Description: PDC cutter is mainly applicable for PDC drilling bit for drilling into soft and intermediate-hardness stratum.
Size:0608, 0808, 1304, 1308, 1313, 1613, 1616, 1913, 1916
Shape: Plain/flat, Round, Spherical/Dome, Conical etc.
Description: PDC cutter is mainly applicable for PDC drilling bit for drilling into soft and intermediate-hardness stratum.
Size:0608, 0808, 1304, 1308, 1313, 1613, 1616, 1913, 1916
Shape: Plain/flat, Round, Spherical/Dome, Conical etc.
PCD sintering drill bits products are suitable for different grades of aluminum alloys and CFRP/GFRP materials. And can be used in abrasive materials in the automotive, aerospace and all composite material processing industries to meet the high quality requirements
The Micro Drilling products cover semiconductor materials, metals, ceramics and polymers. Each product has laser and beam delivery design optimized for a specific application, and can be configured for manual or automatic operation, allowing customers to buy exactly the application solution they need.
The mono-crystal tools can obtain excellent cutting edge through grinding. The surface finish of single crystal tool can reach more than 0.01micron (Ra 0.1 um)The world's top brands of raw materials: E6 single crystal .
The PCD Boring Tools are made by PCD Blanks (E6) Brazing on The Tungsten Carbide Body. Most common is full face PCD Notching Tools. PCD Boring Tools are used for Machining Various Of Tungsten Carbide Rollers. PCD Tips for Carbide Roller Notching.
Description: MORE supplies diamond honing tools designed for your specific application. The single stroke honing tool is also known as a single pass honing tool that incorporates a super abrasive sleeve mounted on a tapered mandrel for precision bore sizing and finishing.
Each individual piece of this diamond tool is designed to be matched with corresponding honing machines.
According to different workpieces, customers can choose from our existing models of honing tools, or customize a new honing tool.
Electroplated and sintered diamond honing tools are divided into adjustable fixed honing tools and adjustable floating honing tools. The honing machine is a one-piece electroplated and sintered diamond tool with a single up and down stroke to grind away the excess.
Processing materials: mild steel, hardened steel, cast iron, copper, carbide, ceramics, glass, etc.
Details
According to the different particle size of diamond, it can be used for rough honing, fine honing and fine grinding.
The superior diamond plating process ensures long tool life and low cost per part.
Improved abrasive sleeve design for chip quick removal.
Greater accuracy and increased production efficiencies.
Custom design to meet your specific requirement.
Capable of adapting to most honing machines.
Processing Part: Aluminum alloy wheel hubs for car, Aluminum Alloy Outer Circle, Head Face
Processing Way: Turning, Semi-Fishing, Fishing
Characters: PCD Turing Tools Have Long Service Life, High Efficiency And Work Pieces Have Higher Brightness Etc.
During the wheel hub machining process, uses the PCD wheel hub tool for repairing and refurbishing the aluminum alloy wheel hub rim.
The Soldering Brazed PCBN inserts are welded directly onto the blade base to form a growing, super-strong structure, without the risk of layering or cracking.
Soldering Brazed PCBN tools provide exceptional performance in precision machining of a wide variety of hardened and abrasive ferrous and superalloy materials.
The Solid CBN Inserts are made of cubic boron nitride micro power under the process of super high temperature and high press. Solid of CBN Inserts are used for rough and finish machining. More SuperHard s solid CBN inserts for multiple machining requirements. Whatever your cutting application requires, solid CBN inserts provide the best in geometry, hardness and performance.
Pistons are made from aluminium with high silicon content, resulting in a very abrasive material.
High-silicon aluminum alloy has higher hardness and wear resistance than other aluminum alloys. When cutting, the cutting tool alternately cuts soft aluminum-based and hard silicon particles, the carbide insert are easy to wear and also easily produce BUE, which will affect the roughness and processing accuracy.
In order to avoid the BUE and work hardening, the cutting edge must be sharp and the cutting edge must be smooth. PCD tool just meets all these requirements.Machining such material requires high wear resistant tooling, such as cutters and inserts made of PCD.
Description: PCD/PCBN milling cutters features
The cutting edge adopts laser technology, the cutting edge is sharp, and the cutting is light and suitable for high-speed occasions.
PCD of medium grain size has both abrasion resistance and chipping resistance, and excellent overall performance. Diameters of the same specification, different cutting edge lengths.
The cutting edge over-center design can be used for axial feed milling similar to drilling.
Optimize the groove shape to achieve a higher dynamic balance level.
The small R angle and chamfering of the cutting edge effectively increase the durability of the tool.
Description: Ceramic grade tools are typically classified into three general categories: oxide, nitride, and matrix ceramics.
Oxide ceramics are alumina-based and are generally used in roughing and finishing applications of the cast and gray irons. Increasingly, oxide ceramics are being used in dry machining applications at high speeds. This is due to the advancements within materials science, including the incorporation of whisker-based materials.
Nitride ceramics exhibit extremely high fracture toughness and are used for roughing and semi-roughing of cast irons under harsh conditions, such as when there is considerable starting and stopping that would typically increase fracturing.
CMCs contain ceramics mixed with other hard materials like cemented and titanium carbides. They can also contain reinforcing whiskers and other materials to increase wear resistance and toughness under hot machining conditions. These are commonly referred to as SiC-whisker reinforced. Alumina reinforced with SiC whiskers is the toughest and most resistant to thermal shock of the oxide-based ceramics due to the extremely high tensile strength of the SiC whiskers. It offers the additional benefit of being able to be run without coolant, thus making dry machining a common application while also being able to offer an increase in machining rates up to 800%.
Description: Ceramic grade tools are typically classified into three general categories: oxide, nitride, and matrix ceramics.
Oxide ceramics are alumina-based and are generally used in roughing and finishing applications of the cast and gray irons. Increasingly, oxide ceramics are being used in dry machining applications at high speeds. This is due to the advancements within materials science, including the incorporation of whisker-based materials.
Nitride ceramics exhibit extremely high fracture toughness and are used for roughing and semi-roughing of cast irons under harsh conditions, such as when there is considerable starting and stopping that would typically increase fracturing.
CMCs contain ceramics mixed with other hard materials like cemented and titanium carbides. They can also contain reinforcing whiskers and other materials to increase wear resistance and toughness under hot machining conditions. These are commonly referred to as SiC-whisker reinforced. Alumina reinforced with SiC whiskers is the toughest and most resistant to thermal shock of the oxide-based ceramics due to the extremely high tensile strength of the SiC whiskers. It offers the additional benefit of being able to be run without coolant, thus making dry machining a common application while also being able to offer an increase in machining rates up to 800%.
Processing Part: Aluminum alloy wheel hubs for car, Aluminum Alloy Outer Circle, Head Face
Processing Way: Turning, Semi-Fishing, Fishing
Characters: PCD Turing Tools Have Long Service Life, High Efficiency And Work Pieces Have Higher Brightness Etc.
During the wheel hub machining process, uses the PCD wheel hub tool for repairing and refurbishing the aluminum alloy wheel hub rim.
The PCD Standard Inserts are made by imported element 6, GE raw materials, used high-precision peripheral grinder to produce high-quality PCD tools. PCD Standard Inserts are widely used in high-silicon aluminum alloy, stone and other non-ferrous metals and non-metal processing.
