Product Description
Plastic Twine and rope filament extruding machine is automatic production line for PET, PP, HDPE, PA monofilament which is used to produce different kinds plastic rope and twine product.This unit can produce PET, PP, PE,PA monofilament automatically for plastic rope product. To make different raw materials plastic rope fiber, we have advanced and professional machine line design and technology support which is in leading position in this field. With recycled raw material, and less labor requirements, the production cost is cheap, so our clients will get good profit in the market.
Advantage
1. Most experienced manufacturer: Professional machine and mature technology with more than 20 years experience.
2. Green and Eco-friendly: 100% recycled PET flakes as the raw material for PET filament and can be recycled many times
3. Machine Development: Continuous improvement and feedback from Customers from more than twenty countries all around the world.
4. Better performance: low energy consumption, high production capability
5. Automatic Operation: Automatic and convenient operation with one or two workers
Technical Parameter
Model TPM-75 TPM-80 TPM-90
Screw L/D 30:1 30:1 30:1
Gearbox model 200 225 225
Main motor 18.5kw 22/30kw 30/37kw
Capacity(kg/h) 80-100kg 100-120kg 120-140kg
Mould Dia. 200 200 200
Filament Dia. 0.01-2.5mm 0.015-2.5mm 0.015-2.5mm
Machine List
1 SJ75/SJ80/SJ90 single screw extruder 1 set
2 Die head 1 set
3 Water-cooling tank 1 set
4 First tensile machine 1 set
5 Pre-heating machine 1 set
6 Second tensile machine 1set
7 Third tensile machine 1 set
8 Oil bath tank 1 set
9 Pneumatic tensioner 1 set
10 Two position winder 1 set
Electrical Configuration
1) Main motor frequency controller: ABB
2) Temperature controller: OMRON
3) AC contactor: SIEMENS
4) Thermal overload relay: SIEMENS
5) Breaker: CHINT or according to customer requirement
Product Description
Usual sheet width:
760, 840, 930, 1560mm
Usual sheet thickness:
1-3.5mm
Advantage:
1. No bad smell, fresher environmental conditions
2. Final product more transparent, good for sun light
3. Sheet production is very simple, no dust pollution
Machine List
Item Name
1 Conical twin screw extruder
2 Single screw extruder
3 Hopper type drying unit
4 Extruding mould and distributor
5 Two roller calender
6 Decking roof forming unit
7 Cutting unit
8 Stacker
9 ridge roof mould
10 oven
11 Compressing unit
12 Flat board haul off unit
13 Electrical unit
Technical Parameter
Structure Material Width Thickness ExtruderModel Designed Output
Single layer PVC 720mm-1560mm 1.0-3.5mm SJSZ-80/156 300-400kg/h
Double layers ASA/PMMA+PVC 1.2-3.5mm SJ-50/30+SJSZ-80/156 300-400kg/h
Triple layers ASA/PMMA+PVC
PVC 1.5-3.5mm SJ-50/30+SJSZ-65/132
+SJSZ-65/132 300-400kg/h
Triple layers PVC+PVC foamed+PVC 1.5-3.5mm SJSZ-51/105+SJSZ-65/132
+SJSZ-51/105 300-400kg/h
Fourlayers ASA/PMMA+PVC
+PVC foamed+PVC 1.8-3.5mm SJ-50/30+SJSZ-51/105+
SJSZ-80/156+SJSZ-51/105 300-450kg/h
Product Description
Raw materail: PVC+Other chemical
Product Introduction:
The PVC door and window profile production line can choose different specifications of conical twin-screw extruders according to different profile sections and molds, and configure the corresponding vacuum calibration table, tractor, cutting machine, stacker and other auxiliary equipment.
Technical Parameter:
Model TPM-180 TPM-300 TPM-600
Width 180 300 600
Model SJSZ-51/105 SJSZ-65/132 SJSZ-80/156
Capacity(kg/h) 180 250 350
Motor power(kw) 22 37 55
Total length(m) 18 22 26
Machine List
SJSZ Extruder
Mould
Vacuum calibration table
Haul off
Cutter
Stacker
COD HDPE cable communication protect pipe production line
Advantage
1. Easy operation;
2. stable running ,
3. high output , and very popular in home country and abroad.
Product Parameters
Model SJ-75(PE)
L/D 30:1
Pipe Diameter(mm) 50-200
Output(kg/h) 150-200
Production speed (m/min) 1.5
Main Parameters
Model SJ-65/33(PE) SJ-90/30(PE)
L/D 33:1 30/1
Pipe Diameter(mm) 16-32 32-63
Output(kg/h) 150 200
Production speed (m/min) 12-15 8-15
Power (kw) 37 50
The machinery electric parts details
ITEM
1 Motors
2 PLC (customized) SIEMENS 200 series
3 Interface module(customized) SIEMENS
4 Touch screen(customized) SIEMENS
5 Low voltage electrical SIEMENS&SCHNEIDER
6 Inverter ABB
7 Temperature control system OMRON
Product Description
Factory supply PE water pipe making machine is mainly used in the production of water supply and drainage pipes , which used for agriculture and construction , cable coating and other fields , the complete line is consisted of extruder , vacuum calibrator , hauling machine ,cutter and tipping rack , hauling machine unit has come ways of hauling , such as pillar type, three-claw type , four-claw type , six-claw type and so on . there are also knife-lifting cutter and planetary cutter with this extrusion line you can produce high quality water supply and gas supply pipes with excellent hardness and flexibility.
Feature
1.The machine adopts DC/AC motor, and Eurotherm DC/AC digital converter and high efficiency screw to ensure high efficiency extrusion.
2. This production line adapts basket type composite die head, which ensures not only the uniformity of high speed extrusion but also the stable performance of tubular goods.
3. This production line adopts high efficiency double chamber vacuum calibrating technology and spray cooling bath to improve the rate of finished products of tubular goods and meet the demand of high-speed production. The vacuum bath and cooling bath adopt stainless steel.
4. This production line adopts multi-caterpillar haul-off and ensures the synchronization.
5. The cutting machine adopts special saw blade with low noise, equipped with chip collector.
6. The whole line adopts PLC control system and large liquid crystal screen, which makes the operation very convenient.
Main Composition
Compulsory devices
1 Material charge 1 set
2 SJ single screw extruder 1 set
3 Pipe die head 16-1200mm, 1 set or several sets
4 Vacuum calibrating tank 1 set or several sets
5 Water spraying cooling tank 1 set or several sets
6 2-3-4-6-8-10-12 caterpillars hauling off machine 1 set
7 no dust-cutting machine or planetary cutting machine 1 set
8 Pipe stacker-4000-6000mm length 1 set
9 Electrical cabinet(ABB, Omron, RKC, neider etc) 1 set
10 Spare parts 1 set
Optional Devices
1 color mixer 1 set
2 Plastic crusher 1 set
3 Plastic shredding machine 1 set
4 Industrial water chiller 1 set
5 Air compressor 1 set
6 Thermocontroller for die head 1 set
7 Ink jet printer 1 set
Technical Parameters
Pipe Diameter 16-63 32-125 75-250 110-450 315-630 315-800
Extruder 65/33 75/33 90/33 120/30 120/33 150/33
Downstream LG63 LG125 LG250 LG450 LG630 LG800
Total power(kw) 70 150 230 380 550 800
PRODUCT INTRODUCTION
High-Speed Mixer is used in the material mixing, stirring, coloring and other process for plastic, rubber, daily chemical and other industries. It is the perferable equipment to produce plastic board, pipes, profiles and degradable plastics.
Features:
(1) Mixed materials are made by negative pressure mixed principle
(2) The electrical instruments are all well-known imported appliances with PLC
programmable control
(3) High degree of automation and speed mixing
(4) The blade was made by stainless steel pressure and passed the static and dynamic
balance test
(5) Especially the coolant blade ued abroad advaned spiral mixing structure, the whole
container has no dead angle, cooling speed and discharging clean.
(6) Large volume
Composition of Mixer
Name Quantity(set)
Motor 1
Pot cover 1
Inner container 1
Blades and deflectors 1
Air cylinder 1
Pneumatic control system 1
Motor 1
Inner container 1
Water-cooled blades 1
Electrical control cabinet 1
Operating platform 1
Technical Parameter
Feeding way Spiral feeder
Pot body material Stainless Steel
Unloading way Pneumatic discharge
Mixing time 10-12mins
Hot mixing power 55kw
Cooling mixing power 7.5kw
Pot cover material Cast aluminium
Blade material Stainless Steel
Company Profile
Plastic Machinery Company is a professional company specialize in designing and manufacturing plastic extrusion machine. We introduced and absorbed the advanced plastic processing technology, which can provide the technology and machinery one-step service.
Our company's main products are: PVC door and window profile production line, WPC wood-plastic profile production line, PVC wall panel production line, PVC/PE/PPR pipe production line, crust-foamed board production line, PE/PP/PC hollow sheet production line, PVC roof tile production line and PET packing belt production line, etc. According to customers' needs, to achieve diversified processing customization.
Product Description
Plastic safety net filament extruding machine line of our company is for producing high quality PE, PET monofilament for safety net, insect proof net, dust proof net, sun shade net products.
This production line designed by our company can produce high quality filaments to meet market requirements. Safety net filament machine is operated automatically from raw material feeding to final fiber winding. Due to high quality requirement of safety net fiber, we design the machine line by practice and final confirmation by clients worldwide. The machine line can produce different size and color fiber with good elasticity, good bending strength which assure best quality safety net.
Features
1. Most experienced manufacturer: Professional and mature technology
2. Machine Development: Improvement and feedback from Customers all around and the world
3. Multifunction: multi-purpose machine of filament for broom, rope, nets, etc
4. Better performance: low energy consumption, high production capability
5. Operation: Easy and convenient operation saves labors
6. Top grade synthetic eyelash filament assurance
7. Reasonable machine design to save running cost
8. Advanced production process support to assure qualified fiber
9. Easy operation of complete production line
10. Complete service system from beginning to final production
11. Successful client production line plant case with good reputation
Technical Parameter
Model TPM-75 TPM-80 TPM-90
Screw L/D 30:1 30:1 30:1
Gearbox model 200 200 200
Main motor 22kw 22/30kw 30/37kw
Capacity (kgs/h)50-85kgs 70-120kgs 120-140kgs
Mould Dia. 200 200 200
Filament Dia. 0.14-0.4mm 0.14-0.4mm 0.14-0.4mm
Machine Line General Configuration List
No. Machine Name
1 Single screw extruder
2 Die head + spinnerets
3 Water trough calibration system
4 Tensile unit
5 Hot water tank
6 Tensile unit
7 Hot water tank
8 Tensile unit
9 Winding machine
Inverter:ABB
Temperature controller: Omron
Main auto-breaker: Scneider
AC Contactor: Siemens
Company Profile
Plastic Machinery Company is a professional company specialize in designing and manufacturing plastic extrusion machine. We introduced and absorbed the advanced plastic processing technology, which can provide the technology and machinery one-step service.
Our company's main products are: PVC door and window profile production line, WPC wood-plastic profile production line, PVC wall panel production line, PVC/PE/PPR pipe production line, crust-foamed board production line, PE/PP/PC hollow sheet production line, PVC roof tile production line and PET packing belt production line, etc. According to customers' needs, to achieve diversified processing customization.
Product Description
Usual sheet width:
880mm, 1050mm
Usual sheet thickness:
2.5mm, 2.8mm, 3.0mm
Feature:
1. Optional to adopt conical twin screw extruder and parallel twin screw extruder
2. Supply formula guide and staple raw material purchase
3. Professional analyzing and design by considering production cost and tile's performance
Technical Parameter
Central height: 1000mm
Max. Haul-off speed: 4m/min
Operation direction: From right to left (face to the operation panel)
Machine color: Blue or as per your request
Description final product & Output capacity: Single layers UPVC Roofing tile;
Width:880 or 1040mm,Thickness: 1~4.0mm;
Wave distance:180mm; Wave height:30mm;
Output:250-400kg/h(Depending on CaCO3 proportion)
Machine List
1 Conical twin screw extruder SJSZ-80
2 Single screw extruder SJ-45X30
3 Hopper type drying unit STG-25
4 Extruding mould and distributor PM1200
5 Two roller calender YH-1200
6 Decking roof forming unit ZSW-1050
7 Cutting unit QG-1100
8 Stacker LJ-6000
9 ridge roof mould One unit
10 oven One set
11 Compressing unit One set
12 Flat board haul off unit One set
13 Electrical unit 1 unit
Product Description
Used for:
PE WPC DECKING,FENCING,WALL CLADDING,BENCHES,PERGOLA,BEAM
Raw material:
100%Recycled PE granules(30%)+Wood Powder(65%)+chemical(5%)
This WPC machine is used for making WPC profiles by Wood and Plastic composition, such as WPC decking, WPC wall cladding, WPC fencing, WPC pergola, WPC post, etc.
PP/PE WPC profile production line can continuously produce PP/PE WPC profile.
The WPC profile adopts two-step production process.The first step is using WPC granulating machine to make WPC pellets from recycled PP/PE material,wood powder and chemical additives.The max wood percentage can be 65%.The the WPC profile extrusion line will make the WPC pellets into WPC profiles by equip customized mold.We can equip on-line embossing machine to achieve 3D wooden pattern.
The profile produced by this production line can be sanded and brushed by sanding machine and brushing machine.
Production Steps
1)For Pelletizing Production Line
Model L/D ratio Max.capacity Motor power Material
SHJ-65 40:1 200-220kg/h 75kw PE+wood powder
SHJ-75 40:1 300-350kg/h 90kw PE+wood powder
2)For Profile Production Line
Model TPM-65 TPM-80
Extruder model SJSZ-65/132 SJSZ- 80/156
Motor power 37kw 75kw
Mac.Extrusion capacity 140-160kg/h 220-250kg/h
Co-extruder(Optional) SJ35/28 SJ45/28
Main Production Line
1.SRL 500 Mixer
2.PE-WPC Pelletizing Production line
1)SHJ65/40 Parallel Twin Screw Extruder
2)SWP-380 Crusher
3)Three Stages Wind Cooling&Conveying System
3.PE-WPC Profile Production LIne
1)SJSZ65/132 Conical Twin Screw Extruder
2)Mould
3)Calibration Table
4)Cutting Machine
5)Stacker
4.Sanding Machine
5.Embossing Machine
6.Brushing Machine
Product Description
Raw Material
1. can be virgin plastic material. PP, PS, ABS, HIPS, PLA
2. can be recyclable material, like PP, PS granules flakes
Sheet Specification
Usual Sheet Width: 700, 900, 1020, 1200, 1300, 1400, 1500, 1700, 1800, 2100, 2200mm
Usual Sheet Thickness: 0.5-2mm, 1.5-10mm, 6-20mm, 3-30mm
PP Board: Widely used in chemical industry, food industry, anticorrosive, purification industry, environmental protection equipment manufacturing industry, etc.
PE Board: Widely used in chemical industry, electric power and other industries. HDPE board can also be used as engineering plastics used in machinery, chemical equipment, etc.
ABS Board: Widely used in home appliances, electronics, packaging, medical equipment and other fields.
Machine List
Name Quantity(set)
Automatic drying feeder 1
Single screw extruder 1
Extruding mould 1
Three roll calender 1
Die heater 1
Cooling bracket 1
Edge trimming machine 1
Haul off 1
Sheet shares 1
Stacker 1
Crusher 1
Product Parameters
Type TPM-150 TPM-170 TPM-180
Raw Material PP,PE,ABS,PC PP,PE,ABS,PC PP,PE,ABS,PC
Width 1220-1500mm 1200-1500mm 1500-2000mm
Thickness 3-30mm 3-30mm 3-30mm
Extruder Type SJ150x35 SJ170x35 SJ180x35
Outout 500kg/h 700Kg/h 800kg
Product Description
SPC flooring stands for Stone Plastic Composite. The main component is lime stone (calcium carbonate)+ PVC Powder + Stabilizer. Different from regular vinyl floor, there is no plasticiser inside, so it is more environmentally friendly. SPC flooring mainly structured with the UV Coating , abrasion resistant paper ,decorative paper film and core board. Meanwhile IXPE& CORK option available for high end usage.
Process
Mixer (mixing the main materials and additives) SJSZ 80/156 conical double Screws Extruder Mould Lamination unit Three-calender unit Cooling Bracket Hual-off Machine Edge Cutting Cutter Stacker UV coating machine
Machine List
Raw materials Mixing system
1. Spiral Loader 1 set
2. High speed Heating cooling Mixer unit 1 set
PVC imitation marble sheet extrusion line
1. Spring Loader 1 set
2. Conical double screw Extruder 1 set
3. Mold/Die head set 1 set
4. Three-roller calander with film hot-stamping device 1 set
5. Cooling frame with side cutting 1 set
6. Haul off unit 1 set
7. Cutting machine 1 set
8. Discharging stacker 1 set
Product Description
SPC flooring stands for Stone Plastic Composite. The main component is lime stone (calcium carbonate)+ PVC Powder + Stabilizer. Different from regular vinyl floor, there is no plasticiser inside, so it is more environmentally friendly. SPC flooring mainly structured with the UV Coating , abrasion resistant paper ,decorative paper film and core board. Meanwhile IXPE& CORK option available for high end usage.
Process
Mixer (mixing the main materials and additives) SJSZ 80/156 conical double Screws Extruder Mould Lamination unit Three-calender unit Cooling Bracket Hual-off Machine Edge Cutting Cutter Stacker UV coating machine
Machine List
Raw materials Mixing system
1. Spiral Loader 1 set
2. High speed Heating cooling Mixer unit 1 set
PVC imitation marble sheet extrusion line
1. Spring Loader 1 set
2. Conical double screw Extruder 1 set
3. Mold/Die head set 1 set
4. Three-roller calander with film hot-stamping device 1 set
5. Cooling frame with side cutting 1 set
6. Haul off unit 1 set
7. Cutting machine 1 set
8. Discharging stacker 1 set
The us is self cleaning and enables excellent surface ratio. The bio-film carrier elements are produced from a material and with a procedure that provided properly stored and used ensures a minimum aging time of 20 years. Our can also be used as packing media for water coolers, oil water separators, and de-nitrification systems for polluted fish farms. Due to the use of the biological treatments get highly effective.
Advantage
Rapid carrier bio film formation mechanism
Super decarburization, ammonia nitrogen removal capacity
Excellent resistance to shock load performance
Flexible way of engineering application
Simple operation and maintenance
Long service life-100% virgin HDPE material.
Deoxidation and phosphorus removal effect is good
Application
The Sewage plant upgrade project , improve the standard and quantity
New sewage treatment project of and Biological Aerated Filter process
Biochemical treatment of reclaimed water
River regulation denitrification and phosphorus removal
Aquaculture in addition to ammonia nitrogen, water purification
Biological filter media is used for biological deodorization tower
Machine List
No Machine Name Quantity
1 Vacuum Loader 1set
2 Hopper dyrer 1set
3 GB-SJ65/28 Single Screw Extruder 1set
4 PE MBBR pipe moulds 1set
5 Vacuum cooling tank 1set
6 Water cooling trough 1set
7 Haul off machine 1set
8 Flying cutting machine 1set
9 Storage silo 1set
Product Introduction
Mpp pipe is a special polyethylene as the raw material through the plastic extruder extrusion molding, applied to the urban water supply network, irrigation diversion works and agricultural irrigation works, especially suitable for acid and alkali resistance,
corrosion resistance of the environment of plastic pipe.PE pipe adopts hot-melt and electric hot-melt connection to realize the integration of interface and pipe material, and can effectively resist the annular stress and axial impact stress generated by pressure, and PE pipe does not add heavy metal salt stabilizer, the material is non-toxic, does not scale, does not breed bacteria, and avoids the secondary pollution of drinking water.
Features
1. High speed extrusion, large output, low energy consumption per unit product.
2. Realize the technology of 1-5 layers co-extrusion and one die overshooting
3. Design of spiral structure mold, special internal cooling system of pipe, high speed shaping cooling
4. Professional barrier screw and new concept mixing section design, plasticizing mixing effect is good, ensure efficient and stable extrusion
Technical parameter
Machine Type Pipe Diameter Main motor power
SJ-65/33 16mm-63mm 55kw
SJ-75/33 50mm-250mm 110kw
SJ-90/33 110mm-315mm 160kw
Product Description
It can be used in many aspects, especially in various flat forming conversions of thermoplastics, such as PP, HDPE, and LDPE etc. It is mainly used for woven bag, jumbo bag, the sun-shade net etc.
This line has the performance of high speed, high production, low energy consumption, good forming quality of the bobbin.
The structure of this line is compact with a pleasing appearance,smooth running, flexible and reliable control excellent manufacturing technics, convenient and safe operation.
Features of Machine:
Most experienced manufacturer: Professional machine and mature technology with more than 20 years experience.
Green and economic: 100% recycled PET water bottle flakes or recycled PP resin as raw material to make qualified plastic filament yarn for various usage such as cleaning broom, brush, and packing rope.
Machine Development: Continuous improvement and feedback from customers from more than fifty countries all around the world.
Better performance: low energy consumption, high production capability
Easy Operation: Automatic and convenient operation with one worker
Technical Parameters
Model TPM-65 TPM-80 TPM-90
Die width 600mm 800mm 1000mm
Screw diameter 65mm 80mm 90mm
Stretch Ratio 1:8 1:8 1:8
Size 24 32.5m 263 2.5m 28 32.5m
Total power 60KW 80KW 100KW
weight 3T 3.5T 4T
Machine list
No Description Quantity
1 Dehumidifying and Crystallizing Equipment 1 set
2 SJ-75/33 Single Screw Extruder 1 set
3 Automatic Screen Changer 1 set
4 Mold 1 set
5 Water Tank Cooling System 1 set
6 The first seven haul off machine 1 set
7 Water heating oven 1 set
8 the secend seven haul off machine 1 set
9 Glazing machine 1 set
10 Air oven 1 set
11 the third seven rollers haul off machine 1 set
12 winding machine 1 set
13 shaping machine 1 set
14 cutting machine 1 set
15 packaing machine 1 se
Product Introduction
Polypropylene corrugated board (PP corrugated board) is one of the packaging material which is most flexibility and widely used.
The main component of the PP corrugated board is polypropylene, which is a highly pure hydrocarbon, non-toxic, anti-chemical, combustible, no hazardous substances and environment friendly.
Our own PP hollow board production line for providing the best packaging solution according to different situations.
The material of the PP corrugated sheet can be divided into 3 types (recycled, mixed and 100% virgin material) according to the ratio of the material. They can be differentiates by comparing their smoothness, brightness of color and hardness. The 100% virgin material is the best of smoothness, brightness of color and hardness, then mixed, last the recycled.
Application
PC hollow sheet is widely used in construction sunroof in buildings/halls/shopping center/stadium/public places of entertainment and public facility; Ring shield of bus station/garages/pergolas/corridors; noise barriers for highways and urban elevated road.
Machine List
NO Equipment
1 Single Screw Extruder
2 Screen Changers
3 Mould
4 Vaccum Sizing Cooling Platform
5 Edge Cutting Device
6 The First Tractor
7 Infrared Alignment Oven
8 Powerful Forced-air Cooling Device
9 The Second Tractor
10 The Cutter
11 The Stacker
12 Electric Control System
Technical Parameter
PP/PE Hollow Sheet PC Hollow Sheet
Extruder model SJ-120,SJ-100 Extruder model SJ-120, SJ-45
Sheet width 2100mm, 1220mm Sheet width 2100mm
Sheet thickness 2-8mm, 2-8mm Sheet thickness 4-40mm
Max capacity 350kg/h,200kg/h Max capacity 450kg/h
Main motor power 132kw Main motor power 132kw
Product Description
PVC profile production line is composed of cone twin screw extruder, vacuum calibration tank, haul-off, cutter, stacker, and also coordinated with different profile break-section and mould to produce PVC door&window profile,indoor floor, decoration plate material, profile and multi-hole wire plastic products etc.
This extrusion line also can be used to produce wpc profile extrusion line WPC Machine can be used after recycling, and has been widely used in fields of floor, guard bar, tray, packing cases, partition board, window and door sheath, skirting line, etc.
Configuration
Mixer
�· Mixing PVC powder, CACO3 and other addictives.
�· Widely used in PVC pipe and profile production.
�· Composed of high speed mixer (hot mixer), cooling mixer and control cabinet.
�· Stainless steel SUS304 for the internal wall construction. It will guarantee the mixer could use for long time under the high friction.
�· The mixing blades are passed the static and dynamic balance testing. And the main shaft adopts fine sealing to prevent material leakage.
Extruder
Different models for options: SJSZ51/105, SJSZ65/132.
High quality electrical components, like Siemens, Omron, Fuji, Delta, etc.
Alloy screw & barrel, which guarantee high quality and stable output.
Equipped with high qualty gearbox and distributor.
Extruder control by PLC screen touch is available as well; PLC screen touch is from Siemens (customized).
Vacuum calibration table
Include full set of vacuum and water pump
Width: 240mm
Length: 6000mm
Independent operation panel for easy operation
Haul off
speed control by inverter
Fast change type pads for easy operation
Install plate is adopts aluminum material
Cutter
Lifting saw cutter with adopts double station dust collection system
Synchronous drivingby air cylinder or servo motor control
stacker
Stainless steel304 as touching material
Discharge driving by air cylinder
Technical Parameter
Model SJSZ-51/105 SJSZ-65/132
Total installation power(kw) 130 155
Transformer (kw) 100 100
Actual electricity consumption(kw) 50 50
Output (kg\h) 120-140 240
Line speed (m\min) 1-3 1-3
Motor power(kw) 22 37
UPVC/PVC/WPC/ Ceiling/Wall Panel Twin Extruder Production Line
Packing and delivery
UPVC/PVC/WPC/ Ceiling/Wall Panel Twin Extruder Production Line
PVC pipe extrusion machine has features of low energy consumption, high output, stable running etc.
The standard PVC pipe extrusion machine include: material feeder, SJSZ series conic twin screw extruder, mould, vacuum calibration tank, spray cooling tank, haul-off, cutter, stacker.
It is mainly used in producing various diameters and wall-thickness of PVC pipes for agriculture and constructional plumbing, electrical conduit etc.
Production Flow:
Material Heating Cooling Mixer Material Feeding Conical Twin Screw Extruder Extrusion Mould & calibrator vacuum Calibration Cooling Tank (Spray Cooling Tank) Printer Haul-off Unit cutter stacker
Machine List
Extruder
Mould
Vacuum spraying water tank
Haul off machine
Cutter
Stacker
Product Description
Usual sheet width:
915, 1200, 1560, 1830mm
Usual sheet thickness:
4-20mm
Application of Boards:
1. Architecture decoration industry
Building formwork board, outdoor board, indoor decoration board, residential house board, office board, separation wall of public building, commercial decoration frame, board used in dust-free room, etc.
2. Household decoration
Bathroom cabinet board, kitchen cabinet board, furniture board, home decoration board, various household shelves, etc.
3. Advertisement industry
Screen printing, computer engraving, advertisement board, exhibition plate, logo plate, etc.
4. Transportation industry
Ship, plane, bus, and train, floor covering, core layer, indoors decoration plate, etc.
5. Industrial application
Suitable for rot-proof project in chemical industry, thermal forming, refrigeration warehouse, etc.
Technical Parameter
Model TPM-915 TPM-1220 TPM-1560 TPM-1830
Width 915mm 1220mm 1560mm 1830mm
Thickness 3-20mm 3-20mm 3-25mm 3-25mm
Extruder SJSZ80/156 SJSZ80/156 SJSZ80/173 SJSZ92/188
Motor power 75KW 75KW 110KW 132KW
Capacity 350Kg 35oKg 500-600Kg 500-600Kg
Machine List
SJSZ Series Extruder
Mould
Calibration Table
Cooling Roller Bracket
Haul Off
Cutter
Stacker
