1.Product introduction
Fluorinated ethylene propylene (FEP) micropowder is a kind of fluorinated polymer material with stable molecular structure which enable it many excellent properties: flame resistance, chemical corrosion resistance, well electric properties, excellent wear resistant and non-stick properties, temperature and weather resistance etc. It s good dispersion properties make it easy to be blended uniform. It could be widely used in various kinds of anti-erosion coating and paints, high building external coatings, hull, coil and highway facility coatings.
2.Technical Parameter
Item Value Test Method
Whiteness, % 90 GB/T 2913
Particle Size Mean Value D50, m 3.0~5.0 GB/T19077/ISO13320
TGA 150, 2h 0.30 150 ,Mass loss after 2 hours
Melting Point, 265 5 GB/T19466.3/ISO11357.3
3.Mark, Packing, Storage & Transportation
3.1 Mark
The packing bags (boxes) of this product should be clearly marked with firm company name, product name, batch number, brand number (specification number), net content, etc.
3.2 Package
This product is packed in paper barrels (lined with polyethylene plastic bags) with a net content of (20 0.2) kg per barrel. Each barrel shall be provided with a product certificate, including: company name, product name, batch number, brand (specification number), net content and production date, etc. In case of special packaging, the supplier and the demander shall negotiate separately.
3.3 Storage
This product should be stored in a clean, cool and dry place to prevent rain, sunshine, moisture, dust and other impurities.
3.4 Transportation
This product is transported according to non-dangerous goods. Moisture and severe vibration should be avoided during transportation.
1.Product Introduction
PTFE Micropowder is a kind of low molecular weight PTFE micropowder,which could be used to improve the heat resistance, slip, self cleaning and abrasion resistanceproperties.
Using special process to reduce it s molecular weight,and then refining the materials through particular technology, the particle size of PTFE Micropowder is around 3.0~5.0 m.
Due to it s particle combination, PTFE Micropowder are easy to incorporate and high efficient to many application.
2.Technical Parameter
Item Value Test Method
Whiteness, % 95 GB/T 2913
Particle Size Mean Value D50, m 3.0~5.0 GB/T19077/ISO13320
Maximum particle size, 28 GB/T19077/ISO13320
TGA, 150�¢, 2h 0.20 150,Mass loss after 2 hours
Melting Point, 3255 GB/T19466.3/ISO11357.3
3.Mark, Package, Storage & Transportation
3.1 Mark
The packing bags (boxes) of this product should be clearly marked with firm company name, product name, batch number, brand number (specification number), net content, etc.
3.2 Package
This product is packed in paper barrels (lined with polyethylene plastic bags) with a net content of (25 0.2) kg per barrel. Each barrel shall be provided with a product certificate,including:company name, product name, batch number, brand (specification number), net content and production date, etc. In case of special packaging, the supplier and the demander shall negotiate separately.
3.3 Storage
This product should be stored in a clean,cool and dry place to prevent rain, sunshine, moisture, dust and other impurities.
3.4 Transportation
This product is transported according to non-dangerous goods. Moisture and severe vibration should be avoided during transportation.
PTFE Dispersion JF-4DCD
1.Product Introduction
PTFE  dispersion  JF-4DCD  is  a  concentrated  dispersion  of  tetrafluoroethylene  polymerization  with  solid  content  of  about  60%  (WT).  It  will  provide  many  excellent  properties  to  the  products  such  as  anti-corrosion,  weather  and  friction resistance.
Recommended  for  (but  not  limited  to)  impregnation  of  glass  fiber,  asbestos  and  high-grade  non-stick  coatings.
2.Technical Parameter
Item Nominal Value
JF-4DCD
Appearance White or yellowish liquid
Solid content, % 60 ±2
Surfactant, % 4.0~7.0
PH 8~10
Viscosity, 10-3Pa ·s 20~40
3.Mark, Package, Storage & Transportation
3.1 Mark
There shall be firm and clear marks on the drums of this product, indicating company name, product name, batch number, brand number (specification number), net content, etc.
3.2 Package
The product shall be packed in a plastic drum with net weight of 1,250 kg per drum.
3.3 Storage
1.Store in a coolã??dryã??ventilated warehouse, keep the container airtight.
2.After three months, shaking the drum every week to avoid the deposition.
3.4 Transportation
Not classified as hazardous for transport. During transportation and storage, avoid heavy shaking, high temperature and below 0 .
1.Product� Introduction
PFA has excellent characteristics and good processability, and is widely used in lining equipment, pipeline valves, chemicals, wire and cable and medical supplies.
2.Technical Parameter
Items Test Method FJY-A03S FJY-A06S FJY-A15S FJY-A30S
Apprearance / Semi-transparent particies or white powder, no obvious impurities
MFR ASTM D1238 0.8~3.0 3.1~6.0 6.1~15.0 16~40.0
Standard Specific Gravity ASTM D792 2.12~2.17
Melting Peak Temperature
ASTM D3418 300~316
Tensile Strength
(Mpa) , ASTM D638 30 28 26 22
Elongation at Break
(%) , ASTM D638 300 300 300 300
Water Content,
(%) , HG/T 2902 0.2
3.Main Application
Application Representative Products Model Specification
Lining Container and Pipeline Lining Pump Valve Gasket welding material FJY-A03S, FJY-A06S
Pipe Hose, heat shrinkable rube, heat exchanger tube, level gauge tube FJY-A03S, FJY-A06S
Wire and Cable Insulation sheath for communication cables, electronic cables and other cables FJY-A15S, FJY-A30S
Electronic and Electrical Components Connectors, sockets, joints, chemical solvent bottles FJY-A03S,FJY-A06S,FJY-A30S
Thin Film and Sheet Sheet Lining, Electrical Insulation Tape, Deposition Film FJY-A03S,FJY-A06S
4.Attention
PFA is stable and non-volatile at normal ambient temperature, but it will decompose and release certain toxic gases when it is subjection to high temperature during forming process. Therefore, in the process of moulding, extrusion and injection moulding, it is need to ensure good ventilation.
In the process of processing, the decomposition gas of PFA may corrosion to the equipment, so it is necessary to avoid the long residence time of PFA in the equipment at high temperature.
5.Mark,Packing, Storage & Transportation
5.1 Mark
There shall be firm and clear marks on the drums of this product, indicating company name, product name, batch number, brand number (specification number), net content, etc.
5.2 Package
The product is packaged in polyethylene plastic bags and then packaged in cardboard boxes with a net weight of 25 kg per box.
5.3 Storage
It should stock in clean,cool,and dry warehouse,prevent from agglomeration and contamination.
5.4 Transportation
This product is non-toxic,non-explosive, non-corrosive, according to non-dangerous goods transport.
1.Product Introduction
PVDF resin has weather resistance, light retention, color retention, chemical corrosion resistance, excellent post-processing, high temperature resistance, high cost performance, easy maintenance and high decoration.
2.Technical Parameter
Item Test Method Unit Index
Apparent Density GB/T6373 g/ml 0.28~0.40
Water Content GB/T6284 % 0.2
Purity % 99.5
Scattered Fineness 30min) GB/T1724 m 30
Grinding Fineness(5min) GB/T1724 m 30
Stomer Viscosity GB/T9269 KU 70 ±10
Melting Point ASTM D3418 156~165
Thermal Decomposition TGA,1%wt.Loss Air 390
Melt Flow Rate ASTM Â D1238 230 10kg g/min 0~3.0
3.Mark, Package, Storage & Transportation
3.1 Mark
The packaging barrel of this product shall be provided with firm and clear identification, indicating the company name, product name, batch number, brand (specification number), net content, etc.
3.2 Package
The product is packed in paper drums (lined with double-layer polyethylene plastic bags), and the net content of each barrel is (25 ± 0.2) kg; Each barrel shall be provided with product certificate, including company name, product name, batch number, brand (specification number), net content, production date, etc. If special packaging is required, the supplier and the buyer shall negotiate separately.
3.3 Storage
This product should be stored in a clean, cool and dry place to prevent rain, sunlight, moisture, dust and other impurities.
3.4 Transportation
This product is transported as non dangerous goods. Avoid moisture and violent vibration during transportation.
4.Main Application
PVDF resin mixed with acrylic resin and additives can form baking PVDF fluorocarbon coating with superior performance. The coating can be used for aluminum workpieces and aluminum curtain walls, such as plates, profiles, window frames and door frames, with a service life of more than 20 years. The base material must be pretreated before coating. Generally, the construction process of two coating and one drying and three coating and one drying is adopted. It is applicable to the surface of aluminum substrate such as building curtain wall, doors and windows, ceiling, roof and shop facade.
ECTFE Water Film Grade Resin
1.Product� Introduction
The ECTFE water film grade resin is white powder, which has excellent chemical corrosion resistance, and the ph value range is 1-14.hollow fiber membranes can be prepared by the TIPS method for special occasions such as high-concentration wastewater, organic solvents and lye recovery, especially for the treatment of alkaline.
2.Technical Parameter
Item Test Method Unit Value
Density ASTM D792 g/cm3 1.66~1.68
Water Absorption ASTM D570 %
ECTFE Coating Grade Resin
1.Product introduction
As a resin, ethylene chlorotrifluoroethylene is a very pure fluorine copolymer, which not only has excellent mechanical properties, good weather resistance and chemical resistance common to fluorine-containing resins, but also has excellent light transmittance and hardly absorbs visible light and ultraviolet light. In addition, because it contains chlorine atoms, the moisture permeability of all fluorine resins is relatively low, which can prevent many liquids and gases from penetrating, and is beneficial to the anticorrosion and rust prevention of the protected substrate.
2.Technical Parameter
Item Test Method Unit Value
Density ASTM D792 g/cm3 1.66~1.68
Grain Size ASTM D1921 um 40~80
Melting Point ASTM D3418 �ºC 215~225
Melt Index ASTM D1238 g/10min (275�ºC,2.16kg) 8~15
3.Mark, Packing, Storage & Transportation
3.1 Mark
The packing bags (boxes) of this product should be clearly marked with firm company name, product name, batch number, brand number (specification number), net content, etc.
3.2 Package
This product is packed in paper barrels (lined with polyethylene plastic bags) with a net content of (20 �± 0.2) kg per barrel. Each barrel shall be provided with a product certificate, including: company name, product name, batch number, brand (specification number), net content and production date, etc. In case of special packaging, the supplier and the Demander shall negotiate separately.
3.3 Storage
This product should be stored in a clean, cool and dry place to prevent rain, sunshine, moisture, dust and other impurities.
3.4 Transportation
This product is transported according to non-dangerous goods. Moisture and severe vibration should be avoided during transportation.
4.Main Application
4.1 ECTFE coating grade resin is white powder, which has excellent chemical corrosion resistance, excellent barrier performance to various corrosive gases and excellent high and low temperature resistance.
4.2 The electrostatic spraying method can be used for coating protection of reactors, pipelines, storage and irrigation, mixers and other containers in the chemical and semiconductor fields, thus delaying the service life of the equipment.
