyeing, as a drier in paints and varnishes, and in preparing other lead compounds. It was historically used as a sweetener and for cosmetics.
Magnesium Carbonate is a magnesium salt with the formula CMgO3. Its hydrated forms, particularly the di-, tri-, and tetrahydrates occur as minerals. It has a role as an antacid and a fertilizer. It is a magnesium salt, a carbonate salt, and a one-carbon compound.
Maltitol Powder Granules White
It is a disaccharide produced by hydrogenation of maltose obtained from starch. It has 75-90% of the sweetness of sucrose(table sugar) and nearly identical properties, It is used to replace table sugar because it is half as caloric, does not promote tooth decay, and has a somewhat lesser effect on blood glucose.
Potassium Hydroxide
Potassium hydroxide is an inorganic compound with the formula KOH, and is commonly called caustic potash.
Precipitated barium sulfate
Precipitated barium sulfate is a function filler that is superfine in nature and exhibits a low absorption threshold. It occurs as colorless orthorhombic crystals or a white amorphous powder and does not dissolve in water, ethanol, and acid but is soluble in hot concentrated sulfuric acid.
SODIUM DIACETATE
Sodium diacetate is a fungicide and bactericide registered to control molds and bacteria, and thus prevent spoilage, in stored grains. The pesticide is applied to hay as a dust or soluble concentrate (liquid spray) during the baling process.
Sodium Hexametaphosphate
Sodium Hexametaphosphate is a salt of composition Na PO Sodium hexametaphosphate of commerce is typically a mixture of metaphosphates, of which the hexamer is one, and is usually the compound referred to by this name. Such a mixture is more correctly termed sodium polymetaphosphate.
Tin Oxide Polishing Powder SnO2, CAS RN: 18282-10-5: is a white powder compound, not soluble in water, soluble in concentrated sulfuric acid(h2so4) the reaction between tin (sn) and concentrated nitric acid (hno3) at high temperatures, used as a polishing agent for glass, metals, and metallic dental restorations.
Zinc Acetate is a salt with the formula Zn(CH CO which commonly occurs as a dihydrate. Zn(CH CO 2H O. Both the hydrate and the anhydrous forms are colorless solids that have been used as dietary supplements. Zinc acetates are prepared by the action of acetic acid on zinc carbonate or zinc metal.
A popular seasoning and flavor enhancer, AJI-NO-MOTO , an MSG (monosodium glutamate) product, is the purest form of umami, the fifth taste, altogether different from sweet, salty, sour and bitter. AJI-NO-MOTO is widely used to intensify and enhance umami flavors in sauces, broths, soups and many more foods.
Ammonium Chloride (NH4Cl),also called sal ammoniac, the salt of ammonia and hydrogen chloride. Its principal uses are as a nitrogen supply in fertilizers and as an electrolyte in dry cells, and it is also extensively employed as a constituent of galvanizing, tinning, and soldering fluxes to remove oxide coatings from metals and thereby improve the adhesion of the solders. It is a component of many proprietary cold medicines and cough remedies because of its efficacy as an expectorant, and in veterinary medicine, it is used to prevent urinary stones in goats, cattle, and sheep.
Ammonium chloride is a colourless crystalline substance. It is highly soluble in water, readily forming a slightly acidic solution. It vaporizes without melting at 340 �°C (644 �°F) to form equal volumes of ammonia and hydrogen chloride. Ammonium chloride is yielded as a by-product in the ammonia-soda process for making sodium carbonate. It also is produced by reaction of ammonium sulfate and sodium chloride solutions. When mixed with slaked lime (calcium carbonate), ammonia gas is the result.
Antimony Oxide is the inorganic compound with the formula Sb2O3. It is the most important commercial compound of antimony. It is found in nature as the minerals valentinite and senarmontite.
Like most polymeric oxides, Sb2O3 dissolves in aqueous solutions with hydrolysis. A mixed arsenic-antimony oxide occurs in the nature as the very rare mineral stibioclaudetite
Most frequently it caustic potash comes as a white solid that can be dissolved in less than its own weight of water. It has universal applications in soaps and detergents, fertilizers, and industrial operations. It is also used in molten salts, dyes, pharmaceuticals, and photographic chemicals.
Cobalt Chloride which is an inorganic compound of chlorine and cobalt. It is used to test for the existence of water discharging from the tiny cracks in pipes whereas when water is nearby, the test paper changes from blue to pink color. Cobalt Chloride is an absorbing compound that changes color in response to humidity. This product is also used as a coarse for other cobalt composites that can be formed in batteries, magnets, lotions, buttons, tyres, dyes, etc.
Copper sulfate, also known as copper sulphate, are the inorganic compounds with the chemical formula CuSO4(H2O)x,
where x can range from 0 to 5. ...The Cu(II)(H2O)4 centers are interconnected by sulfate anions to form chains. Anhydrous copper sulfate is a light grey powder.
Potassium Sorbate is a chemical additive. It's widely used as a preservative in foods, drinks, and personal care products. It is an odorless and tasteless salt synthetically produced from sorbic acid and potassium hydroxide. ... Its safety and uses as a preservative have been researched for the last fifty years.
Sodium Chloride, commonly known as salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. With molar masses of 22.99 and 35.45 g/mol respectively, 100 g of NaCl contains 39.34 g Na and 60.66 g Cl.
Tri Calcium Phosphate (sometimes abbreviated TCP) is a calcium salt of phosphoric acid with the chemical formula Ca3(PO4)2. It is also known as tribasic calcium phosphate and bone phosphate of lime (BPL). It is a white solid of low solubility. Most commercial samples of "tricalcium phosphate" are in fact hydroxyapatite.
Tri Sodium Citrate also known as Trisodium citrate is the sodium salt of citric acid. It is white, crystalline powder or white, granular crystals, slightly deliquescent in moist air, freely soluble in water, practically insoluble in alcohol. Like citric acid, it has a sour taste. From the medical point of view, it is used as alkalinizing agent. It works by neutralizing excess acid in the blood and urine. It has been indicated for the treatment of metabolic acidosis.
Aluminium silicate is a type of fibrous material made of aluminium oxide and silicon dioxide, (such materials are also called aluminosilicate fibres). These are glassy solid solutions rather than chemical compounds. The compositions are often described in terms of % weight of alumina, Al2O3 and silica, SiO2.
Barium carbonate is a white powder. It is insoluble in water and soluble in most acids, with the exception of sulphuric acid. It has a specific gravity of 4.275. It is toxic by ingestion.
Calcium casein is one of several milk proteins derived from casein in skim and 1% milk. Calcium casein has a papery, sweet, and overall bland flavor, and is primarily used in meal preparation and fat breakdown.
Citric Acid Monohydrate 25kg
Product Characters White Crystalline Powders, Colorless Crystals or Granules
Executive Standards BP/USP/FCC/E330/GB1886.235-2016
Packaging 25kg net composite paper-plastic bag or 3-ply kraft paper bag with PE liner, Form-Fill-Seal heavy packaging PE bags 500kg or 1000kg net PP woven Jumbo bag with PE liner
Storage kept in a clean, dry,well-ventilated place
Main Usage Citric Acid is mainly used as an acidulant, flavoring agent, preservative, and antistaling agent in the food and beverage industry, it is also used as an antioxidant, plasticizer, and detergent in chemical, cosmetics, and cleaning industries.
Dextrose Monohydrate
Dextrose Monohydrate is the monohydrate form of D-glucose, a natural monosaccharide and carbohydrate. Dextrose serves to replenish lost nutrients and electrolytes.
Dicalcium Phosphate Anhydrous:
White and odorless powder; it is soluble in diluted Hydrochloric Acid, Nitric Acid and Acetic Acid; slightly soluble in water but insoluble in Ethanol; stable in air; its relative density is: 2.32.
Dicalcium Phosphate Dihydrate:
White monoclinic crystal powder; odorless and colorless; it is soluble in diluted Hydrochloric Acid, Nitric Acid and Acetic Acid; slightly soluble in water but insoluble in Ethanol; its relative density is 2.32; stable in air; it will lose crystal water when heated to 75â?? and then convert to Dicalcium Phosphate Anhydrous.
In the food industry, it is used as a leavening agent, dough modifier, buffer, nutritional supplement, emulsifier, and stabilizer e.g. it is applied as a leavening agent for flour, cake, pastry, bakery, as a quality modifier for bread, and fried food. Also be applied in biscuits, milk powder, drinks, and ice cream as a nutrient supplement or quality improver. In the pharmaceutical industry, it is often used as an additive in the production of Calcium tablets or other tablets. In the daily chemical industry, it is used as a friction agent.
Distilled monoglycerides(DMG)
Distilled monoglycerides(DMG) are monoglycerides that are synthesized and undergo molecular distillation technique to separate and concentrate the monoglycerides from some diglycerides (and triglycerides). It is done because monoglycerides are considered much more effective emulsifiers than diglycerides.
Ethylene Vinyl Acetate Co-polymers
EVA is manufactured by Dow autoclave high-pressure process and designed variety hot melt adhesive applications. EVA is well known for its excellent adhesive property, mixing property with other raw materials, and high-quality assurance
FEATURES:
Excellent Adhesive * Property * High Wet Tack * Good Creep Resistance
*Water Resistance
FERRIC AMMONIUM
Ferric ammonium citrate is a yellowish-brown to red solid with a faint odor of ammonia. It is soluble in water. The primary hazard is the threat to the environment. Immediate steps should be taken to limit its spread to the environment.
Sorbic acid
Sorbic acid, or 2,4-hexadecenoic acid, is a natural organic compound used as a food preservative. It has the chemical formula CH 3(CH) 4CO 2H and the structure H 3C CH=CH
FRUCTOOLIGOSACCHARIDES (FOS)
Fructooligosaccharides (FOS) are oligosaccharides that occur naturally in plants such as onion, chicory, garlic, asparagus, banana, and artichoke, among many others. They are composed of linear chains of fructose units, linked by beta (2-1) bonds.
GdL (glucono-delta-lactone) is a widely used acidulant in meat products, especially for dry-cured sausages. It is used when a slow release of acid is required. In the presence of water, it reverts to gluconic acid. The lowering of the pH inhibits the growth of bacteria and accelerates the drying (Bertelsen et al., 1995).
IRON PHOSPHATE
Iron phosphate is a compound that combines phosphorous and oxygen with iron. It can kill slugs and snails when eaten. The toxicity of iron compounds like this depends on the amount of available iron.
L-ASCORBIC ACID SODIUM SALT (SODIUM ASCORBATE)
L-Ascorbic acid sodium salt (Sodium ascorbate), an electron donor, is an endogenous antioxidant agent. L-Ascorbic acid sodium salt selectively inhibits Cav3.2 channels with an IC50 of 6.5 �¼M. L-ascorbic acid sodium salt is also a collagen deposition enhancer and an elastogenesis inhibitor. For research use only.
Potassium bicarbonate
Potassium bicarbonate is a white, crystalline, slightly alkaline, and salty substance. It is produced by the passage of carbon dioxide through an aqueous potassium carbonate solution.
SODIUM CASEINATE
Sodium caseinate is a compound derived from casein, a protein present in the milk of mammals. Casein is the dominant protein in cow's milk and is responsible for its opaque, white appearance. It's an integral component of many milk-based products like ice cream and cheese
SODIUM SACCHARIN
Saccharin, also called saccharine or benzo sulfimide, or used in saccharin sodium or saccharin calcium forms, is a non-nutritive artificial sweetener. Saccharin is a benzoic sulfimide that is about 500 times sweeter than sucrose, but has a bitter or metallic aftertaste, especially at high concentrations.
TARTARIC ACID
Tartaric acid is a white, crystalline organic acid that occurs naturally in many fruits, most notably in grapes, but also in bananas, tamarinds, and citrus. Its salt, potassium bitartrate, commonly known as cream of tartar, develops naturally in the process of fermentation.
Trehalose
Trehalose is a nonreducing homodisaccharide, in which two glucose units are linked together in an ±-1,1-glycosidic linkage. Trehalose is widely distributed in nature and has been biosynthesized as a stress-responsive compound in certain species.
FINALUX CS-S is used as a lubricant and release agent in the production and processing of thermoplastic compounds/masterbatches and thermosets. In the processing of thermosets, FINALUX CS-S improves flow properties and facilitates demoulding.
Vermiculite
Vermiculite is a mica, a hydrated, magnesium iron aluminum trioctahedral sheet silicate of varied composition. Its basic unit is two tetrahedral silicate sheets interlayered by an octahedral sheet that contains aluminum and iron (Grim 1962).
perlite, also called pearlstone, a natural glass with concentric cracks such that the rock breaks into small pearl-like bodies. It is formed by the rapid cooling of viscous lava or magma. Perlite has a waxy to pearly lustre and is commonly gray or greenish but may be brown, blue, or red.
Polyethylene Wax
Polyethylene Wax (PE Wax) is polyethylene that is very low in molecular weight. PE waxes are typically used as additives to modify properties of compounds in a wide variety of applications.
APAR GANDHAR
Power Oil Apar- Gandhar, For Road Construction, Packaging Type: Barrel. " Power Oil" is a plasticizer for Road marking Paints, it supports resin addition and aids in the dispersion of pigments and filters during the mixing operation. Improves the flow and flexibility to solid pain
Phosphoric Acid, is a weak acid with the chemical formula H PO The pure compound is a colorless solid. All three hydrogens are acidic to varying degrees and can be lost from the molecule as H ions. When all three H ions are removed, the result is an orthophosphate ion PO , commonly called "phosphate".
Acrolite Fast Violet KBLR Plastic is high tinctorial, redder pigment having good light fastness and weathering fastness. Suitable for all type of plastics and tinting white plastics.
Ethylene Vinyl Acetate Co-polymers
EVA is manufactured by Dow autoclave high-pressure process and designed for a variety hot melt adhesive applications. EVA is well known for its excellent adhesive properties, mixing properties with other raw materials, and high-quality assurance.
FEATURES:
Excellent Adhesive properties - high Wet Tack Good Creep Resistance
FINANOX-18 (DSTDP) is a secondary antioxidant used in polyolefins and other polymers requiring long-term heat aging properties. FINANOX-18 particularly decomposes hydroperoxides, formed by auto-oxidation of polymers and neutralizes them. It is often used as a synergist in combination with phenolic antioxidants.
SIS (STYRENE ISOPRENE STYRENE)
HAI-SISTM JH-8161 is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. JH-8161 is used as an ingredient in formulating adhesives, sealants, and coatings. It also can be used as a modifier of thermoplastics and in compound formulations.
SIS (Styrene Isoprene Styrene)
SIS (Styrene Isoprene Styrene) 5516 GRANULESSBS and SIS are thermoplastic elastomers, blends that exhibit both the elasticity and resilience of butadiene rubber or isoprene rubber (natural rubber) and the ability of polystyrene to be molded and shaped under the influence of heat.
Styrene Isoprene Styrene
White SIS (Styrene Isoprene Styrene) 5517 GRANULES, Packaging Type: BAG. It is used in hot-melt adhesives and pressure-sensitive adhesives. SIS is environmentally friendly.
BP series is specially designed for adhesives application. Characterised by lighter colour, less odour as well as wider compatibility and solubility, they are more suitable for hot melt adhesives, bookbinding, shoes adhesive and solvent adhesives etc.
C5 Hydrocarbon resin is a pale yellow C5 aliphatic hydrocarbon resin having excellent color, flow, and heat stability and thus highly recommended for Hot Melt Road Marking Paints
FEATURES:
Light Colour Gradient - Excellent Fluidity- Better Heat Stability - High Drying Rate and Anti - Abrasion Outstanding affinity for pigments Superior Process Ability Strong dirt-resistant
Hydrogenation of hydrocarbon resins is primarily done to improve the color and stability (UV and heat resistance) of the resin by removing vulnerable double bonds. Full, partial, and selective hydrogenation is a method used to produce resins with broad compatibility and good stability.
Silica sand
Silica sand, also known as quartz sand, white sand, or industrial sand, is made up of two main elements: silica and oxygen. Specifically, silica sand is made up of silicon dioxide (SiO2). The most common form of SiO2 is quartz a chemically inert and relatively hard mineral.
Precipitated silica is an amorphous form of silica (silicon dioxide, SiO2)
it is a white, powdery material. Precipitated silica is produced by precipitation from a solution containing silicate salts. ... Among them, precipitated silica has the greatest commercial significance.
Aerosil is pure silicon dioxide, made from vaporized silicon tetrachloride oxidized in high-temperature flame with hydrogen and oxygen. Owing to accurate composition, effectiveness and longer shelf life, our aerosol is highly demanded around the globe.
Potato starch boasts a smoother and more transparent texture in comparison to corn starch, which has a more opaque and gel-like texture. Temperature: Organic potato starch exhibits superior performance at high temperatures, while organic corn starch is more effective at low to medium temperatures.
Stevia contains natural compounds, especially stevioside and rebaudioside A, that are estimated to be 150 00 times sweeter than saccharose. Used for centuries in parts of South America, stevia has been discovered in recent years by much of the calorie-conscious modern world.
SWEETENERSERYTHRITOL
Natural low-calorie sweeteners Erythritol is a crystalline, white, anhydrous, non-hygroscopic solid that has very much the appearance of table sugar. Chemically, erythritol is (2R,3S)-butane-1,2,3,4-tetraol (Fig. 3.1), a linear, four-carbon polyol. It is non-reducing and, therefore, does not undergo Maillard browning.
Neotame is a blend of the amino acids aspartic acid and phenylalanine. It is 7,000 to 13,000 times sweeter than sucrose. Neotame is stable at high temperatures. It is a general all-purpose sweetener that has both cooking and baking applications.
NEOMALT 200X
Neomalt 200x is a perfect cheaper replacement of Aspartame and it gives perfect sugar-like sweetness. We can supply Neomalt 200x in bulk quantities from our ready stock.
Chemically, talc is a hydrous magnesium silicate with a chemical formula of Mg3Si4O10(OH)2. Talc has many uses in cosmetics and other personal care products. For example, it may be used to absorb moisture, to prevent caking, to make facial makeup opaque, or to improve the feel of a product.
It is a rutile titanium dioxide pigment produced by zirconia, alumina inorganic and organic surface treated, designed to give the good whiteness, excellent gloss, high tinting strength, super durability and good dispersion properties.
Titanium Dioxide (TiO2) Anatase is a water dispersible dry pigment recommended for use in the manufacture of rubber, plastics, paints and coatings, and paper. It has excellent brightness and high tint strength. Anatase (B101) is an excellent choice for filling of paper.
Rutile is a mineral composed primarily of titanium dioxide, TiO2. Rutile is the most common natural form of TiO2. Rutile has among the highest refractive indices of any known mineral and also exhibits high dispersion. Natural rutile may contain up to 10% iron and significant amounts of niobium and tantalum.
Titanium Dioxide (TiO2) Anatase is a water dispersible dry pigment recommended for use in the manufacture of rubber, plastics, paints and coatings, and paper. It has excellent brightness and high tint strength. Anatase (B101) is an excellent choice for filling of paper.
Ti-Pure R-902+ is a multipurpose rutile titanium dioxide pigment manufactured by the chloride process for both interior and exterior coatings applications. It is a fine dry powder with the following general properties. Table 1. Analysis and Physical Properties of Ti-Pure R-902+ Property.
It is a high-quality TiO2 pigment having desirable properties such as high brightness, tinting strength, good colour, and excellent dispersion for consistent optical performance.
It conforms to BIS 411:2020 standards.
Application:
This is a pigment form of TiO2 The characteristics are suitable for both aqueous and non-aqueous media. Suitable for use in interior paints, paper, plastics, linoleum, rubber, leather, furnishings, soap and cosmetics, and other applications.
Titanium Dioxide (TiO2) Anatase is a water dispersible dry pigment recommended for use in the manufacture of rubber, plastics, paints and coatings, and paper. It has excellent brightness and high tint strength. Anatase (B101) is an excellent choice for filling of paper.
R818 is a titanium dioxide pigment treated with an inorganic silicon-aluminum coating and organic solvents, which has a strong glossiness, and good hiding power, weather resistance, and dispersibility.
R878 is a multi-purpose rutile TiO2 pigment is known for its low oil absorption, high gloss, high tinting strength, durability, and dispersability. Produced by the Sulfate process, with a very fine particle size, it has excellent hiding power, blue tint undertone.
Kemox RC 822 is a silica alumina and organic treated titanium dioxide pigment produced by the chloride process. It has the highest degree of gloss and tint retention properties in exterior film applications.
Rutile is a mineral composed primarily of titanium dioxide, TiO2. Rutile is the most common natural form of TiO2. Rutile has among the highest refractive indices of any known mineral and also exhibits high dispersion. Natural rutile may contain up to 10% iron and significant amounts of niobium and tantalum.
Dawn R 2195 Titanium Dioxide
Dawn R 2195 Titanium Dioxide is a multipurpose rutile titanium dioxide pigment manufactured by the chloride process for both interior and exterior coatings applications, is an excellent raw material in Thermoplastic Road Marking Paint. This TT shows outstanding affinity for pigments and superior process ability.
TCCA 90
TCCA 90 is an outstanding source of chlorine for controlling of befouling in swimming pools. TCCA 90 GRANULAR chemical is used as a disinfecting agent in swimming pools and fountain water bodies and helps in achieving crystal clear and clean water.
WOOD PULP
Wood pulp is a virgin (or primary) fiber derived from harvested softwood or hardwood trees that are specifically grown for papermaking.
ROCK WOOL
Rock wool is produced from melting stone (diabase, dolerite) at about 1500 C, where the heated mass is hurled out from a wheel or disk and thus creates fibers.
Zinc Oxide (ZnO) is a common inorganic compound with a large number of uses. It is insoluble in water but soluble in dilute acids and bases. ZnO occurs in the mineral zincite, but most of the commercial product is made by the high-temperature oxidation of metallic zinc or zinc ores.
