Road Blocker Certified (With Crash Test)
CKM Defense Hydraulic Road Blocker is the most widely used system in areas where entry and exit should be controlled and safe against all kinds of vehicle attacks, such as military facilities, government buildings, embassies, production facilities, oil refineries, hotels, airports, and stadiums.
The system is specifically designed against vehicle impacts, and its components have been reinforced to be effective in all possible attack scenarios.
Thanks to its hydraulic operating system, the CKM Defense Road Blocker System works continuously even in the busiest places. Additionally, CKM Defense Security Road blocker crash tested and certified for IWA 14-1:2013 / PAS 68 (K1) with anti-terror capability.
This system synchronizes with other security systems such as swing barriers, rising bollards, etc., keeping the defense at the highest level in case of attack, while allowing authorized vehicles to safely enter the area. It can be integrated with all kinds of Access Control Systems such as Plate Recognition Systems, HGS (Electronic Toll Collection-Fast Pass) Systems, Card Readers.
CERTIFIED (WITH CRASH TEST) TECHNICAL FEATURES
IWA 14-1:2013 (N3D) / PAS 68-P1 Certificate (Under conditions of 12,375 kg vehicle with 80.9 km/h speed and 0.64 m penetration)
Power: 380 VAC, 3-Phase, 50/60 Hz
Length: 2111�±20 mm / 3111 mm �±20 mm / 4111 mm �±20 mm / 5111 mm �±20 mm / 6111 mm �±20 mm
Height: 2950 mm �±20 mm
Above-ground height: 1100 mm �±20 mm
Under-ground part: 1350 mm �±20 mm
Width: 1550 mm 20 mm
Color-Paint: Yellow-Black (May be painted in different colors)
Collision Unit: Steel sheet and NPU NPI steel bar construction
Number of pistons: Double
Wall thickness (Top part): 10 mm
Wall thickness (front & side sheets): 6 mm
Surface coating: Electrostatic paint
Protection class: Sanding, primer surface paint
Operating Time: 8-10 seconds
Operating Capacity: 1000 times/day
Engine Power: 5.5 kw, 380 VAC, 3-Phase
Crash Level (Certified with crash test): IWA14-1 (PAS68, K12)-P1 crash rated
Operating Temperature: -25 / 50�°C
Operation Type: Hydraulic system
Automation: 220 V two-way solenoid valve
Hydraulic pressure: 80-120 Bars
Hydraulic tank: 40 Lt
CKM Defense Road Blocker
CKM Defense Hydraulic Road Blocker is the most widely used system in areas where entry and exit should be controlled and safe against all kinds of vehicle attacks, such as military facilities, government buildings, embassies, production facilities, oil refineries, hotels, airports, and stadiums.
The system is specifically designed against vehicle impacts, and its components have been reinforced to be effective in all possible attack scenarios.
Thanks to its hydraulic operating system, the CKM Defense Road Blocker System works continuously even in the busiest places.
This system synchronizes with other security systems such as swing barriers, rising bollards, etc., keeping the defense at the highest level in case of attack, while allowing authorized vehicles to safely enter the area. It can be integrated with all kinds of Access Control Systems such as Plate Recognition Systems, HGS (Electronic Toll Collection-Fast Pass) Systems, Card Readers.
TECHNICAL FEATURES
Unit operating voltage: 380 VAC, 3-Phase, 50/60 Hz
Length: 3111 mm, 4111 mm,5111 mm, 6111 mm �±20 mm
Height above ground: 780 mm �± 10 mm
The part buried under the ground: 1050 mm �±10 mm
Width: 1350 mm �± 10 mm
Color: Yellow Black Painted (RAL 1028, 9005)
Collision unit: Steel Sheet and NPU NPI steel bar construction
Wall thickness: 10 mm
Surface coating: Electrostatic painted
Corrosion coating: Shot blasting, epoxy under coating, electrostatic painted
Turn On/Off Time: 4-6 sec.
Emergency Take Off Feature: 2-3 sec. (optional)
Turn On/Off Capacity: 1000 / day
Power Engine: 4 kw or 5 kw , 380 V AC, 3-Phase
Operating temperature range: -25 / 60 C
Work System: Hydraulic system
Hydraulic piston: 2 qty
Hydraulic power unit: Industrial hydraulic pump, oil level and temperature gauge, manual hand pump
Automation routing: 220 V two way solenoid valve
Hydraulic pressure: 40-80 Bar
Hydraulic tank: 30-50 liter
Hydraulic hose: R2 3/8 330 Bar hose
Hydraulic oil: 46 no. hydraulic oil
Hydraulic system heating/cooling: Oil heater/cooler (optional)
Control Cabinet: Cabinet Dimension: 900 x 900 x 700 mm (height, length, depth)
Control System: Remote control,button control (optional), access systems (optional)
Control Panel: Compatible with PLC base control, micro process control card,
access systems devices (Access card, plate recognition system, finger print reader etc.)
Manual Usage: Manuel hand pump,
Warning Equipment: Warning light (optional), traffic lamp (optional), sound warning (optional)
Protection System: Loop detector, photocell (optional)
Drain pump: Optional concrete
Infrastructure: C 35 concrete
Power failure working status: Battery (optional)
Rising Bollards
CKM Defense RISING BOLLARD
CKM Defense High security automatic bollards are designed to prevent unauthorized vehicles access to secure areas and to provide the highest level of anti terrorism protection. This type of equipment is installed at areas of high risk sites of heavy vehicle attack such as military infrastructures, government institutions, or public places (stadiums, fairgrounds) etc. High security bollards are installed in either single or multiple units with an external hydraulic station and PLC, connected via the hydraulic hoses, besides the other type of our pneumatic air hoses. A separate push button control unit is supplied for manual control which is usually installed within the security office. This equipment can be easily integrated and interconnected with vehicle access control equipment such as arm barriers.
have been preferred by most of the Municipalities for their Pedestrianization projects.
CKM Defense Hydraulic & Pneumatic Rising Bollard has capability of working uninterruptedly for many years. It is being produced with stainless steel drawn steel pipes of European standards which has resistance to weather conditions and vehicle impacts. Those Rising Bollards prevent passage of unauthorized vehicles with it�¢??s strengthen internal structure.
Those Rising Bollards could be manufactured with variable diameters and heights regarding to necessity of security requirements of related perimeter.
Additionally, CKM Defense Hydraulic Rising Bollard have been preferred by most of the Municipalities for their Pedestrianization projects.
TECHNICAL FEATURES
Bollard Diameter: 220 - 273 mm
Bollard Height: 500 - 700 - 900 - 1100 mm
Wall Thickness: 8 - 16 mm
Moving Part: Powder Coating / 304-316 Stainless
Inner Sleeve: Hot-dip Galvanized
Movement Mechanism: Hydraulic & Pneumatic
Power Supply Three-Phase: 3ph AC 380V (�±10) 50/60Hz
Operating Speed: 4-6 sec.
Security Feature: Loop Sensor and Detection Systems
Operating Temperature -25 C / +60 C