CALCICOATTM calcium chloride (CaCl2) is a white, high purity granules with 94 to 97 weight percent CaCl2. It has the following features when compared to its nearest competitor:
When sprayed, the shape of granules makes them more controllable than powder shape.
Higher concentration of calcium chloride gives a higher heat of dissolution, promoting faster melting and higher penetration rate as a deicer.
CALCICOATTM Calcium chloride is used in petroleum industry as drilling mud additive and drying petroleum fractions, in cement manufacture to low alkali and acting as a source of chloride. To melt the Highway ice for sidewalks, parking lots and driveways. This high energy should be sprinkled lightly and evenly over ice surfaces at an application rate of about 2 pounds per 200 square feet. Thawing begins immediately.
Base oils are used to manufacture products including lubricating greases, motor oil and metal processing fluids. Different products require different compositions and properties in the oil. Chemical substances additives are added to the base oil to meet the quality requirements for the end products in terms of, for example, friction and cleaning properties.
Recycled Base Oil SN 150 and SN 600.
Diammonium phosphate, commonly referred to as (DAP 18-46), is the world's most used phosphate fertilizer. As a primary nutrient, DAP helps the plant to capture and convert the sun's energy into useful compounds for the plant. It also stimulates root development and enhances the durability of the stems.
Usage: In addition to its wide usage in the agricultural sector, DAP is also used to impregnate matches, and as a flame-retardant (for fighting forest fires).
EN 590 Gas Oil is a 10 ppm (parts per million) sulphur content gas oil. It has a higher cetane number than A2 Class Gas Oil (another 10ppm sulphur content class of red diesel), making it better suited to internal combustion engines in off-road vehicles. Its parameters include density at 15C (typically at this temperature it will have a density of 0.856kg/m3 with a minimum of 0.82kg/m3 required), a typical 0.1% carbon residue value (where the maximum permitted for this grade is 0.3%). The minimum flashpoint (the lowest temperature at which the fuel produces vapour that is an ignitable mixture in air near the surface of the liquid) is 56C.
Ammonia is a colourless gas (99.9% concentrated) with a strong characteristic odour. It is available in gaseous form and boils at -34C. In a liquid state, ammonia has to be transported under pressure or in a refrigerated state. The molecular formular is NH3. Ammonia contains about 82% nitrogen. Ammonia reacts strongly with acids to produce salts: Nitric acid into ammonium nitrate, sulphuric acid into ammonium sulphate, phosphoric acid into ammonium phosphates and hydrochloric acid into ammonium chloride.
Potassium Sulfate (K2SO4) is Suitable to be used for fruit trees orchards before planting or during winter service to feed all kinds of crops especially during fruit stage to increase fruit size and improving taste, firmness and shelf-life. Standard formula takes longer time to be completely dissolved in soil compared to soluble-SOP, which make potassium more available for plant for long time and increases K-use efficiency. Enhances tolerant of plants against environmental and biotic stresses. Rich in Sulfur, which is an important element for some oil crops such as onion and garlic and increases the availability of phosphorus and micro element to be used in soil.
Linear alkylbenzene (LAB) is found in all kinds of detergent formulations like for household, laundry, dishwashing. (LAB) is a basic raw material to produce linear alkylbenzene sulphonic acid (LAS). After neutralization it is the most common active ingredient in biodegradable detergents.
Heavy Alkyl Benzene (HAB) is a by-product in the process of linear alkyl benzene (LAB) production. It is the main raw material for lubricants, metal surface treatment products, including galvanic and electroplating products and Hydraulic fluids.
DCP is a DiCalcium phosphate Dihydrate product, with the formula CaHPO4.2H2O, with minimum 18% P content and up to 25 % Ca content.
Dihydrate means 2 molecules of water inside the phosphate and higher digestible product. The product has the highest digestibility of any DiCalcium phosphate one can find in the market.
Purity is closely correlated with bio-availability of phosphorus. In the traditional process the more contaminated are the raw material, the more indigestible elements the feed phosphate will contain. This is not the case with our used processing technology.
DCP is the best option to be easily used with compound feeds, premixes, and concentrates to cover the nutritional requirements of both phosphorous and Calcium in poultry, ruminants, pets, and aquatic animals.
The fertilizer numbers, which are always in the same order (N-P-K), tell you how much nitrogen, phosphorus, and potassium are in the fertilizer.
They may be whole numbers or decimals and might be the same number, like 10-10-10, but often are three different numbers.
Itâ??s even possible to have one or two of the numbers be zeros.
The numbers are a percentage of how much of each nutrient is in the fertilizer.
Since the numbers are a percentage by weight, the higher the number, the more of that nutrient there is in the fertilizer.
A 20-20-20 fertilizer has twice as much NPK in it as a 10-10-10 fertilizer.
Aqueous Urea Solution or diesel exhaust fluid (DEF) reduces harmful NOx emissions from diesel engines and enable diesel passenger cars to comply with the Euro 6 exhaust standard.
AdBlue, DEF & ARLA 32 are the global alternative brands for Aqueous Urea Solution products (AUS).
Our supply of Aqueous Urea Solution is mainly directed to our clients in Europe.
Fuel oil is any of various fractions obtained from the distillation of petroleum (crude oil). Such oils include distillates (the lighter fractions) and residues (the heavier fractions). Fuel oils include heavy fuel oil (bunker fuel), marine fuel oil (MFO), furnace oil (FO), gas oil (gas oil), heating oils (such as home heating oil), diesel fuel and others.
Fuel oil has many uses; it heats homes and businesses and fuels trucks, ships, and some cars. It is often used as a backup fuel for peaking power plants in case the supply of natural gas is interrupted or as the main fuel for small electrical generators.
Paraffin waxes in a solid state are usually white, translucent, tasteless and odorless. They are hard, relatively brittle and have a slightly dry feel. In a molten state, paraffin waxes are clear, colorless liquids of low viscosity. When melted, these waxes increase in volume by about 5-8%, resulting in a decrease in density.
Paraffin will react at high temperatures with either oxidizing or halogenating agents. This reaction produces either fatty acids and hydroxy acids or halogen substitution products respectively. Although paraffin has many useful characteristics, most commercial applications are based on its resistance to water and vapor and its glossy appearance when polished.
JET A-1 is a kerosene-type fuel. It is compatible with most jet aircraft, both civil and military, helicopter turbine engines, turboprops and compression-ignition piston engines. It has a boiling point of 150C-250C, a flashpoint over 38.0C (100F) and a maximum melting point of -47.0C.
Rock Phosphate is a mineral feedstock to produce phosphate fertilizers and phosphoric acid.
Usage: Rock phosphate does not dissolve easily in water, making it difficult for plants to assimilate. Chemical conversion via phosphoric acid produces phosphate fertilizers, such as DAP, MAP and other ammonium phosphates, which are more easily assimilated by plants.
Urea is the highest nitrogen (46 %) content fertilizer that makes it one of the most vital fertilizers for crops in agriculture. Our supply of Urea from Egypt and MENA region reaches the shores of North America, LATAM countries, Asia, and Europe (Reach Number is available).
Product Characteristics:
Nitrogen: 46% min.
Moisture: 0,5% max.
Granulometry granular (between 2 - 4 mm): 90% min.
Urea ammonium nitrate solution, commonly referred to as UAN, is a liquid nitrogen fertilizer which is made up of a mixture of urea, ammonium nitrate and water.
Nitrogen fertilizer is responsible for the production of amino acids and proteins and indirectly supports the production of vitamin B. Nitrogen application is the main factor to improve plant growth, development and yield of all crops.
Usage: The use of modern crop application methods of UAN are designed to provide very precise application of UAN to the crop. Furthermore, UAN applications can provide better economics for the farmer than dry fertilizer applications because the farmer can add other crop protection products like herbicides, insecticides and fungicides to the UAN and can be applied to the crop in a single application.
We supply Technical Grade Urea used for the manufacturing of AdBlue in accordance with ISO 22241.
