The wall mounted Lithium battery (LiFePO4 Battery) solutions are highly integrated, deep cycle backup power solutions for your solar home energy storage system. With rich experience and advanced techniques, the product has the features of the fashionable design, high energy, high power density,
long service life, and easiness of installation and expansion.
Custom capacity is acceptable.
High cycle life
4000 cycles @80% DoD for effectively lower total of ownership cost.
Longer service life
Low maintenance batteries with stable chemistry.
Built in circuit protection
Battery Management System (BMS) is incorporated against abuse.
Better storage
Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation.
Quickly recharge
Save time and increase productivity with less down time thanks to superior charge/discharge efficiency.
Extreme heat tolerance
Suitable for use in a wider range of applications where ambient temperature is unusually high:
up to +60C.
Lightweight
Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent.
Function
Support parallel operation
The wall mounted Lithium battery (LiFePO4 Battery) solutions are highly integrated, deep cycle backup power solutions for your solar home energy storage system. With rich experience and advanced techniques, the product has the features of the fashionable design, high energy, high power density,
long service life, and easiness of installation and expansion.
Custom capacity is acceptable.
High cycle life
4000 cycles @80% DoD for effectively lower total of ownership cost.
Longer service life
Low maintenance batteries with stable chemistry.
Built in circuit protection
Battery Management System (BMS) is incorporated against abuse.
Better storage
Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation.
Quickly recharge
Save time and increase productivity with less down time thanks to superior charge/discharge efficiency.
Extreme heat tolerance
Suitable for use in a wider range of applications where ambient temperature is unusually high:
up to +60C.
Lightweight
Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent.
Function
Support parallel operation
The 19 inches rack standard backup battery is based on Lithium iron phosphate battery, It has been designed to provide backup power for telecom equipment or energy storage system in household. It has excellent safety, high energy density, long lifetime, very nice temperature performance, green power newly of excellent safety and high reliability.
Custom capacity is acceptable.
High cycle life
4000 cycles @80% DoD for effectively lower total of ownership cost.
Longer service life
Low maintenance batteries with stable chemistry.
Built in circuit protection
Battery Management System (BMS) is incorporated against abuse.
Better storage
Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation.
Quickly recharge
Save time and increase productivity with less down time thanks to superior charge/discharge efficiency.
Extreme heat tolerance
Suitable for use in a wider range of applications where ambient temperature is unusually high:
up to +60C.
Lightweight
Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent.
Function
Support parallel operation
The 19 inches rack standard backup battery is based on Lithium iron phosphate battery, It has been designed to provide backup power for telecom equipment or energy storage system in household. It has excellent safety, high energy density, long lifetime, very nice temperature performance, green power newly of excellent safety and high reliability.
Custom capacity is acceptable.
High cycle life
4000 cycles @80% DoD for effectively lower total of ownership cost.
Longer service life
Low maintenance batteries with stable chemistry.
Built in circuit protection
Battery Management System (BMS) is incorporated against abuse.
Better storage
Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation.
Quickly recharge
Save time and increase productivity with less down time thanks to superior charge/discharge efficiency.
Extreme heat tolerance
Suitable for use in a wider range of applications where ambient temperature is unusually high:
up to +60C.
Lightweight
Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent.
Function
Support parallel operation
GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and
high security power services.
Safe and reliable
High quality li-ion cell for mobile use
Laser welding connection with high strength and low impedance
Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation
Damping pad design to improve the impact resistance of the system
IP54 safe and reliable operation in outdoor environment
Serially designed PCS and battery pack eliminates circulating current and improve system reliability.
Integrated BMS,DC, AC multi-layer protection, maximum safety performance design
Efficient and Convenient
Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion
Easy access to PV and diesel generator, intelligent muli-energy management.
Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring
Multi systems could be connected in parallel
Cost optimization
One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc.
Small size, light weight, less space and installation cost
Long cycle life, low failure rate, reduce operation and maintenance investment
Maximize green energy utilization.
Rated output power: 50KW
Rated energy: 75KWH
Rated power : 5KW
Pure sine wave solar inverter
Output power factor 1
Built-in 80A MPPT solar charger
Built-in anti-dust kit for harsh environment
Support parallel operation up to 3 units (available for 3KW-5.5KW 48V)
WIFI remote monitoring (optional)
Compatible to generator
Input Voltage 12V / 24V DC optional
Output Voltage 115V / 230V AC optional
Portable power for AC products, AC outlets for connecting multiple loads
High surge capacity for products that require more power to start
High efficiency converts virtually all of the battery's power to AC
Mounting brackets for convenient installation
Heavy duty stud-connection mounting
RS232 communication port
WIFI/BMS Optional
Overload and over temperature shut down
Low voltage and over voltage alarm/cut off
Input reverse protection
Short circuit protection
PI15 series is a pure sine wave inverter, high frequency machine solution, the product is small size, the solution is reliable and stable, the main function is to invert the DC 12VDC battery or 24VDC battery to AC 230VAC or AC 115VAC output, mainly used for emergency use Electricity, car inverter,
outdoor electricity and other occasions.
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and high security power services.
Safe and reliable
High quality li-ion cell for mobile use
Laser welding connection with high strength and low impedance
Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation
Damping pad design to improve the impact resistance of the system
IP54 safe and reliable operation in outdoor environment
Serially designed PCS and battery pack eliminates circulating current and improve system reliability.
Integrated BMS,DC, AC multi-layer protection, maximum safety performance design
Efficient and Convenient
Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion
Easy access to PV and diesel generator, intelligent muli-energy management.
Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring
Multi systems could be connected in parallel
Cost optimization
One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc.
Small size, light weight, less space and installation cost
Long cycle life, low failure rate, reduce operation and maintenance investment
Maximize green energy utilization.
Rated output power: 100KW
Rated energy: 150KWH
GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and high security power services.
Safe and reliable
High quality li-ion cell for mobile use
Laser welding connection with high strength and low impedance
Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation
Damping pad design to improve the impact resistance of the system
IP54 safe and reliable operation in outdoor environment
Serially designed PCS and battery pack eliminates circulating current and improve system reliability.
Integrated BMS,DC, AC multi-layer protection, maximum safety performance design
Efficient and Convenient
Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion
Easy access to PV and diesel generator, intelligent muli-energy management.
Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring
Multi systems could be connected in parallel
Cost optimization
One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc.
Small size, light weight, less space and installation cost
Long cycle life, low failure rate, reduce operation and maintenance investment
Maximize green energy utilization.
Rated output power: 150KW
Rated energy: 225KWH
On grid / Grid-tied
Rated power: 3600W
No. of MPPT: 2
Strings per MPPT: 1
Phase: Single phase
Warranty: 10 years
Dimension(W/H/D): 355*412*153mm
Net weight: 13.5kgs
LED display
On grid / Grid-tied
Rated power: 110KW
No. of MPPT: 10
Strings per MPPT: 2
Phase: Three phase
Dimension(W/H/D): 1050*660*330mm
Net weight: 98kgs
High Frequency On grid / Grid-tied
Rated power: 6000W
No. of MPPT: 2
Strings per MPPT: 1
Phase: Single phase
Warranty: 10 years
Dimension(W/H/D): 355*412*201mm
Net weight: 16.5kgs
LED display
The solar inverter takes full account of the needs of end customer, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 6000W
No. of MPPT: 2
Strings per MPPT: 1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 21kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 5000W
No. of MPPT: 2
Strings per MPPT: 1
Phase: single phase
Warranty: 10 years
Dimension(W/H/D): 355*412*173mm
Net weight: 14.5kgs
LED display
The solar inverter takes full account of the needs of end customer, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 5000W
No. of MPPT: 2
Strings per MPPT: 1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 21kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 4600W
No. of MPPT: 2
Strings per MPPT: 1
Phase: single phase
Warranty: 10 years
Dimension(W/H/D): 355*412*173mm
Net weight: 14.5kgs
LED display
The solar inverter takes full account of the needs of end customer, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 4200W
No. of MPPT: 2
Strings per MPPT: 1
Phase: single phase
Warranty: 10 years
Dimension(W/H/D): 355*412*153mm
Net weight: 13.5kgs
LED display
The solar inverter takes full account of the needs of end customer, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 3000W
No. of MPPT: 1
Strings per MPPT: 1
Phase: single phase
Warranty: 10 years
Dimension(W/H/D): 262*368*155mm
Net weight: 10kgs
LED display
The solar inverter takes full account of the needs of end customer, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 8000W
No. of MPPT: 2
Strings per MPPT: 1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 23.2kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 10000W
No. of MPPT: 2
Strings per MPPT: 1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 23.2kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 12000W
No. of MPPT: 2
Strings per MPPT: 2+1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 24.8kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 15000W
No. of MPPT: 2
Strings per MPPT: 2+1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 24.8kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
Off grid
Rated power: 1000W
Dimension(W/H/D): 225*355*92mm
Net weight: 5kgs
LCD display
This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Pure sine wave output
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Built-in MPPT solar charge controller
MAX PV Array Open Circuit Voltage: 450V
Can provide the power to the load without battery
Combining solar system, AC utility, and battery power source to supply
continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
Parallel operation with up to 3 units
WIFI remote monitoring (optional)
PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is
150~430Vdc, which Can help customers make full use of solar energy.
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Built-in MPPT solar charge controller
MAX PV Array Open Circuit Voltage: 450V
Can provide the power to the load without battery
Combining solar system, AC utility, and battery power source to supply
continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
Parallel operation with up to 3 units
WIFI remote monitoring (optional)
PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
Rated power : 3KW
Pure sine wave solar inverter
Output power factor 1
Built-in 80A MPPT solar charger
Built-in anti-dust kit for harsh environment
WIFI remote monitoring (optional)
Compatible to generator
PV1800 VHM is a multi-functional inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterruptible power
support in portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current,
AC/solar charger priority, and acceptable input voltage based on different applications.
Rated power: 1-5KW
Pure sine wave output
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Bult in MPPT 60A/80A solar charge controller
Combining solar system, AC utility, and battery power source to supply
continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
WIFI remote monitoring (optional)
Compatible to generator
This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Rated power: 1-5KW
Pure sine wave output
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Bult in MPPT 60A/80A solar charge controller
Combining solar system, AC utility, and battery power source to supply
continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
WIFI remote monitoring (optional)
Compatible to generator
Support parallel operation up to 3 units (available for 3KW-5KW 48V)
This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Power: 400Wp
Color: Full black
Cell Type: Mono 182x182mm Half-cut
Number of Cells: 108pcs (2x(6x9))
Dimension(L*W*H): 1722*1134*30mm
Weight: 20.5kg
Frame: Anodized Aluminum Alloy
Junction Box: IP68 rated
Cable, Length: 4mm2/300mm (length can be customized)
Packing: 36PCS/Pallet, 936PCS/40'HQ
Bifacial with dual glass
Power: 405Wp
Color: Full black
Cell Type: Mono 182x182mm Half-cut
Number of Cells: 108pcs (2x(6x9))
Dimension(L*W*H): 1722*1134*30mm
Weight: 24.5kg
Frame: Anodized Aluminum Alloy
Junction Box: IP68
Cable, Length: 4mm2/300mm (length can be customized)
Packing: 36PCS/Pallet, 936PCS/40'HQ
Power: 545Wp
Cell Type: Mono 182x182mm Half-cut
Number of Cells: 144pcs (2x(6x12))
Dimension(L*W*H): 2278*1134*35mm
Weight: 27kg
Frame: Anodized Aluminum Alloy
Junction Box: IP68 rated, with Bypass Diodes
Cable, Length: 4m/300mm (length can be customized)
Packing: 31PCS/Pallet, 620PCS/40'HQ
Power: 450Wp
Cell Type: Mono 182x182mm Half-cut
Number of Cells: 120pcs (2x(6x10))
Dimension(L*W*H): 1903*1134*30mm
Weight: 24.2kg
Frame: Anodized Aluminum Alloy
Junction Box: IP68 rated, with bypass diodes
Cable, Length: 4m/300mm (length can be customized)
Packing: 36PCS/Pallet, 864PCS/40'HQ
The HBP1800 series all-in-one energy storage solution, support 1KW 2KW 3KW output for different load appliances. It's based on the original cabinet design, stacked with solar energy storage lithium battery 960wh~3072wh, and built in battery protection system, fully retain the use of load power in applications of residential, school, commercial and public utility area.
Features higher capacities for greater compatibility with more power-hungry devices, and the latest in USB-C Power Delivery capable of charging larger USB devices like laptops.
Includes pre-installed solar charging optimization module that functions as a maximum power point tracker (MPPT), resulting in up to 40% faster charge times.
With LiFePO4 lithium cells, known for stability and safety, monitored by a state-of-the-art battery management system that prevents overcharge, over-current, and short circuiting.
Built in Multi safety protection that include short circuit, overload and over-temperture and error code reporting.
The HBP1800 series all-in-one energy storage solution, support 1KW 2KW 3KW output for different load appliances. It's based on the original cabinet design, stacked with solar energy storage lithium battery 960wh~3072wh, and built in battery protection system, fully retain the use of load power in applications of residential, school, commercial and public utility area.
Features higher capacities for greater compatibility with more power-hungry devices, and the latest in USB-C Power Delivery capable of charging larger USB devices like laptops.
Includes pre-installed solar charging optimization module that functions as a maximum power point tracker (MPPT), resulting in up to 40% faster charge times.
With LiFePO4 lithium cells, known for stability and safety, monitored by a state-of-the-art battery management system that prevents overcharge, over-current, and short circuiting.
Built in Multi safety protection that include short circuit, overload and over-temperture and error code reporting.
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging.
LCD display , easy to operate on LCD screen
Multi stage charging
(3-stage charging , parallel charging and equalized charging function)
BTS - Battery remote temperature sensor terminalEnable to charge Li-thium, Gel , lead-acid battery
With RS485 & USB communication port
Protection: PV array short circuit, PV reverse polarity, Battery reverse
polarity, Over charging, Output short circuit
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging.
LCD display , easy to operate on LCD screen
Multi stage charging
(3-stage charging , parallel charging and equalized charging function)
BTS - Battery remote temperature sensor terminal
Enable to charge Li-thium, Gel , lead-acid battery
With RS485 & USB communication port Protection: PV array short circuit, PV reverse polarity, Battery reverse
polarity, Over charging, Output short circuit
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, switch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, switch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2 'C output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0-10A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
