SPU: PSV313
Trade name: OBD 2 car read code card + battery tester battery detector two in one. Bluetooth APP dual-mode operation. Factory Direct Selling (V313 is a multi-function code reading card that integrates OBD general detection, battery detection and printing. It provides accurate vehicle detection, battery detection, and multi-function code reading of the print card test results)
technical parameter
Main control chip: STM32F103VET6
Operating voltage: 12V
Operating current: 98 mA
Operating environment: -20 70
Storage temperature: -25 80â??
Overall dimension: 181.5 * 81 * 29mm
Packaging size: 130 * 64 * 285mm
Product weight: 168g
With packaging: 704G
Quantity quantity: 20 pcs
product description
1. 9 standard protocols supporting OBD II / EOBD
2. Support OBD functions such as vehicle-fault diagnosis and real-time data flow
3. It has the function of viewing and saving the fault code information, data flow, battery detection and other data playback functions
4. With emission test data, data storage and playback
5. The data saved in the code read card can be printed through the USB serial port
6. Support for USB upgrade function, upgrade / print
7. Supports 6 languages: German, English, Spanish, French, Italian, and Dutch
8. Quickly test the cold start current, internal resistance, battery life and remaining power of 12V start lead acid battery to determine whether the battery needs to be replaced: real-time voltage detection, battery impedance detection (SOC) battery charging current value (SOH), cold start current detection (CCA)
9. Communication mode, OBD interface
10.CE/FCC/ROHS/UKCA Certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Vehicle data:
1. Read the error diagnostic code
2. Clear fault code (clear error code and close MIL)
3. Engine RPM per minute (RPM)
4. Calculate the load value
5. Coolant temperature
6. Fuel oil system status
7. Speed
8. Short-term fuel status
9. Long-term fuel conditions
10. Intake-air manifold pressure
11. Early fuel injection time
12. The inlet temperature
13. Air flow velocity
14. Absolute position of the throttle valve
15. Oxygen detection voltage associated with the short-term fuel status
16. Fuel oil system status
17. Fuel oil pressure
18. Fuel consumption monitoring, etc.
Note: The number of data items supported by different model years also varies, and the actual support situation shall prevail.
Reference Price (FOB)
1. Single piece Price, USD147.10
2.50set, USD88.24
3.100set, USD79.42
4.150set, USD71.48
5.200set, USD64.33
6.250set, USD57.90
SPUï¼?PSV08
Trade name:Intelligent master control 25K80 chip, obd diagnostic instrument, Bluetooth dual-mode ELM327, OBD 2 vehicle fault detector, elm327 factory direct sales. (FOR Android: torque, OBD Home FOR Apple: car scanner, OBD Auto Doctor, OBD Home)
technical parameter
Connection mode: Bluetooth 4.0
Main control chip: 25K80
Support system: iOS / Android / Windows
Operating voltage: 9V 16V
Operating current: 35mA
Operating temperature: -40â?? 85â??
Product size: 41.8*31.7*19.7mm
Package size: 100*63*25.5mm
Product weight: 35.5g
Quantity quantity: 100 pcs
product description
1. Diagnosis of the automobile engine system
2. Engine fault lamp clearance
3. Automotive data flow
4. Regular OBD functions can be realized
5. Recommended APP FOR Android: torque, OBD Home FOR Apple: car scanner, OBD Auto Doctor, OBD Home
6. Small size, high chip integration degree, with independent appearance patent, utility model patent and software copyright passed
7, CE, FCC and RoHS certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
SPU PSB02
Trade name: Intelligent master 25K80 chip, elm327 automotive diagnostic instrument, engine fault detector, obd 2 Bluetooth reading code card, automotive diagnostic tool factory direct sales. (FOR Android: torque, OBD Home)
technical parameter
Connection mode: Bluetooth 2.0
Main control chip: 25K80
Support system: Android / Windows
Operating voltage: 9V 16V
Operating current: 35mA
Operating temperature: -40 85
Product size: 43 * 25 * 30mm
Package size: 100*63*25.5mm
Product weight: 34g
Quantity: 100 pcs
product description
1: Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
2: Clear trouble codes and turn off the MIL ( Check Engine light)
3: Display current sensor data, including:
4: Engine RPM
5: Calculated Load Value
6: Coolant Temperature
7: Fuel System Status
8: Vehicle Speed
9: Short Term Fuel Trim
10: Long Term Fuel Trim
11: Intake Manifold Pressure
12: Timing Advance
13: Intake Air Temperature
14: Air Flow Rate
15: Absolute Throttle Position
16: Oxygen sensor voltages / associated short term fuel trims
17: Fuel System status
18: Fuel Pressure
19: Many others
20. Small size, high chip integration degree, with independent appearance patent, utility model patent and software copyright passed
21. CE, FCC and RoHS certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Automotive diagnostic tool WiFi Elm327
OBD car scanner fault repair decoder
ECU card reader car diagnostic scanner
OBD car scanner, diesel vehicle diagnostic tool
Auto Repair OBD 2 scanner
Vehicle fault analyzer diesel vehicle OBD scanning tool
ECU reader OBD Key Programmer
OBD Car scanner OBD, adapter
OBD II Diagnostic system OBD reader
Motorcycle diagnostic scanner
PSA0017.MINI ELM327 V1.5 Bluetooth OBD2 Bluetooth 2.0 Car Diagnostics with switch. ELM327 supports torque software for Android system mobile phone, OBD range software for Symbian system mobile phone, PPC (window mobile) system mobile phone, scanning master-ELM for PC, etc.
Functions:
1.Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning
2.Clear trouble codes and turn off the MIL ( "Check Engine" light)
3.Display current sensor data, including:
4.Engine RPM
5.Calculated Load Value
6.Coolant Temperature
7.Fuel System Status
8.Vehicle Speed
9.Short Term Fuel Trim
10.Long Term Fuel Trim
11.Intake Manifold Pressure
12.Timing Advance
13.Intake Air Temperature
14.Air Flow Rate
15.Absolute Throttle Position
16.Oxygen sensor voltages / associated short term fuel trims
17.Fuel System status
18.Fuel Pressure
19.Many others ...
Software Included:
Scantool_net113win (Full Version)
EasyOBDII V2.2 (Full Version)
OBD2Spy (Demo Version)
ScanMaster-ELM (Demo Version)
wOBDCRAZY (Demo Version)
TORQUE (Android system cell phone)
OBDscope software (Symbian system cell phone)
This hardware can match many other software still! But most are not free
Features:
OBD SCAN is the newly developed wireless scan tool
1ï¼?SAE J1850 PWM (41.6 Kbaud)
2ï¼?SAE J1850 VPW (10.4 Kbaud)
3ï¼?ISO 9141-2 (5 baud init, 10.4 Kbaud)
4ï¼?ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5ï¼?ISO14230-4 KWP (fast init, 10.4 Kbaud)
6ï¼?ISO15765-4 CAN (11bit ID, 500 Kbaud)
7ï¼?ISO15765-4 CAN (29bit ID, 500 Kbaud)
8ï¼?ISO15765-4 CAN (11bit ID, 250 Kbaud)
9ï¼?ISO15765-4 CAN (29bit ID, 250 Kbaud).
Default Settings (User Adjustable):
1.Works with all OBD-II compliant vehicles
2.Wireless (Bluetooth) 5 ~ 10 meter
3.Software included for Palm, PDA, Mobile
4.Software included for Windows PC
5.Software included for Windows Smartphone.
Step Price (FOB):
1. Sample unit price USD15.40,
2.â?¥1000set, USD9.20,
3.â?¥2000set, USD8.30,
4.â?¥3000set, USD7.50,
5.â?¥4000set, USD6.80.
Remarks: Free shipping for sample unit price.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
PSL120S. Floor-type 3-phase 5-line DC ev charger. Suitable for US, EU, JP, UK and other international electrical standards 380V 15%, 120KW commercial type 2 electric vehicle intelligent charging station.
technical parameter:
Input rating: 380V 15%;
Rated power: 120KW;
Output voltage range: 150-1000VDC;
Output current range: 0-250A;
Connector type: NEMA 6-20P / 5-15P, NEMA 6-50P / 14-50P;
Support communication: APP, RFID Card, Button;
External Communication 3G\4G LAN(RJ-45) and WIFI
Connector: 2 sets;
Cable length: random standard with 5m. Support to purchase 10m, 15m;
Operating temperature: -25 C~ + 50 C;
Operating humidity: 5%~98%;
Key surface index: charging time, real-time current / voltage / power supply / connection / charging / fault; 7-inch highlight color LCD screen;
Working life of connector machinery: 10000 times (no-load plugging);
Quality assurance: 12 months;
Waterproof grade: IP54;
Product certification: 3C, CE, ROHS, REACH, cULus.
Commodity features:
Smart charger product 3-phase; DC 380V 15%; DC / ac smart charger covers byd, nio, xping, ideal car, aion, ZEEKR, audi, BMW, Chevrolet, Mercedes, porsche, Volkswagen, Volvo, Tesla, Citroen, fish, ford, mitsubishi, nissan, Peugeot, Renault, Smith, tower, Toyota, Honda, prius, chery, walker most countries such as electric car market family (residential) and commercial purposes;
Safety design / multiple protection: underpower protection, overvoltage protection, overload protection, overcurrent protection, overwet protection, leakage protection, grounding protection, lightning protection, electrostatic protection, flame retardant protection;
Waterproof grade: IP54;
Noise control: 60dB;
Human-machine interface: 7-inch LCD color display screen touch screen, LED indicator light;
OLED screen: display the charging current, voltage, output energy, charging time, status information, fault information, etc.;
Body materials: metal;
Quality assurance: 12 months;
Device selection: support OEM customization.
Step Price (FOB):
1. Sample unit price,USD36750.00
2.200set, USD22050.00
3.400set, USD19845.00
4.600set, USD17860.50
5.800set, USD16074.50
SPU PSV318
Trade name: Battery detection, elm327 automotive diagnostic instrument, engine fault detector, obd 2 Bluetooth reading code card, automotive diagnostic tool factory direct sales. (OBD interface)
technical parameter
Storage temperature: -30 70
Operating voltage: DC12V
Operating current: 59 mA
Product size: 130 * 70 * 25mm
Packing size: 160 * 70 * 60mm
Product weight: 144g (including color box 198g)
Quantity quantity 70 pcs
Outer box size: 54*42*23.5cm
product description
1. Color screen shows 1.8 inches
2.CE / FCC / ROHS / UKCA certification
2. Quickly read the car engine fault
3. Remove the engine fault lamp
4. View the frozen frame data
5.I / M Ready Status
6. Check the frame number
7. Read the car data streams
8. Real-time curve graph
9. Oxygen sensor test
10. Fuel evaporation control system
11. Support for 10 languages: German, Dutch, English, Spanish, French, Italian, Russian, Chinese, Japanese, and Korean
12. Communication mode, OBD interface
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Reference Price (FOB)
1. Single product price, USD41.20
2.50set, USD24.71
3.100set, USD22.24
4.150set, USD20.00
5.â?¥200set, USD18.00
6.250set, USD16.22
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU: PSBT201
Trade name: PSBT201.Automobile battery diagnostic instrument, 12V general battery diagnosis, multi-functional battery diagnostic instrument, battery diagnostic instrument factory direct sales
technical parameter
Operating voltage: 9-18V
Operating temperature: -20 60
Storage temperature: -20 70
Interface type: a pair of reverse black and red crocodile clips with a length of 1 meter
Product size: 128.5x72.5x22.2mm
Packaging size: 200x130x43mm
Product weight: 303 g
Quantity quantity: 40 pcs
Boating weight: 12,120 g
carton size:cm
product description
1. Battery voltage detection
2. Battery impedance test
3. Residual power test
4. Battery life
5. Cold start current detection
6. Black and white screen is 2.1-inch
7. Support for 6 languages: German, English, Spanish, French, Italian, Russian, Chinese
8. Communication mode, OBD interface
9.CE / FCC / ROHS / UKCA certification
measuring range
CCA:100-2000A.
BCI:100-2000A.
CA:100-2000A.
MCA:100-2000A.
JIS:26A17-24SH52.
DIN:100-1400A.
IEC:100-1400A.
EN:100-2000A.
SAE:100-2000A.
GB:10-250Ah.
Reference Price (FOB)
1. Single piece Price, USD47.10
2.50set, USD28.24
3.100set, USD25.42
4.150set, USD22.88
5.200set, USD20.60
6.250set, USD18.53
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU PSV02H4
Trade name: Bluetooth dual-mode ELM327 OBD2 automotive fault detector manufacturer direct automotive diagnosis tool
technical parameter
Connection mode: Bluetooth dual-mode
Support system: iOS / Android / Windows
Operating voltage: 9V 16V
Operating current: 22mA
Operating temperature: -40 85
Product size: 45 * 25 * 75mm
Packaging dimensions: electrostatic bag packaging
Product weight: 31g
Quantity quantity: 500 pcs
product description
1. Diagnosis of the automobile engine system
2. Engine fault lamp clearance
3. Automotive data flow
4. Regular OBD functions can be realized
5. Self-developed APP
6. Small size, high chip integration degree, with independent appearance patent, utility model patent and software copyright passed
7, CE, FCC and RoHS certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Reference Price (FOB)
1. Single product price, USD7.10
2.50set, USD4.26
3.100set, USD3.83
4.150set, USD3.45
5.200set, USD3.11
6.250set, USD2.80
7.300set, USD2.50
8.500set, USD2.30
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU PSV317
Trade name: elm327 Automobile diagnostic instrument, engine fault detector, obd 2 Bluetooth reading code reading card, automobile diagnostic tool factory direct sales. (OBD interface)
technical parameter
Master control chip: crystal element
Operating voltage: 12V
Operating current: 51 mA
Standby current: 50 mA
Operating environment: -30 70
Storage temperature: -3,070
Overall dimensions: 168 * 897 * 24mm
Packaging size: 200 * 130 * 43mm
Product weight: 204g (including wire material)
With packaging: 295g
Quantity quantity: 40 pcs
product description
1. Read the errors and clear the diagnostic codes
2. Quickly determine the reason for checking the engine lamp
3. Oxygen sensor test
4. The EVAP test of No
5. Frozen the frame data
6.I / M data
7. View the vehicle information
8. Automotive data flow
9. Real-time curve
10. Battery voltage detection
11. Smart indicator light
12. Support for multiple languages: German, Dutch, English, Spanish, French, Italian, Russian, and Chinese
13. Color screen display 2.8
14. Communication mode, OBD interface
15.CE, FCC, and RoHS certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Reference Price (FOB)
1. Single product price, USD58.90
2.50set, USD35.30
3.100set, USD31.76
4.150set, USD28.60
5.200set, USD25.72
6.250set, USD23.20
7.300set, USD20.90
8.500set, USD18.90
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU: PSV310
Trade name: Fault code clearance, elm327 decoder, engine fault data flow code card, elm327 fault detector, obd 2 diagnostic code card, vehicle information reading. Factory direct selling (OBD connector)
technical parameter
Master control chip: crystal element
Operating voltage: 9-16V
Operating current: 80mA
Operating temperature: -30 ~70
Product size: 155 * 85 * 25mm
Packaging size: 200 * 130 * 43mm
Product weight: 200g
Color box packaging: 318g
Plastic suction packaging: 368g
Quantity quantity: 40 pcs
product description
1. Read the errors and clear the diagnostic codes
2. Quickly determine the reason for checking the engine lamp
3. View the frozen frame information
4. Display the I / M preparation status
5. Retrieve the vehicle information
6. Data flow
7. Real-time curve
8. Supports 6 languages: English, German, Spanish, Italian, French, and Dutch
9. Screen size is 2.8
10. Communication mode, OBD interface
10.CE/FCC/ROHS/UKCA Certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Reference Price (FOB)
1. Single piece Price, USD31.20
2.50set, USD18.70
3.100set, USD16.84
4.150set, USD15.16
5.200set, USD13.64
6.250set, USD12.30
7.300set, USD11.10
8.500set, USD9.99
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU PS V04HU
Trade name: OBDMONSTER ELM327, FORScan OBD2 USB adapter for Windows, ELMconfig scanner with MS CAN / HS CAN switch, for F150 F250 cars and light truck, Windows diagnostic with V1.5 PIC18F25K80 chip. (Support for OBD-protocol models manufactured after 1996: including VPW, PWM, ISO, KWP 2000, CAN protocol)
technical parameter
attended mode:USB
Main control chip: 25K80
Support system: Windows
Operating voltage: 9V 16V
Operating current: 15mA
Operating temperature: -40 85
Product size: 45 * 25 * 75mm (line length: 150cm)
Product weight: 92.5g
Quantity quantity: 50 pcs
product description
1. Diagnosis of the automobile engine system
2. Engine fault lamp clearance
3. Automotive data flow
4. Regular OBD functions can be realized
5. Recommended APP FOR Android: torque, OBD Home FOR Apple: car scanner, OBD Auto Doctor, OBD Home
6. CE, FCC, and RoHS certification
Support models:
BMW, West, Ford, MINI, Jaguar, Mercedes, Volkswagen, Chrysler, Dodge, Acura, BYD F3 / F0, Chery, 09 Alto,
Suzuki, Honda, Toyota, Mazda, Mitsubishi, Nissan, Subaru, Land Rover, Chevrolet, Skoda, Infiniti, Infiniti, Kia, Hyundai, Audi, Saab, Saab, Opel, Citroen, Peugeot,
Volvo, Fiat, et al
product description
1. Read GM specific diagnostic fault codes and display their definition (the software contains more than 3000 fault codes)
2. Clear the fault code and turn off the engine (engine) fault alarm indicator light
3. Read the engine real-time dynamic data flow
.. engine speed
.. Calculate the load value
.. coolant temperature
.. Fuel system status
.. speed of a motor vehicle
.. Short-term fuel correction
.. Long-term fuel correction
.. Intake-in manifold pressure
.. Timed ahead
.. inlet temperature
.. air flow rate
.. Throttle opening degree
.. Oxygen sensor voltage / short-term fuel trim
.. Fuel pressure....
Support agreement
S1.SAE J1850 PWM (41.6Kbaud)
2.SAE J1850 VPW (10.4Kbaud)
3.ISO9141-2 (5 baud init, 10.4Kbaud)
4.ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5.ISO14230-4 KWP (fast init, 10.4 Kbaud)
6.ISO15765-4 CAN (11bit ID, 500 Kbaud)
7.ISO15765-4 CAN (29bit ID, 500 Kbaud)
8.ISO15765-4 CAN (11bit ID, 250 Kbaud)
9.ISO15765-4 CAN (29bit ID, 250 Kbaud)
Reference Price (FOB)
1. Single product price, USD21.20
2.50set, USD12.71
3.100set, USD11.44
4.150set, USD10.30
5.200set, USD9.27
6.250set, USD8.34
7.300set, USD7.50
8.500set, USD6.80
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU PS B02
Trade name: Intelligent master 25K80 chip, elm327 automotive diagnostic instrument, engine fault detector, obd 2 Bluetooth reading code card, automotive diagnostic tool factory direct sales. (FOR Android: torque, OBD Home)
technical parameter
Connection mode: Bluetooth 2.0
Main control chip: 25K80
Support system: Android / Windows
Operating voltage: 9V 16V
Operating current: 35mA
Operating temperature: -40 85
Product size: 43 * 25 * 30mm
Package size: 100*63*25.5mm
Product weight: 34g
Quantity quantity: 100 pcs
product description
1: Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
2: Clear trouble codes and turn off the MIL ( "Check Engine" light)
3: Display current sensor data, including:
4: Engine RPM
5: Calculated Load Value
6: Coolant Temperature
7: Fuel System Status
8: Vehicle Speed
9: Short Term Fuel Trim
10: Long Term Fuel Trim
11: Intake Manifold Pressure
12: Timing Advance
13: Intake Air Temperature
14: Air Flow Rate
15: Absolute Throttle Position
16: Oxygen sensor voltages / associated short term fuel trims
17: Fuel System status
18: Fuel Pressure
19: Many others
20. Small size, high chip integration degree, with independent appearance patent, utility model patent and software copyright passed
21. CE, FCC and RoHS certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Reference Price (FOB)
1. Single product price, USD18.24
2.50set, USD10.94
3.100set, USD9.85
4.150set, USD8.87
5.200set, USD7.98
6.250set, USD7.18
7.300set, USD6.50
8.500set, USD5.80
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU PS B14
Trade name: Intelligent master control 25K80 chip, obd diagnostic instrument, Bluetooth dual-mode ELM327, OBD 2 vehicle fault detector, elm327 factory direct sales. (FOR Android: torque, OBD Home FOR Apple: car scanner, OBD Auto Doctor, OBD Home)
technical parameter
Connection mode: Bluetooth 4.0
Main control chip: 25K80
Support system: iOS / Android / Windows
Operating voltage: 9V 16V
Operating current: 35mA
Operating temperature: -40 85
Product size: 45 * 40 * 20mm
Package size: 100*63*25.5mm
Product weight: 31g
Quantity quantity: 100 pcs
product description
1. Diagnosis of the automobile engine system
2. Engine fault lamp clearance
3. Automotive data flow
4. Regular OBD functions can be realized
5. Recommended APP FOR Android: torque, OBD Home FOR Apple: car scanner, OBD Auto Doctor, OBD Home
6. Small size, high chip integration degree, with independent appearance patent, utility model patent and software copyright passed
7, CE, FCC and RoHS certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Reference Price (FOB)
1. Single product price, USD37.65
2.50set, USD22.60
3.100set, USD20.30
4.150set, USD18.30
5.200set, USD16.50
6.250set, USD14.80
7.300set, USD13.30
8.500set, USD12.00
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU PSVP005
Trade name: Bluetooth Bluetooth 5.0, elm327 V2.2 auto fault detector, vehicle fault diagnosis instrument, obd diagnosis tool, car Bluetooth reading code card, factory direct sales (PSVP006 model red supports Wifi connection).
technical parameter
Communication mode: Bluetooth 4.0 / Bluetooth 5.0 / BLE
Main control chip: PIC18 F25K80
Operating voltage: 12V
Operating current: 26 mA
Operating temperature: -40 + 80
Working humidity: less than 60%
Product size: 48.2*44*23.6mm
packing measurement:mm
Product weight: g
packing quantity:pcs
product function:
1. 9 protocols supporting the OBD II / EOBD standard
2. Wide power range: 9~36V power supply, reliable over current and over voltage protection
3. Adopt the standby low-power mode to ensure the safe use of car batteries
4. Bluetooth dual-mode 4.0, support for Android system and Apple system
5. Use digital tube to display voltage and current to improve customer experience
6. Compatible software platform
Window version: Scan Master, ScanTool.net, PCMSCAN, etc
Android version: Torque, dashboard commands, OBD Auto Doctor, Auto doctor, Mini OBD II, EOBD, etc
Version of iOS: automatic doctor, OBD car doctor, dashboard commands, EOBD, etc
Symbian version: OBDScope
Software support platform: Windows XP, Windows 7 / 8, Android, iOS, Symbian island and other systems
product description
Read the generic and manufacturer-specific error diagnostic codes and show their meaning (the database has over 3000 generic code definitions)
Clear the error code and turn off the MIL (Check Engine indicator)
Display the current sensor data, including:
Engine RPM per minute (RPM)
Calculate the load value
coolant temperature
Fuel system status
Short-term fuel condition
Long-term fuel condition
Intake manifold pressure
Fuel injection propellant
inlet temperature
air velocity
Absolute position of the throttle valve
Oxygen detection voltage associated with the short-term fuel status
Fuel system status
Fuel pressure
There are many other data on fuel consumption monitoring.
Future features of the software:
Display and logging of the data charts
Freeze frame data
Results of the continuous and discontinuous oxygen tests
Recommended APP, FOR Android: torque, OBD Home, FOR Apple: car scanner, OBD Auto Doctor, OBD Home
Small size, high chip integration, with independent appearance patent, utility model patent and software copyright.
Certified by CE, FCC, and RoHS.
Reference Price (FOB)
1. Single product price, USD70.60
2.50set, USD42.40
3.100set, USD38.10
4.150set, USD34.30
5.200set, USD30.90
6.250set, USD27.80
7.300set, USD25.00
8.500set, USD22.50
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU: PSV309
Trade name: Automotive diagnostic instrument, obd 2 automotive fault diagnosis, engine diagnostic instrument, automotive diagnostic tool factory direct sales (OBD connector)
technical parameter
Master control chip: crystal element
Operating voltage: 9V~16V
Operating current: 80mA
Standby current: 25mA
Operating temperature: -30 70
Product size: 95.5 * 72.1 * 22.2
Packaging size: 200 * 130 * 31mm
Product weight: 147g
Packaging: 208g
Quantity quantity: 48g
product description
1. Read the car fault code
2. Clear the fault code
3. Freeze the frame for viewing
4.I / M data
5. Vehicle information
6. Support for 6 languages: German, English, Spanish, French, Dutch, and Chinese
7. Screen size is 2.1
8. Communication mode, OBD interface
9.CE / FCC / ROHS / UKCA certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Reference Price (FOB)
1. Single piece Price, USD26.47
2.50set, USD15.88
3.100set, USD14.30
4.150set, USD12.86
5.200set, USD11.57
6.250set, USD10.41
7.300set, USD9.37
8.500set, USD8.45
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU: PSV311A
Trade name: Auto fault detector, engine elm327 fault detector, diagnostic instrument, obd 2 diagnostic code card, battery voltage detection, factory direct selling (OBD connector)
technical parameter
Master control chip: crystal element
Operating voltage: 12V
Operating current: 70 mA
Operating temperature: -30 70
Product size: 156 * 88 * 24mm
Packaging size: 200 * 130 * 43mm
With packaging: 301g
Quantity quantity: 40 pcs
product description
1. Read the errors and clear the diagnostic codes
2. Quickly determine the reason for checking the engine lamp
3. View the frozen frame information
4. Display the I / M preparation status
5. Retrieve the vehicle information
6. Data flow
7. Real-time curve
8. Retrieve the vehicle speed information
9. Support for 6 languages: German, English, Spanish, French, Italian, Dutch, and Chinese
10. Screen size is 2.8
11. Communication mode, OBD interface
12.CE/FCC/ROHS/UKCA Certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Reference Price (FOB)
1. Single piece Price, USD48.90
2.50set, USD29.30
3.100set, USD26.40
4.150set, USD23.70
5.200set, USD21.35
6.250set, USD19.20
7.300set, USD17.30
8.500set, USD15.60
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU: PSV502
Trade name: Fault code quick clearing, elm327 decoder, engine fault data flow reading card, elm327 fault detector, obd 2 diagnostic reading card, vehicle information reading card. Factory direct selling (OBD universal 16 PIN connector)
technical parameter
Master control chip: STM32F103VCT6 / APM32F103VCT6
Operating voltage: 9 36V
Operating current: 70-90 mA
Operating environment: -20 65
Storage temperature: -30 80
Overall dimension: 138.9 * 85 * 22mm
Packaging size: 200 * 130 * 43mm
Product weight: 265g
With packaging: 336g
Quantity quantity: 40 pcs
product description
1. Support the nine standard protocols for OBD II / EOBD.
2. Support the vehicle battery voltage test.
3. Support gasoline models to read, clear vehicle fault code, read data flow, freeze frame information, check MIL status, read vehicle information, oxygen sensor test, on-board monitoring (mode 6), evaporation system (mode 8) test.
4. Support fault code information query, with built-in about 40,000 fault code library information.
5. Support data flow playback function, view / delete fault code, data flow and freeze frame information.
6. Support USB printing function, which can print fault code, data flow and freeze frame information.
7. Support for seven languages: English, Chinese, Italian, French, Spanish, German, and Russian.
8. Color screen display 2.8
9. Communication mode, OBD interface
10.CE/FCC/ROHS/UKCA Certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Reference Price (FOB)
1. Single product price, USD153.00
2. 50set, USD91.80
3. 100set, USD82.62
4. 150set, USD74.36
5. 200set, USD66.92
6. 250set, USD60.23
7. 300set, USD54.20
8. 500set, USD48.80
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU: PSB0129
PSB0129. VR800 Vgate OBD2 fault code reader, OBD-II CAN diagnostic scanning tool, engine light vehicle scanner, factory direct sales (OBD scanner has new features such as battery status display, DTC help, graphic real-time data, all OBD-II protocols, and support for all 10 OBD-II test modes).
Display: TFT Color Display (320X240 dpi)
Operating temperature: 0 to 60 C (32 to 140 F)
Storage temperature: -20 to 70 C (-4 to 158 F)
External power supply: 8.0 to 18.0V power supply through the vehicle battery
Overall dimension: 25cm * 15cm * 7cm
packing measurement:mm
Product weight: g
Packing with tape: 0.51 Kg
packing quantity:pcs
product description
The OBD scanner features new features such as battery status display, DTC help, graphical real-time data, all OBD-II protocols, and support for all 10 OBD-II test modes
The scanner meets SAEJ1979 and has been upgraded to the latest, which enables you to retrieve a variety of information from the ECU, including diagnostic fault codes, and helps you figure out what happens when the check engine light triggers
Fully provide you with intelligent and convenient operation. Quick access to VIN queries, DTC queries, data management, data playback, remote assistance, feedback icons, screen shots, etc
Multilingual support to freely switch the languages you need in the application, English, French, German, Italian, Spanish, Russian, Portuguese. You can choose your native language for testing.
Built-in code base to retrieve vehicle information (VIN, CIN, CVN)
Retrieve and delete error codes, real-time data streams displayed in text or graphical format
Oxygen sensor test, Evap system test, I / M readiness test, and display onboard monitor test results
Real-time battery voltage, and view frozen frame data, record and playback, LED notifications, and print data
12. Communication mode, OBD interface
13.CE/FCC/ROHS/UKCA Certification
Support for all OBDII protocols:
ISO9141, KWP2000, J1850 PWM, J1850 VPW, ISO15031, and CAN. Conwith SAEJ1979 upgraded to the latest.
Compatible vehicles: Suitable for most vehicles sold in the United States, model year 1996 or update, 2000 EU and 2005 Asian vehicles or update. For vehicles meeting OBD-II / CAN / EOBD standards, including light trucks, SUVs, minivans and hybrid vehicles sold worldwide
Reference Price (FOB)
1. Single product price, USD135.30
2. 50set, USD581.20
3. 100set, USD73.10
4. 150set, USD65.80
5. 200set, USD59.20
6. 250set, USD53.30
7. 300set, USD48.00
8. 500set, USD43.20
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
PSA0161. PRO V1.27.001 FORD Cars Auto Fault Detection Line. The latest V1.27.001 version of the Ford PRO + supports Ford cars with a 35-token full-license UCDS pro UCDS fully activated.
Descriptionï¼?
The UCDS consists of drivers of the serial bus USB-serial (recommended drivers FTDI), hardware adapter and the actual UCDS-programm.
The software interface of the UCDS interface has main windowâ??s mode. You need to select the type of the vehicle or select the service mode for adapter`s firmware update or other service functions.
UCDS currently works with the following platforms: For Focus II 2004-2011; For Focus III 2011, 2015 ; For Kuga I, For Kuga II; For C-MAX; For S-MAX; For MONDEO IV; For Mondeo 2015 ; For Galaxy ; For Tansit; For Fiesta 2008, 20015 etc..
New Released Diagnostic Adapter with neweest software V1.27.001 can replace For Ford Vehicle Communicate Module 2, just one difference, UCDS cannot key programming, but UCDS (Universal CAN Diagnostic System) for Ford can support Mileage Correction and it is full function type.
Please Note Important:
Please Disconnect internet when Run software.
Please don't update online, otherwise it will be locked.
MUST Click "No" when message show out to ask you update.
Highlights to get UCDS PRO+:
UCDS Software: V1.27.001
Functions:
1. Read the fault code
2. Clear trouble codes
3. Read the data stream
4. Data recording
5. Module reset
6. Module Installation
7. Re-program the ECU TCM BCM and so on
8. Clear the airbag (RCM) collision data
9. Read, backup, edit, and erase AsBuilt files
10. Read, backup, edit, and erase the underlying DirectConfig configuration file
11. Support power to enhance the brush to write, such as Mondeo 2.0T 200HP brush 240HP, 12 Fox 85HP brush 105HP, 150HP brush 163HP
12. Support VBF file directly to write
13. Support BIN file directly to write
14. Support online update vehicle entire module (Update Wizard)
15. Support For Fox MK2, 12 for Fox MK3, winning, S-Max and other models meter mileage clear, brush to write
For UCDS-Ford New Features:
The dashboard can be displayed from English to Chinese; the new for Mondeo power can be upgraded from low to high; the navigation OPS of Escape can be flashed; the SCT program can be input; the SCT device (token limited) can be replaced.
Supported Vehicles:
For Fox MK2 (2004-2014) C307
New For Focus MK3 (2012-2017) C346
For Wing tiger 15 wing tiger 17 wing tiger
For Mondeo wins S-Max Galay
New For
Step Price (FOB):
1. Sample unit price USD13.80,
2. 1000set, USD8.30,
3. 2000set, USD7.50,
4. 3000set, USD6.80,
5. 4000set, USD6.10.
Remarks: Free shipping for sample unit price.
SPU: PSV311B
Trade name: Car battery detector, 12V battery detection, battery diagnostic instrument, motorcycle / yacht battery diagnostic instrument general factory direct sales
technical parameter
Main control chip: APM32F103VCT6
Operating voltage: 9-18V
Operating temperature: -20 60
Storage temperature: -20 70
Interface type: a pair of reverse black and red crocodile clips with a length of 1 meter
Product size: 156 * 88 * 24mm
Packaging size: 200 * 130 * 43mm
Packaging: 370g
Quantity quantity: 40 pcs
product description
1. Battery voltage detection
2. Battery impedance test
3. Residual power test
4. Battery life
5. Cold start current detection
6. Color screen is 2.8 inches
7. Support for 9 languages: German, English, Spanish, French, Italian, Dutch, Portuguese, Polish, and Russian
8.CE / FCC / ROHS / UKCA certification
measuring range
CCA:100-2000A.
BCI:100-2000A.
CA:100-2000A.
MCA:100-2000A.
JIS:26A17-24SH52.
DIN:100-1400A.
IEC:100-1400A.
EN:100-2000A.
SAE:100-2000A.
GB:10-250Ah.
Reference Price (FOB)
1. Single piece Price, USD73.53
2.50set, USD44.12
3.100set, USD39.71
4.150set, USD35.74
5.200set, USD32.17
6.250set, USD28.95
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU PSV019
Trade name: OBD scan machine Bluetooth reading card engine scan machine elm327
technical parameter
Connection mode: Bluetooth dual-mode
Support system: iOS / Android / Windows
Operating voltage: 9V 16V
Operating current: 16m
Operating temperature: -40 85
product description
1. Diagnosis of the automobile engine system
2. Engine fault lamp clearance
3. Automotive data flow
4. Regular OBD functions can be realized
5. Self-developed APP
6. Small size, high chip integration degree, with independent appearance patent, utility model patent and software copyright passed
7, CE, FCC and RoHS certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Reference Price (FOB)
1. Single product price, USD28.30
2.50set, USD17.00
3.100set, USD15.30
4.150set, USD13.80
5.200set, USD12.40
6.250set, USD11.20
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU PSV018
Trade name: car fault diagnosis instrument, obd diagnosis tool, car code reading card, Bluetooth car detector, factory direct selling (OBD connector).
technical parameter
Connection mode: Bluetooth 5.0
Main control chip: 25K80
Support system: Android / Windows / Ios
Operating voltage: 9V / 16V
Operating current: 26mA
Operating temperature: -40 + 85
Product size: 47 * 46 * 24mm
Packing size: 110 * 70 * 30mm
Product weight: 82g
Quantity quantity: 90 pcs
product description
1. Bluetooth 5.0, farther transmission distance, better stability and low power consumption
2. Diagnosis of automobile engine system
3. Engine fault lamp clearance
4. Automotive data flow
5. Regular OBD functions can be realized
6. Recommended APP, FOR Android: torque, OBD Home, FOR Apple: car scanner, OBD Auto Doctor, OBD Home
7. Small size, high chip integration, independent appearance patent, utility model patent and software copyright.
7. Through CE, FCC, RoHS certification.
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Reference Price (FOB)
1. Single product price, USD48.30
2.50set, USD28.95
3.100set, USD26.10
4.150set, USD23.50
5.200set, USD21.10
6.250set, USD19.00
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU PSV02H2D
Trade name: Intelligent master 25K80 chip, elm327 automotive diagnostic instrument, engine fault detector, obd 2 Bluetooth reading code card, automotive diagnostic tool factory direct sales
(FOR Android: torque, OBD Home)
technical parameter
Connection mode: Bluetooth 2.0
Main control chip: 25K80
Support system: Android / Windows
Operating voltage: 9V 16V
Operating current: 35mA
Operating temperature: -40 85
Product size: 45 * 25 * 65mm
Package size: 100*63*25.5mm
Product weight: 40g
Quantity quantity: 100 pcs
product description
1. Diagnosis of the automobile engine system
2. Engine fault lamp clearance
3. Automotive data flow
4. Regular OBD functions can be realized
5. Recommend APP FOR Android torque and OBD Home
6. Small size, high chip integration degree, with independent appearance patent, utility model patent and software copyright passed
7, CE, FCC and RoHS certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Reference Price (FOB)
1. Single product price, USD17.65
2.50set, USD10.60
3.100set, USD9.53
4.150set, USD8.60
5.200set, USD7.72
6.250set, USD7.00
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU PSVP001
Trade name: Bluetooth Bluetooth 4.0, elm327 V2.2 auto fault detector, auto fault diagnosis instrument, obd diagnosis tool, car Bluetooth reading code card, factory direct selling (PSVP003 model supports Bluetooth + type-C).
technical parameter
Communication mode: Bluetooth 24.0
Main control chip: PIC18 F25K80
Support system: Android / Windows / Ios
Operating voltage: 9V / 16V
Operating current: 40mA
Operating temperature: -40 + 80
Working humidity: 60%
Product size: 56 * 45.8 * 24mm
Packing size: 110 * 70 * 30mm
Product weight: 82g
Quantity quantity: 90 pcs
product function:
1. 9 protocols supporting the OBD II / EOBD standard
2. Wide power range: 9~36V power supply, reliable over current and over voltage protection
3. Adopt the standby low-power mode to ensure the safe use of car batteries
4. Bluetooth dual-mode 4.0, support for Android system and Apple system
5. Use digital tube to display voltage and current to improve customer experience
6. Compatible software platform
Window version: Scan Master, ScanTool.net, PCMSCAN, etc
Android version: Torque, dashboard commands, OBD Auto Doctor, Auto doctor, Mini OBD II, EOBD, etc
Version of iOS: automatic doctor, OBD car doctor, dashboard commands, EOBD, etc
Symbian version: OBDScope
Software support platform: Windows XP, Windows 7 / 8, Android, iOS, Symbian island and other systems
product description
Read the error diagnostic code
Clear fault code (clear error code and close MIL)
Engine RPM per minute (RPM)
Calculate the load value
coolant temperature
Fuel system status
velocity
Short-term fuel condition
Long-term fuel condition
Intake manifold pressure
Fuel injection advance time
inlet temperature
air flow rate
Throttle absolute position
Oxygen detection voltage associated with the short-term fuel status
Fuel system status
Fuel pressure
Fuel consumption monitoring, etc.
Note: According to the number of actual supported data items, year support.
Recommended APP, FOR Android: torque, OBD Home, FOR Apple: car scanner, OBD Auto Doctor, OBD Home
Small size, high chip integration, with independent appearance patent, utility model patent and software copyright.
Certified by CE, FCC, and RoHS.
Reference Price (FOB)
1. Single product price, USD88.30
2.â?¥50set, USD53.00
3.100set, USD47.65
4.150set, USD42.90
5.200set, USD38.60
6.250set, USD34.75
7.300set, USD31.30
8.500set, USD28.20
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU: PSV300
Trade name: Fault code quick clearing, I / M status detection, engine fault data flow code card, elm327 fault detector, obd 2 diagnostic code card, vehicle information reading card. Factory direct selling (OBD connector)
technical parameter
Master control chip: crystal element
Operating voltage: 12V
Operating current: 64 mA
Operating temperature: -30~70â
Product size: 123 * 65 * 22mm
Packaging size: 245 * 160 * 33mm
Product weight: 135g
With packaging: 243g
Quantity quantity: 50 pcs
product description
1. Read the car fault code
2. Clear the fault code
3.I/M
4. Rack number
5. Support for 1 language: English
6. Communication mode, OBD interface
7.CE / FCC / ROHS / UKCA certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Reference Price (FOB)
1. Single piece Price, USD24.70
2.50set, USD14.83
3.100set, USD13.35
4.150set, USD12.00
5.200set, USD10.82
6.250set, USD7.74
7.300set, USD7.00
8.500set, USD6.30
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU: PSV311
Trade name: Fault code quick clearing, elm327 decoder, engine fault data flow code card, elm327 fault detector, obd 2 diagnostic code card, vehicle information reading card. Factory direct selling (OBD connector)
technical parameter
Master control chip: crystal element
Operating voltage: 9-36V
Operating current: 58mA
Operating temperature: -20 65
Product size: 156 * 88 * 24mm
Packaging size: 200 * 130 * 43mm
Product weight: 198g
With packaging: 315g
Quantity quantity: 40 pcs
Product color: dark night green # 374840, fan night black # 000000
product description
1. Read the errors and clear the diagnostic codes
2. Quickly determine the reason for checking the engine lamp
3. View the frozen frame information
4. Display the I / M preparation status
5. Retrieve the vehicle information
6. Data flow
7. Real-time curve
8. Support for 8 languages: English, German, Spanish, French, Italian, Russian, Dutch, and Chinese
9. Support for online upgrades
10. Color screen shows 2.8
11. Communication mode, OBD interface
12.CE/FCC/ROHS/UKCA Certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Reference Price (FOB)
1. Single product price, USD70.60
2.50set, USD42.35
3.100set, USD38.12
4.150set, USD34.31
5.200set, USD30.88
6.250set, USD27.80
7.300set, USD25.00
8.500set, USD22.50
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU: PSV500
Trade name: Diesel vehicle fault detector, gasoline vehicle diagnosis instrument, obd 2 vehicle fault diagnosis instrument, engine diagnosis code card, vehicle diagnosis tool, vehicle information reading code card, diesel steam integrated diagnostic instrument factory direct selling (OBD connector)
technical parameter
Main control chip: LPC1765FBD100
Operating voltage: 9~16V
Operating current: 89 mA
Operating environment: -20 65
Storage temperature: -30 80
Overall dimension: 138.9 * 85 * 22mm
Packaging size: 175 * 258 * 62mm
Product weight: 500g
With packaging: 702g
Quantity quantity: 15 pcs
product description
1. Support the nine standard protocols for OBD II / EOBD.
2. Support for common truck SAE J1939 / SAE J1708 protocols.
3. Support gasoline models to read, clear vehicle fault code, read data flow, freeze frame information, check MIL status, read vehicle information, oxygen sensor test, on-board monitoring (mode 6), evaporation system (mode 8) test.
4. Support truck models to read vehicle information, read / clear fault code information and data flow information.
5. Support fault code information query, with built-in about 50,000 fault code library information.
6. Support the data flow playback function, view / delete the fault code, the data flow, and freeze the frame information.
7. Support USB printing function, can print fault code, data flow, freeze frame information.
8. Support for 6 languages: English, German, Spanish, French, Italian, Russian, and Chinese
9. Color screen display 2.8
10. Communication mode, OBD interface
11.CE/FCC/ROHS/UKCA Certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
10. SAE J1939
11. SAE J1708/ J1587
Reference Price (FOB)
1. Single product price, USD211.80
2.50set, USD127.10
3.100set, USD114.35
4.150set, USD103.00
5.200set, USD92.60
6.250set, USD83.40
7.300set, USD75.80
8.500set, USD67.50
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
EANï¼?6975913480994
Commodity code: PS000211.
Trade name: PS000211.FOR Honda Acura RDX (2019-2021) Wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product Size: 33 * 15 * 5cm
Commodity weight: 0.45kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable docking.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5.USB fast charging output interface, which supports QC3.0 fast charging protocol.
6.15W super-large coil, FOB foreign body detection, short-circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving universal.
Step Price (FOB):
1. Sample unit price is USD110.40
2.200set, USD66.24
3.400set, USD59.62
4.600set, USD53.66
5.800set, USD48.29
Remarks: Free shipping charge for samples.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Commodity code: PSZ017.
Trade name: PSZ017.For Lexus NX (2015-2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Product Size: 30 * 20 * 8 cm
Commodity weight: 0.60kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?6975913481007
Commodity code: PSZ310.
Trade name: PSZ310.For Lexus ES 300H (2018-2022) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20 + 70
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
Commodity code: PSF1118.
Trade name: PSF1118.For Suzuki Jimni (2020-2023) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headset, electronic watches, car keys and other electronic devices automatic induction charging. built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?6975913481021
Commodity code: PS003000008.
Trade name: PS003000008.FOR Honda CR-V (2017-2019) Wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 10W / 5W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product Size: 23 * 15 * 5cm
Commodity weight: 0.33kg
PC/CT
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5. Support QC3.0 fast charging protocol.
6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD117.70
2.â20set, USD70.60
3.â40set, USD63.50
4.â60set, USD57.20
5.â80set, USD51.50
6.â100set, USD46.30
7.â200set, USD41.70
8.â300set, USD37.50
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?6975913481038
Commodity code: PSZ1021.
Trade name: PSZ1021.For Honda Odyssey (2017-2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Commodity code: PSZ018.
Trade name: PSZ018. For Honda Civic (2016) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN/ctn
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.20set, USD77.70
3.40set, USD67.00
4.60set, USD63.00
5.80set, USD56.60
6.100set, USD51.00
7.200set, USD45.90
8.300set, USD41.30
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
PSZ1065S. Honda CRV 2017-2021 Dedicated Multifunctional Wireless Car Charger.
technical parameter:
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 10W
Conversion efficiency: 75% +
Input parameter: 9-16V
Output parameters: 5-9V
Operating temperature: - + 70
Operating frequency: 110KHz-205KHz
Input interface: mounted power supply
Charging mode: electromagnetic induction [wireless end] USB
Installation position: central content box
Before Honda Car Wireless charger Honda CRV (GM) Car charger iPhone / Nokia / Samsung mobile phone wireless charger Xiaomi / OPPO / vivo / Sony / Dpod / Blackberry / HTC etc mobile phone wireless charger Motorola / LG / Android / Huawei mobile phone wireless charger headset wireless charger, watch wireless charger car key wireless charger, auto induction wireless charger wireless fast charger, car wireless charger 5W / 10W / 15W wireless charger QI wireless charger USB charger Mobile phone accessories Universal charger Solar mobile phone charger Wii charger
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable docking.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5.USB fast charging output interface, which supports QC3.0 fast charging protocol.
6.10W Very large coil, FOB foreign body detection, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Commodity code: PSZ021.
Trade name: PSZ021. For Honda Alisson (2016-2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN/ctn
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.â?¥20set, USD77.70
3.â?¥40set, USD67.00
4.â?¥60set, USD63.00
5.â?¥80set, USD56.60
6.â?¥100set, USD51.00
7.â?¥200set, USD45.90
8.â?¥300set, USD41.30
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?6975913481045
Commodity code: PSZ023.
Trade name: PSZ023. Ford Honda Crown Road URV (2017-2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN/ctn
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.â?¥20set, USD77.70
3.â?¥40set, USD67.00
4.â?¥60set, USD63.00
5.â?¥80set, USD56.60
6.â?¥100set, USD51.00
7.â?¥200set, USD45.90
8.â?¥300set, USD41.30
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Commodity code: PSZ024.
Trade name: PSZ024. For Honda Accord 9 generation (2014-2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN/ctn
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.20set, USD77.70
3.40set, USD67.00
4.60set, USD63.00
5.80set, USD56.60
6.100set, USD51.00
7.200set, USD45.90
8.300set, USD41.30
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
6975913481052
Commodity code: PSZ025A.
Trade name: PSZ025A. For Honda Accord 10 generation (2018-2020) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
Commodity code: PSZ025B.
Trade name: PSZ025B. For Honda Accord 10 generation (2018-2020) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN/ctn
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Commodity code: PSZ066.
Trade name: PSZ066. For Honda Fit (2014-2019) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN/ctn
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
Commodity code: PSZ071.
Trade name: PSZ071. For Honda Fit (2020) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Product code: PSZ1005S (PSFC1005).
Trade name: PSZ1005S. FOR Honda Accord 10-10.5 generation (2018-2022) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Double coil / 15W motherboard + air cooling + USB / QC3.0 fast charge + power switch + 12V / DC integrated power supply
Product Size: 22.2 * 15.2 * 11 cm
Commodity weight: 0.60kg
16 PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable docking.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5.USB fast charging output interface, which supports QC3.0 fast charging protocol.
6.15W Very large coil, FOB foreign body detection, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Commodity code: PS000149.
Trade name: PS000149. FOR Honda Accord 10 generation / Intel School (2018-2022) wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 10W / 5W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Size of goods: 26.5 * 17 * 4cm
Commodity weight: 0.25kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable docking.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5.USB fast charging output interface, which supports QC3.0 fast charging protocol.
6.15W super-large coil, FOB foreign body detection, short-circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving universal.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Product code: PS028.
Trade name: PS028. For Peugeot 4008,5008 (2016-2019) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Commodity code: PS031S.
Trade name: PS031S. For Volkswagen Tiguan L. Tanyue (2017-2019) Wireless Car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN/ctn
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable docking.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5.USB fast charging output interface, which supports QC3.0 fast charging protocol.
6.15W Very large coil, FOB foreign body detection, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?6975913481083
Product code: PS032.
Trade name: PS032. For Volkswagen Tuon, Huon, Passat (2017-2020) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?6975913481090
Commodity code: PS034B.
Trade name: PS034B. Ford Volkswagen Golf 7 generation (2013-2019) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN/ctn
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?6975913481106
Product code: PS070.
Trade name: PS070. For Volkswagen Golf 6, Sagitar, Shang Cool (2006-2019) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD164.70
2.â?¥20set, USD98.80
3.â?¥40set, USD89.00
4.â?¥60set, USD80.10
5.â?¥80set, USD72.10
6.â?¥100set, USD64.90
7.â?¥200set, USD58.40
8.â?¥300set, USD52.60
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN 6975913481137
Commodity code: PSZ036.
Trade name: PSZ036.For Toyota New bully (2017-2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.20set, USD77.70
3.40set, USD67.00
4.60set, USD63.00
5.80set, USD56.60
6.100set, USD51.00
7.200set, USD45.90
8.300set, USD41.30
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN 6975913481144
Commodity code: PSZ037.
Trade name: PSZ037. For Toyota Camry (2018-2020) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.20set, USD77.70
3.40set, USD67.00
4.60set, USD63.00
5.80set, USD56.60
6.100set, USD51.00
7.200set, USD45.90
8.300set, USD41.30
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN 6975913481151
Commodity code: PSZ038.
Trade name: PSZ038. For Toyota to dazzle, L to enjoy, Eco, Eco FS (2015-2018) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.20set, USD77.70
3.40set, USD67.00
4.60set, USD63.00
5.80set, USD56.60
6.100set, USD51.00
7.200set, USD45.90
8.300set, USD41.30
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
Commodity code: PSZ039.
Trade name: PSZ039. For Toyota RAV4, Rongfang (2013-2019) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.20set, USD77.70
3.40set, USD67.00
4.60set, USD63.00
5.80set, USD56.60
6.100set, USD51.00
7.200set, USD45.90
8.300set, USD41.30
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
Commodity code: PSZ040.
Trade name: PSZ040. Before Toyota Corolla, Corolla Dual Engine E +, Leiling Dual Engine E +, Leiling (2014-2018) wireless vehicle charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.20set, USD77.70
3.40set, USD67.00
4.60set, USD63.00
5.80set, USD56.60
6.100set, USD51.00
7.200set, USD45.90
8.300set, USD41.30
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
Commodity code: PSZ067.
Trade name: PSZ067. For Toyota Helax (2016-2020) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.20set, USD77.70
3.40set, USD67.00
4.60set, USD63.00
5.80set, USD56.60
6.100set, USD51.00
7.200set, USD45.90
8.300set, USD41.30
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
Commodity code: PSZ323.
Trade name: PSZ323. For Toyota Crown (low configuration) (2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.20set, USD77.70
3.40set, USD67.00
4.60set, USD63.00
5.80set, USD56.60
6.100set, USD51.00
7.200set, USD45.90
8.300set, USD41.30
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
Product code: PSZ808S (PSFC1062).
Trade name: PSZ808S.POR Toyota RAV4 Rongfang, Veranda (2019-2022) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Dual coil / 15W motherboard + air cooling + USB / QC3.0 fast charge + 12V / DC integrated power supply
Product size: 26 * 22 * 7 cm
Commodity weight: 0.70kg
12 PC/CTN
1Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable docking.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5.USB fast charging output interface, which supports QC3.0 fast charging protocol.
6.10W Very large coil, FOB foreign body detection, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
Step Price (FOB):
1. Sample unit price USD164.70
2.20set, USD98.80
3.40set, USD89.00
4.60set, USD80.10
5.80set, USD72.10
6.100set, USD64.90
7.200set, USD58.40
8.300set, USD52.60
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
Commodity code: PSZ809.
Trade name: PSZ809. For Toyota Corolla, Lei Ling (2019-2020) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD164.70
2.20set, USD98.80
3.40set, USD89.00
4.60set, USD80.10
5.80set, USD72.10
6.100set, USD64.90
7.200set, USD58.40
8.300set, USD52.60
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
Commodity code: PSZ810.
Trade name: PSZ810. For Toyota Landkuluzer (2016-2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD164.70
2.20set, USD98.80
3.40set, USD89.00
4.60set, USD80.10
5.80set, USD72.10
6.100set, USD64.90
7.200set, USD58.40
8.300set, USD52.60
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
Commodity code: PS000174.
Trade name: PS000174. FOR Toyota Super Master 4Runner (2010-2021) wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 10W / 5W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless end] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product size: 24*23*9.3cm
Commodity weight: 0.63kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable docking.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5.USB fast charging output interface, which supports QC3.0 fast charging protocol.
6.15W super-large coil, FOB foreign body detection, short-circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving universal.
Step Price (FOB):
1. Sample unit price USD117.70
2.20set, USD70.60
3.40set, USD63.50
4.60set, USD57.20
5.80set, USD51.50
6.100set, USD46.30
7.200set, USD41.70
8.300set, USD37.50
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
Commodity code: PS000173.
Trade name: PS000173. FOR Toyota Tacoma (2016-2021) Wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W / 10W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless end] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product Size: 23.7 * 21.7 * 7cm
Commodity weight: 0.52kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable docking.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5.USB fast charging output interface, which supports QC3.0 fast charging protocol.
6.15W super-large coil, FOB foreign body detection, short-circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving universal.
Step Price (FOB):
1. Sample unit price USD117.70
2.â?¥20set, USD70.60
3.â?¥40set, USD63.50
4.â?¥60set, USD57.20
5.â?¥80set, USD51.50
6.â?¥100set, USD46.30
7.â?¥200set, USD41.70
8.â?¥300set, USD37.50
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Product code: PSZ1016S (PSFC1065)
Trade name: PSZ1016S. FOR Toyota Highlander, Crown Land Place (2021-2022) wireless vehicle charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel is suitable for driving.
Three-coil / 15W motherboard + (motherboard system + back of mobile phone) air cooling + double fast charge (USB/QC3.0+Type-c/PD) + touch switch + 12V / DC cable power
Product size: 26 * 22 * 7 cm
Commodity weight: 0.95kg
12 PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable docking.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5.USB fast charging output interface, which supports QC3.0 fast charging protocol.
6.10W Very large coil, FOB foreign body detection, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
1. Sample unit price USD154.60
2.â?¥20set, USD92.80
3.â?¥40set, USD83.50
4.â?¥60set, USD75.10
5.â?¥80set, USD67.60
6.â?¥100set, USD60.90
7.â?¥200set, USD54.80
8.â?¥300set, USD49.30
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
Product code: PSZ1051S (PSFC1061).
Trade name: PSZ1051S. FOR Toyota Highlander (2015-2021) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 10W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20 + 70
Operating frequency: 110 KHz-205 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless end] USB
Installation location: central content box
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel is suitable for driving.
Dual coil / 10W mainboard (wireless dual charge) + air cooling + USB / QC3.0 fast charge + power switch + 12V / DC cable power supply
Size of goods: 32 * 22 * 6.5 cm
Commodity weight: 0.5kg
12 PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable docking.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5.USB fast charging output interface, which supports QC3.0 fast charging protocol.
6.10W Very large coil, FOB foreign body detection, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
Step Price (FOB):
1. Sample unit price USD164.70
2.20set, USD98.80
3.40set, USD89.00
4.60set, USD80.10
5.80set, USD72.10
6.100set, USD64.90
7.200set, USD58.40
8.300set, USD52.60
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
Commodity code: PS000175.
Trade name: PS000175.FOR Toyota Tan Road car pickup truck Tundra (2007-2021) wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W / 10W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless end] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product Size: 35 * 21.2 * 8cm
Commodity weight: 0.74kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable docking.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5.USB fast charging output interface, which supports QC3.0 fast charging protocol.
6.15W super-large coil, FOB foreign body detection, short-circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving universal.
Step Price (FOB):
1. Sample unit price USD170.60
2.200set, USD102.40
3.400set, USD92.10
4.600set, USD82.90
5.800set, USD74.60
6.100set, USD67.20
6.100set, USD60.40
7.200set, USD54.40
8.300set, USD49.00
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Commodity code: PSZ4221.
Trade name: PSZ4221. For Toyota Prado, Bully (2018-2020) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. sample unit price USD141.20
2.20set, USD84.70
3.40set, USD76.30
4.60set, USD68.60
5.80set, USD61.80
6.100set, USD55.60
7.150set, USD50.00
8.300set, USD45.10
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Commodity code: PSF3215.
Trade name: PSF3215. For Toyota Land Patrol (2010-2015) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD164.70
2.20set, USD98.80
3.40set, USD89.00
4.60set, USD80.10
5.80set, USD72.10
6.100set, USD64.90
7.200set, USD58.40
8.300set, USD52.60
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
Trade name: EANï¼?
Commodity code: PSF3221.
Trade name: PSF3221. For Toyota bully (2012-2017) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD164.70
2.20set, USD98.80
3.40set, USD89.00
4.60set, USD80.10
5.80set, USD72.10
6.100set, USD64.90
7.200set, USD58.40
8.300set, USD52.60
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Product code: PSZ2038 (PSFC1069).
Trade name: PSZ2038.FOR Toyota Elfa, FOR Toyota Wilfa (2018-2022) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 10W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: the original vehicle connector cable installation and power supply
Charging mode: electromagnetic induction [wireless end] USB
Installation location: central content box
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Dual coil / 15W motherboard + (back of mobile phone + motherboard) dual outlet heat dissipation + (USB + TYPE-C) 27W super fast charge + power switch + ACC terminal for power supply
Size of goods: 25.5 * 21 * 4.5 cm
Commodity weight: 0.60kg
14 PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD264.70
2.200set, USD158.80
3.400set, USD143.10
4.600set, USD128.80
5.800set, USD115.90
6.100set, USD104.30
7.150set, USD93.90
8.300set, USD84.50
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
EANï¼?
Commodity code: PSZ042.
Trade name: PSZ042. For GAC Trumpchi GS4 (2015-2017) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.20set, USD77.70
3.40set, USD67.00
4.60set, USD63.00
5.80set, USD56.60
6.100set, USD51.00
7.200set, USD45.90
8.300set, USD41.30
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
EANï¼?
Product code: PSZ044B
Trade name: PSZ044B.For Mitsubishi Outlander (2017-2019) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.20set, USD77.70
3.40set, USD67.00
4.60set, USD63.00
5.80set, USD56.60
6.100set, USD51.00
7.200set, USD45.90
8.300set, USD41.30
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
EANï¼?
Commodity code: PSZ045.
Trade name: PSZ045.For Mitsubishi Pajero (2006-2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.20set, USD77.70
3.40set, USD67.00
4.60set, USD63.00
5.80set, USD56.60
6.100set, USD51.00
7.200set, USD45.90
8.300set, USD41.30
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
EANï¼?
Product code: PSZ045B
Trade name: PSZ045B.For Mitsubishi Pajero (2014-2019) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. sample unit price USD141.20
2.20set, USD84.70
3.40set, USD76.30
4.60set, USD68.60
5.80set, USD61.80
6.100set, USD55.60
7.150set, USD50.00
8.300set, USD45.10
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Product code: PSZ068
Trade name: PSZ068. Mitsubishi Magic dazzle (2014-2019) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. sample unit price USD141.20
2.20set, USD84.70
3.40set, USD76.30
4.60set, USD68.60
5.80set, USD61.80
6.100set, USD55.60
7.150set, USD50.00
8.300set, USD45.10
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Product code: PSZ069
Trade name: PSZ069.For Mitsubishi Yi Song (2014-2019) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. sample unit price USD141.20
2.20set, USD84.70
3.40set, USD76.30
4.60set, USD68.60
5.80set, USD61.80
6.100set, USD55.60
7.150set, USD50.00
8.300set, USD45.10
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
EANï¼?
Commodity code: PS000192.
Trade name: PS000192.FOR Chevrolet Explorer (2017-2020) Wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Emission power: 15W / 10W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product size: 26.8*15.8*3.7cm
Commodity weight: 0.34kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5. Support QC3.0 fast charging protocol.
6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blueis in charging, and redis in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD117.70
2.20set, USD70.60
3.40set, USD63.50
4.60set, USD57.20
5.80set, USD51.50
6.100set, USD46.30
7.200set, USD41.70
8.300set, USD37.50
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Commodity code: PS000192.
Trade name: PS000192.FOR Chevrolet Explorer (2017-2020) Wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Emission power: 15W / 10W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product size: 26.8*15.8*3.7cm
Commodity weight: 0.34kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5. Support QC3.0 fast charging protocol.
6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blueis in charging, and redis in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD117.70
2.20set, USD70.60
3.40set, USD63.50
4.60set, USD57.20
5.80set, USD51.50
6.100set, USD46.30
7.200set, USD41.70
8.300set, USD37.50
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Commodity code: PS000192.
Trade name: PS000192.FOR Chevrolet Explorer (2017-2020) Wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Emission power: 15W / 10W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product size: 26.8*15.8*3.7cm
Commodity weight: 0.34kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5. Support QC3.0 fast charging protocol.
6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blueis in charging, and redis in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD117.70
2.20set, USD70.60
3.40set, USD63.50
4.60set, USD57.20
5.80set, USD51.50
6.100set, USD46.30
7.200set, USD41.70
8.300set, USD37.50
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Product code: PS000198
Trade name: PS000198.FOR Chevrolet Chevy Silverado, GMC sierra (2019-2022) Wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W / 10W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Size of goods: 36.8 * 20.5 * 8cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5. Support QC3.0 fast charging protocol.
6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blueis in charging, and redis in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD117.70
2.20set, USD70.60
3.40set, USD63.50
4.60set, USD57.20
5.80set, USD51.50
6.100set, USD46.30
7.200set, USD41.70
8.300set, USD37.50
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Commodity code: PSF3307.
Trade name: PSF3307.For Mazda 3, Axera (2020) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD164.70
2.20set, USD98.80
3.40set, USD89.00
4.60set, USD80.10
5.80set, USD72.10
6.100set, USD64.90
7.200set, USD58.40
8.300set, USD52.60
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
EANï¼?
Commodity code: PSZ047.
Trade name: PSZ047.For Mazda CX-4 (2016-2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.20set, USD77.70
3.40set, USD67.00
4.60set, USD63.00
5.80set, USD56.60
6.100set, USD51.00
7.200set, USD45.90
8.300set, USD41.30
EANï¼?
Product code: PSZ048
Trade name: PSZ048.For Mazda 3, Onella Low (2015-2018) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.20set, USD77.70
3.40set, USD67.00
4.60set, USD63.00
5.80set, USD56.60
6.100set, USD51.00
7.200set, USD45.90
8.300set, USD41.30
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Product code: PSZ049
Trade name: PSZ049.For Mazda 6, Attez (2014-2018) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.20set, USD77.70
3.40set, USD67.00
4.60set, USD63.00
5.80set, USD56.60
6.100set, USD51.00
7.200set, USD45.90
8.300set, USD41.30
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Product code: PS000182
Trade name: PS000182.FOR Mazda CX-5 (2017-2020) Wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 10W / 5W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product size: 26.5*17.5*10.2cm
Commodity weight: 0.53kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5. Support QC3.0 fast charging protocol.
6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blueis in charging, and redis in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD117.70
2.20set, USD70.60
3.40set, USD63.50
4.60set, USD57.20
5.80set, USD51.50
6.100set, USD46.30
7.200set, USD41.70
8.300set, USD37.50
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Commodity code: PSZ051B.
Trade name: PSZ051B.For Modern Lead device (2016-2020) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.20set, USD77.70
3.40set, USD67.00
4.60set, USD63.00
5.80set, USD56.60
6.100set, USD51.00
7.200set, USD45.90
8.300set, USD41.30
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
EANï¼?
Commodity code: PSZ052.
Trade name: PSZ052.For Hyundai ix45 (2013-2017) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.20set, USD77.70
3.40set, USD67.00
4.60set, USD63.00
5.80set, USD56.60
6.100set, USD51.00
7.200set, USD45.90
8.300set, USD41.30
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Commodity code: PSZ053.
Trade name: PSZ053.For Hyundai iX 25 (2015-2020) wireless vehicle charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headset, electronic watches, car keys and other electronic devices automatic induction charging. built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.20set, USD77.70
3.40set, USD67.00
4.60set, USD63.00
5.80set, USD56.60
6.100set, USD51.00
7.200set, USD45.90
8.300set, USD41.30
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Product code: PSZ054
Trade name: PSZ054.For Modern Santa Fe (2018) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.â?¥20set, USD77.70
3.â?¥40set, USD67.00
4.â?¥60set, USD63.00
5.â?¥80set, USD56.60
6.â?¥100set, USD51.00
7.â?¥200set, USD45.90
8.â?¥300set, USD41.30
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
EANï¼?
Commodity code: PSF4105B.
Trade name: PSF4105B.For Hyundai Sonata 9 (2015-2019) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.â?¥20set, USD77.70
3.â?¥40set, USD67.00
4.â?¥60set, USD63.00
5.â?¥80set, USD56.60
6.â?¥100set, USD51.00
7.â?¥200set, USD45.90
8.â?¥300set, USD41.30
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Product code: PSF4107
Trade name: PSF4107.For Hyundai Tucson (2015-2020) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.â?¥20set, USD77.70
3.â?¥40set, USD67.00
4.â?¥60set, USD63.00
5.â?¥80set, USD56.60
6.â?¥100set, USD51.00
7.â?¥200set, USD45.90
8.â?¥300set, USD41.30
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
EAN
Commodity code: PSF4108.
Trade name: PSF4108.For Hyundai IX35 (2018-2020) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20 + 70
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
EAN
Product code: PSZ055
Trade name: PSZ055.For Kia Sorento (high-equipped) (2015-2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20 + 70
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
EAN
Product code: PSZ056
Trade name: PSZ056.For Kia Yi Run (2018) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20 + 70
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless end] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
EAN
Product code: PSZ057
Trade name: PSZ057.For Kia Smart Run (2017-2018) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
EAN
Commodity code: PSZ064.
Trade name: PSZ064.For Kia KX 3 Ao run (2020) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
EAN
Product code: PSF4218
Trade name: PSF4218.For Kia Carnival (2015-2022) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headset, electronic watches, car keys and other electronic devices automatic induction charging. built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20 + 70
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price is USD121.44
2. 200set, USD72.86
3. 400set, USD65.57
4. 600set, USD59.01
5. 800set, USD53.11
Remarks: Free shipping charge for samples.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
Commodity code: PSF4220.
Trade name: PSF4220.For Kia KX5 sportage (2016-2020) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
EAN
Product code: PS000169
Trade name: PS000169.FOR Nissan Sylphy 14 generation (2020-2022) wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 10W / 5W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless end] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product Size: 23 * 19.9 * 3cm
Commodity weight: 0.38kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5. Support QC3.0 fast charging protocol.
6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blueis in charging, and redis in foreign body or abnormal.
EAN
Product code: PSZ075 (PSFC1042)
Trade name: PSZ075.FOR Nissan Sylphy (2020-2023) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Double coil / 15W motherboard + air cooling + USB / QC3.0 fast charge + power switch + 12V / DC integrated power supply
Product size: 26 * 22 * 7cm
Commodity weight: 0.70kg
18 PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5. Support QC3.0 fast charging protocol.
6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blueis in charging, and redis in foreign body or abnormal.
EAN
Product code: PS000159
Trade name: PS000159.FOR Nissan Teana (2019-2021) Wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 10W / 5W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless end] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product Size: 25 * 16.4 * 3cm
Commodity weight: 0.28kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5. Support QC3.0 fast charging protocol.
6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blueis in charging, and redis in foreign body or abnormal.
EAN
Commodity code: PSF3504B.
Trade name: PSF3504B.For Nissan Qijun (2019-2020) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price is USD121.44
2. 200set, USD72.86
3. 400set, USD65.57
4. 600set, USD59.01
5.800set, USD53.11
Remarks: Free shipping charge for samples.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
Product code: PSF3505
Trade name: PSF3505.For Nissan Sylphy (2016-2019) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
EAN
Product code: PS000163
Commodity name: PS000163. Nissan Qijun (2014-2021), Nissan Xiaoke (2016-2021) special multi-functional wireless vehicle charger
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Dual coil / 15W motherboard + (motherboard system / back of mobile phone) air cooling + wired (USB-A + Tpye-c) 27W super fast charge + power switch + 12V / DC car charge
Size of goods: 25.5 * 21 * 4.5cm
Commodity weight: 0.53kg
20 PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5. Support QC3.0 fast charging protocol.
6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blueis in charging, and redis in foreign body or abnormal.
EAN
Product code: PS000179
Trade name: PS000179.FOR Subaru Forester (2018-2022) Wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 10W / 5W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product size: 21.7*15*3.4cm
Commodity weight: 0.24kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5. Support QC3.0 fast charging protocol.
6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blueis in charging, and redis in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price is USD110.40
2. 200set, USD66.24
3. 400set, USD59.62
4. 600set, USD53.66
5. 800set, USD48.29
Remarks: Free shipping charge for samples.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
Product code: PS000199
Trade name: PS000199.FOR Subaru XV (2018-2022) wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W / 10W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product Size: 21 * 18 * 4cm
Commodity weight: 0.27kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5. Support QC3.0 fast charging protocol.
6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blueis in charging, and redis in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price is USD110.40
2. 200set, USD66.24
3. 400set, USD59.62
4. 600set, USD53.66
5. 800set, USD48.29
Remarks: Free shipping charge for samples.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
Commodity code: PSZ0196.
Trade name: PSZ0196.For Ford Mustang (2015-2021) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 10W / 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product Size: 30 * 20 * 8 cm
Commodity weight: 0.60kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
EAN
Product code: PSF2402
Trade name: PSF2402.For Ford Sharp world (2015-2018) wireless vehicle charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
EAN
Product code: PS000146
Trade name: PS000146.FOR Ford F150 (2015-2019) Wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 10W / 5W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product size: 38 * 17 * 9cm
Commodity weight: 0.59kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5. Support QC3.0 fast charging protocol.
6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blueis in charging, and redis in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price is USD110.40
2. 200set, USD66.24
3 400set, USD59.62
4. 600set, USD53.66
5. 800set, USD48.29
Remarks: Free shipping charge for samples.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business
EAN
Product code: PS000162
Trade name: PS000162.FOR Ford Explorer (2020-2021) Wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 10W / 5W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless end] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product Size: 24 * 14.5 * 3cm
Commodity weight: 0.26kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5. Support QC3.0 fast charging protocol.
6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blueis in charging, and redis in foreign body or abnormal.
EANï¼?
Product code: PSZ306
Trade name: PSZ306.For Porsche Cayenne (2018-2020) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Product code: PSZ307A
Trade name: PSZ307A.For Porsche MACAN (2014-2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
EANï¼?
Product code: PSZ307B
Trade name: PSZ307B.For Porsche MACAN (2014-2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 10W / 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product Size: 30 * 20 * 8 cm
Commodity weight: 0.60kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
EANï¼?
Product code: PSZ313
Trade name: PSZ313.For Jeep Free Light LIMITED (2016-2019) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Emission power: 10W / 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product Size: 30 * 20 * 8 cm
Commodity weight: 0.60kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
EANï¼?
Product code: PSF1119
Trade name: PSF1119.For GM Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Emission power: 10W / 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product Size: 30 * 20 * 8 cm
Commodity weight: 0.60kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
PSF0716. Portable / wall-mounted 1-phase AC electric vehicle charger. Suitable for US, EU, JP, UK and other international electrical standards AC240V 15%,16A,3.5kW household type 2 electric vehicle intelligent charging station.
technical parameter:
Output power: AC240V / 50 HZv;
Output power: 16A,3.5KW; four gear adjustable (16A / 13A / 10A / 6A);
Charging reservation time: 2H / 4H / 6H / 8H;
Leakage protection current: 23 mA;
Leakage protection action time: 32ms;
Standby power consumption: 4W;
Cable length: random standard with 5m. Support to purchase 10m, 15m;
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU Plug / UK Plug / CEE Plug;
Support communication: APP,OCPP1.6J, RS-485, LAN, 4G, RFID card;
Working life of connector machinery: 10000 times (no-load plugging);
User interface and control: APP control, button control, card control;
Key surface index: charging time, real-time current / voltage / power supply / connection / charging / fault;
Charge Gun SAE J1772/IEC 62196-2
Product certification: 3C, CE, ROHS, REACH, cULus.
Product features:
1.APP control:
Set the current: When the current grid is overloaded, you can set the current
Control to stop and start: Control your phone to stop and start, and you can control it anywhere
Charging reservation: If you want an electric car to charge at night, charging reservations through the APP is a good choice, very convenient
Record: You can view the charging record through the APP at any time
2. Load balance management:
Limit the total charging load can protect the local grid
Sharing the charging load can reduce the cost of the power connection required
Choose the open CT (current transformer) as the current sensor, there is no physical wiring between the equipment, with the advantages of open and closed installation, convenient and fast wiring, and no additional infrastructure or installation cost
3. Specifications:
The body material adopts thermoplastic (insulator combustible UL94 VO) special integral molding, which is suitable for indoor and outdoor safety
Highlight LCD display current, voltage, power consumption, time, etc
OEM or ODM available: logo, brand, design, size, color, function, fault information, etc., support for customization
Multi-function installation wall installation or base application
4. Protection:
High-quality, safe and reliable use of production design standards: overvoltage, overvoltage, overload, short circuit, leakage, grounding, overtemperature, surge and other protection
Multi-function installation wall installation or base application
Step Price (FOB):
1. Sample unit price is USD304.54
2. 200set, USD182.72
3. 400set, USD164.45
4. 600set, USD148.00
5. 800set, USD133.20
Remarks: Free shipping charge for samples.
PS10132. Wall-mounted / floor-mounted-type 1-phase AC electric vehicle charger. Suitable for US, EU, JP, UK and other international electrical standards AC240V± 15%, 32A, 7kw household type 2 electric vehicle intelligent charging station.
technical parameter:
Input rating: 240V ± 15%;
Output rating: 0-32A; 7kw;
Rated frequency: 50 / 60 Hz;
Connector type: IEC 62196-2 / SAE J1772;
Charig controls: Plug and play, RFID card, applications;
Ocpp Protocol (optional): 1.6 or 2.0.1;
Communication: WiFi, Bluetooth;
Working life of connector machinery: 10000 times (no-load plugging);
Charging cable length: random standard 5m. Support to purchase 10m, 15m;
Quality assurance: 12 months;
Waterproof grade: IP65;
Product Certification: 3C, CE, ROHS, REACH.
Product features:
1. The APP control of the
Set the current: when the power grid is overloaded, you can set the current;
Control the stop and start: control the stop and start of your phone, you can control it anywhere;
Reservation charging: If you want an electric car to charge at night, booking charging through the APP is a good choice, very convenient;
Record: You can view the charge record through the APP at any time;
This is the best choice for you into the domestic market.
2. Load balance management:
Limit the total charging load can protect the local power grid;
Sharing the charging load can reduce the required cost of power connection;
Choose the open CT (current transformer) as the current sensor, and there is no physical wiring between the equipment, with the advantages of open and closed installation, convenient and fast wiring, and no additional infrastructure or installation cost.
3. Specifications
Material: the front panel is tempered glass, with the advantages of scratch prevention and high-quality visual effect. The rear cover is made of high quality metal plate, special integral molding, suitable for indoor and outdoor safety.
OEM or ODM available: logo, brand, design, size, color, function, fault information, etc., support for customization;
3.5-inch highlight LCD screen: display real-time charging current, voltage, power consumption, time;
Multi-function installation wall installation or base application.
4. Protect
High quality, safe and reliable use of production design standards: overvoltage protection, overvoltage protection, overload protection, short circuit protection, leakage protection, grounding protection, over temperature protection, surge protection, etc.
Step Price (FOB):
1. Sample unit price is USD872.43
2. 00set, USD523.46
3. 400set, USD471.11
4. 600set, USD424.00
5. 800set, USD381.60
More categories of commodity specifications and preferential policies are welcome to letter message consulting businesses.
PS10316. Wall-mounted / landing-type 3-phase AC electric vehicle charger. Suitable for US, EU, JP, UK and other international electrical standards AC380V 15%, 32A, 11kw household type 2 electric vehicle intelligent charging station.
technical parameter:
Input rating: 380V ± 15%;
Output rating: 0-32A, 11kw
Rated frequency: 50 / 60 Hz;
Power Wiring 3wire-live ,neutral plus PE
Connector type: IEC 62196-2 / SAE J1772;
Charig control: APP, RFID Card, Button;
Ocpp Protocol (optional): 1.6 or 2.0.1;
External Communication LAN(RJ-45) and WIFI
Working life of connector machinery: 10000 times (no-load plugging);
Charging cable length: random standard standard 5m. Support to purchase 10m, 15m;
Quality assurance: 12 months;
Waterproof grade: IP65;
Product Certification: 3C, CE, ROHS, REACH.
Product features:
1. The APP control of the
Set the current: when the power grid is overloaded, you can set the current;
Control the stop and start: control the stop and start of your phone, you can control it anywhere;
Reservation charging: If you want an electric car to charge at night, booking charging through the APP is a good choice, very convenient;
Record: You can view the charge record through the APP at any time;
This is the best choice for you into the domestic market.
2. Load balance management:
Limit the total charging load can protect the local power grid;
Sharing the charging load can reduce the required cost of power connection;
Choose the open CT (current transformer) as the current sensor, and there is no physical wiring between the equipment, with the advantages of open and closed installation, convenient and fast wiring, and no additional infrastructure or installation cost.
3. Specifications
Material: the front panel is tempered glass, with the advantages of scratch prevention and high-quality visual effect. The rear cover is made of high-quality metal plate, special integral molding, suitable for indoor and outdoor safety.
OEM or ODM available: logo, brand, design, size, color, function, fault information, etc., support for customization;
3.5-inch highlight LCD screen: display real-time charging current, voltage, power consumption, time;
Multi-function installation wall installation or base application.
4. Protect
High quality, safe and reliable use of production design standards: overvoltage protection, overvoltage protection, overload protection, short circuit protection, leakage protection, grounding protection, over temperature protection, surge protection, etc.
Step Price (FOB):
1. Sample unit price is USD944.85
2. 200set, USD566.91
3. 400set, USD510.22
4. 600set, USD459.20
5. 800set, USD413.30
More categories of commodity specifications and preferential policies are welcome to letter message consulting business.
PS3W332. Wall-mounted / landing-type 3-phase electric vehicle charger. Suitable for US, EU, JP, UK and other international electrical standards AC380V, 32A, 22kW household type 2 electric vehicle intelligent charging station
technical parameter:
Input rating: 380V ± 15%;
Output rating: 32A, 22kw;
Rated frequency: 50 / 60 Hz;
Power supply wiring: 3 wire-L1, L2 plus grounding; 3 wire live, neutral plus PE;
Connector type: SAE J1772 (type 1); IEC 62196-2 (type 2);
Charig controls: Plug and play, RFID card, applications;
Working life of connector machinery: 10000 times (no-load plugging);
Charging cable length: random standard 5m. Support to purchase 10m, 15m;
Quality assurance: 12 months;
Waterproof grade: IP54;
Fee standard: IEC 62196-2, J1772;
Product certification: 3C, CE, ROHS.
Product features:
1. The APP control of the
Set the current: when the power grid is overloaded, you can set the current;
Control the stop and start: control the stop and start of your phone, you can control it anywhere;
Reservation charging: If you want an electric car to charge at night, booking charging through the APP is a good choice, very convenient;
Record: You can view the charge record through the APP at any time;
This is the best choice for you into the domestic market.
2. Load balance management:
Limit the total charging load can protect the local power grid;
Sharing the charging load can reduce the required cost of power connection;
Choose the open CT (current transformer) as the current sensor, there is no physical wiring between the equipment, with the advantages of open and closed installation, convenient and fast wiring, and no additional infrastructure or installation cost.
3. Specifications
Material: the front panel is tempered glass, with the advantages of scratch prevention and high quality visual effect. The rear cover is made of high quality metal plate, special integral molding, suitable for indoor and outdoor safety.
OEM or ODM available: logo, brand, design, size, color, function, fault information, etc., support for customization;
3-inch highlight LCD screen: display real-time charging current, voltage, power consumption, time;
Multi-function installation wall installation or base application.
4. Protect
High quality, safe and reliable use of production design standards: overvoltage protection, overvoltage protection, overload protection, short circuit protection, leakage protection, grounding protection, over temperature protection, surge protection, etc.
Step Price (FOB):
1. Sample unit price is USD1061.00
2. 200set, USD636.62
3. 400set, USD572.96
4. 600set, USD515.66
5. 800set, USD464.10
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
PS3W132. Wall-mounted / landing-type 1-phase electric vehicle charger. Suitable for US, EU, JP, UK and other international electrical standards AC220V, 32A, 7 kW household type 2 electric vehicle intelligent charging station.
technical parameter:
Input rating: 220V ± 15%;
Output rating: 0-32A, 7kw;
Rated frequency: 50 / 60 Hz;
Connector type: IEC 62196-2 / SAE J1772;
Charig controls: Plug and play, RFID card, applications;
Working life of connector machinery: 10000 times (no-load plugging);
Charging cable length: random standard 5m. Support to purchase 10m, 15m;
Quality assurance: 12 months;
Waterproof grade: IP54;
Fee standard: IEC 62196-2, J1772;
Product Certification: 3C, CE, ROHS, REACH.
Product features:
1. The APP control of the
Set the current: when the power grid is overloaded, you can set the current;
Control the stop and start: control the stop and start of your phone, you can control it anywhere;
Reservation charging: If you want an electric car to charge at night, booking charging through the APP is a good choice, very convenient;
Record: You can view the charge record through the APP at any time;
This is the best choice for you into the domestic market.
2. Load balance management:
Limit the total charging load can protect the local power grid;
Sharing the charging load can reduce the required cost of power connection;
Choose the open CT (current transformer) as the current sensor, and there is no physical wiring between the equipment, with the advantages of open and closed installation, convenient and fast wiring, and no additional infrastructure or installation cost.
3. Specifications
Material: the front panel is tempered glass, with the advantages of scratch prevention and a high-quality visual effect. The rear cover is made of high-quality metal plate, and special integral molding, suitable for indoor and outdoor safety.
OEM or ODM available: logo, brand, design, size, color, function, fault information, etc., support for customization;
3-inch highlight LCD screen: display real-time charging current, voltage, power consumption, time;
Multi-function installation wall installation or base application.
4. Protect
High quality, safe and reliable use of production design standards: overvoltage protection, overvoltage protection, overload protection, short circuit protection, leakage protection, grounding protection, over temperature protection, surge protection, etc.
Step Price (FOB):
1. Sample unit price is USD912.87
2. 200set, USD547.70
3. 400set, USD492.95
4. 600set, USD443.66
5. 800set, USD399.39
More categories of commodity specifications and preferential policies are welcome to letter message consulting businesses.
PS3P132U. Wall-mounted / landing-type 1-phase electric vehicle charger. Suitable for US, EU, JP, UK and other international electrical standards AC240V 15%, 32A, 7 kW household type 2 electric vehicle intelligent charging station.
technical parameter:
Input the rating value: 240V ±15%,3.5kw 7kw 10kw;
Output rating: 0-32A, 7kw;
Rated frequency: 50 / 60 Hz;
Connector type: IEC 62196-2 / SAE J1772;
Charig controls: Plug and play, RFID card, applications;
Working life of connector machinery: 10000 times (no-load plugging);
Charging cable length: random standard 5m. Support to purchase 10m, 15m;
Quality assurance: 12 months;
Waterproof grade: IP54;
Fee standard: IEC 62196-2, J1772;
Product Certification: 3C, CE, ROHS, REACH.
Product features:
1. The APP control of the
Set the current: when the power grid is overloaded, you can set the current;
Control the stop and start: control the stop and start of your phone, you can control it anywhere;
Reservation charging: If you want an electric car to charge at night, booking charging through the APP is a good choice, very convenient;
Record: You can view the charge record through the APP at any time;
This is the best choice for you into the domestic market.
2. Load balance management:
Limit the total charging load can protect the local power grid;
Sharing the charging load can reduce the required cost of power connection;
Choose the open CT (current transformer) as the current sensor, and there is no physical wiring between the equipment, with the advantages of open and closed installation, convenient and fast wiring, and no additional infrastructure or installation cost.
3. Specifications
Material: the front panel is tempered glass, with the advantages of scratch prevention and high quality visual effect. The rear cover is made of high quality metal plate, special integral molding, suitable for indoor and outdoor safety.
OEM or ODM available: logo, brand, design, size, color, function, fault information, etc., support for customization;
3-inch highlight LCD screen: display real-time charging current, voltage, power consumption, time;
Multi-function installation wall installation or base application.
4. Protect
High quality, safe and reliable use of production design standards: overvoltage protection, overvoltage protection, overload protection, short circuit protection, leakage protection, grounding protection, over temperature protection, surge protection, etc.
Step Price (FOB):
1. Sample unit price is USD739.71
2.200set, USD443.83
3. 400set, USD399.45
4. 600set, USD3595.10
5. 800set, USD323.56
More categories of commodity specifications and preferential policies are welcome to letter message consulting businesses.
PS3P140U. Wall-mounted / landing-type 1-phase AC electric vehicle charger. Suitable for US, EU, JP, UK and other international electrical standards AC240V ,16A,11kw household type 2 electric vehicle intelligent charging station.
technical parameter:
Input rating: 240V ± 15%,11kw;
Output rating: 0-16A;
Rated frequency: 50 / 60 Hz;
Power Wiring 3wire-live ,neutral plus PE
Connector type: IEC 62196-2 / SAE J1772;
Charig control: APP, RFID Card, Button;
Ocpp Protocol (optional): 1.6 or 2.0.1;
External Communication LAN(RJ-45) and WIFI
Storage Temperature-40 to 75C (-40 to 167F) ambient
Operating Temperature-30 to 55C (-22 to 131F) ambient
Working life of connector machinery: 10000 times (no-load plugging);
Charging cable length: random standard 5m. Support to purchase 10m, 15m;
Quality assurance: 12 months;
Waterproof grade: IP65;
Product Certification: 3C, CE, ROHS, REACH.
Product features:
1. The APP control of the
Set the current: when the power grid is overloaded, you can set the current;
Control the stop and start: control the stop and start of your phone, you can control it anywhere;
Reservation charging: If you want an electric car to charge at night, booking charging through the APP is a good choice, very convenient;
Record: You can view the charge record through the APP at any time;
This is the best choice for you into the domestic market.
2. Load balance management:
Limit the total charging load can protect the local power grid;
Sharing the charging load can reduce the required cost of power connection;
Choose the open CT (current transformer) as the current sensor, and there is no physical wiring between the equipment, with the advantages of open and closed installation, convenient and fast wiring, and no additional infrastructure or installation cost.
3. Specifications
Material: the front panel is tempered glass, with the advantages of scratch prevention and a high-quality visual effect. The rear cover is made of high-quality metal plate, and special integral molding, suitable for indoor and outdoor safety.
OEM or ODM available: logo, brand, design, size, color, function, fault information, etc., support for customization;
3.5-inch highlight LCD screen: display real-time charging current, voltage, power consumption, time;
Multi-function installation wall installation or base application.
4. Protect
High quality, safe and reliable use of production design standards: overvoltage protection, overvoltage protection, overload protection, short circuit protection, leakage protection, grounding protection, over temperature protection, surge protection, etc.
Step Price (FOB):
1. Sample unit price is USD739.71
2. 200set, USD443.83
3. 400set, USD399.45
4. 600set, USD3595.10
5. 800set, USD323.56
More categories of commodity specifications and preferential policies are welcome to letter message consulting business.
PS10332. Wall-mounted / landing-type 3-phase AC electric vehicle charger. Suitable for US, EU, JP, UK and other international electrical standards AC380V, 32A, 22kw household type 2 electric vehicle intelligent charging station.
technical parameter:
Input rating: 380V ± 15%;
Output rating: 0-32A, 22 kW;
Rated frequency: 50 / 60 Hz;
Power Wiring 3wire-live ,neutral plus PE
Connector type: IEC 62196-2 / SAE J1772;
Charig control: APP, RFID Card, Button;
Ocpp Protocol (optional): 1.6 or 2.0.1;
External Communication LAN(RJ-45) and WIFI
Working life of connector machinery: 10000 times (no-load plugging);
Charging cable length: random standard 5m. Support to purchase 10m, 15m;
Quality assurance: 12 months;
Waterproof grade: IP65;
Product Certification: 3C, CE, ROHS, REACH.
Product features:
1. The APP control of the
Set the current: when the power grid is overloaded, you can set the current;
Control the stop and start: control the stop and start of your phone, you can control it anywhere;
Reservation charging: If you want an electric car to charge at night, booking charging through the APP is a good choice, very convenient;
Record: You can view the charge record through the APP at any time;
This is the best choice for you into the domestic market.
2. Load balance management:
â?³ Limit the total charging load can protect the local power grid;
Sharing the charging load can reduce the required cost of power connection;
Choose the open CT (current transformer) as the current sensor, there is no physical wiring between the equipment, with the advantages of open and closed installation, convenient and fast wiring, and no additional infrastructure or installation cost.
3. Specifications
Material: the front panel is tempered glass, with the advantages of scratch prevention and high quality visual effect. The rear cover is made of high quality metal plate, special integral molding, suitable for indoor and outdoor safety.
OEM or ODM available: logo, brand, design, size, color, function, fault information, etc., support for customization;
3.5-inch highlight LCD screen: display real-time charging current, voltage, power consumption, time;
Multi-function installation wall installation or base application.
4. Protect
High quality, safe and reliable use of production design standards: overvoltage protection, overvoltage protection, overload protection, short circuit protection, leakage protection, grounding protection, over temperature protection, surge protection, etc.
Step Price (FOB):
1. Sample unit price is USD1017.65
2. 200set, USD610.60
3. 400set, USD549.53
4. 600set, USD494.60
5. 800set, USD445.15
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
PSTJT2. Portable / wall-mounted 1-phase AC electric vehicle charger. Suitable for US, EU, JP, UK and other international electrical standards AC240V�± 15%,16A,3.5kW household type 1 / 2 electric vehicle intelligent charging station.
technical parameter:
Output power: AC16A / 22V / 50 HZ;
Rated input voltage: 100~245V AC / 1 phase;
Output power: 16 A @ 220 Vac;
Operating temperature: -20~50C;
Charging booking time: 2H / 4H / 6H / 8H; 16A four-gear adjustable (16A / 13A / 10A / 6A);
Cable length: random standard equipment 7.5m. Support purchasing 10m, 15m;
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU Plug / UK Plug / CEE Plug
Charge Gun SAE J1772/1EC 62196
Support communication: APP,OCPP1.6J, RS-485, LAN, 4G, RFID card;
Working life of connector machinery: 10000 times (no-load plugging);
User interface and control: APP control, button control, card control;
Key surface index: charging time, real-time current / voltage / power supply / connection / charging / fault;
Product certification: 3C, CE, ROHS, REACH, cULus.
Commodity features:
Smart charger products include type 1, type 2, single phase; 3.5 kW, 7 kW, 10 kW, 11 kW, 22 kW; 16A four-gear adjustable (16A / 13A / 10A / 6A); 32A four-gear adjustable (32A / 24A / 16A / 10A);
DC / ac smart charger covers BD D, NIO, XPENG, ideal car, AION, ZEEKR, audi, BMW, Chevrolet, Mercedes, porsche, Volkswagen, Volvo, Tesla, Citroen, Fisk, ford, mitsubishi, nissan, Peugeot, Renault, Smith, tower, Toyota, Honda, prius, chery, walker, most countries of the electric car market family (residential) and commercial purposes;
Safety design / multiple protection: underpower protection, overvoltage protection, overload protection, overcurrent protection, overwet protection, leakage protection, grounding protection, lightning protection, electrostatic protection, flame retardant protection;
Waterproof grade: IP65;
OLED screen: display the charging current, voltage, output energy, charging time, status information, fault information, etc.;
Body material: thermoplasticity (insulator flammability UL94 VO);
Quality assurance: 12 months;
Device color: the support for customization.
Step Price (FOB):
1. Sample unit price is USD304.54
2. 200set, USD182.72
3. 400set, USD164.45
4. 600set, USD148.00
5. 800set, USD133.20
PSL180S. Floor-type 3-phase 5-line DC ev charger. Suitable for US, EU, JP, UK and other international electrical standards 380V 15%, 180KW commercial type 2 electric vehicle intelligent charging station.
technical parameter:
Input rating: 380V 15%;
Rated power: 180KW;
Output voltage range: 150-1000VDC;
Output current range: 0-250A;
Connector type: NEMA 6-20P / 5-15P, NEMA 6-50P / 14-50P;
Support communication: APP, RFID Card, Button;
External Communication 3G\4G LAN(RJ-45) and WIFI
Connector: 2 sets;
Cable length: random standard with 5m. Support to purchase 10m, 15m;
Operating temperature: -25 C~ + 50 C;
Operating humidity: 5%~98%;
Key surface index: charging time, real-time current / voltage / power supply / connection / charging / fault; 7-inch highlight color LCD screen;
Working life of connector machinery: 10000 times (no-load plugging);
Quality assurance: 12 months;
Waterproof grade: IP54;
Product certification: 3C, CE, ROHS, REACH, cULus.
Commodity features:
Smart charger product 3-phase; DC 380V 15%;
DC / ac smart charger covers byd, nio, xping, ideal car, aion, ZEEKR, audi, BMW, Chevrolet, Mercedes, porsche, Volkswagen, Volvo, Tesla, Citroen, fish, ford, mitsubishi, nissan, Peugeot, Renault, Smith, tower, Toyota, Honda, prius, chery, walker most countries such as electric car market family (residential) and commercial purposes;
Safety design / multiple protection: underpower protection, overvoltage protection, overload protection, overcurrent protection, overwet protection, leakage protection, grounding protection, lightning protection, electrostatic protection, flame retardant protection;
Waterproof grade: IP54;
Noise control: 60dB;
Human-machine interface: 7-inch LCD color display screen touch screen, LED indicator light;
OLED screen: display the charging current, voltage, output energy, charging time, status information, fault information, etc.;
Body materials: metal;
Quality assurance: 12 months;
Device selection: support OEM customization
Step Price (FOB):
1. Sample unit price,USD44625.00
2. 200set, USD26775.00
3. 400set, USD24097.50
4. 600set, USD21687.80
5. 800set, USD19519.00
PSL60S. Floor-type 3-phase 5-line DC ev charger. It is applicable to US, EU, JP, UK and other international electrical standards of 380V - 15%, 60KW commercial type 2 electric vehicle intelligent charging station.
technical parameter:
Input rating: 380V ± 15%;
Rated power: 60KW;
Output voltage range: 150-1000VDC;
Output current range: 0-250A;
Connector type: NEMA 6-20P / 5-15P, NEMA 6-50P / 14-50P;
Support communication: APP, RFID Card, Button;
External Communication 3G\4G LAN(RJ-45) and WIFI
Connector: 2 sets;
Cable length: random standard with 5m. Support to purchase 10m, 15m;
Operating temperature: -25C~ + 50C;
Operating humidity: 5%~98%;
Key surface index: charging time, real-time current / voltage / power supply / connection / charging / fault; 7-inch highlight color LCD screen;
Working life of connector machinery: 10000 times (no-load plugging);
Quality assurance: 12 months;
Waterproof grade: IP54;
Product certification: 3C, CE, ROHS, REACH, cULus.
Commodity features:
Smart charger product 3-phase; DC 380V± 15%;
DC / ac smart charger covers byd, nio, xping, ideal car, aion, ZEEKR, audi, BMW, Chevrolet, Mercedes, porsche, Volkswagen, Volvo, Tesla, Citroen, fish, ford, mitsubishi, nissan, Peugeot, Renault, Smith, tower, Toyota, Honda, prius, chery, walker most countries such as electric car market family (residential) and commercial purposes;
Safety design / multiple protection: underpower protection, overvoltage protection, overload protection, overcurrent protection, overwet protection, leakage protection, grounding protection, lightning protection, electrostatic protection, flame retardant protection;
Waterproof grade: IP54;
Noise control: 60dB;
Human-machine interface: 7-inch LCD color display screen touch screen, LED indicator light;
OLED screen: display the charging current, voltage, output energy, charging time, status information, fault information, etc.;
Body materials: metal;
Quality assurance: 12 months;
Device selection: support OEM customization.
Step Price (FOB):
1. Sample unit price,USD27825.00
2. 200set, USD16695.00
3. 400set, USD15025.50
4. 600set, USD13523.00
5. 800set, USD12170.70
PS3505E07. Portable 1-phase AC household type 2 electric vehicle smart charger. Suitable for US, EU, JP, UK and other international electrical standards, AC240V, 32A, 7kW household type 1 / 2 electric vehicle intelligent charging station.
technical parameter:
Product code: PS3505E07
Trade name: Portable / wall-mounted 1-phase AC household type 2 electric vehicle smart charger
Commodities applicable to: US, EU, JP, UK and other international electrical standards
Input rating: 250V 15%
Output rating: 32A, 7kw
Pressure resistance 2500VAC1 min no breakdown
Insulation 1,000 MQ
Insertion force <100N
Lock retention force >200N
Frequency range: 50 Hz ± 1%
Operating temperature: -35C~ + 75C
Operating humidity: 5%~98%
Cable length: random standard 7.5m. Support to purchase 10m, 15m
Cable connector: 1set; SAE J1772, EC61851-1, IEC 62196-2
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU Plug / UK Plug / CEE Plug
Support communication: APP,OCPP1.6J, RS-485, LAN, 4G, RFID card
Connector mechanical working life: 10,000 times
User interface and control: APP control, button control, card control
Key surface indicators: charging time, real-time current / voltage / power / supply / connection / charge / fault
Quality assurance: 12 months
Waterproof grade: IP65
Noise control: 60 dB
Product certification: 3C, CE, ROHS, REACH
Step Price (FOB):
1. Unit price is USD405.00
2. 200set, USD243.00
3. 400set, USD218.70
4. 600set, USD196.80
5. 800set, USD177.20
PS3505E03. Portable 1-phase AC household type 2 electric vehicle smart charger. Suitable for US, EU, JP, UK and other international electrical standards, AC240V 15%,16A,3.5kW household type 1 / 2 electric vehicle intelligent charging station.
technical parameter:
Product code: PS3505E03
Trade name: Portable / wall-mounted 1-phase AC household type 2 electric vehicle smart charger
Commodities applicable to: US, EU, JP, UK and other international electrical standards
Input rating: 250V 15%
Output rating: 16A,3.5kw
Pressure resistance 2500VAC1 min no breakdown
Insulation 1,000 MQ
Insertion force <100N
Lock retention force >200N
Frequency range: 50 Hz ± 1%
Operating temperature: -35�°C~ + 75�°C
Operating humidity: 5%~98%
Cable length: random standard 7.5m. Support to purchase 10m, 15m
Cable connector: 1set; SAE J1772, EC61851-1, IEC 62196-2
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU Plug / UK Plug / CEE Plug
Support communication: APP,OCPP1.6J, RS-485, LAN, 4G, RFID card
Connector mechanical working life: 10,000 times
User interface and control: APP control, button control, card control
Key surface indicators: charging time, real-time current / voltage / power / supply / connection / charge / fault
Quality assurance: 12 months
Waterproof grade: IP65
Noise control: 60 dB
Product certification: 3C, CE, ROHS, REACH
Step Price (FOB):
1. Unit price is USD387.00
2. 200set, USD232.20
3. 400set, USD208.99
4. 600set, USD188.10
5. 800set, USD169.30
Technical parameter:
Product code: PS2201E22
Trade name: PS2201E22. Wall-mounted / column type AC230V; 16A; 22KW household type 2 electric vehicle intelligent charger.
Commodities applicable to: US, EU, JP, UK and other international electrical standards
Enter the wiring scheme: 3P + N + PE
Input voltage: 230VAC soil 10%, 400VAC 10% L2
Output voltage: 230VAC soil 10%, 400VAC 10% L2
Output rating: 16A, 22kw
Rated frequency: 50 Hzor-60Hz
Operating temperature: -30 C~ + 50 C
Operating humidity: 5%~98%
Cable length: random standard with 5m. Support to purchase 10m, 15m
Cable connectors: 2set; SAE J1772, EC61851-1, IEC 62196-2
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU plug / UK plug / CEE plug
Support communication: APP,OCPP1.6J, RS-485, LAN, 4G, RFID card
Charging mode: APP, plug and charging (optional)
Connector mechanical working life: 10,000 times
User interface and control: APP control, button control, card control
Key surface indicator: charging time, instant current / voltage / power / connection / charging / fault; LCD screen 4.3-inch touch color screen (optional)
Quality assurance: 12 months
Waterproof grade: IP65
Noise control: 60 dB
Product certification: 3C, CE, ROHS, REACH
Step Price (FOB):
1. Sample unit price,USD1575.00
2. 10set, USD945.00
3. 20set, USD850.50
4. 30set, USD765.50
5. 40set, USD688.90
technical parameter:
Product code: PS2201E11
Trade name: PS2201E11.Wall-mounted / column type AC230V; 16A; 11KW household type 2 electric vehicle smart charger.
Commodities applicable to: US, EU, JP, UK and other international electrical standards
Input the wiring scheme: 1P + N + PE
Input voltage: 230VAC soil 10%, 400VAC 10% L2
Output voltage: 230VAC soil 10%, 400VAC 10% L2
Output rating: 16A, 11kw
Rated frequency: 50 Hzor-60Hz
Operating temperature: -30 C~ + 50 C
Operating humidity: 5%~98%
Cable length: random standard with 5m. Support to purchase 10m, 15m
Cable connector: 1set; SAE J1772, EC61851-1, IEC 62196-2
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU plug / UK plug / CEE plug
Support communication: APP,OCPP1.6J, RS-485, LAN, 4G, RFID card
Charging mode: APP, plug and charging (optional)
Connector mechanical working life: 10,000 times
User interface and control: APP control, button control, card control
Key surface indicator: charging time, instant current / voltage / power / connection / charging / fault; LCD screen 4.3-inch touch color screen (optional)
Quality assurance: 12 months
Waterproof grade: IP65
Noise control: 60 dB
Product certification: 3C, CE, ROHS, REACH
Step Price (FOB):
1. Sample unit price,USD1440.00
2. 10set, USD864.00
3. 20set, USD777.60
4. 30set, USD699.80
5. 40set, USD629.90
PSF0716B. Portable / wall-mounted 1-phase AC electric vehicle charger. Suitable for US, EU, JP, UK and other international electrical standards AC240V+15%, 32A, 7kW household type 2 electric vehicle intelligent charging station.
technical parameter:
Output power: AC240V / 50 HZv;
Output power: 32A, 7KW; 32A four-gear adjustable (32A / 24A / 16A / 10A);
Charging reservation time: 2H / 4H / 6H / 8H;
Leakage protection current: 23 mA;
Leakage protection action time: 32ms;
Standby power consumption: 4W;
Cable length: random standard with 5m. Support to purchase 10m, 15m;
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU Plug / UK Plug / CEE Plug;
Support communication: APP,OCPP1.6J, RS-485, LAN, 4G, RFID card;
Working life of connector machinery: 10000 times (no-load plugging);
User interface and control: APP control, button control, card control;
Key surface index: charging time, real-time current / voltage / power supply / connection / charging / fault;
Charge Gunï¼?SAE J1772/IEC 62196-2ï¼?
Product certification: 3C, CE, ROHS, REACH, cULus.
Step Price (FOB):
1. Sample unit price is USD367.50
2. 200set, USD220.50
3. 400set, USD198.45
4. 600set, USD178.60
5. 800set, USD160.75
PS080YBO3 / 5H. Floor-type 2set connector 3-phase DC EV charger. Suitable for US, EU, JP, UK and other international electrical standards 80kW commercial type 2 electric vehicle intelligent charging station.
technical parameter:
Output voltage: 200-750 V DC;
Input voltage: DC380V+ 15%;
Rated current: 32A + 32A;
Rated power: 80kW;
Frequency range: 45-65 Hz;
Single-gun output current range: 200V-500V;
Output voltage: 0-120
Connector: 2 sets;
Operating temperature: -25C~ + 50C;
Operating humidity: 5%~98%;
Cable length: random standard with 5m. Support to purchase 10m, 15m;
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU plug / UK plug / CEE plug
Standard: EC61851-1:2017, ICE62196-2:2016;
Support communication: APP,ocpp1.6j, rs-485, LAN, 4g, rfid card;
Working life of connector machinery: 10000 times (no-load plugging);
Key surface index: charging time, real-time current / voltage / power supply / connection / charging / fault;
Product certification: 3C, CE, ROHS, REACH, cULus.
Step Price (FOB):
1. Sample unit price, USD33713.24
2. 200set, USD20227.94
3. 400set, USD18205.15
4. 600set, USD16384.64
5. 800set, USD14746.18
PSTJT2B. Portable / wall-mounted 1-phase AC electric vehicle charger. Suitable for US, EU, JP, UK and other international electrical standards AC240V�± 15%, 32A, 7kW household type 1 / 2 electric vehicle intelligent charging station.
Step Price (FOB):
1. Sample unit price is USD367.50
2.200set, USD220.50
3.400set, USD198.45
4.600set, USD178.60
5.800set, USD160.75
EAN
Commodity code: PSF1123.
Trade name: PSF1123. For Suzuki Across (2021-2023) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W / 10W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product Size: 30 * 20 * 8 cm
Commodity weight: 0.60kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5. Support QC3.0 fast charging protocol.
6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?6975913481014
Commodity code: PS003000100.
Trade name: PS003000100.FOR Honda civic10 generation Civic (2016-2021) wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W / 10W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product size: 23*20*3.5cm
Commodity weight: 0.38kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5. Support QC3.0 fast charging protocol.
6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Commodity code: PSZ021.
Trade name: PSZ021. For Honda Alisson (2016-2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN/ctn
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable docking.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5.USB fast charging output interface, which supports QC3.0 fast charging protocol.
6.10W Very large coil, FOB foreign body detection, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
Step Price (FOB):
1. Sample unit price USD129.40
2.20set, USD77.70
3.40set, USD67.00
4.60set, USD63.00
5.80set, USD56.60
6.100set, USD51.00
7.200set, USD45.90
8.300set, USD41.30
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼? 6975913481069
Commodity code: PSZ312.
Trade name: PSZ312.For Honda Civic (2017-2020) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price is USD121.44
2. 200set, USD72.86
3. 400set, USD65.57
4. 600set, USD59.01
5. 800set, USD53.11
Remarks: Free shipping charge for samples.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Product code: PS032S (PSFC1031).
Trade name: PS032S.FOR Volkswagen Tuang, Tuang X,
Verjan, Hui, Passat (2017-2022) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Double coil / 15W motherboard + air cooling + USB / QC3.0 fast charge + power switch + 12V / DC integrated power supply
Size of goods: 23.5 * 19.5 * 8.5cm
Commodity weight: 0.65kg
14 PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable docking.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5.USB fast charging output interface, which supports QC3.0 fast charging protocol.
6.15W Very large coil, FOB foreign body detection, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Product code: PS033.
Trade name: PS033. For Volkswagen Tiguan (2014-2018 without) wireless vehicle charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Emission power: 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?6975913481113
Commodity code: PSZ805.
Trade name: PSZ805. F Volkswagen Magotan (2017-2019) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN/ctn
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD223.50
2.â?¥20set, USD124.10
3.â?¥40set, USD120.70
4.â?¥60set, USD108.70
5.â?¥80set, USD97.80
6.â?¥100set, USD88.00
7.â?¥200set, USD79.20
8.â?¥300set, USD71.30
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
Commodity code: PSZ811.
Trade name: PSZ811. For Volkswagen Tanyue X (2019-2020) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Emission power: 15W / 10W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20 + 70
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product Size: 30 * 20 * 8 cm
Commodity weight: 0.60kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable docking.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5.USB fast charging output interface, which supports QC3.0 fast charging protocol.
6.10W Very large coil, FOB foreign body detection, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common
Step Price (FOB):
1. Sample unit price USD164.70
2.20set, USD98.80
3.40set, USD89.00
4.60set, USD80.10
5.80set, USD72.10
6.100set, USD64.90
7.200set, USD58.40
8.300set, USD52.60
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN 6975913481120
Commodity code: PSZ035.
Trade name: PSZ035. For Toyota Highlander (2015-2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal.
Step Price (FOB):
1. Sample unit price USD129.40
2.20set, USD77.70
3.40set, USD67.00
4.60set, USD63.00
5.80set, USD56.60
6.100set, USD51.00
7.200set, USD45.90
8.300set, USD41.30
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN
Commodity code: PSF4118.
Trade name: PSF4118.For Hyundai i20 (2019) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20 + 70
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
EAN
Product code: PSZ2060
Trade name: PSZ2060.For Kia KX 5 (2019) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
EAN
Product code: PSZ076
Trade name: PSZ076.For Nissan Sylphy (2020) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5. Support QC3.0 fast charging protocol.
6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blueis in charging, and redis in foreign body or abnormal.
EANï¼?
Product code: PSF2404
Trade name: PSF2404.For Ford Raptor F150 (2015-2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Transmitting power: 15 W and 10 W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-205 KHz
Input interface: power supply of the original cable connector
Charging mode: electromagnetic induction [wireless terminal] USB
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 24.5 * 7.5 cm
Commodity weight: 0.80kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC.
5. Support the QC3.0 fast charging protocol.
6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
EANï¼?
Product code: PS000197
Trade name: PS000197.FOR Jeep Free Light / Cherokee (2019-2022) Wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 15W / 10W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless end] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 10.5 * 6cm
Commodity weight: 0.31kg
PC/CTN
Product auspicious feeling:
1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging.
2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection.
3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design.
4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC.
5. Support QC3.0 fast charging protocol.
6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common.
matters need attention:
1. Make sure that there is no debris on the charging pad.
2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged.
3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter.
4. Charging indicator light green is in standby state, blueis in charging, and redis in foreign body or abnormal.
More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼?
Product code: PSZ447
Trade name: PSZ447.For Volvo XC60, S90, XC90, V90 (2017-2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 10W / 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product Size: 30 * 20 * 8 cm
Commodity weight: 0.60kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
EANï¼?
Product code: PS000178
Trade name: PS000178.FOR Volvo S60, XC60, V60, S90, XC90, V90CC (2016-2022) wireless vehicle charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 10W / 5W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product size: 18.2*10.6*0.65cm
Commodity weight: 0.27kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
EANï¼?
Product code: PSF1120
Trade name: PSF1120.GM Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 10W / 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product Size: 30 * 20 * 8 cm
Commodity weight: 0.60kg
PC/CTN
EANï¼?
Product code: PSF2107
Trade name: PSF2107.For Buick GL8,28 TES (2017-2019) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of a single coil
Emission power: 10W / 15W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Product Size: 30 * 20 * 8 cm
Commodity weight: 0.60kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
EANï¼?
Product code: PSZ448S
Trade name: PSZ448S.For Tesla Model3 Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level.
Environmental protection materials: ABS + PC
Coil design: a large effect of the single coil
Emission power: 15W / 10W
Conversion efficiency: 75% +
Input parameters: 9-16V
Output parameters: 5-9V
Operating temperature: -20â?? + 70â??
Operating frequency: 110 KHz-143 KHz
Input interface: power supply
Charging mode: electromagnetic induction [wireless terminal] USB
Installation location: central content box
Wireless charging induction distance: less than 4mm
Charging indicator: green is standby, blue is charging, red is foreign or abnormal
Left and right steering wheel driving universal.
Already passed through the CE FCC RoHS
Size of goods: 31.5 * 10.5 * 6cm
Commodity weight: 0.31kg
PC/CTN
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
PS22YBO2JP. Floor-type 2set connector 3-phase AC electric vehicle charger. Suitable for US, EU, JP, UK and other international electrical standards 22kW household type 2 electric vehicle intelligent charging station.
technical parameter:
Output voltage: AC380V�± 15%;
Input voltage: AC380V�± 15%;
Rated current: 32A + 32A;
Rated power: 22 kW;
Frequency range: 50 Hz �± 1%;
Connector: 2 sets;
Operating temperature: -25C~ + 50C;
Operating humidity: 5%~98%;
Cable length: random standard with 5m. Support to purchase 10m, 15m;
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU plug / UK plug / CEE plug
Standard: EC61851-1:2017, ICE62196-2:2016;
Support communication: APP,ocpp1.6j, rs-485, LAN, 4g, rfid card;
Charging mode: APP, plug-in and charge (support optional);
Working life of connector machinery: 10000 times (no-load plugging);
User interface and control: APP control, button control, card control;
Key surface index: charging time, real-time current / voltage / power supply / connection / charging / fault;
Product certification: 3C, CE, ROHS, REACH, cULus.
Step-Up Price (FOB):
1. Sample unit price, USD1286.76
2.200set, USD772.06
3.400set, USD694.85
4.600set, USD625.37
5.800set, USD562.83
PS44YBO2JP. Floor-type 2set connector 3-phase AC electric vehicle charger. Suitable for US, EU, JP, UK and other international electrical standards 44kW household type 2 electric vehicle intelligent charging station.
technical parameter:
Output voltage: AC380V�± 15%;
Input voltage: AC380V�± 15%;
Rated current: 32A + 32A;
Rated power: 44kW;
Frequency range: 50 Hz �± 1%;
Connector: 2 sets;
Operating temperature: -25�°C~ + 50�°C;
Operating humidity: 5%~98%;
Cable length: random standard with 5m. Support to purchase 10m, 15m;
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU plug / UK plug / CEE plug
Standard: EC61851-1:2017, ICE62196-2:2016;
Support communication: APP,ocpp1.6j, rs-485, LAN, 4g, rfid card;
Working life of connector machinery: 10000 times (no-load plugging);
Key surface index: charging time, real-time current / voltage / power supply / connection / charging / fault;
Product certification: 3C, CE, ROHS, REACH, cULus.
Commodity features:
Smart charger products include type 1, type 2,1 phase, 3 phase; 3.5 kW, 7 kW, 10 kW, 11 kW, 22 kW, 44 kW;
DC / ac smart charger covers byd, nio, xping, ideal car, aion, ZEEKR, audi, BMW, Chevrolet, Mercedes, porsche, Volkswagen, Volvo, Tesla, Citroen, fish, ford, mitsubishi, nissan, Peugeot, Renault, Smith, tower, Toyota, Honda, prius, chery, walker, most countries such as electric car market family (residential) and commercial purposes;
Safety design / multiple protection: underpower protection, overvoltage protection, overload protection, overcurrent protection, overwet protection, leakage protection, grounding protection, lightning protection, electrostatic protection, flame retardant protection;
Waterproof grade: IP65;
Noise control: 60dB;
OLED screen: display the charging current, voltage, output energy, charging time, status information, fault information, etc.;
Body material: zinc alloy belongs;
Quality assurance: 12 months;
Device color: the support for customization.
Step Price (FOB):
1. Sample unit price, USD1657.35
2.200set, USD994.41
3.400set, USD894.97
4.600set, USD805.47
5.800set, USD724.90
PSL030D. Floor-type 3-phase 5-line DC ev charger. Suitable for US, EU, JP, UK and other international electrical standards 380V ± 15%, 30KW commercial electric vehicle intelligent charging station.
technical parameter:
Input voltage: DC 380V± 15%,
Rated power: 30KW;
Output voltage range: 150-1000VDC;
Output current range: 0-100A;
Connector type: NEMA 6-20P / 5-15P, NEMA 6-50P / 14-50P;
Support communication: APP, RFID Card, Button;
External Communicationï¼?3G\4Gã?? LAN(RJ-45) and WIFI ï¼?
Connector: 2 sets;
Cable length: random standard with 5m. Support to purchase 10m, 15m;
Operating temperature: -25°C~ + 50°C;
Operating humidity: 5%~98%;
Key surface index: charging time, real-time current / voltage / power supply / connection / charging / fault; 7-inch highlight color LCD screen;
Working life of connector machinery: 10000 times (no-load plugging);
Quality assurance: 12 months;
Waterproof grade: IP54;
Product certification: 3C, CE, ROHS, REACH, cULus.
Commodity features:
Smart charger product 3 phase; DC 380V± 15%, 30 kW;
DC / ac smart charger covers byd, nio, xping, ideal car, aion, ZEEKR, audi, BMW, Chevrolet, Mercedes, porsche, Volkswagen, Volvo, Tesla, Citroen, fish, ford, mitsubishi, nissan, Peugeot, Renault, Smith, tower, Toyota, Honda, prius, chery, walker, most countries such as electric car market family (residential) and commercial purposes;
Safety design / multiple protection: underpower protection, overvoltage protection, overload protection, overcurrent protection, overwet protection, leakage protection, grounding protection, lightning protection, electrostatic protection, flame retardant protection;
Waterproof grade: IP54;
Noise control: 60dB;
Human-machine interface: 7-inch LCD color display screen touch screen, LED indicator light;
OLED screen: display the charging current, voltage, output energy, charging time, status information, fault information, etc.;
Body materials: metal;
Quality assurance: 12 months;
Device color: the support for customization.
Step Price (FOB):
1. Sample unit price is USD16505.82
2.200set, USD9635.30
3.400set, USD8671.76
4.600set, USD7804.58
5.800set, USD7024.12
PSL150S. Floor-type 3-phase 5-line DC ev charger. Suitable for US, EU, JP, UK and other international electrical standards 380V �± 15%, 150KW commercial electric vehicle intelligent charging station.
technical parameter:
Input rating: DC 380V�± 15%;
Rated power: 150KW;
Output voltage range: 150-1000VDC;
Output current range: 0-250A;
Connector type: NEMA 6-20P / 5-15P, NEMA 6-50P / 14-50P;
Support communication: APP, RFID Card, Button;
External Communication�¯�¼?3G\4G�£ LAN(RJ-45) and WIFI �¯�¼?
Connector: 2 sets;
Cable length: random standard with 5m. Support to purchase 10m, 15m;
Operating temperature: -25�°C~ + 50�°C;
Operating humidity: 5%~98%;
Key surface index: charging time, real-time current / voltage / power supply / connection / charging / fault; 7-inch highlight color LCD screen;
Working life of connector machinery: 10000 times (no-load plugging);
Quality assurance: 12 months;
Waterproof grade: IP54;
Product certification: 3C, CE, ROHS, REACH, cULus.
Commodity features:
Smart charger product 3 phase; DC 380V�± 15%, 150kw;
DC / ac smart charger covers byd, nio, xping, ideal car, aion, ZEEKR, audi, BMW, Chevrolet, Mercedes, porsche, Volkswagen, Volvo, Tesla, Citroen, fish, ford, mitsubishi, nissan, Peugeot, Renault, Smith, tower, Toyota, Honda, prius, chery, walker, most countries such as electric car market family (residential) and commercial purposes;
Safety design / multiple protection: underpower protection, overvoltage protection, overload protection, overcurrent protection, overwet protection, leakage protection, grounding protection, lightning protection, electrostatic protection, flame retardant protection;
Waterproof grade: IP54;
Noise control: 60dB;
Human-machine interface: 7-inch LCD color display screen touch screen, LED indicator light;
OLED screen: display the charging current, voltage, output energy, charging time, status information, fault information, etc.;
Body materials: metal;
Quality assurance: 12 months;
Device color: the support for customization.
Step Price (FOB):
1. Sample unit price,40147.06
2.200set, USD24088.24
3.400set, USD21679.42
4.600set, USD19511.48
5.800set, USD17560.33
PSL240S. Floor-type 3-phase 5-line DC ev charger. Suitable for US, EU, JP, UK and other international electrical standards 380V �± 15%, 240KW commercial electric vehicle intelligent charging station.
technical parameter:
Input voltage: DC 380V�± 15%,
Rated power: 240KW;
Output voltage range: 150-1000VDC;
Output current range: 0-250A;
Connector type: NEMA 6-20P / 5-15P, NEMA 6-50P / 14-50P;
Support communication: APP, RFID Card, Button;
External Communication3G\4G LAN(RJ-45) and WIFI
Connector: 2 sets;
Cable length: random standard with 5m. Support to purchase 10m, 15m;
Operating temperature: -25�°C~ + 50�°C;
Operating humidity: 5%~98%;
Key surface index: charging time, real-time current / voltage / power supply / connection / charging / fault; 7-inch highlight color LCD screen;
Working life of connector machinery: 10000 times (no-load plugging);
Quality assurance: 12 months;
Waterproof grade: IP54;
Product certification: 3C, CE, ROHS, REACH, cULus.
Step Price (FOB):
1. Sample unit price,USD45963.24
2.200set, USD27577.94
3.400set, USD24820.15
4.600set, USD22338.14
5.800set, USD20104.33
EAN
Product code: PS343
Trade name: PS343. Car wireless charger (with automatic motor induction). Support for mobile phone automatic clamping, with a motor. Support 15W wireless charging, over the QI motherboard, with a large bracket.(With a QI certificate). Note: The automatic induction motor, the car will also be very tight when bumping.
joggle:Micro
Input: 5V/3A,9V/2A,12V/1.5A
Output: 15W/10W/7.5W/5W (mobile phone)
Compatibility: Support for mobile phones with wireless charging function
Product material: ABS + Oil oil injection & UV PC + galvanized parts
Product color: red / black / yellow / blue / white
Step Price (FOB):
1. Sample unit price, USD29.40
2. 100set, USD17.70
3. 200set, USD15.90
4. 300set, USD14.30
5. 400set, USD12.90
EAN
Product code: PS480
Trade name: PS480. Magnetic suction car wireless charger. Support 15W wireless charging, Apple 12 magnetic suction with air outlet bracket.
joggle:usb-a
Input: 5V/3A,9V/2A,12V/1.5A
Output: 15W/10W/7.5W/5W
Receiver: 9V / 2A
Compatibility: Support for the iphone12 series
Product material: plastic + mirror PC + aluminum shell + acrylic
Product color: black
Step Price (FOB):
1. Sample unit price, USD24.10
2. 100set, USD14.50
3. 200set, USD13.00
4. 300set, USD11.70
5. 400set, USD10.60
EAN:
Product code: PS506B
Product name: PS506B. Five-in-one folding wireless charger (desktop), support mobile phone / Apple watch / Bluetooth headset / wireless charging equipped with seven lights / desk lamp that put the charge. Functional function, elegant classic.
Interface: Type-C
Input: 9V / 2A, 5V / 3A
Output: 15W/10W/7.5W/5W (mobile phone)
output:2.5W(iWatch)
Output: 3W (TWS Bluetooth Headset)
Output: 1W (seven colored lights)
Output: 3W (table lamp)
Receiver: 9V / 2A
Compatibility: The QI-compatible devices are supported
Product material: ABS + PC
Product color: black, white
Step Price (FOB):
1. Sample unit price, USD45.88
2. 100set, USD27.50
3. 200set, USD24.80
4. 300set, USD22.30
5. 400set, USD20.10
6. 500set, USD18.10
7. 600set, USD16.30
8. 700set, USD14.60
EAN
Product code: PS416
Product name: PS416.3-in-1 wireless charger (desktop folding), support mobile phone / watch / Bluetooth headset for charging. Functional function, elegant classic.
Interface: Type-C
Input: 9V / 2A, 5V / 3A
Output: 15W/10W/7.5W/5W (mobile phone)
output:2.5W(iWatch)
Output: 3W (TWS Bluetooth Headset)
Receiver: 9V / 2A
Compatibility: Support for QI-compatible devices
Product material: PC + tempered glass
Product color:, Black / gray
Step Price (FOB):
1. Sample unit price, USD33.00
2. 100set, USD19.76
3. 200set, USD17.78
4. 300set, USD16.00
5. 400set, USD14.40
6. 500set, USD12.96
7. 600set, USD11.66
8. 700set, USD10.50
EAN
Product code: PS531B
Trade name: PS531B. Three-in-1 wireless charger (Type-C. Double plug), support mobile phone / Apple Watch / Bluetooth headset. Functional function, elegant classic.
Interface: Type-C
Input: 9V / 2A, 5V / 3A
Output: 15W/10W/7.5W/5W (mobile phone)
output:2.5W(iWatch)
Output: 3W (TWS Bluetooth Headset)
Receiver: 9V / 2A
Compatibility: The QI-compatible devices are supported
Product material: ABS + PC
Product color: Black
Step Price (FOB):
1. Sample unit price, USD17.65
2. 100set, USD10.60
3. 200set, USD9.53
4. 300set, USD8.58
5 400set, USD7.72
6. 500set, USD6.95
7. 600set, USD6.26
8. 700set, USD5.63
EAN
Product code: PS468B
Trade name: PS468B. Magnetic suction three-in-one wireless charger (desktop), support iPhone 12 / 13 series, AirPods wireless charging compatible small night light that is put charging. Functional function, elegant classic.
Interface: Type-C
Input: 9V / 2A, 5V / 3A
Output: 15W/10W/7.5W/5W (mobile phone)
Output: 2W (TWS Bluetooth Headset)
Receiver: 9V / 2A
Compatibility: The QI-compatible devices are supported
Product material: ABS + PC
Product color: Black \ white
Step Price (FOB):
1. Sample unit price, USD31.76
2. 100set, USD19.06
3. 200set, USD17.15
4. 300set, USD15.44
5. 400set, USD13.90
6. 500set, USD12.51
7. 600set, USD11.26
8. 700set, USD10.13
EAN
Product code: PS508
Product name: PS508. Desktop 4-in-one wireless charger, support mobile phone / Bluetooth headset that charging. Digital clock, timing alarm clock. Functional function, elegant classic.
Interface: Type-C
Input: 9V / 2A, 5V / 3A
Output: 15W/10W/7.5W/5W (mobile phone)
Output: 3W (TWS Bluetooth Headset)
Receiver: 9V / 2A
Compatibility: Support for QI-compatible devices
Product material: ABS + PC
Product color: Black \ white
Step Price (FOB):
1. Sample unit price, USD30.60
2. 100set, USD18.35
3. 200set, USD16.52
4. 300set, USD14.87
5. 400set, USD13.40
6. 500set, USD12.04
7. 600set, USD10.84
8. 700set, USD9.76
EAN
Product code: PS526
Product name: PS526. 3-in-1 wireless charger (desktop), support mobile phone / Apple watch / Bluetooth headset that charging. Functional function, elegant classic.
Interface: Type-C
Input: 9V / 2A, 5V / 3A
Output: 15W/10W/7.5W/5W (mobile phone)
output:2.5W(iWatch)
Output: 3W (TWS Bluetooth Headset)
Receiver: 9V / 2A
Compatibility: Support for QI-compatible devices
Product material: ABS + PC
Product color: Black
Step Price (FOB):
1. Sample unit price, USD31.76
2. 100set, USD19.06
3. 200set, USD17.15
4. 300set, USD15.44
5. 400set, USD13.90
6. 500set, USD12.51
7. 600set, USD11.26
8. 700set, USD10.13
EAN
Product code: PS498
Product name: PS498. Folding four-in-one wireless charger (desktop), support mobile phone / Apple watch / Bluetooth headset / Apple Pencil 1 generation is put on charging. Functional function, elegant classic.
Interface: Type-C
Input: 9V / 2A, 5V / 3A
Output: 15W/10W/7.5W/5W (mobile phone)
output:2.5W(iWatch)
Output: 3W (TWS Bluetooth Headset)
Output: 1W (Apple Pencil 1 generation)
Receiver: 9V / 2A
Compatibility: The QI-compatible devices are supported
Product material: ABS + PC
Product color: black, white
Step Price (FOB):
1. Sample unit price, USD27.06
2. 100set, USD16.24
3. 200set, USD14.62
4. 300set, USD13.16
5. 400set, USD11.84
6. 500set, USD10.66
7. 600set, USD9.60
8. 700set, USD8.65
EAN
Product code: PS455
Product name: PS455.3-in-1 wireless charger (desktop), support mobile phone / Apple watch / Bluetooth headset that charging. Functional function, elegant classic.
Interface: Type-C
Input: 9V / 2A, 5V / 3A
Output: 15W/10W/7.5W/5W (mobile phone)
output:3W(iWatch)
Output: 2W (TWS Bluetooth headset
Receiver: 9V / 2A
Compatibility: Support for QI-compatible devices
Product material: ABS + acrylic
Product color: Cool black \ ivory white
Step Price (FOB):
1. Sample unit price, USD31.76
2. 100set, USD19.06
3. 200set, USD17.15
4. 300set, USD15.44
5. 400set, USD13.90
6. 500set, USD12.51
7. 600set, USD11.26
8. 700set, USD10.13
EAN
Product code: PS499
Product name: PS499. Folding four in one wireless charger (desktop), support mobile phone / Apple watch / Bluetooth headset wireless charging equipped with seven lights that put charge. Touch the night light switch, adjust the colorful color light mode in turn, warm your night.
Interface: Type-C
Input: 9V / 2A, 5V / 3A
Output: 15W/10W/7.5W/5W (mobile phone)
output:2.5W(iWatch)
Output: 3W (TWS Bluetooth Headset)
Output: 1W (seven colored lights)
Receiver: 9V / 2A
Compatibility: The QI-compatible devices are supported
Product material: ABS + PC
Product color: black, white, macaron green, macaron blue, macaron powder
Step Price (FOB):
1. Sample unit price, USD35.30
2. 100set, USD21.17
3. 200set, USD19.05
4. 300set, USD17.15
5. 400set, USD15.44
6. 500set, USD13.90
7. 600set, USD12.51
8. 700set, USD11.26
EAN
Product code: PS531
Trade name: PS531B. Three-in-1 wireless charger (Type-C. Double plug), support mobile phone / Apple Watch / Bluetooth headset. Functional function, elegant classic.
Interface: Type-C
Input: 9V / 2A, 5V / 3A
Output: 15W/10W/7.5W/5W (mobile phone)
output:2.5W(iWatch)
Output: 3W (TWS Bluetooth Headset)
Receiver: 9V / 2A
Compatibility: The QI-compatible devices are supported
Product material: ABS + PC
Product color: Black
Step Price (FOB):
1. Sample unit price, USD17.65
2. 100set, USD10.60
3. 200set, USD9.53
4. 300set, USD8.58
5. 400set, USD7.72
6. 500set, USD6.95
7. 600set, USD6.26
8. 700set, USD5.63
EAN
Product code: PSQ507
Trade name: PSQ507. Wall-mounted / floor plate type AC230V, 32A, 7 KW household type 2 electric vehicle intelligent charger
Enter the wiring scheme: L + N + PE
Input rated voltage: AC 230V
Input the rated current: 32A
Input frequency: 50 / 60Hz
Output voltage: AC 240V
Output current: 32A
Rated power: 7KW
Operating temperature: -30 C + 50C
Storage temperature: -40 + 80
Working humidity: 5% 98% no coagulation cream, no condensation
RCD A+DC6mA
Cable connectors: SAE J1772, EC61851-1, IEC 62196-2
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU Plug / UK Plug / CEE Plug
Support communication: APP, 4G, RJ 45, Bluetooth / wifi
Start mode: plug and play.(Support for optional password, fingerprint, swipe card, QR code)
Connector mechanical working life: 10,000 times
Emergency stop: Standard configuration OK
Key surface indicator: green / blue / red (blue-standby; green-charging gun connected to the car, flashing for charging; red-abnormal)
Cable length: 5m standard in Europe and 7.60m standard in America. Support to buy 10m, 15m
Quality assurance: 12 months
Waterproof grade: IP65
Impact protection: IK 10
Noise control: 60 dB
Product certification: 3C, CE, ROHS, REACH
Commodity color:
4. Protection:
High quality, safe and reliable use of production design standards: overvoltage protection, undervoltage protection, grounding protection, lightning protection, leakage protection, flame retardant protection, overcurrent protection, intelligent temperature control protection, relay adhesion protection, input off protection and other vehicle regulation level protection measures.
Step Price (FOB):
1. Sample unit price,USD614.70
2. 10set, USD368.80
3. 20set, USD332.00
4. 30set, USD298.80
5. 40set, USD268.90
EAN
Product code: PSQ511
Trade name: PSQ511. Wall-mounted / floor plate type AC 400V, 16A, 11KW household type 2 electric vehicle smart charger
Input the wiring scheme: L1 + L2 + L3 + N + PE
Input rated voltage: AC 400V
Input the rated current: 16A
Input frequency: 50 / 60Hz
Output voltage: AC 400Vâ?
Output current: 16A
Rated power: 11KW
Operating temperature: -30 C + 50 C
Storage temperature: -40 + 80
Working humidity: 5% 98% no coagulation cream, no condensation
RCD A+DC6mA
Cable connectors: SAE J1772, EC61851-1, IEC 62196-2
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU Plug / UK Plug / CEE Plug
Support communication: APP, 4G, RJ 45, Bluetooth / wifi
Start mode: plug and play.(Support for optional password, fingerprint, swipe card, QR code)
Connector mechanical working life: 10,000 times
Emergency stop: Standard configuration OK
Key surface indicator: green / blue / red (blue-standby; green-charging gun connected to the car, flashing for charging; red-abnormal)
Cable length: 5m standard in Europe and 7.60m standard in America. Support to buy 10m, 15m
Quality assurance: 12 months
Waterproof grade: IP65
Impact protection: IK 10
Noise control: 60 dB
Product certification: 3C, CE, ROHS, REACH
Commodity color:
Step Price (FOB):
1. Sample unit price,USD664.70
2. 10set, USD398.80
3. 20set, USD359.00
4. 30set, USD323.10
5. 40set, USD290.80
EAN
Product code: PSQ522
Trade name: PSQ522. Wall-mounted / floor plate type AC 400V, 32A, 22KW household type 2 electric vehicle intelligent charger
Input the wiring scheme: L1 + L2 + L3 + N + PE
Input rated voltage: AC 400V
Input the rated current: 32A
Input frequency: 50 / 60Hz
Output voltage: AC 400V
Output current: 32A
Rated power: 22KW
Operating temperature: -30 C + 50 C
Storage temperature: -40 + 80
Working humidity: 5% 98% no coagulation cream, no condensation
RCD A+DC6mA
Cable connectors: SAE J1772, EC61851-1, IEC 62196-2
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU Plug / UK Plug / CEE Plug
Support communication: APP, 4G, RJ 45, Bluetooth / wifi
Start mode: plug and play.(Support for optional password, fingerprint, swipe card, QR code)
Connector mechanical working life: 10,000 times
Emergency stop: Standard configuration OK
Key surface indicator: green / blue / red (blue-standby; green-charging gun connected to the car, flashing for charging; red-abnormal)
Cable length: 5m standard in Europe and 7.60m standard in America. Support to buy 10m, 15m
Quality assurance: 12 months
Waterproof grade: IP65
Impact protection: IK 10
Noise control: 60 dB
Product certification: 3C, CE, ROHS, REACH
Commodity color:
Step Price (FOB):
1. Sample unit price,USD723.50
2. 10set, USD434.10
3. 20set, USD390.70
4. 30set, USD351.60
5. 40set, USD316.50
EAN
Product code: PSQ607
Trade name: PSQ607. Wall-mounted / floor plate type AC230V, 32A, 7 KW household type 2 electric vehicle smart charger
Enter the wiring scheme: L + N + PE
Input rated voltage: AC 230V
Input the rated current: 32A
Input frequency: 50 / 60Hz
Output voltage: AC 240V
Output current: 32A
Rated power: 7KW
Operating temperature: -30 C + 50 C
Storage temperature: -40 + 80
Working humidity: 5% 98% no coagulation cream, no condensation
RCD A+DC6mA
Cable connectors: SAE J1772, EC61851-1, IEC 62196-2
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU Plug / UK Plug / CEE Plug
Support communication: APP, 4G, RJ 45, Bluetooth / wifi
Start mode: plug and play.(Support for optional password, fingerprint, swipe card, QR code)
Connector mechanical working life: 10,000 times
Emergency stop: Standard configuration OK
Key surface indicator: green / blue / red (blue-standby; green-charging gun connected to the car, flashing for charging; red-abnormal)
Cable length: 5m standard in Europe and 7.60m standard in America. Support to buy 10m, 15m
Quality assurance: 12 months
Waterproof grade: IP65
Impact protection: IK 10
Noise control: 60 dB
Product certification: 3C, CE, ROHS, REACH
Other instructions: working efficiency is greater than 98%; insulation resistance is greater than 10 M�©; power consumption of control module is greater than 7W
Commodity color:
Step Price (FOB):
1. Sample unit price,USD676.50
2. 10set, USD405.90
3. 20set, USD362.30
4. 30set, USD328.80
5. 40set, USD295.90
EAN
Product code: PSQ611
Trade name: PSQ611. Wall-mounted / floor plate type AC 400V, 16A, 11KW household type 2 electric vehicle intelligent charger
Input the wiring scheme: L1 + L2 + L3 + N + PE
Input rated voltage: AC 400V
Input the rated current: 16A
Input frequency: 50 / 60Hz
Output voltage: AC 400V
Output current: 16A
Rated power: 11KW
Operating temperature: -30 C + 50 C
Storage temperature: -40 + 80
Working humidity: 5% 98% no coagulation cream, no condensation
RCD A+DC6mA
Cable connectors: SAE J1772, EC61851-1, IEC 62196-2
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU Plug / UK Plug / CEE Plug
Support communication: APP, 4G, RJ 45, Bluetooth / wifi
Start mode: plug and play.(Support for optional password, fingerprint, swipe card, QR code)
Connector mechanical working life: 10,000 times
Emergency stop: Standard configuration OK
Key surface indicator: green / blue / red (blue-standby; green-charging gun connected to the car, flashing for charging; red-abnormal)
Cable length: 5m standard in Europe and 7.60m standard in America. Support to buy 10m, 15m
Quality assurance: 12 months
Waterproof grade: IP65
Impact protection: IK 10
Noise control: 60 dB
Product certification: 3C, CE, ROHS, REACH
Other instructions: working efficiency is greater than 98%; insulation resistance is greater than 10 M�©; power consumption of control module is greater than 7W
Commodity color:
Step Price (FOB):
1. Sample unit price,USD794.10
2. 10set, USD476.50
3. 20set, USD428.80
4. 30set, USD386.00
5. 40set, USD347.40
EAN
Product code: PSQ61148
Trade name: PSQ61148. Wall-mounted / floor plate type AC240V, 48A, 11KW household type 2 electric vehicle intelligent charger
Enter the wiring scheme: L + N + PE
Input rated voltage: AC 240V
Input the rated current: 48A
Input frequency: 50 / 60Hz
Output voltage: AC 240V
Output current: 48A
Rated power: 11KW
Operating temperature: -30 C + 50 C
Storage temperature: -40 + 80
Working humidity: 5% 98% no coagulation cream, no condensation
RCD A+DC6mA
Cable connectors: SAE J1772, EC61851-1, IEC 62196-2
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU Plug / UK Plug / CEE Plug
Support communication: APP, 4G, RJ 45, Bluetooth / wifi
Start mode: plug and play.(Support for optional password, fingerprint, swipe card, QR code)
Connector mechanical working life: 10,000 times
Emergency stop: Standard configuration OK
Key surface indicator: green / blue / red (blue-standby; green-charging gun connected to the car, flashing for charging; red-abnormal)
Cable length: 5m standard in Europe and 7.60m standard in America. Support to buy 10m, 15m
Quality assurance: 12 months
Waterproof grade: IP65
Impact protection: IK 10
Noise control: 60 dB
Product certification: 3C, CE, ROHS, REACH
Other instructions: working efficiency is greater than 98%; insulation resistance is greater than 10 M�©; power consumption of control module is greater than 7W
Commodity color:
Step Price (FOB):
1. Sample unit price,USD836.00
2. 10set, USD501.60
3. 20set, USD451.50
4. 30set, USD406.30
5. 40set, USD365.70
EAN
Product code: PSQ622
Trade name: PSQ622. Wall-mounted / floor plate type AC 400V, 32A, 22KW household type 2 electric vehicle smart charger
Input the wiring scheme: L1 + L2 + L3 + N + PE
Input rated voltage: AC 400V
Input the rated current: 32A
Input frequency: 50 / 60Hz
Output voltage: AC 400V
Output current: 32A
Rated power: 22KW
Operating temperature: -30 C + 50 C
Storage temperature: -40 + 80
Working humidity: 5% 98% no coagulation cream, no condensation
RCD A+DC6mA
Cable connectors: SAE J1772, EC61851-1, IEC 62196-2
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU Plug / UK Plug / CEE Plug
Support communication: APP, 4G, RJ 45, Bluetooth / wifi
Start mode: plug and play.(Support for optional password, fingerprint, swipe card, QR code)
Connector mechanical working life: 10,000 times
Emergency stop: Standard configuration OK
Key surface indicator: green / blue / red (blue-standby; green-charging gun connected to the car, flashing for charging; red-abnormal)
Cable length: 5m standard in Europe and 7.60m standard in America. Support to buy 10m, 15m
Quality assurance: 12 months
Waterproof grade: IP65
Impact protection: IK 10
Noise control: 60 dB
Product certification: 3C, CE, ROHS, REACH
Other instructions: working efficiency is greater than 98%; insulation resistance is greater than 10 M�©; power consumption of control module is greater than 7W
Commodity color:
Step Price (FOB):
1. Sample unit price,USD882.40
2. 10set, USD529.40
3. 20set, USD476.50
4. 30set, USD428.80
5. 40set, USD386.00
EAN
Product code: PSQ811
Trade name: PSQ811. Wall-mounted / floor plate type AC400V, 16A, 11KW commercial type 2 electric vehicle smart charger
Input the wiring scheme: L1 + L2 + L3 + N + PE
Input rated voltage: AC 400V
Input the rated current: 16A
Input frequency: 50 / 60Hz
Output voltage: AC 400V
Output current: 16A
Rated power: 11KW
Operating temperature: -30 C + 50 C
Storage temperature: -40 + 80
Working humidity: 5% 98% no coagulation cream, no condensation
RCD A+DC6mA
Cable connectors: SAE J1772, EC61851-1, IEC 62196-2
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU plug / UK plug / CEE plug
Support communication: APP, 4G, RJ 45, Bluetooth / wifi
Start method: QR code or card payment use
Connector mechanical working life: 10,000 times
Emergency stop: Standard configuration OK
Key surface indicator: green / blue / red (blue-standby; green-charging gun connected to the car, flashing for charging; red-abnormal)
Cable length: 5m standard in Europe and 7.60m standard in America. Support to buy 10m, 15m
Quality assurance: 12 months
Waterproof grade: IP65
Impact protection: IK 10
Noise control: 60 dB
Product certification: 3C, CE, ROHS, REACH
Other instructions: working efficiency is greater than 98%; insulation resistance is greater than 10 M�©; power consumption of control module is greater than 7W
Commodity color:
Step Price (FOB):
1. Sample unit price,USD882.40
2. 10set, USD529.40
3. 20set, USD476.50
4. 30set, USD428.80
5. 40set, USD386.00
EAN
Product code: PSQ822
Trade name: PSQ822. Wall-mounted / floor plate type AC400V, 32A, 22KW commercial type 2 electric vehicle smart charger
Input the wiring scheme: L1 + L2 + L3 + N + PE
Input rated voltage: AC 400V
Input the rated current: 32A
Input frequency: 50 / 60Hz
Output voltage: AC 400V
Output current: 32A
Rated power: 22KW
Operating temperature: -30 C + 50 C
Storage temperature: -40 + 80
Working humidity: 5% 98% no coagulation cream, no condensation
RCD A+DC6mA
Cable connectors: SAE J1772, EC61851-1, IEC 62196-2
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU plug / UK plug / CEE plug
Support communication: APP, 4G, RJ 45, Bluetooth / wifi
Start method: QR code or card payment use
Connector mechanical working life: 10,000 times
Emergency stop: Standard configuration OK
Key surface indicator: green / blue / red (blue-standby; green-charging gun connected to the car, flashing for charging; red-abnormal)
Cable length: 5m standard in Europe and 7.60m standard in America. Support to buy 10m, 15m
Quality assurance: 12 months
Waterproof grade: IP65
Impact protection: IK 10
Noise control: 60 dB
Product certification: 3C, CE, ROHS, REACH
Other instructions: working efficiency is greater than 98%; insulation resistance is greater than 10 M�©; power consumption of control module is greater than 7W
Commodity color:
Step Price (FOB):
1. Sample unit price,USD882.40
2. 10set, USD529.40
3. 20set, USD476.50
4. 30set, USD428.80
5. 40set, USD386.00
SPUï¼? PSVP001
Trade name: Bluetooth Bluetooth 4.0, elm327 V2.2 auto fault detector, auto fault diagnosis instrument, obd diagnosis tool, car Bluetooth reading code card, factory direct selling (PSVP003 model supports Bluetooth + type-C).
technical parameter
Communication mode: Bluetooth 24.0
Main control chip: PIC18 F25K80
Support system: Android / Windows / Ios
Operating voltage: 9V / 16V
Operating current: 40mA
Operating temperature: -40â?? + 80â??
Working humidity: 60%
Product size: 56 * 45.8 * 24mm
Packing size: 110 * 70 * 30mm
Product weight: 82g
Quantity quantity: 90 pcs
product function:
1. 9 protocols supporting the OBD II / EOBD standard
2. Wide power range: 9~36V power supply, reliable over current and over voltage protection
3. Adopt the standby low-power mode to ensure the safe use of car batteries
4. Bluetooth dual-mode 4.0, support for Android system and Apple system
5. Use digital tube to display voltage and current to improve customer experience
6. Compatible software platform
Window version: Scan Master, ScanTool.net, PCMSCAN, etc
Android version: Torque, dashboard commands, OBD Auto Doctor, Auto doctor, Mini OBD II, EOBD, etc
Version of iOS: automatic doctor, OBD car doctor, dashboard commands, EOBD, etc
Symbian version: OBDScope
Software support platform: Windows XP, Windows 7 / 8, Android, iOS, Symbian island and other systems
product description
Read the error diagnostic code
Clear fault code (clear error code and close MIL)
Engine RPM per minute (RPM)
Calculate the load value
coolant temperature
Fuel system status
velocity
Short-term fuel condition
Long-term fuel condition
Intake manifold pressure
Fuel injection advance time
inlet temperature
air flow rate
Throttle absolute position
Oxygen detection voltage associated with the short-term fuel status
Fuel system status
Fuel pressure
Fuel consumption monitoring, etc.
Note: According to the number of actual supported data items, year support.
Recommended APP, FOR Android: torque, OBD Home, FOR Apple: car scanner, OBD Auto Doctor, OBD Home
Small size, high chip integration, with independent appearance patent, utility model patent and software copyright.
Certified by CE, FCC, and RoHS.
Support agreement
Vehicle Diagnostic Tool WiFi Elm327 Fault Repair Decoder ECU Card Reader Car Diagnostic Scanner Diesel vehicle diagnostic tool
Auto Repair OBD 2 scanner Vehicle fault analyzer Diesel car OBD scan tool ECU reader OBD key programmer
OBD Automotive Diagnostic Scanner OBD Adapter OBD II Diagnostic System OBD reader Motorcycle diagnostics scanner
Important notice!
Celebrate that our company has won the China Council for the Promotion of International Trade "Selected Brands for Domestic Products Exported to Erhai" enterprise certification in July 2022, China National Industrial Internet Logo Enterprise Certification, CCTV China Television Shopping "Recommended Products for Domestic Products Overseas Mall" and TikTok Mall Recommended products, facing the world TV broadcasts to share with consumers the promotions of China's high-quality, affordable and high-quality goods.
1. The whole store discount of smart helmet series products is 20% off.
2. The whole store discount of Bluetooth intercom headset series is 20% discount.
3. The whole store discount of driving recorder series products is 20% off
PS03D-1080P Smart Video and Navigation Audio Bluetooth Helmet. (Embedded bluetooth speaker, camera, LED brake light, WIFI App, intercom headset, gravity induction magnetic shading). Suitable for motorcycles, electric motorcycles, bicycles, mountain bikes, scooters, road cars and other outdoor sports safe riding. Size: L58-62cm
Smart helmet model: PS03D-1080P
Material: PC+EPS
Size: 58-62cm, 520g
Battery: 3.7V / 1200mAh
Video resolution: 1080FHD 1920x1080
Camera lens DSP: MOV
Camera format: H.264
Video format: MJPEG
Bluetooth transmission: 10M-12M
Speaker: 2x0.5W (stereo)
Microphone: -35dB -41dB
Bluetooth mode: BT5.2+BLE4.2 (dual mode)
Electrical parameters: USB TYPE DC 5V/0.5A
Charging mode: plug-in charging port 3h
Duration: 64BG 6h (recording), BT 36h (playing)
Intelligent voice/remote control dual-mode operating system: WIFI+APP, answering calls, voice navigation, MP3 music, connection flash control (left turn light, right turn light, double flash light)
Function lights: MP3+ light battery life 6h, ARGB LED colorful tail lights + left/right turn signals>10h
Operating System (iOS): Mac ios Android
Step Price (FOB):
1. Single price USD307.70
2.20set, USD129.23
3.40set, USD116.31
4.60set, USD104.68
5.80set, USD94.21
6.100set, USD84.79
MOQ 1 starting wholesale item price USD104.68, air freight USD49.00, transportation cycle 14 days to 21 days to the door, support one generation
PSBH-51M neo. Sports camera and SOS rescue bluetooth communication smart helmet. Suitable for electric motorcycles, bicycles, motorcycles, off-road vehicles, ATVs, road vehicles, rock climbing, roller skating outdoor sports safe riding.
Smart Helmet Model: PSBH-51Mneo
Main material: PC+EPS
Head circumference size: (57-61cm, 480g)
Polymer lithium battery: 3.7V / 450mAh (1.665WH)
Video resolution: 1080FHD 1920x1080
Intercom function: multi-person group real-time intercom
Smart Alert: SOS Location Rescue
Camera lens DSP: MOV
Bluetooth transmission: 10M-12M
Speaker: 2x0.5W (stereo)
Microphone: -35dB -41dB
Bluetooth mode: BT5.2+BLE4.2 (dual mode)
Electrical parameters: USB TYPE DC 5V/0.5A
Charging mode: Magnetic charging port 3h
Standby time: 180 days
Intelligent voice/remote control dual-mode operating system: WIFI+APP, answering calls, voice navigation, connection flash control (left turn light, right turn light, double flash light), MP3 music
Function lights: MP3+ light lasting 6h, ARGB LED colorful taillights+left/right turn signal>10h
Operating System (iOS): Mac ios Android
Step Price (FOB):
1. Single price USD423.10
2. 20set, USD177.69
3. 40set, USD159.92
4. 60set, USD143.93
5. 80set, USD129.54
6. 100set, USD116.60
MOQ 1 starting wholesale item price USD143.93, air freight USD49.00, transportation cycle 14 days to 21 days to the door, support one generation
PSZNTK-001. Sports camera (front/rear) with Bluetooth communication smart helmet. Suitable for motorcycles, electric motorcycles, off-road vehicles, ATVs, road vehicles, and roller skating outdoor sports for safe riding.
Smart helmet model: PSZNTK-001
Main material: ABS+PC+EPS
Head circumference size: 56-66cm, 700g
Battery capacity: 3.7V-4.2V/3000mAh
Camera lens DSP: AHD1920x1080P (front motion lens), AHD1920x720P (rear motion lens)
Loop recording: 64GB(16h), 32GB(8h)
Video format: H.264 MOV
Image format: JPEG (by AI ANTK APP)
AI Bluetooth: WIFI+APP AI nagativtion AI Talking order
Bluetooth transmission: 15M-18M
Speaker: 2x0.5W (stereo)
Microphone: -35dB -41dB
Bluetooth mode: BT5.2+BLE4.2 (dual mode)
Electrical parameters: USB TYPE DC 5V/0.5A
Charging mode: plug-in charging port 5h
Standby time: 200 days
Intelligent voice mode operating system: WIFI+APP, answering calls, sending and receiving text messages, receiving news broadcasts, voice navigation, MP3 music
Operating System (iOS): Mac ios Android
Step Price (FOB):
1. Single price USD292.30
2. 20set, USD122.77
3. 40set, USD110.49
4. 60set, USD99.44
5. 80set, USD89.50
6. 100set, USD80.55
MOQ 1 starting wholesale item price USD99.44, air freight USD49.00, transportation cycle 14 days to 21 days to the door, support one generation
PS0DG-07. Video recording and Bluetooth communication smart helmet. Suitable for motorcycles, electric motorcycles, off-road vehicles, ATVs, road vehicles, and roller skating outdoor sports for safe riding.
Smart helmet model: PS0DG-07
Main material: ABS+PC+EPS
Head circumference size: 54-66cm, 640g
Battery capacity: : 3.7V-4.2V / 1800mAh
Camera lens DSP: AHD 1920x1080P
AI Bluetooth: WIFI+APP AI nagativtion AI Talking order
Bluetooth transmission: 8M-10M
Speaker: 2x0.5W (stereo)
Microphone: -35dB -41dB
Bluetooth mode: BT5.2+BLE4.2 (dual mode)
Electrical parameters: USB TYPE DC 5V/0.5A
Charging mode: plug-in charging port 3h
Intelligent voice/remote control dual-mode operating system: WIFI+APP, answering calls, sending and receiving SMS messages, receiving news broadcasts, voice navigation, MP3 music, connection flash control (left turn light, right turn light, double flash light)
Function car lights: MP3+ light battery life 6h, ARGB LED 9-color colorful tail lights + left/right turn signals> 20h
Operating System (iOS): Mac ios Android
Step Price (FOB):
1. Single price USD175.80
2.20set, USD73.85
3.40set, USD66.47
4.60set, USD59.82
5.80set, USD53.84
6.100set, USD48.46
MOQ 1 starting wholesale item price USD59.82, air freight USD49.00, transportation cycle 14 days to 21 days to the door, support one generation
Important notice!
Celebrate that our company has won the China Council for the Promotion of International Trade "Selected Brands for Domestic Products Exported to Erhai" enterprise certification in July 2022, China National Industrial Internet Logo Enterprise Certification, CCTV China Television Shopping "Recommended Products for Domestic Products Overseas Mall" and TikTok Mall Recommended products, facing the world TV broadcasts to share with consumers the promotions of China's high-quality, affordable and high-quality goods.
1. The whole store discount of smart helmet series products is 20% off.
2. The whole store discount of Bluetooth intercom headset series is 20% discount.
3. The whole store discount of driving recorder series products is 20% off
PSSY-032. Functional lighting bluetooth helmet. Suitable for safe riding in outdoor sports such as mountain bikes, rock climbing, road bikes, roller coasters, ATVs, electric motorcycles, electric motorcycles, off-road motorcycles, etc.
Functional headlight helmet Model: PSSY-032
Main material: PC+EPS
Head circumference size: 57-61cm, 310g
Battery capacity: 3.7V / 240mAh
Electrical parameters: USB TYPE DC 5V/1A
Charging mode: plug-in charging 1h
Working environment: -20 60
Battery life: 11h
Standby time: 180 days
Remote control mode operating system: connection flashing (left turn light, right turn light, double flashing light)
Function lights: light brightness 85 lumens, dazzling streamer lasts 1.5h, ARGB LED dazzling taillights + left/right turn signals>18h, turn signals turn off automatically after 10s, brake lights turn off automatically after 50s
Packing parameters:
Single product size: 284x230x150mm
Carton size: 290x238x160mm
Single product weight: 186g
Carton size: 540x460x555
Packing Quantity: 10SET
Packing net weight: 4.7 kg
Packing gross weight: 6kg
Step Price (FOB):
1. Single price USD115.70
2.20set, USD48.46
3.40set, USD43.61
4.60set, USD39.25
5.80set, USD35.33
6.100set, USD31.80
MOQ 1 starting wholesale item price USD39.25, air freight USD49.00, transportation cycle 14 days to 21 days to the door, support one generation
PS-V6. Smart video recording and lighting helmet. It is suitable for safe riding in outdoor sports such as mountain bikes, rock climbing, road bikes, roller scooters, ATVs, electric motorcycles, electric motorcycles, off-road motorcycles, bicycles, etc.
Bluetooth communication helmet model: PS-V6
Main material: PC+EPS
Head circumference size: S/M(54-58cm), M/L(58-62cm)
Battery capacity: 3.7V/400mAh
Camera lens DSP: AHD 1920x1080P
Photo resolution: 1280*720(2M)
Bluetooth transmission: 10M-12M
Speaker: 2x0.5W (stereo)
Microphone: -35dB -41dB
Bluetooth mode: BT5.2+BLE4.2 (dual mode)
Electrical parameters: USB TYPE DC 5V/0.5A
Charging mode: plug-in charging port 3h
Intelligent voice mode operating system: WIFI+APP, answering calls, sending and receiving text messages, receiving news broadcasts, voice navigation, MP3 music
Function lights: connected with flash control (left turn light, right turn light, double flashing light), ARGB LED 9-color colorful lights>10h
Operating System (iOS): Mac ios Android
Step Price (FOB):
1. Sample unit price USD292.30
2.20set, USD77.54
3.40set, USD69.79
4.60set, USD62.81
5.80set, USD56.53
6.100set, USD50.90
MOQ 1 starting wholesale item price USD62.81, air freight USD49.00, transportation cycle 14 days to 21 days to the door, support one generation
PS-RS1. Smart Bluetooth ski helmet. Suitable for men's/women's outdoor single-board double-board skiing and other snow fields such as skiing, skating, etc. Warm and breathable safety helmet.
Functional headlight helmet: PS-C21
Material: PC+ABS+EPS
Size: L57-62cm, 510g
Battery: 3.7V /1000mAh
Intercom function: PTT team real-time intercom
Smart Alert: SOS Location Rescue
Bluetooth transmission: 10M-12M
Speaker: 2x0.5W (stereo)
Microphone: -35dB -41dB
Bluetooth mode: BT5.2+BLE4.2 (dual mode)
Charging mode: Magnetic charging for 2h
Endurance time: 14-16h
Working temperature: -40- 55
Intelligent voice mode operating system: WIFI+APP, answering calls, voice navigation, MP3 music
Step Price (FOB):
1. Sample unit price USD323.08
2. 200set, USD193.85
3. 400set, USD174.47
4. 600set, USD157.02
5. 800set, USD141.32
6. 100set, USD127.19
PSHMC-0018. Professional football helmet. Suitable for outdoor sports such as ice hockey, hockey, land hockey, roller skating, etc.
Professional Football Helmet: PSHMC-001
Material: ABS+PC+EPS
Size: XL (58.5-63cm) L (57.5-60.5cm) M (54.5-
58.5cm) S (53.5-56.5cm)
Lining material: high-density cold-resistant, shock-absorbing, impact-resistant gasket
Product Certification: Has passed CE, EN1077:2007, CPSC/ASTM certification.
Important notice!
Celebrate that our company won the enterprise certification of the China Council for the Promotion of International Trade "Preferred Brands for Domestic Products Going to Erhai" in July 2022, CCTV China Television Shopping "Recommended Products for Domestic Products Going to Sea Mall" and TikTok Mall recommended products for global TV broadcasts, promotions to share with you 90 day cycle.
1. The whole store discount of smart helmet series products is 20% off.
2. The whole store discount of Bluetooth intercom headset series is 20% discount.
3. The whole store discount of bicycle light series products is 20% off.
Step Price (FOB):
1. Sample unit price USD118.46
2. 20set, USD71.08
3. 40set, USD63.97
4. 60set, USD57.57
5. 80set, USD51.81
6. 100set, USD46.63
PS-H19. New hockey/ice hockey helmet. Suitable for outdoor sports such as ice hockey, hockey, land hockey, roller skating, etc. The design of this helmet is that the polyester lens and the steel mesh shield can be attached and detached to each other. It is suitable for dual-use safety equipment such as hockey and land hockey.
Professional Hockey/Hockey Helmet: PS-H19
Main material: ABS+EPS.
Head circumference size: XL (60-62cm) L (58-60cm) M (56-
58cm) S (48-54cm).
Net weight of single product: 1500g.
Helmet colors: black, white, blue, pink, gray.
Lining material: high-density cold-resistant, shock-absorbing, impact-resistant gasket, high-grade sponge fleece lining is soft and comfortable.
Shield: [The lens is made of high-strength PC (polycarbonate) material, anti-ultraviolet, anti-fog, anti-scratch, anti-crack, anti-shatter; can wear myopia glasses; can be flipped up and down, detachable, replaceable shield ].
Product Certification: Has passed CE-EN1077, ASTM, CPSC/ASTM system certification.
Step Price (FOB):
1. Sample unit price USD107.70
2. 200set, USD64.61
3. 400set, USD58.15
4. 600set, USD52.34
5. 800set, USD47.11
6. 100set, USD42.40
PSSHM-011. Professional warm ski helmet. Suitable for skiing, skating, skateboarding, roller skating, BMX riding and other outdoor sports, the material is lightweight/warm/sturdy and anti-fall/multi-color optional, suitable for male/female adult single board/double board warm, breathable and safe ski protective gear. Product Certification: Has passed CE, EN1077:2007, CPSC/ASTM certification.
Professional Warm Ski Helmet: PSSHM-011.
Main material: ABS+EPS+velvet cotton.
Head circumference size: M54, 58cm, L58, 61cm.
Product Color: Matte Black, Matte White.
Features: Porous adjustable ventilation system (cold air introduction and hot air dissipation) to accelerate hot air discharge; material is lightweight/warm/sturdy and anti-fall/multi-color optional; ear pads are stitched with a woven logo on the outside, and a fan-shaped sandwich mesh with a seam on the inside Cloth, keeping warm while keeping breathable, dry and comfortable; Removable ear pads, humanized design Removable velvet lining insulation layer, ear pads, easy to clean; dial-type 360-degree adjustable knob on the back of the helmet, easy to adjust and tighten the head circumference The overall fit is more comfortable to ride; the elastic band fixing bracket for ski goggles is suitable for fixing ski goggles of different specifications.
Product Certification: Has passed CE, EN1077:2007, CPSC/ASTM certification.
Step Price (FOB):
1. The unit price of the sample is USD80.77
2.200set, USD48.46
3.400set, USD43.61
4.600set, USD39.25
5.800set, USD35.33
Remarks: Free shipping for sample unit price.
Important notice!
Celebrate that our company won the enterprise certification of the China Council for the Promotion of International Trade "Preferred Brands for Domestic Products Going to Erhai" in July 2022, CCTV China Television Shopping "Recommended Products for Domestic Products Going to Sea Mall" and TikTok Mall recommended products for global TV broadcasts, promotions to share with you 90 day cycle.
1. The whole store discount of smart helmet series products is 20% off.
2. The whole store discount of Bluetooth intercom headset series is 20% discount.
3. The whole store discount of bicycle light series products is 20% off.
PSSHM-009. Professional warm ski helmet. Suitable for outdoor sports such as skiing, skating, skateboarding, roller skating, BMX riding, etc. Lightweight and warm / strong and anti-fall / multi-color optional, suitable for men / women adult single board / double board warm, breathable and safe ski protective gear.
Professional Thermal Ski Helmet: PSSHM-009.
Main material: ABS+EPS+velvet cotton.
Head circumference size: M54, 58cm, L58, 61cm.
Product color: rubber blue, rubber black, rubber white, rubber purple.
Features: Design of wind-stop device, free switch to adjust the size of the air outlet; porous adjustable ventilation system (cold air introduction and hot air dissipation) to accelerate hot air discharge; woven character trademark is sewn on the outside of the ear pads, and fan-shaped sandwich mesh is added on the inside to keep warm at the same time. Keep breathable, dry and comfortable; detachable ear pads, humanized design, removable velvet lining insulation layer, ear pads, easy to clean; dial-type 360-degree adjustable knob on the back of the helmet, easy to adjust and tighten the overall fit of the head circumference, More comfortable to wear; Ski goggles elastic band fixing bracket, suitable for different specifications of ski goggles.
Product Certification: Has passed CE, EN1077:2007, CPSC/ASTM certification.
Step Price (FOB):
1. Sample unit price USD58.46
2.200set, USD35.08
3.400set, USD31.57
4.600set, USD28.41
5.800set, USD25.57
6. 100set, USD23.00
PSSHM-001. Professional warm ski helmet. Suitable for outdoor sports such as skiing, skating, skateboarding, roller skating, BMX riding, etc. Men/women adult single board/double board warm, breathable and safe ski protective gear.
Professional Warm Ski Helmet: PSSHM-001.
Main material: ABS+EPS+velvet cotton.
Head circumference size: S51-54cm, M54-58cm, L56-59cm, XL59-61cm.
Product Color: Black Stripe, Orange, Rose, Sky Blue, Matte Black, Matte White.
Features: Porous adjustable ventilation system (cold air intake and hot air distribution) to accelerate hot air discharge; woven-character trademark is sewn on the outside of the ear pads, and fan-shaped sandwich mesh is stitched on the inside to keep warm while keeping breathable, dry and comfortable; detachable ear pads inside, Humanized design Removable velvet lining insulation layer, ear pads, easy to clean; dial-type 360-degree adjustable knob on the back of the helmet, easy to adjust and tighten the head circumference for an overall fit, more comfortable riding; Ski goggles elastic band fixing bracket , suitable for fixing ski goggles of different specifications.
Product Certification: Has passed CE, EN1077:2007, CPSC/ASTM certification.
Step Price (FOB):
1. Sample unit price USD58.46
2.200set, USD35.08
3.400set, USD31.57
4.600set, USD28.41
5.800set, USD25.57
6.100set, USD23.00
PSSHM-001C. New high-end ski helmet. Suitable for outdoor sports such as skiing, skating, skateboarding, roller skating, BMX riding, etc., the material is lightweight/plush warmth/sturdy and anti-fall/multi-color optional, suitable for male/female adult single-board/double-board warm, breathable and safe ski protective gear equipment.
New high-end ski helmet: PSSHM-001C.
Main material: ABS+EPS+velvet cotton.
Head circumference size: M55, 58cm, L59, 61cm.
Product color: black, white.
Features: Porous adjustable ventilation system (cold air intake and hot air distribution) to accelerate hot air discharge; woven-character trademark is sewn on the outside of the ear pads, and fan-shaped sandwich mesh is stitched on the inside to keep warm while keeping breathable, dry and comfortable; detachable ear pads inside, Humanized design Removable velvet lining insulation layer, ear pads, easy to clean; dial-type 360-degree adjustable knob on the back of the helmet, easy to adjust and tighten the head circumference for an overall fit, more comfortable riding; Ski goggles elastic band fixing bracket , suitable for fixing ski goggles of different specifications.
Product Certification: Has passed CE, EN1077:2007, CPSC/ASTM certification.
Step Price (FOB):
1. Sample unit price USD80.77
2.200set, USD48.46
3.400set, USD43.61
4.600set, USD39.25
5.800set, USD35.33
6.100set, USD31.80
PSHM-014. Lightweight carbon fiber premium ski helmet. Suitable for outdoor sports such as skiing, skating, skateboarding, roller skating, BMX riding, etc., the material is lightweight/plush warmth/sturdy and anti-fall/multi-color optional, suitable for male/female adult single board/double board warm, breathable and safe skiing high level Protective gear. The carbon fiber texture is retained on the surface of the helmet, and varnish is used to enhance wear resistance and anti-trauma; the aerodynamic design reduces wind resistance, reduces air resistance, and is ventilated and breathable to improve riding texture.
High Grade Lightweight Carbon Fiber Ski Helmet: PSHM-014.
Main material: Carbon SheII+RIBTECH+EPS+velvet cotton.
Head circumference size: M (55-57cm, 400g), L (57-59cm, 380g), XL (60-62cm, 450g).
Product color: 4 color options.
Features: Carbon SheII+RIBTECH+EPS high-quality materials, combined with gluing process EPS integrated molding design; high-strength carbon fiber, organic fiber, multi-axial long fiber, twill carbon fiber composition; porous adjustable ventilation system (cold air intake and hot air distribution) , to speed up the heat exhaust; the outer/inner side of the ear pads are sewed with fan-shaped sandwich mesh to keep warm while keeping breathable, dry and comfortable; the suede sports-grade surface material ensures the wearer's comfort, and the inner ear pads are detachable, and the humanized design can be detached Velvet cotton lined with thermal insulation layer and ear pads, easy to clean; dial-type 360-degree adjustable knob on the back of the helmet, easy to adjust and tighten the head circumference for an overall fit, more comfortable riding; The standard ski goggles are fixed; the sleek appearance and the strip hole design are fashionable, beautiful, safe and easy to use.
Product Certification: Has passed CE, ASTMF2040, EN1077B, CPSC / ASTM certification.
Step Price (FOB):
1. Sample unit price USD269.23
2.200set, USD161.54
3.400set, USD145.39
4.600set, USD130.85
5.800set, USD117.77
6. 100set, USD105.99
PSBJL-0110. Intelligent Bluetooth driving record / voice voice control helmet. Suitable for bicycle, mountain bike, rock climbing, road bike, roller skating bike, electric motorcycle, scooter, roller skating, roller skating and other outdoor sports ultra-light and comfortable safety helmet. Dashcam, voice phone, MP3 / 4, left and right turn signals, warning lights, with lenses, with a hat brim, with a belt camera mounting seat.
functional parameter:
Function headlights, Bluetooth voice-controlled bicycle helmet PSBJL-0110
Main material: ABS + EPS integrated molding
Head circumference size: M (56-61cm) L (58-63cm)
Product color: black, white, red, and blue. Support the buyers to customize the color
The one-hand dial fixing system on the back of the helmet can easily adjust and tighten the overall fit of the head, and the soft chin cushion band improves the chin comfort
Battery capacity: 3.7V / 500 mAh
Resolution of the recorded video: 1,920 x1080P 30 FPS
Camera lens DSP: BuildWin JR3282S
Bluetooth transmission: 10M-12M
Speaker: 2x0.5W (sound)
Microphone: -35dB-41dB
Bluetooth mode: BT5.2+BLE4.2 (dual-mode)
Electrical parameters: USB TYPE DC 5V/0.5A
Charging mode: plug-in charging for 3h
Battery life time: 20h
Intelligent voice / remote control dual mode operating system: answer phone calls, sound navigation, MP3 music, connecting flash control (left turn light, right turn light, double flash light)
Function lights: MP3 + light life of 6h, ARGB LED dazzling tail light + left / right turn signal & gt; 10h
Has been certified by CE, CPSC / ASTM
Operating system (iOS): Macios Android
Step Price (FOB):
1. Unit price USD122.90
2.20set, USD51.69
3.40set, USD46.52
4.60set, USD41.87
5.80set, USD37.68
6.100set, USD33.91
MOQ 1 starting wholesale item price USD41.87, air freight USD49.00, transportation cycle 14 days to 21 days to the door, support one generation
PSBJL-0103. Smart Bluetooth Mountain road Bike riding helmet. Suitable for bicycle, mountain bike, rock climbing, road bike, roller skating bike, electric motorcycle, scooter, roller skating, roller skating and other outdoor sports ultra-light and comfortable safety helmet. Voice phone, MP3 / 4, left and right turn signal, warning light, with lenses, with a hat brim, with a dashcam installation base.
functional parameter:
Function headlights, Bluetooth voice-controlled bike helmet PSBJL-0103
Main material: ABS + EPS integrated molding
Head circumference size: M (56-61cm) L (58-63cm)
Product color: white and black, gray black, green. Support the buyers to customize the color
Bluetooth parameters: 5.0 Bluetooth connection control, one-key connection, convenient and fast
Battery capacity: 3.7V / 500 mAh
Bluetooth transmission: 10M-12M
Speaker: 2x0.5W (sound)
Microphone: -35dB-41dB
Bluetooth mode: BT5.2+BLE4.2 (dual-mode)
Electrical parameters: USB TYPE DC 5V/0.5A
Charging mode: plug-in charging for 3h
Battery life time: 20h
Intelligent voice / remote control dual mode operating system: answer calls, sound navigation, MP3 music, connecting flash control (left turn light, right turn light, double flash light)
Function lights: MP3 + light endurance 6h, ARGB LED dazzling tail light + left / right turn signal> 10h
Has been certified by CE, CPSC / ASTM
Operating system (iOS): Macios Android
The one-hand dial fixing system on the back of the helmet can easily adjust and tighten the overall fit of the head, and the soft chin cushion band improves the chin comfort
Magnetic goggles, stronger eye protection, facial sand resistance and insects
Step Price (FOB):
1. Unit price USD107.70
2.20set, USD45.20
3.40set, USD40.70
4.60set, USD36.60
5.80set, USD33.00
6.100set, USD29.70
MOQ 1 starting wholesale item price USD36.60, air freight USD49.00, transportation cycle 14 days to 21 days to the door, support one generation
PSMD-112. Function remote control lighting helmet. Suitable for bicycle, mountain bike, rock climbing, road bike, roller skating bike, electric motorcycle, scooter, roller skating, roller skating and other outdoor sports ultra-light and comfortable safety helmet.
product description:
1. The met process adopts PC + EPS integrated design to improve safety performance.
2. Manual remote control control to open left turn, turn right, double flash and other lighting functions.
3. High intensity of light prompts the rear car to keep an effective distance to ensure safe cycling.
4. Functional headlights: 6h, ARGB LED dazzling tail light + left / right turn signal & gt; 10h
5. The one-hand dial fixing system on the back of the helmet can easily adjust and tighten the overall fit of the head, and the soft chin cushion band improves the comfort of the chin.
6. Has passed the CE, CPSC / ASTM certification.
7. Head circumference size: M / L (54-61cm).
8. Product color: black, white, red, and blue. Support the buyers to customize the color
Step Price (FOB):
1. Unit price USD84.60
2.20set, USD35.64
3.40set, USD32.10
4.60set, USD28.87
5.80set, USD26.00
6.100set, USD23.40
MOQ 1 starting wholesale item price USD28.87, air freight USD49.00, transportation cycle 14 days to 21 days to the door, support one generation
PSJM-802. Intelligent Bluetooth driving record / voice voice control helmet. Suitable for bicycle, mountain bike, rock climbing, road bike, roller skating bike, electric motorcycle, scooter, roller skating, roller skating and other outdoor sports ultra-light and comfortable safety helmet.
Intelligent video, intelligent Bluetooth driving record / voice voice control city light riding helmet: PSJM-802
Material: PC + EPS integrated molding design to improve the safety performance
Size: 56-62cm, 420g
TYPE-C interface: Bluetooth 5.1
Battery voltage: 3.7V-4.2V
Video recording resolution: 1800 mAh, 103450
Camera lens DSP:F/NO.=2.0
Automatic cycle video recording: TF 8 ~ 64 G
Camera format: 1080P.AVI/ 720P.AVI
Video format: MJPEG
Bluetooth button: PWR/P.P/-CALL
Bluetooth transmission: above 8M
Speaker: 2x0.5W
Microphone: -35dB-41dB
Bluetooth mode: BT5.2+BLE4.2
Electrical parameters: USB TYPE DC 5V/0.5A
Charging mode: plug-in charging for 3h
Duration: 64 BG 6 h (video), BT 36h (playback)
Intelligent voice operating system: WIFI + APP, answering phone calls, MP3 4 music, connecting flash control (left turn lamp, right turn lamp, double flash lamp)
Function lights: left and right turn signal, warning light, MP3 4 + light life 6h, ARGB LED dazzling tail light + left right turn signal> 10h
Operating system (iOS): Mac ios Android
Has been certified by CE, CPSC ASTM
The one-hand dial fixing system on the back of the helmet can easily adjust and tighten the overall fit of the head, and the soft chin cushion band improves the chin comfort.
Step Price (FOB):
1. Unit price USD192.30
2.20set, USD80.80
3.40set, USD72.70
4.60set, USD65.40
5.80set, USD58.90
6.100set, USD53.00
MOQ 1 starting wholesale item price USD65.40, air freight USD49.00, transportation cycle 14 days to 21 days to the door, support one generation
PSFT-01. Smart Bluetooth voice voice control lighting bicycle helmet. Suitable for bicycle, mountain bike, rock climbing, road bike, roller skating bike, electric motorcycle, scooter, roller skating, roller skating and other outdoor sports ultra-light and comfortable safety helmet.
PSFT-01. Smart Bluetooth voice voice control lighting bicycle helmet. Suitable for bicycle, mountain bike, rock climbing, road bike, roller skating bike, electric motorcycle, scooter, roller skating, roller skating and other outdoor sports ultra-light and comfortable safety helmet.
Smart Bluetooth voice voice control lighting bicycle helmet: PSFT-01
Material: PC + EPS + MIPS integrated design improves safety performance
Size: M 55-68cm, L 58-61cm, 270g
TYPE-C interface: Bluetooth 5.1
Battery voltage: 3.7V-4.2V
Bluetooth button: PWR.P.P-CALL
Bluetooth transmission: above 8M
Speaker: 2x0.5W
Microphone: -35dB-41dB
Bluetooth mode: BT5.2+BLE4.2
Electrical parameters: USB TYPE DC 5V 0.5A
Charging mode: plug-in charging for 3h
Duration: 64 BG 6 h (video), BT 36h (playback)
Intelligent voice operating system: WIFI + APP, answering phone calls, MP3 4 music, connecting flash control (left turn lamp, right turn lamp, double flash lamp)
Functional lights: left and right white lights in front of the helmet, left and right turn signals in the rear, warning lights, MP3 4 + light life of 6h, ARGB LED dazzling tail lights + left / right turn signal> 10h
Operating system (iOS): Mac ios Android
Has been certified by CE, CPSC ASTM
The one-hand dial fixing system on the back of the helmet can easily adjust and tighten the overall fit of the head, and the soft chin cushion band improves the chin comfort.
Step Price (FOB):
1. Unit price USD200.00
2.20set, USD84.00
3.40set, USD75.60
4.60set, USD68.00
5.80set, USD61.20
6.100set, USD55.08
MOQ 1 starting wholesale item price USD68.00, air freight USD49.00, transportation cycle 14 days to 21 days to the door, support one generation
More categories of commodity specifications and preferential policies, welcome letters to letter to consult business.
PSKJ-001. Smart Bluetooth electric motorcycle riding helmet. Suitable for electric motorcycle, bicycle, mountain bike, rock climbing, road car, roller skating car, motorcycle, scooter, roller skating and other outdoor sports ultra-light and comfortable safety helmet.
functional parameter:
Function headlights, Bluetooth voice-controlled bicycle helmet PSKJ-001
Main material: ABS + EPS integrated molding
Head circumference size: M / L 57-61cm
Product color: elegant white, advanced gray, PC optical hd goggles piece. Support the buyers to customize the color
Bluetooth parameters: 5.0 Bluetooth stereo sound, wind protection and noise microphone, stable call, clear navigation, one-key control, convenient and fast
Battery capacity: 3.7V / 500 mAh
Bluetooth transmission: 10M-12M
Speaker: 2x0.5W (sound)
Microphone: -35dB-41dB
Bluetooth mode: BT5.2+BLE4.2 (dual-mode)
Electrical parameters: USB TYPE DC 5V/0.5A
Charging mode: plug-in charging for 3h
Battery life time: 15h
Standby time: 30h
Waterproof grade: IPX 4
Bluetooth communication mode operating system: answer the phone, voice-controlled navigation, MP3-4 music
The strong helmet has high strength and impact resistance, the one-handed dial fixing system on the back of the helmet can easily adjust and tighten the overall fit of the head, and the soft chin cushion improves the comfort of the chin
Has been certified by CE, CPSC / ASTM
Operating system (iOS): Macios Android.
Step Price (FOB):
1. Unit price USD88.60
2.20set, USD37.06
3.40set, USD33.35
4.60set, USD30.00
5.80set, USD27.00
6.100set, USD24.30
MOQ 1 starting wholesale item price USD30.00, air freight USD49.00, transportation cycle 14 days to 21 days to the door, support one generation
Step Price (FOB):
1. Sample unit price USD80.77
2. 200set, USD48.46
3. 400set, USD43.61
4. 600set, USD39.25
5. 800set, USD35.33
6. 100set, USD31.80
PST6 PLUS Motorcycle Bluetooth walkie-talkie (headset). Suitable for snowmobile/ATV/off-road vehicle riders such as full-face helmet/half-helmet/unmasked helmet/pulling helmet/antique helmet. Compatible with other Bluetooth walkie-talkies, 5-person group connection intercom calls, the longest distance is 1500m, the talk time is 10H, IP67 waterproof and worry-free riding, HD high-definition quality audio transmission.
Compatible with other Bluetooth walkie-talkies 5-person group intercom call/Chinese and English switching/2-person intercom distance 700 meters/wireless security controller (with handlebars installed)/voice call/stereo music/volume control/playback control
Bluetooth intercom headset model: PST6 PLUS
Main material: ABS+PVC
Battery capacity: 3.7V / 850mAh
Working voltage: 3.0V-4.2V
Talk time: 20h
Standby time: 500h
Charging time: 3h
Electrical parameters: USB TYPE DC 5V/1.5mA
Radio frequency range: FM87.5~108MHz
Bluetooth protocol: A2DP, AVRCP, HS/HF
Transmit power: 20dBm (100mW)
Intercom function: 5 people group real-time intercom
Speakers: 2x2.5W (stereo)
Microphone: 88dBm
Bluetooth mode: BT5.1
Intercom distance: 1500M
Bluetooth transmission: 50M
Charging mode: plug-in charging for 3h
Waterproof grade: IP65
Working temperature: -30 +60
Operating System (iOS): Mac ios Android
single pack:
Carton size 230*160*48mm,
Single box gross weight 488g,
Single box: gross weight 10.4kg,
Single box size 48.5*26*34.5cm,
20 units per box.
PS02D-1080P AI smart helmet. (Embedded bluetooth speaker, camera, LED brake light, WIFI App, intercom headset, gravity induction magnetic shading). Suitable for safe riding in outdoor sports such as motorcycles/electric motorcycles/bicycles/mountain bikes/scooters/road bikes. Size: L58-62cm
Smart Helmet Model: PS02D-1080P
Main material: PC+EPS
Head circumference size: 58-62cm, 520g
Battery capacity: 3.7V / 1200mAh
Video resolution: 1080FHD 1920x1080
Camera lens DSP: BuildWin JR3282S
Bluetooth transmission: 10M-12M
Speaker: 2x0.5W (stereo)
Microphone: -35dB -41dB
Bluetooth mode: BT5.2+BLE4.2 (dual mode)
Electrical parameters: USB TYPE DC 5V/0.5A
Charging mode: plug-in charging port 3h
Duration: 64BG 6h (recording), BT 36h (playing)
Intelligent voice/remote control dual-mode operating system: WIFI+APP, answering calls, voice navigation, MP3 music, connection flash control (left turn light, right turn light, double flash light)
Function lights: MP3+ light battery life 6h, ARGB LED colorful tail lights + left/right turn signals>10h
Operating System (iOS): Mac ios Android
Step Price (FOB):
1. Single price USD246.20
2. 20set, USD103.39
3. 40set, USD93.05
4. 60set, USD83.75
5. 80set, USD75.38
6. 100set, USD67.84
MOQ 1 starting wholesale item price USD83.75, air freight USD49.00, transportation cycle 14 days to 21 days to the door, support one generation
PS02D-720P Smart Video and Intercom Bluetooth Helmet. (Embedded bluetooth speaker, camera, LED brake light, WIFI App, intercom headset, gravity induction magnetic shading). Suitable for motorcycles, electric motorcycles, bicycles, mountain bikes, scooters, road cars and other outdoor sports safe riding. L58-62cm.
Bluetooth function:
1. Processor: ATS3015.
2. Mode: EDR+BLE dual mode.
3. Resolution of recorded video: 720P interpolated to 1920x1080 30 FPS;
4. Video format: AVI;
5. Video compression format: MJPEG;
6. Photo resolution: 10M 3920x2940;
7. Storage: Micro SD (up to 64G, excluding memory card);
8. Light source frequency: 50Hz/60Hz;
9 Operating System (OS): Windows XP/Vista or above/Win7/Mac os. ;
10. Lithium polymer battery: 1200mAh;
11. Charging connector: USB TYPE C 5V DC charging;
12. Charging time: 3 hours;
13. Vent: 4pc;
14. Waterproof: IPX5;
15. Battery life: 10 hours for security lights, 36 hours for BT music playback, 3-6 hours for camera video recording.
BT Function:
Processor:ATS3015.
Mode:EDR+BLE dual mode.
Hand free speakers support:accept/reject phone call, redail, incoming number reading, BT music playing, Navigation audio brocasting, other APPS audio brocasting.
Step Price (FOB):
1. Sample unit price USD230.70
2. 200set, USD96.92
3. 400set, USD87.23
4. 600set, USD78.51
5. 800set, USD70.66
6.100set, USD63.60
MOQ 1 starting wholesale item price USD78.51, air freight USD49.00, transportation cycle 14 days to 21 days to the door, support one generation
PSEV-021. Bluetooth communication and voice-controlled Bluetooth helmet. It is suitable for safe riding in outdoor sports such as bicycles, mountain bikes, scooters, roller skating, electric motorcycles, rock climbing, road bikes, etc.
Smart Helmet Model: PSEV-021
Material: ABS+EPS
Size: M54-58cm, 320g L58-62cm, 340g
Battery: 3.7V/600mAh
Video resolution: 1080FHD 1920x1080
Intercom function: multi-person group real-time intercom
Smart Alert: SOS Location Rescue
Bluetooth transmission: 10M-12M
Speaker: 2x0.5W (stereo)
Microphone: -35dB -41dB
Bluetooth mode: BT5.2+BLE4.2 (dual mode)
Electrical parameters: USB TYPE DC 5V/0.5A
Charging mode: Magnetic charging port 3h
Standby time: 180 days
Intelligent voice/remote control dual-mode operating system: AWIFI+APP, answering calls, voice navigation, connection flashing (left turn light, right turn light, double flashing light), MP3 music
Function lights: MP3+ light battery life 6h,ARGB LED colorful tail light+left/right turn signal>10h
Operating System (iOS): Mac ios Android
To achieve substantive business transactions, and enjoy more preferential policies
Step Price (FOB):
1. Single price USD215.38
2. 20set, USD129.23
3. 40set, USD116.31
4. 60set, USD104.68
5. 80set, USD94.21
6. 100set, USD84.79
PSSH-55M. Bluetooth communication and multi-person intercom Bluetooth helmet. It is suitable for safe riding in outdoor sports such as bicycles, mountain bikes, scooters, roller skating, electric motorcycles, rock climbing, road bikes, etc.
Smart helmet model: PSSH-55M
Main material: PC+EPS
Head circumference size: 55-59cm, 310g
Battery capacity: 3.7V / 450mAh (1.665WH)
Video resolution: 1080FHD 1920x1080
Intercom function: multi-person group real-time intercom
Smart Alert: SOS Location Rescue
Bluetooth transmission: 10M-12M
Speaker: 2x0.5W (stereo)
Microphone: -35dB -41dB
Bluetooth mode: BT5.2+BLE4.2 (dual mode)
Electrical parameters: USB TYPE DC 5V/0.5A
Charging mode: Magnetic charging port 3h
Standby time: 180 days
Intelligent voice/remote control dual-mode operating system: WIFI+APP, answering calls, voice navigation, connection flashing (left turn light, right turn light, double flashing light), MP3 music
Function lights: MP3+ light battery life 6h, ARGB LED colorful tail light+left/right turn signal>10h
Operating System (iOS): Mac ios Android
Step Price (FOB):
1. Single price USD230.80
2. 20set, USD96.92
3. 40set, USD87.23
4. 60set, USD78.51
5. 80set, USD70.66
6. 100set, USD63.59
MOQ 1 starting wholesale item price USD78.51, air freight USD49.00, transportation cycle 14 days to 21 days to the door, support one generation
PSBH-60SEneo. Sports camera and SOS for help, Bluetooth intercom communication smart helmet. Suitable for bicycles, mountain bikes, scooters, roller skating, electric motorcycles, rock climbing, road bikes and other outdoor sports safe riding.
Smart Helmet Model: PSBH-60SEneo
Main material: PC+EPS
Head circumference size: 55-61cm, 280g
Battery capacity: 3.7V / 450mAh (1.665WH)
Video resolution: 1080FHD 1920x1080
Intercom function: multi-person group real-time intercom
Smart Alert: SOS Location Rescue
Bluetooth transmission: 10M-12M
Speaker: 2x0.5W (stereo)
Microphone: -35dB -41dB
Bluetooth mode: BT5.2+BLE4.2 (dual mode)
Electrical parameters: USB TYPE DC 5V/0.5A
Charging mode: Magnetic charging port 3h
Standby time: 180 days
Intelligent voice/remote control dual-mode operating system: APP connection, answering calls, voice navigation, connection flashing (left turn light, right turn light, double flashing light), MP3 music
Function lights: MP3+ light battery life 6h, ARGB LED colorful tail light+left/right turn signal>10h
Operating System (iOS): Mac ios Android
Step Price (FOB):
1. Single price USD346.10
2. 20set, USD145.39
3. 40set, USD130.85
4. 60set, USD117.77
5. 80set, USD105.99
6. 100set, USD95.39
MOQ 1 starting wholesale item price USD117.77, air freight USD49.00, transportation cycle 14 days to 21 days to the door, support one generation
single pack
Carton size: 300*240*175MM
Product gross weight: 0.71KG
Packing size: 620*385*495mm
Gross packing weight: 6.5kg
Packing Quantity: 8 Pieces
PSBH-60SEneo. Sports camera and SOS for help, Bluetooth intercom communication smart helmet. It is suitable for safe riding in outdoor sports such as bicycles, mountain bikes, scooters, roller skating, electric motorcycles, rock climbing, road bikes, etc.
Smart Helmet Model: PSBH-62SEneo
Main material: PC+EPS
Head circumference size: 55-61cm, 310g
Battery capacity: 3.7V / 450mAh (1.665WH)
Video resolution: 1080FHD 1920x1080
Intercom function: multi-person group real-time intercom
Smart Alert: SOS Location Rescue
Bluetooth transmission: 10M-12M
Speaker: 2x0.5W (stereo)
Microphone: -35dB -41dB
Bluetooth mode: BT5.2+BLE4.2 (dual mode)
Electrical parameters: USB TYPE DC 5V/0.5A
Charging mode: Magnetic charging port 3h
Standby time: 180 days
Intelligent voice/remote control dual-mode operating system: WIFI+APP, answering calls, voice navigation, connection flashing (left turn light, right turn light, double flashing light), MP3 music
Function lights: MP3+ light battery life 6h, ARGB LED colorful tail light+left/right turn signal>10h
Operating System (iOS): Mac ios Android
Step Price (FOB):
1. Single price USD500.00
2. 20set, USD210.00
3. 40set, USD189.00
4. 60set, USD170.10
5. 80set, USD153.09
6. 100set, USD137.80
MOQ 1 starting wholesale item price USD170.10, air freight USD49.00, transportation cycle 14 days to 21 days to the door, support one generation
PS-V6. Smart video recording and lighting helmet. It is suitable for safe riding in outdoor sports such as mountain bikes, rock climbing, road bikes, roller scooters, ATVs, electric motorcycles, electric motorcycles, off-road motorcycles, bicycles, etc.
Bluetooth communication helmet model: PS-V6
Main material: PC+EPS
Head circumference size: S/M(54-58cm), M/L(58-62cm)
Battery capacity: 3.7V/400mAh
Camera lens DSP: AHD 1920x1080P
Photo resolution: 1280*720(2M)
Bluetooth transmission: 10M-12M
Speaker: 2x0.5W (stereo)
Microphone: -35dB -41dB
Bluetooth mode: BT5.2+BLE4.2 (dual mode)
Electrical parameters: USB TYPE DC 5V/0.5A
Charging mode: plug-in charging port 3h
Intelligent voice mode operating system: WIFI+APP, answering calls, sending and receiving text messages, receiving news broadcasts, voice navigation, MP3 music
Function lights: connected with flash control (left turn light, right turn light, double flashing light), ARGB LED 9-color colorful lights>10h
Operating System (iOS): Mac ios Android
Step Price (FOB):
1. Sample unit price USD185.70
2. 20set, USD77.54
3. 40set, USD69.79
4. 60set, USD62.81
5. 80set, USD56.53
6. 100set, USD50.90
MOQ 1 starting wholesale item price USD62.81, air freight USD49.00, transportation cycle 14 days to 21 days to the door, support one generation
PSBJL-238.Bluetooth function lighting helmet. It is suitable for safe riding in outdoor sports such as bicycles, mountain bikes, scooters, roller skating, electric motorcycles, rock climbing, road bikes, etc.
Bluetooth helmet model: PSBJL-238
Main material: ABS+EPS split molding
Head circumference size: S/M(51-58cm) M/L(58-61cm)
Battery capacity: 3.7V/500mAh
Bluetooth transmission: 10M-12M
Speaker: 2x0.5W (stereo)
Microphone: -35dB -41dB
Bluetooth mode: BT5.2+BLE4.2 (dual mode)
Electrical parameters: USB TYPE DC 5V/0.5A
Charging mode: plug-in charging port 3h
Battery life: 20h
Intelligent voice mode operating system: WIFI+APP, answering calls, voice navigation, connection flashing (left turn light, right turn light, double flashing light), MP3 music
Function lights: MP3+ light battery life 6h, ARGB LED colorful tail lights + left/right turn signals>10h
Operating System (iOS): Mac ios Android
Step Price (FOB):
1. Unit price USD123.10
2.20set, USD51.69
3.40set, USD46.52
4.60set, USD41.87
5.80set, USD37.68
6.100set, USD33.91
MOQ 1 starting wholesale item price USD41.87, air freight USD49.00, transportation cycle 14 days to 21 days to the door, support one generation
PSBJL-116.Bluetooth function lighting helmet. It is suitable for safe riding in outdoor sports such as bicycles, mountain bikes, scooters, roller skating, electric motorcycles, rock climbing, road bikes, etc.
Bluetooth helmet model: PSBJL-116
Main material: PC+EPS one-piece molding
Head circumference size: S/M(51-58cm) M/L(58-61cm)
Battery capacity: 3.7V/600mAh
Bluetooth transmission: 10M-12M
Speaker: 2x0.5W (stereo)
Microphone: -35dB -41dB
Bluetooth mode: BT5.2+BLE4.2 (dual mode)
Electrical parameters: USB TYPE DC 5V/0.5A
Charging mode: plug-in charging port 3h
Battery life: 20h
Intelligent voice mode operating system: WIFI+APP, answering calls, voice navigation, connection flashing (left turn light, right turn light, double flashing light), MP3 music
Function lights: MP3+ light battery life 6h, ARGB LED colorful tail lights + left/right turn signals>10h
Operating System (iOS): Mac ios Android
Step Price (FOB):
1. Single price USD153.90
2.20set, USD64.61
3.40set, USD58.15
4.60set, USD52.34
5.80set, USD47.11
6.100set, USD42.40
MOQ 1 starting wholesale item price USD52.34, air freight USD49.00, transportation cycle 14 days to 21 days to the door, support one generation
PSSH-50L. Functional headlight helmet. It is suitable for safe riding in outdoor sports such as bicycles, mountain bikes, scooters, roller skating, electric motorcycles, rock climbing, road bikes, etc.
Functional headlight helmet: PSBH-51Mneo
Main material: PC+EPS
Head circumference size: 57-61cm, 310g
Battery capacity: 3.7V / 450mAh (1.665WH)
Electrical parameters: USB TYPE DC 5V/0.5A
Charging mode: Magnetic charging for 2h
Battery life: 4-6h
Function lights: light-sensing mode (fast flash, tide), constant light mode (burst flash), automatic brake warning light, MP3+ light lasting 6h, ARGB LED colorful tail light+left/right turn signal>10h
To achieve substantive business transactions, and enjoy more preferential policies
Step Price (FOB):
1.Single price USD80.77
2. 20set, USD48.46
3. 40set, USD43.61
4. 60set, USD39.25
5. 80set, USD35.33
6. 100set, USD31.80
PSSH-20. Bluetooth talking helmet. Suitable for bicycles, mountain bikes, balance cars, scooters, pulleys, electric motorcycles, road cars and other outdoor sports to ride safely.
Smart Bluetooth Helmet: PSSH-20
Material: PC+EPS
Size: L58-62cm, 220g
Battery: 3.7V/400mAh
Intelligent warning: GPS positioning rescue + SOS alarm
Bluetooth transmission: 10M-12M
Speaker: 2X1W (stereo)
Microphone: -39dB -41dB
Bluetooth mode: BT4.1
Electrical parameters: USB TYPE DC 5V/0.5A
Charging mode: Micro USB 3h
Battery life: 4-6h
Three-button operating system: power on (play, pause, power off), volume + (next song), volume - (previous song), answering calls, voice navigation, connection flash (left turn light, right turn light, double flashing light), MP3 music
To achieve substantive business transactions, and enjoy more preferential policies
Step Price (FOB):
1. Single price USD64.62
2. 20set, USD38.77
3. 40set, USD34.89
4. 60set, USD31.40
5. 80set, USD28.26
6. 100set, USD25.43
PS-C21. Functional headlight helmet. Suitable for bicycles, mountain bikes, balance cars, scooters, pulleys, electric motorcycles, road cars and other outdoor sports to ride safely.
Functional headlight helmet: PS-C21
Material: PC+EPS
Size: L57-61cm, 190g
Battery: 3.7V /450mAh
Speaker: 2X1W (stereo)
Microphone: -39dB -41dB
Electrical parameters: USB TYPE DC 5V/0.5A
Charging mode: Magnetic charging for 2h
Battery life: 4-6h
Function lights: automatic brake warning light, light sensing mode (fast flash, tidal), constant light mode (strobe), MP3 + light life 6h, ARGB LED colorful taillight + left/right turn signal>10h
Three-button operating system: power on (play, pause, power off), volume + (next song), volume - (previous song), answering calls, voice navigation, connection flash (left turn light, right turn light, double flashing light), MP3 music
To achieve substantive business transactions, and enjoy more preferential policies
Step Price (FOB):
1.Single price USD143.08
2. 20set, USD85.85
3. 40set, USD77.27
4. 60set, USD69.54
5. 80set, USD62.59
6. 100set, USD56.33
Single product packaging:
Carton size: 310*250*190mm
Product gross weight: 0.64KG
Packing size: 610*360*495mm
Gross packing weight: 7 kg
Packing Quantity: 8 pieces
PSSHM-014. Lightweight ski helmet with animal print. Suitable for outdoor sports such as skiing, skating, skateboarding, roller skating, BMX riding, etc., the material is lightweight/plush warmth/sturdy and anti-fall/multi-color optional, suitable for male/female adult single-board/double-board warm, breathable and safe ski protective gear equipment. Different colors are matched with animal figure prints, love animals, and get close to nature.
New animal print lightweight ski helmet: PSSHM-014.
Main material: ABS+EPS+velvet cotton.
Head circumference size: S(51-54cm), M(55-58cm), L(59-61cm).
Product color: black dog, white rabbit, pink cat, white dog, white eagle, black eagle.
Features: Porous adjustable ventilation system (cold air introduction and hot air distribution) to accelerate hot air discharge; woven logo is sewn on the outside of the ear pads, and fan-shaped sandwich mesh is stitched on the inside to keep warm while keeping breathable, dry and comfortable; dial-type 360 �?�¢??�?�¢??on the back of the helmet The adjustable knob can easily adjust and tighten the overall fit of the head circumference, making it more comfortable to ride; the elastic band fixing bracket for ski goggles is suitable for fixing ski goggles of different specifications.
Product Certification: Has passed CE, EN1077:2007, CPSC/ASTM certification.
Single product carton: 25*27*25cm
Single product net weight: 480g
Product carton: 127*53*29cm
Carton weight: 9.6kg
Packing Quantity: 10pcs
Step Price (FOB):
1. Sample unit price USD80.77
2.200set, USD48.46
3.400set, USD43.61
4.600set, USD39.25
5.800set, USD35.33
6. 100set, USD31.80
PSSHM-015. Camouflage fish print light ski helmet. Suitable for outdoor sports such as skiing, skating, skateboarding, roller skating, BMX riding, etc., the material is lightweight/plush warmth/sturdy and anti-fall/multi-color optional, suitable for male/female adult single-board/double-board warm, breathable and safe ski protective gear equipment.
New camouflage fish print lightweight ski helmet: PSSHM-015.
Main material: ABS+EPS+velvet cotton.
Head circumference size: M(54-57cm), L(58-61cm).
Product color: military soul camouflage fish shape, pink camouflage fish shape.
Features: Porous adjustable ventilation system (cold air introduction and hot air distribution) to accelerate hot air discharge; woven logo is sewn on the outside of the ear pads, and a fan-shaped sandwich mesh is stitched on the inside to keep warm while keeping breathable, dry and comfortable; Removable ear pads inside, Humanized design Removable velvet lining insulation layer, ear pads, easy to clean; dial-type 360-degree adjustable knob on the back of the helmet, easy to adjust and tighten the head circumference for an overall fit, more comfortable riding; Ski goggles elastic band fixing bracket , suitable for fixing ski goggles of different specifications.
Product Certification: Has passed CE, EN1077:2007, CPSC/ASTM certification.
Single product carton: 25x27x25cm
Single product net weight: 380g
Product carton: 127x53x29cm
Carton weight: 9.60kg
Packing Quantity: 10pcs
Step Price (FOB):
1. Sample unit price USD80.77
2.200set, USD48.46
3.400set, USD43.61
4.600set, USD39.25
5.800set, USD35.33
6.100set, USD31.80
PSHM-011. Lightweight premium ski helmet. Suitable for outdoor sports such as skiing, skating, skateboarding, roller skating, BMX riding, etc., the material is lightweight/plush warmth/sturdy and anti-fall/multi-color optional, suitable for male/female adult single-board/double-board warm, breathable and safe ski protective gear equipment.
New lightweight premium ski helmet: PSHM-011W.
Main material: ABS+PC+EPS+velvet cotton.
Head circumference size: S (51-55cm, 380g), M (55-59cm, 400g), L (59-61cm, 450g).
Product color: 8 optional colors.
Features: ABS+PC+EPS one-piece design; porous adjustable ventilation system (cold air introduction and hot air dissipation) to accelerate hot air discharge; the outer/inner side of the ear pads are sewed with fan-shaped sandwich mesh to keep warm while keeping breathable, dry and comfortable; detachable ear pads inside, Humanized design Removable velvet lining insulation layer, ear pads, easy to clean; dial-type 360-degree adjustable knob on the back of the helmet, easy to adjust and tighten the head circumference for an overall fit, more comfortable riding; Ski goggles elastic band fixing bracket , suitable for fixing ski goggles of different specifications.
Product Certification: Has passed CE, ASTMF2040, EN1077B, CPSC / ASTM certification.
Step Price (FOB):
1. Sample unit price USD64.62
2.200set, USD38.77
3.400set, USD34.89
4.600set, USD31.40
5.800set, USD28.26
6. 100set, USD25.43
EAN
Product code: PS345
Trade name: PS345. Car wireless charger (with automatic motor induction). Support for mobile phone automatic clamping, with a motor. Support for 10W wireless charging.
Accessories: 3 M glue suction seat + air outlet. Note: automatic induction motor, the car will be very tight when bumping.
joggle:Micro
Input: 5V/2A,9V/1.67A
Output: 15W/10W/7.5W/5W (mobile phone)
Compatibility: Support for 4-to 6.5-inch mobile phones with wireless charging function
Product material: PC + galvanized parts; material drying grain + oil spray
Product color: black
Step Price (FOB):
1. Sample unit price, USD27.10
2. 100set, USD16.20
3. 200set, USD14.60
4. 300set, USD13.20
5. 400set, USD11.80
EAN
Product code: PS366
Trade name: PS366. Car wireless charger (with automatic motor induction). Support for mobile phone automatic clamping, with a motor. Support 10 WE wireless charging, over the QI motherboard, with a large bracket. (With QI certificate). Note: Automatic induction motor, the car will be very tight when bumping.
Interface: Type C
Input: 5V/2A,9V/1.67A
Output: 15W/10W/7.5W/5W (mobile phone)
Compatibility: Support for 4-to 6.5-inch mobile phones with wireless charging function
Product material: ABS + drying PC + acrylic;
Product color: black + gray
Step Price (FOB):
1. Sample unit price, USD30.60
2. 100set, USD18.40
3. 200set, USD16.50
4. 300set, USD14.90
5. 400set, USD13.40
EAN
Product code: PS318
Trade name: PS318. Car wireless charger (with automatic motor induction). Support for mobile phone automatic clamping, with a motor. Support 10W wireless charging, domestic motherboard, with a large bracket. (With a QI certificate). Note: The automatic induction motor, the car will also be very tight when bumping.
joggle:Micro
Input: 5V/2A,9V/1.67A
Output: 10W/7.5W/5W (mobile phone)
Compatibility: Support for 4-to 6.5-inch mobile phones with wireless charging function
Product material: ABS + PC + galvanized; material drying grain + oil injection
Product color: Black
Step Price (FOB):
1. Sample unit price, USD25.50
2. 100set, USD15.30
3. 200set, USD13.80
4. 300set, USD12.40
5. 400set, USD11.20
EAN
Product code: PS469
Trade name: PS469. Car wireless charger (with automatic motor induction). Support for mobile phone automatic clamping, with a motor. Support 15W wireless charging, with battery, with backlight.(With a QI certificate).
size of product
Interface: Type-C
Input: 5V/3A,9V/2A,12V/1.5A
Output: 15W/10W/7.5W/5W
Receiver: 9V / 2A
Compatibility: Support for mobile phones with wireless charging function
Product material: plastic + mirror PC + hardware
Product color: black, silver
Step Price (FOB):
1. sample unit price USD40.00
2. 100set, USD24.00
3. 200set, USD21.60
4. 300set, USD19.40
5. 400set, USD17.50
EAN
Product code: PS458
Trade name: PS458. Car wireless charger (with automatic motor induction). Support for mobile phone automatic clamping, with a motor. Support for 15W wireless charging. Air air outlet + large suction cup bracket.
Interface: Type-C
Input: 5V / 2A, 9V / 1.67A
Output: 10W/7.5W/5W (mobile phone)
Compatibility: Support for wireless charging feature of mobile phones
Product material: ABS + silicone + rubber oil process
Product color: black
Step Price (FOB):
1. sample unit price USD29.80
2. 100set, USD17.90
3. 200set, USD16.10
4. 300set, USD14.50
5. 400set, USD13.00
SPU PSMT071417
Trade name: FOR Yamaha Motorcycle Headlights(For Yamaha FZ07 MT07 2015-2017 Motorcycle Hi/Lo Beam DRL LED Headlight Projector for MT 07 FZ 07)
Height: 251mm / 9.88 in
Width: 224 mm / 8.82 in
Depth: 165 mm / 6.50 in
Color temperature: 6000~6500K
Theoretical power: high beam 92W, low beam 42W
Theoretical lumen: high beam 4500 lm, low beam 2100 lm
Operating voltage: 12V DC
Reference Price (FOB)
1. Single product price, USD310.00
2. 6set, USD185.30
3. 12set, USD166.80
4. 24set, USD150.10
5. 48set, USD135.10
SPU PSMS-G310M
Trade name: FOR BMW Motorcycle Headlamp. (FOR BMW G310GS, G310RLED Headlamp Assembly, E-Mark Approved DRL)
Product name: Motorcycle LED headlights
Height: 150.8 mm / 5.94 in
Width: 228.3 mm / 8.99 in
Depth: 100mm / 3.94 in
Color temperature: 6000-6500K
Theoretical power: high beam 90W, low beam 30W
Theoretical lumen: high beam 5400 lm, low beam 2400 lm
Actual power: high light 54W, low light 24W
Actual lumen: high beam 2055 lm, low beam 1029 lm
Position lamp: 4.8W
Reference Price (FOB)
1. Single product price, USD180.20
2.8set, USD162.10
3.16set, USD146.00
4.32set, USD131.30
5.64set, USD118.20
Support a single product one generation hair
More wholesale procurement preferential policies, welcome the letter to consult the business
SPU PSMS-G2001D
Trade name: FOR Harley gliding motorcycle headlights. (Dual LED projector headlights with Angle eyes for Harley Davidson Harley Road glide 2004-2014 FLTRModel)
Cups option:Chorm/Black /Black and chorm DRL WHITE
High Beam led and Lumen: 9LEDX5W, 3150LM
Low beam Led and Lumen: 6LEDX5W, 1600 LM
IP : IP65 Ring Color: lens Material:PC
Housing Material :Aluminum
Reference Price (FOB)
1. Single product price, USD272.80
2.4set, USD163.70
3.8set, USD147.30
4.16set, USD132.60
5.32set, USD119.30
Support single product "one generation" order business
More wholesale procurement preferential policies, welcome the letter to consult the business
SPU: PSMT091416
Trade name: FOR Yamaha motorcycle headlights.(FOR Yamaha MT09. Morsun Motorcycle LED headlight is YAMAHA MT09 FZ09 2014-2016 Hi, Lo beam headlight 7)
Height: 196 mm, 7.72 inches
Width: 257 mm, 10.1 inch
Depth: 153 mm, 6.02 in
Color temperature: 6000,6500K
Theoretical power: high beam 92W, low beam 42W
Theoretical lumen: far light 4500 lm, near light 2100 lm
Operating voltage: 12V DC
Reference Price (FOB)
1. Single product price, USD310.00
2. 6set, USD185.30
3. 12set, USD166.80
4. 24set, USD150.10
5. 48set, USD135.10
Support single product "one generation" order business
More wholesale procurement preferential policies, welcome the letter to consult the business
SPU PSMS-FG30ID
Trade name: 4.5-inch FOR Harley motorcycle fog lamp. (4.5-inch Motorcycle LED Fog Light with DRL FOR Harley-Electra Sliding Ultra Classic LED Fog Light with DOT Approved)
Diameter: 111.4 mm / 4.41 in
Depth: 61.2 mm / 2.46 in
Color temperature: 6,500 K
Voltage: 12V DC
Theoretical power: 54W
Theoretical cavity: 1,900 lm
Actual power: 19W
Actual lumen: 826 lm
Reference Price (FOB)
1. Single product price, USD66.99
2.12set, USD40.20
3.24set, USD36.20
4.48set, USD32.60
5.96set, USD29.30
Support single product "one generation" order business
More wholesale procurement preferential policies, welcome the letter to consult the business
SPU PSMS-HDF0917
Trade name: FOR Honda golden wing motorcycle fog lamp. (FOR Honda GL1800 Gold Wing 2012-2017 Led Fog Light Kit Gold Wing Parts GL1800 Gold Wing Fog Light)
Height: 134 mm / 5.78 in
Width: 122.7 mm / 4.83 in
Depth: 105.4 mm / 4.15 in
Color temperature: 6,500 K
Voltage: DC 12V
Theoretical power: 54W
Theoretical cavity: 2,100 lm
Actual power: 21W
Actual lumen: 992 lm
Reference Price (FOB)
1. Single product price, USD231.60
2.6set, USD139.00
3.12set, USD125.10
4. 24set, USD112.60
5.48set, USD101.30
SPU PSMS-VROD01D
Trade name: FOR Haleway Luther VROD motorcycle headlights. (FOR Harley projector Headlamp V-ROD VRSCA VRSCR VRSCW Led Oval Motorcycle Headlamp)
Cups option:Chorm/Black 7 inch
VROD
High Beam Lumen: 997LM+10PC OSRAM
Low beam Lumen: 670LM+6 PC OSRAM
IP : IP65
Ring Color:white and yellow
lens Material:PC
Housing Material :Aluminum
Reference Price (FOB)
1. Single product price, USD118.40
2.6set, USD71.00
3.12set, USD63.90
4.24set, USD57.50
5. 48set, USD51.80
Support single product "one generation" order business
More wholesale procurement preferential policies, welcome the letter to consult the business
SPU PSMS-VROD01-RL
Trade name: FOR Haleway Luther VROD motorcycle headlights. (FOR Harley projector Headlamp V-ROD VRSCA VRSCR VRSCW Led Oval Motorcycle Headlamp)
Cups option:Chorm/Black 7 inch
VROD
High Beam Lumen: 997LM+10PC OSRAM
Low beam Lumen: 670LM+6 PC OSRAM
IP : IP65
Ring Color:white and yellow
lens Material:PC
Housing Material :Aluminum
Reference Price (FOB)
1. Single product price, USD118.40
2. 6set, USD71.00
3. 12set, USD63.90
4.24set, USD57.50
5. 48set, USD51.80
Support single product one generation order business
More wholesale procurement preferential policies, welcome the letter to consult the business
SPU: PSMS-VROD01-RK
Trade name: FOR Haleway Luther motorcycle headlights. (FOR Harley projector Headlamp V-ROD VRSCA VRSCR VRSCW Led Oval Motorcycle Headlamp)
Cups option:Chorm/Black 7 inch
VROD High Beam Lumen: 997LM+10PC OSRAM
Low beam Lumen: 670LM+6 PC OSRAM
IP : IP65
Ring Color:white and yellow lens Material:PC
Housing Material :Aluminum
Reference Price (FOB)
1. Single product price, USD195.60
2.6set, USD117.40
3.12set, USD105.60
4 24set, USD95.10
5.48set, USD85.60
Support single product one generation order business
More wholesale procurement preferential policies, welcome the letter to consult the business
SPU PSMS-771
Trade name: FOR Harley-Davidson motorcycle headlights. (FOR Hummer, Harley Davidson Motorcycle Universal Circular Projector Headlights Wrangler JK 2007-2017 for Jeep headlights)
Product Name: 7 inch led headlights
Diameter: 174.5mm/ 6.87inch
Depth: 104mm/ 4.09inch
Color Temperature: 6500K
Voltage: 12V DC
Theoretical Power 84W@High Beam, 54W@Low Beam
Theoretical Lumen 4700lm@High Beam, 2500lm@Low Beam
Outer Lens Material: PC
Housing Material: Die-cast Aluminum
Operating temperatureï¼?-40~60â??
Reference Price (FOB)
1. Single product price, USD164.70
2. 6set, USD98.83
3. 12set, USD89.00
4. 24set, USD80.10
5.48set, USD72.10
Support one product one generation order business
More wholesale procurement preferential policies, welcome the letter to consult the business
SPU: PSMS-F800HA
Trade name: FOR BMW motorcycle LED headlights. (Emark Certified Led Driving Headlights for BMW Motorcycle Accessories Parts for F800GS F700GS F650GS Headlights)
Height: 283.3 mm / 11.15 in
Width: 128.8 mm / 5.07 in
Depth: 132.2 mm / 5.2 in
Color temperature: 6000K-6500K
Voltage: DC 12V
Power: 35W at high light and 25W low light
lumen: high beam 6000 liters, low beam 4000 liters
Reference Price (FOB)
1. Single product price, USD257.40
2.6set, USD154.40
3.12set, USD139.00
4.24set, USD125.10
5.48set, USD112.60
Support single product one generation order business
More wholesale procurement preferential policies; welcome the letter to consult the business
SP PSMS-1079D
Trade name: FOR motorcycle 7-inch universal headlight. (7-inch headlight motorcycle with white DRL yellow turn signal headlights)
7INCH 30WATT
HIGH BEAM:2 LED X15W 3240LM
LOW BEAM:1LEDX15W 1620LM
DRL:24LED 2835 5W
IP : IP65
lens Material:PC
Housing Material :Aluminum
Reference Price (FOB)
1. Single product price, USD77.20
2. 6set, USD46.30
3. 12set, USD41.70
4. 24set, USD37.50
5.48set, USD33.80
SPU PSM-KM1718Z
Trade name: FOR KTM Off-road motorcycle headlights. (Molson Sport LED headlights with white halo DRL for SX SXF 125 SMC-R 690, black, orange, white lampshade. LED Headlamp replacement)
Height: 150.8 mm / 5.94 in
Width: 228.3 mm / 8.99 in
Depth: 100mm / 3.94 in
Color temperature: 6000-6500K
Theoretical power: high beam 90W, low beam 30W
Theoretical lumen: high beam 5400 lm, low beam 2400 lm
Actual power: high light 54W, low light 24W
Actual lumen: high beam 2055 lm, low beam 1029 lm
Position lamp: 4.8W
Reference Price (FOB)
1. Single product price, USD128.70
2. 5set, USD77.20
3. 10set, USD69.50
4. 20set, USD62.50
5. 30set, USD56.30
Support one product one generation order business
More commodity specifications and preferential policies, welcome the letter to consult the business
SPU: PSMS-22KMHW1621
Trade name: FOR Huswana motorcycle headlight. (MorSun Emark Certified off-road YTH2248,701,2004-2014,2019 + headlights, using Qvarna FE250 FE350 FE450 FE501 halo headlights. LED Headlamp replacement)
LED Headlight Headlamp Light Fairing
For Husqvarna FC TC FE TE MX Dirt
Bike Enduro LED Headlight
Reference Price (FOB)
1. Single product price, USD108.10
2. 12set, USD64.90
3. 24set, USD58.40
4. 48set, USD52.50
5. 96set, USD47.30
Support one product one generation order business
More commodity specifications and preferential policies, welcome the letter to consult the business
SPU: PSMS-KM1718
Trade name: FOR KTM Off-road motorcycle headlights. (2017-2022 EXC XCW 2014-2019 Emark LED Headlights. SX SXF SMC R 690 Enduro Motormotorcycle headlight kit. White and yellow unilateral steering)
Height: 143 mm / 5.63 in
Width: 164 mm / 6.46 in
Depth: 119 mm / 4.69 in
Color temperature: 6,500 K
Theoretical power: high light 66W, low light 36W
Theoretical lumen: high beam 3000 lm, low beam 2000 lm
Actual power: high light 30W, low light 20W
Actual lumen: 1327 lm, 913 lm
Position light: 2W
Plug-in Type:7041A-2.8-11
Reference Price (FOB)
1. Single product price, USD113.20
2.12set, USD68.000
3.24set, USD61.20
4.48set, USD55.00
5.96set, USD49.50
Support one product one generation order business
More commodity specifications and preferential policies, welcome the letter to consult the business
SPU: PSMS-K1200HA
Trade name: FOR BMW motorcycle LED headlights. (FOR BMW K1300R, K1200R, F650GS, F800GS, F650ST, F800S, K1200RS, F800ST, K1200R, K1300R; Year: 1997-1999,2005,2008-2012,2005-2008,2008-2013,1996-2004,2011,2009,2010,2016,2015)
Height: 126.2 mm / 4.97 in
Width: 263.5 mm / 10.37 in
Depth: 143.5 mm / 5.64 in
Color temperature: 6,000 K
Voltage: DC 12V
Power: high light 66W, low light 30W
lumen: high beam 4000 liters, low beam 1800 liters
Reference Price (FOB)
1. Single product price, USD308.80
2.6set, USD185.30
3.12set, USD166.80
4.24set, USD150.10
5.48set, USD135.10
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU: PSMS-BWHDR1200
Trade name: FOR BMW motorcycle headlights. (LED Headlight for BMW R1200GS R 1200 GS ADV R1200GS LC 2004-2012 (fit Oil Cooler))
Voltage:10-30V DC
Waterproof: IP67
LED:15pcs*3w Epistar
Color selection: black, chrome
Case: aluminum alloy
Color temperature: 6,000 K
Beam type: high and low beam
Life span over: 50000 hours
Compatibility: LED headlights
Operating voltage: 12-30V straight
Actual power: 43W highlight, 29W low light
Actual lumen: 1629 lm high beam, 1029 lm low beam
External lens material: PC
Case Material: PC + ABS
Certification: Emack
Color temperature: 6,000 K
Reference Price (FOB)
1. Single product price, USD411.80
2.6set, USD247.10
3.12set, USD222.40
4.24set, USD200.10
5.48set, USD180.10
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU: PSMS-GX8D
Trade name: FOR Harley-Davidson motorcycle headlight. (Morson Projector Road Sliding Tip Light Assembly LED5.75 " Double Tip Light Chrome Black Double Light for Harley FLHR / I Road King 2008-2013 + )
Height: 205.4mm/ 8.08 inch
Width: 333.4mm/ 13.12 inch
Depth: 168.4mm/ 6.63 inch
Color Temperature:6500K
Voltage: DC 12V
Power (High Beam): 38W
Power (Low Beam): 21W
Lumen (High Beam): 1654LM
Lumen (Low Beam): 699LM
Reference Price (FOB)
1. Single product price; USD411.80
2.4set; USD247.10
3.8set; USD222.40
4.16set; USD200.10
5.32set; USD180.10
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU: PSMS-GX8
Trade name: FOR Harley-Davidson Motorcycle LED Headlights. (2015 + Harley Motorcycle Dual Headlights 2015-2020 Road Slight SAE Approved Headlight Replacement)
Height: 205.4mm/ 8.08 in
Width: 333.4 mm / 13.12 in
Depth: 168.4 mm / 6.63 in
Color temperature: 6,500 K
Voltage: DC 12V
Power (far-light): 38W
Power (low light beam): 21W
Lumen (high beam): 1,654 LM
Lumen (low beam): 698 LM
Reference Price (FOB)
1. Single product price, USD411.80
2.4set, USD247.10
3.8set, USD222.40
4.16set, USD200.10
5.32set, USD180.10
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPUï¼? PSV018
Trade name: car fault diagnosis instrument, obd diagnosis tool, car code reading card, Bluetooth car detector, factory direct selling (OBD connector).
technical parameter
Connection mode: Bluetooth 5.0
Main control chip: 25K80
Support system: Android / Windows / Ios
Operating voltage: 9V / 16V
Operating current: 26mA
Operating temperature: -40â?? + 85â??
Product size: 47 * 46 * 24mm
Packing size: 110 * 70 * 30mm
Product weight: 82g
Quantity quantity: 90 pcs
product description
1. Bluetooth 5.0, farther transmission distance, better stability and low power consumption
2. Diagnosis of automobile engine system
3. Engine fault lamp clearance
4. Automotive data flow
5. Regular OBD functions can be realized
6. Recommended APP, FOR Android: torque, OBD Home, FOR Apple: car scanner, OBD Auto Doctor, OBD Home
7. Small size, high chip integration, independent appearance patent, utility model patent and software copyright.
7. Through CE, FCC, RoHS certification.
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Vehicle Diagnostic Tool WiFi Elm327 Fault Repair Decoder ECU Card Reader Car Diagnostic Scanner Diesel vehicle diagnostic tool
Auto Repair OBD 2 scanner Vehicle fault analyzer Diesel car OBD scan tool ECU reader OBD key programmer
OBD Automotive Diagnostic Scanner OBD Adapter OBD II Diagnostic System OBD reader Motorcycle diagnostics scanner
SPUï¼? PSV017W-1
Trade name:OBD scan machine Bluetooth reading card engine scan machine elm327 (FOR Android: torque, OBD Home, FOR Apple: car scanner, OBD Auto Doctor, OBD Home)
technical parameter
Connection mode: WiFi
Master control chip: crystal element
Support system: Android / Windows / iOS
Operating voltage: 9V 16V
Operating current: 46mA
Operating temperature: -40â?? 85â??
Product size: 57.2*47*24.5mm
Package size: 100*63*25.5mm
Product weight: 38g
Quantity quantity: 100 pcs
product description
1. Diagnosis of the automobile engine system
2. Engine fault lamp clearance
3. Automotive data flow
4. Regular OBD functions can be realized
5. Recommended APP FOR Android: torque, OBD Home, FOR Apple: car scanner, OBD Auto Doctor, OBD Home
6. Small size, high chip integration degree, with independent appearance patent, utility model patent and software copyright passed
7, CE, FCC and RoHS certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Vehicle Diagnostic Tool WiFi Elm327 Fault Repair Decoder ECU Card Reader Car Diagnostic Scanner Diesel vehicle diagnostic tool
Auto Repair OBD 2 scanner Vehicle fault analyzer Diesel car OBD scan tool ECU reader OBD key programmer
OBD Automotive Diagnostic Scanner OBD Adapter OBD II Diagnostic System OBD reader Motorcycle diagnostics scanner
SPU PSV02H2D
Trade name: Intelligent master 25K80 chip, elm327 automotive diagnostic instrument, engine fault detector, obd 2 Bluetooth reading code card, automotive diagnostic tool factory direct sales
(FOR Android: torque, OBD Home)
technical parameter
Connection mode: Bluetooth 2.0
Main control chip: 25K80
Support system: Android / Windows
Operating voltage: 9V 16V
Operating current: 35mA
Operating temperature: -40 85
Product size: 45 * 25 * 65mm
Package size: 100*63*25.5mm
Product weight: 40g
Quantity: 100 pcs
product description
1. Diagnosis of the automobile engine system
2. Engine fault lamp clearance
3. Automotive data flow
4. Regular OBD functions can be realized
5. Recommend APP FOR Android torque and OBD Home
6. Small size, high chip integration degree, with independent appearance patent, utility model patent and software copyright passed
7, CE, FCC and RoHS certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Automotive diagnostic tool WiFi Elm327
OBD car scanner fault repair decoder
ECU card reader car diagnostic scanner
OBD car scanner, diesel vehicle diagnostic tool
Auto Repair OBD 2 scanner
Vehicle fault analyzer diesel vehicle OBD scanning tool
ECU reader OBD Key Programmer
OBD Car scanner OBD, adapter
OBD II Diagnostic system OBD reader
Motorcycle diagnostic scanner
PSB0176-2.
M100 PRO Moto Scanner Battery Tester Motorcycle Tester (OBD scan tool).
A new generation of upgraded intelligent motorcycle electronic fuel injection system diagnostic instrument based on M100, large 3.5 color screen, new appearance and more atmospheric; model/function icons are more intuitive; motorcycle models cover more comprehensive, more comprehensive and powerful functions; adopt a new generation of processing chips , The data reading speed is faster, and the detection speed is more efficient and fast;
Dual system detection:EFI system detection + battery detection;
M100 Pro Moto Scanner is the new generation Handheld Motorcyle diagnostics tool, it covers virtually all major manufacturers' diagnostic functions. It helps the technician to diagnose problems and make repairs faster;many common procedures are written into the tool so the technician can follow them (injectors, ignition, coils, fuel pump, etc.).
It allows the technician to perform factory service procedures such as re-setting the service light, unlocking the immobilizer and configuring the immobilizer/alarm, making injection adjustments (COTrimmer), adjusting the throttle valve position sensor(TPS),re-setting auto adaptive parameters, and making idling adjustments.
The tool shows live data, displays ECUdata, reads stored faults (history) or live data (RPM,batteryvoltage,throttleangle).
Features:
1, Handheld operation, convenient and flexible to use
2, Support for SD cards to store data and upgrades,
3, Reserved CAN bus interface
4, 3.5-inch color screen, clear display.
5 Dynamic data with numerical and waveform.
Function:
1. Read system information
2. Read data stream
3. Read fault code
4. Erase fault code
5. Freeze data
6. CO idle speed adjustment
7. ABS system test
Support Motorcycle list:
Hartford, Aeon, Honda, SYM, Yamaha,Suzuki,Kymco,Kawasaki,Piaggio,PGO,KTM, etc
Support Multi Languages:
English, Chinese, Thai, Indonesian, Vietnamese, Spanish, Turkish, French, Cambodian,Japanese, Korean.
Specifications:
Power: DC10-15V
Operating Current: 250mA
Storage temperature: -10 C to 85 C
Operating temperature: 0 C to 70 C
Humidity: <90%
Upgrade Ports: USB port
Communication ports: COM port.
Step Price (FOB):
1. Sample unit price USD538.46,
2. 1000set, USD323.08,
3. 2000set, USD290.77,
4. 3000set, USD261.69,
5. 4000set, USD235.52.
Remarks: Free shipping for sample unit price.
PSB0176-1.
M100 Pro Moto Scanner ecu motorcycle Tester (OBD scan tool).
A new generation of upgraded intelligent motorcycle electronic fuel injection system diagnostic instrument based on M100, large 3.5 color screen, new appearance and more atmospheric; model/function icons are more intuitive; motorcycle models cover more comprehensive, more comprehensive and powerful functions; adopt a new generation of processing chips , The data reading speed is faster, and the detection speed is more efficient and fast;
Dual system detection:EFI system detection + battery detection;
M100 Pro Moto Scanner is the new generation Handheld Motorcyle diagnostics tool, it covers virtually all major manufacturers' diagnostic functions. It helps the technician to diagnose problems and make repairs faster;many common procedures are written into the tool so the technician can follow them (injectors, ignition, coils, fuel pump, etc.).
It allows the technician to perform factory service procedures such as re-setting the service light, unlocking the immobilizer and configuring the immobilizer/alarm, making injection adjustments (COTrimmer), adjusting the throttle valve position sensor(TPS),re-setting auto adaptive parameters, and making idling adjustments.
The tool shows live data, displays ECUdata, reads stored faults(history) or live data (RPM,batteryvoltage,throttleangle).
Features:
1, Handheld operation, convenient and flexible to use
2, Support for SD cards to store data and upgrades,
3, Reserved CAN bus interface
4, 3.5-inch color screen, clear display.
5 Dynamic data with numerical and waveform.
Function:
1. Read system information
2. Read data stream
3. Read fault code
4. Erase fault code
5. Freeze data
6. CO idle speed adjustment
7. ABS system test
Support Motorcycle list: Hartford, Aeon, Honda, SYM, Yamaha,Suzuki,Kymco,Kawasaki,Piaggio,PGO,KTM, etc
Support Multi Languages:English, Chinese, Thai, Indonesian, Vietnamese, Spanish, Turkish, French, Cambodian,Japanese, Korean.
Specifications:
Power: DC10-15V
Operating Current: 250mA
Storage temperature: -10 C to 85 C
Operating temperature: 0 C to 70 C
Humidity: <90%
Upgrade Ports: USB port
Communication ports: COM port.
Step Price (FOB):
1. Sample unit price USD323.08,
2. 1000set, USD193.85,
3. 2000set, USD174.47,
4. 3000set, USD157.02,
5. 4000set, USD141.32.
Remarks: Free shipping for sample unit price.
SPU PSV06H4K
Trade name: Intelligent master 25K80 chip, elm327 Vehicle fault detector, engine diagnostic fault code clear reading card, diagnostic tool obd 2. (FOR Android: torque, OBD Home FOR Apple: car scanner, OBD Auto Doctor, OBD Home)
technical parameter
Connection mode: Bluetooth 4.0
Main control chip: 25K80
Support system: Android / Windows / iOS
Operating voltage: 9V 16V
Operating current: 35mA
Operating temperature: -40â?? 85â??
Product size: 43 * 25 * 23mm
Package size: 100*63*25.5mm
Product weight: 29.5g
Quantity quantity: 100 pcs
product description
1. Diagnosis of the automobile engine system
2. Engine fault lamp clearance
3. Automotive data flow
4. Regular OBD functions can be realized
5. Recommended APP FOR Android: torque, OBD Home FOR Apple: car scanner, OBD Auto Doctor, OBD Home
6. Small size, high chip integration degree, with independent appearance patent, utility model patent and software copyright passed
7, CE, FCC and RoHS certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Automotive diagnostic tool WiFi Elm327
OBD car scanner fault repair decoder
ECU card reader car diagnostic scanner
OBD car scanner, diesel vehicle diagnostic tool
Auto Repair OBD 2 scanner
Vehicle fault analyzer diesel vehicle OBD scanning tool
ECU reader OBD Key Programmer
OBD Car scanner OBD, adapter
OBD II Diagnostic system OBD reader
Motorcycle diagnostic scanner
PSA0002-1.ELM327 HH V1.5 OBD2 Bluetooth Car Diagnostic Instrument.
Part of the advantages:
1. Software version: V2.1 (according to the software);
2. Hardware version: V1.5;
3. For all vehicles meeting the OBD-II standards;
4. Wireless (Bluetooth).
Supported protocols:
1.SAE J1850 PWM (41.6Kbaud)
2.SAE J1850 VPW (10.4Kbaud)
3.ISO9141-2 (5 baud init, 10.4 Kbaud)
4.ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5.ISO14230-4 KWP (fast init, 10.4 Kbaud)
6.ISO15765-4 CAN (11bit ID, 500 Kbaud)
7.ISO15765-4 CAN (29bit ID, 500 Kbaud)
8.ISO15765-4 CAN (11bit ID, 250 Kbaud)
9.ISO15765-4 CAN (29bit ID, 250 Kbaud)
OBD2 Bluetooth Scanner Functions:
1: Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
2: Clear trouble codes and turn off the MIL ("Check Engine" light)
3: Display current sensor data, including:
4: Engine RPM
5: Calculated Load Value
6: Coolant Temperature
7: Fuel System Status
8: Vehicle Speed
9: Short Term Fuel Trim
10: Long Term Fuel Trim
11: Intake Manifold Pressure
12: Timing Advance
13: Intake Air Temperature
14: Air Flow Rate
15: Absolute Throttle Position
16: Oxygen sensor voltages / associated short term fuel trims
17: Fuel System status
18: Fuel Pressure
19: Many others
OBD2 Bluetooth Scanner Specifications:
Communication: Bluetooth 2.0
Master Chip: PICI8F25K80
Support System: Android and Windows
Working Voltage: 9v ~ 16v
Working Current: 35mA
Standby Current: 25mA
Operating temperature: -40 ~ 85
Working Humidity: less than 60%
Size: 45mm * 25mm * 65mm
Compatible systems:
Software support platform: Windows XP, Windows 7/8, Android, Symbian .
Compatible software:
Window : ScanMaster-ELM, ScanTool.net, PCMSCAN ELM, etc.
Android : Torque, DashCommand, OBD Car Doctor, Auto Doctor, Mini OBD, EOBD, etc.
Step Price (FOB):
1. Sample unit price USD18.25,
2. 1000set, USD10.95,
3. 2000set, USD9.86,
4. 3000set, USD8.87,
5. 4000set, USD7.98.
Remarks: Free shipping for sample unit price.
SPU: PSV300
Trade name: Fault code quick clearing, I / M status detection, engine fault data flow code card, elm327 fault detector, obd 2 diagnostic code card, vehicle information reading card. Factory direct selling (OBD connector)
technical parameter
Master control chip: crystal element
Operating voltage: 12V
Operating current: 64 mA
Operating temperature: -30~70â??
Product size: 123 * 65 * 22mm
Packaging size: 245 * 160 * 33mm
Product weight: 135g
With packaging: 243g
Quantity quantity: 50 pcs
product description
1. Read the car fault code
2. Clear the fault code
3.I/M
4. Rack number
5. Support for 1 language: English
6. Communication mode, OBD interface
7.CE / FCC / ROHS / UKCA certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Automotive diagnostic tool WiFi Elm327
OBD car scanner fault repair decoder
ECU card reader car diagnostic scanner
OBD car scanner, diesel vehicle diagnostic tool
Auto Repair OBD 2 scanner
Vehicle fault analyzer diesel vehicle OBD scanning tool
ECU reader OBD Key Programmer
OBD Car scanner OBD, adapter
OBD II Diagnostic system OBD reader
Motorcycle diagnostic scanner
SPUï¼? PSVC100
Trade name: car fault diagnosis instrument, obd diagnosis tool, car code reading card, Bluetooth car detector, factory direct selling (OBD connector).
technical parameter
Connection mode: Communication mode: Bluetooth dual mode (2.0 / 4.0)
Main control chip: 25K80
Support system: Android / Windows / Ios
Operating voltage: 9V / 16V
Operating current: 45mA
Operating temperature: -40â?? + 85â??
Working humidity: 60%
Product size: 45 * 40 * 18mm
Packing size: 110 * 70 * 30mm
Product weight: 82g
Quantity quantity: 90 pcs
product description
software function:
1. Read the generic and manufacturer-specific diagnostic trouble codes and show their meaning (more than 3000 generic code definitions in the database).
2. Clear the fault code and turn off the MIL ("Check engine" indicator)
3. Display the current sensor data, including:
4. Engine rotation speed
5. Calculate the load value
6. Coolant temperature
7. Fuel system status
8. Vehicle speed
9. Short-term fuel decoration
10. Long-term fuel decoration
11. Intake-air manifold pressure
12. Time time
13. Intake air temperature
14. Air flow rate
15. Absolute throttle position
16. Oxygen sensor voltage / associated short-term fuel trim
17. Fuel oil system status
18. Fuel oil pressure
19. Recommended APP, FOR Android: torque, OBD Home, FOR Apple: car scanner, OBD Auto Doctor, OBD Home
20. Small size, high chip integration, independent appearance patent, utility model patent and software copyright.
21. Certified by CE, FCC, and RoHS.
Support agreement
SAE J1850 PWM
SAE J1850 VPW
ISO 9141-2
ISO14230-4 KWP (5 baud init)
ISO14230-4 KWP (fast init)
ISO15765-4 CAN (11bit, 500 Kbaud)
ISO15765-4 CAN (29bit, 500 Kbaud)
ISO15765-4 CAN (11bit, 250 Kbaud)
ISO15765-4 CAN (29bit, 250 Kbaud)
SAE J1939 CAN (29 bit, 250 Kbaud)
Automotive diagnostic tool WiFi Elm327
OBD car scanner fault repair decoder
ECU card reader car diagnostic scanner
OBD car scanner, diesel vehicle diagnostic tool
Auto Repair OBD 2 scanner Vehicle fault analyzer Diesel car OBD scan tool ECU reader OBD key programmer
OBD Car Scanner OBD Adapter OBD II diagnostic System OBD reader Motorcycle diagnostic scanner
SPUï¼? PSB0117
Trade name: Vlinker BM + OBD2 V2.2 Bluetooth 4.0 vehicle diagnosis instrument, Bluetooth Bluetooth 5.0, elm327 V2.2 vehicle fault detector, automobile fault diagnosis instrument, obd diagnosis tool, factory direct sales (applicable to BimmerCode).
technical parameter
Communication mode: Bluetooth 24.0
Main control chip: PIC18 F25K80
Support system: Android / Windows / Ios
Operating voltage: 9V / 16V
Operating current: 40mA
Operating temperature: -40â?? + 80â??
Working humidity: 60%
Product size: 56 * 45.8 * 24mm
Packing size: 110 * 70 * 30mm
Product weight: 82g
Quantity quantity: 90 pcs
product function:
1. Nine protocols supporting the OBD II / EOBD standard
2. Wide power range: 9~36V power supply, reliable over current and over voltage protection
3. Adopt the standby low-power mode to ensure the safe use of car batteries
4. Bluetooth dual-mode 4.0, support for Android system and Apple system
5. Use digital tube to display voltage and current to improve customer experience
6. Compatible software platform
Window version: Scan Master, ScanTool.net, PCMSCAN, etc
Android version: Torque, dashboard commands, OBD Auto Doctor, Auto doctor, Mini OBD II, EOBD, etc
Version of iOS: automatic doctor, OBD car doctor, dashboard commands, EOBD, etc
Symbian version: OBDScope
Software support platform: Windows XP, Windows 7 / 8, Android, iOS, Symbian island and other systems
product description
1: Read the common and manufacturer-specific diagnostic trouble codes and show their meaning (over 3000 common code definitions in the database).
2: Clear the fault code and turn the MIL (check engine lamp)
3: Display the current sensor data, including:
4: Engine speed
5: Calculate the load value
6: Coolant temperature
8: Vehicle speed
11: Intake manifold pressure
12: Time is ahead of time
13: Intake air temperature
14: Air flow rate
15: Absolute throttle position
16: Oxygen sensor voltage / associated short-term fuel trim
Recommended APP, FOR Android: torque, OBD Home, FOR Apple: car scanner, OBD Auto Doctor, OBD Home
Small size, high chip integration, with independent appearance patent, utility model patent and software copyright.
Support agreement
SAE J1850 PWM
SAE J1850 VPW
ISO 9141-2
ISO14230-4 KWP (5 baud init)
ISO14230-4 KWP (fast init)
ISO15765-4 CAN (11bit, 500 Kbaud)
ISO15765-4 CAN (29bit, 500 Kbaud)
ISO15765-4 CAN (11bit, 250 Kbaud)
Vehicle diagnostic tool WiFi Elm327 fault repair decoder
ECU card reader car diagnostic scanner
A diagnostic tool for diesel vehicles
Auto Repair OBD 2 scanner Vehicle fault analyzer Diesel car OBD scan tool ECU reader OBD key programmer
OBD Automotive Diagnostic Scanner OBD Adapter OBD II Diagnostic System OBD reader Motorcycle diagnostics scanner
PSJUSB-MINI MINI OBD2 ELM327 USB V1.1 Automotive Diagnostic Instrument (WINDOWS).
MINI OBDII USB V1.1 Scanner for Multi-brands CAN-BUS as same as ELM327 USB. Supports All OBD2 Protocol works on Windows, used to read diagnostic trouble codes, both generic and manufacturer-specific, and display your meaning (over 3000 generic code definitions in the database).
Supported protocols:
1.SAE J1850 PWM (41.6Kbaud)
2.SAE J1850 VPW (10.4Kbaud)
3.ISO9141-2 (5 baud init, 10.4 Kbaud)
4.ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5.ISO14230-4 KWP (fast init, 10.4 Kbaud)
6.ISO15765-4 CAN (11bit ID, 500 Kbaud)
7.ISO15765-4 CAN (29bit ID, 500 Kbaud)
8.ISO15765-4 CAN (11bit ID, 250 Kbaud)
9.ISO15765-4 CAN (29bit ID, 250 Kbaud)
MINI OBDII USB Scanner Functions:
1: Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
2: Clear trouble codes and turn off the MIL ("Check Engine" light)
3: Display current sensor data, including:
4: Engine RPM
5: Calculated Load Value
6: Coolant Temperature
7: Fuel System Status
8: Vehicle Speed
9: Short Term Fuel Trim
10: Long Term Fuel Trim
11: Intake Manifold Pressure
12: Timing Advance
13: Intake Air Temperature
14: Air Flow Rate
15: Absolute Throttle Position
16: Oxygen sensor voltages / associated short term fuel trims
17: Fuel System status
18: Fuel Pressure
19: Many others
MINI OBDII USB Scanner Specifications:
Communication: USB Interface
Master Chip: PICI8F25K80
Driver IC: FT232
Support System: Windows
Working Voltage: 9v ~ 16v
Working Current: 15mA
Standby Current: 0mA
Operating temperature: -40 ~ 85
Working Humidity: less than 60%
Size: 45mm * 25mm * 75mm Cable Length 1.5M
Compatible systems:
Software support platform: Windows XP, Windows 7/8/10, MAC OS
Compatible software:
Window: ScanMaster-ELM, ScanTool.net, PCMSCAN ELM, etc.
MAC OS: OBD Auto Doctor(MAC Ver.)
Step Price (FOB):
1. Sample unit price USD38.46,
2. 1000set, USD23.08,
3. 2000set, USD20.77,
4. 3000set, USD18.69,
5. 4000set, USD16.82.
Remarks: Free shipping for sample unit price.
SPU: PSV310
Trade name: Fault code clearance, elm327 decoder, engine fault data flow code card, elm327 fault detector, obd 2 diagnostic code card, vehicle information reading. Factory direct selling (OBD connector)
technical parameter
Master control chip: crystal element
Operating voltage: 9-16V
Operating current: 80mA
Operating temperature: -30 ~70
Product size: 155 * 85 * 25mm
Packaging size: 200 * 130 * 43mm
Product weight: 200g
Color box packaging: 318g
Plastic suction packaging: 368g
Quantity quantity: 40 pcs
product description
1. Read the errors and clear the diagnostic codes
2. Quickly determine the reason for checking the engine lamp
3. View the frozen frame information
4. Display the I / M preparation status
5. Retrieve the vehicle information
6. Data flow
7. Real-time curve
8. Supports 6 languages: English, German, Spanish, Italian, French, and Dutch
9. Screen size is 2.8
10. Communication mode, OBD interface
10.CE/FCC/ROHS/UKCA Certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Automotive diagnostic tool WiFi Elm327
OBD car scanner fault repair decoder
ECU card reader car diagnostic scanner
OBD car scanner, diesel vehicle diagnostic tool
Auto Repair OBD 2 scanner
Vehicle fault analyzer diesel vehicle OBD scanning tool
ECU reader OBD Key Programmer
OBD Car scanner OBD, adapter
OBD II Diagnostic system OBD reader
Motorcycle diagnostic scanner
SPU PSB0005-1
Trade name: OBD 2 Bluetooth 3.0 vehicle diagnostic instrument, Bluetooth Bluetooth 5.0, elm327 V2.2 auto fault detector, automobile fault diagnosis instrument, obd diagnostic tool, factory direct sales.
technical parameter
Communication mode: Bluetooth version: 3.0
Software version: V2.1
Hardware version: V2.1
Main control chip: PIC18 F25K80
Support system: Android / Windows / Ios
Operating voltage: 9V / 16V
Operating current: 40mA
Operating temperature: -40 + 80
Working humidity: 60%
product size:mm
packing measurement:mm
Product weight: g
Number of boxes: pcs
product function:
1. Small in size and compact in structure. Plug, do not unplug the plug
2. Stable connection
3. When stopping communication, wait for half an hour and sleep automatically
4. Support for all the OBD II protocols
5. The adapter uses the fastest and most reliable ARM chip
6. Bluetooth at 5 10 meters
7. iCar (Bluetooth version) supports Palm, PDA, mobile (Androis, java, black happy, etc.) software applications
Support agreement
1.SAE J1850 PWM (41.6Kbaud)
2.SAE J1850 VPW (10.4Kbaud)
3.ISO9141-2 (5 baud init, 10.4Kbaud)
4.ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5.ISO14230-4 KWP (fast init, 10.4 Kbaud)
6.ISO15765-4 CAN (11bit ID, 500 Kbaud)
7.ISO15765-4 CAN (29bit ID, 500 Kbaud)
8.ISO15765-4 CAN (11bit ID, 250 Kbaud)
9.ISO15765-4 CAN (29bit ID, 250 Kbaud)
A.SAE J1939 CAN (29bit ID, 250 * Kbaud)
B.USER1 CAN (11 * bit ID, 125 * Kbaud)
C.USER2 CAN (11 * bit ID, 50 * kbaud)
Automotive diagnostic tool WiFi Elm327
OBD car scanner fault repair decoder
ECU card reader car diagnostic scanner
OBD car scanner, diesel vehicle diagnostic tool
Auto Repair OBD 2 scanner Vehicle fault analyzer Diesel car OBD scan tool ECU reader OBD key programmer
OBD Car Scanner OBD Adapter OBD II diagnostic System OBD reader Motorcycle diagnostic scanner
PSA0247-1.K+CAN Commander1.4 Automotive Diagnostic Testing Line (Audi-Volkswagen).
K+CAN Commander Software version 1.4 Diagnostic Cable diagnose via CAN and Special function via K-Line; works for VW, for SEAT and for SKODA (CAN) , Models cover up to September 2006;
Works for AUDI, Models cover up to 2007.
Function:
1.Odometer correction in instrument clusters and EDC15x.
2.Read Security Access Code/Login WFS.
3.Read/program immobilizer data.
4.Read/write EEPROM from instrument cluster/immobilizer. All supported clusters CAN/K.
5.VAG MMI TV Activation.
6.Read/Write EEPROM of Engine Control Units VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic ME7.8, for Porsche.
7.Key learning buttons for easy usage (not needed security code). Can do component security authorization.
8.Key learning for Porsche CAYENNE (not needed security code) K+CAN.
9.Custom memory reading from different units like ECUs, EZS-Kessy and xxxxx.
10.Reading flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with next update will be possible programming of flash memories
11.Crash data clear in airbag units
Features:
1. Diagnostic via CAN and Special Function via K-Line.
2. Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0.
3. Manual definition of running diagnostic session C not like remaining diagnostic tools always standard diagnostic session 0x89. Function is under CAN-TP2.0.
4. Broadcast diagnostic request disable normal communication, clear DTCs, Logistic (transport) mode. Functions are under CAN-TP2.0.
5. Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Functions are under CAN-TP2.0.
6. Most of popular diagnostic requests identifications, coding, adaptations, DTCs. Functions are under CAN-TP2.0.
Step Price (FOB):
1. Sample unit price USD23.08,
2. 1000set, USD13.85,
3. 2000set, USD12.47,
4. 3000set, USD11.22,
5. 4000set, USD10.10.
Remarks: Free shipping for sample unit price.
PSA0118-2. MINI VCI OBD2 Automotive Diagnostic Testing Line (TOYOTA TIS J2534 V17.10.
012).
USB to OBD2 16pin MINI VCI Single diagnostic Cable for TOYOTA TIS Techstream
Description:
Single cable for MINI VCI FOR TOYOTA is cost-effective,
1.the price of product is only one-third of similar foreign products.
2.Support for Toyota TIS OEM diagnostic software
3.Support all the diagnostic communication protocols needed for Toyota (since 1996).
Software Version: V17.10.012
Firmware Version: 1.4.1
Recommendation Operating System: Win7/Win10 32bit
Software Version: V17.10.012
Firmware Version: 1.4.1
Recommendation Operating System: Win7/Win10 32bit
Top 3 Reason To Get MINI VCI Single Cable
1. Support TIS OEM diagnostic software
2. Support all the diagnostic communication protocols needed for Toyota (since 1996).
3. Supported Protocols:
K-Line ISO 9141 / KWP 2000 ISO 14230-4 / SAE J1850 PWM / SAE J1850 VPW / CAN 2.0B ISO 11898 / CAN ISO 15765-4
Notice
1.This package do not contain 22pin connector for Toyota, so it can only work for Toyota 16pin cars.
2.Support Computer System: Windows XP; Windows7 32 bit
FAQ:
Q: is it compatible with apple laptop?
A:. No. It supports windows7 32 bit and windows10 32 bit if met problems of asking password, just try more times to install driver.
Q: I use adapter to connect cars, but it fails, what is wrong My car is 1994 Toyota Camry?A: be sure to install the driver well.
Q: I have installed the driver, but still can not use
A: This item is good for after 1996.
Q: my cars are Land Cruiser FZJ 80 (450 Lexus) and prado (5vzfe engine), the software is good But when I use it to check, the K-Line, L-Line, CAN BUS shows red And it only.. recognizes two cars' ECU.
A: it is not compatible with the cars.
Q: Is MINI VCI FOR TOYOTA TIS Techstream compatible with apple computer?
A: TIS Techstream works on windows xp and windows7, For apple computer, it should not be compatible, but some systems will prompt it will need password, please install driver software several times, it will be ok.
Or, you can use the TIS KEY. It is in our CD
Q: MINI VCI FOR TOYOTA (SP61) can not work on my 1994 Toyota Camry, I did everything as the manual.
A: The item can work well with year after 1996, it is better to try cars after 1996 to check whether the item is in good condition.
PSA0114-3. 2014V V1.99 diagnostic tool Automotive Diagnostic Instrument (Opel).
2014 V diagnostic tool for Opel cars covers almost all Models for Opel cars, even new cars with CAN-BUS based diagnostic. Such as diagnostic function for Vectra-C, for Astra-H, for Zafira-B etc. It lets you read and clear fault codes, support many control units. Opcom OP-Com 2014 V Can OBD2 for Opel Firmware V1.99 with PIC18F458 Chip.
Attention for Latest Opcom Software VAUX-COM_120309a.exe:
1. If you run it on XP or Win7, please make sure you install dotnetfx35_SP1 system patch, or Opcom software can't perform well
2. When you install on Win7 and open software, please choose Run as administrator, and read the installation video on CD carefully
Function:
1. It covers almost all Models for Opel cars, even new cars with CAN-BUS based diagnostic, such as for Vectra-C, for Astra-H, for Zafira-B etc.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since many pins used in the OBD connector for Opel, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information:
Full Fault Code Text Description:
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You can also run output tests on many controllers:
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
FAQ:
A:1. You will get a feedback on the state of the activated output. This will helps you to find the failed. Components more easily. With OP-COM, you can learn keys to immobiliser, and remote keys to the central door locking.
2. You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.
3. You will need the vehicle security code, which can be found on the CAR-PASS.
SPU: PSV316
Trade name: Handheld fault diagnosis + Bluetooth APP dual operation experience, handheld and Bluetooth 2-in-one diagnostic instrument, I / M status detection, elm327 fault detection instrument, obd 2 diagnostic code reading card. Factory direct selling (OBD connector)
technical parameter
Main control chip: MM32L073PF
Operating voltage: 12V
Operating current: 57 mA
Operating environment: -25 70
Storage temperature: -25 70
Overall dimensions: 120*57*15.5mm
Packaging size: 160 * 120 * 54mm
Product weight: 139g
With packaging: 259G
Quantity quantity: 40 pcs
product description
1. Handheld fault diagnosis + Bluetooth APP dual operation experience, handheld and Bluetooth two in one
2. Automobile fault diagnosis
3. Engine fault lamp clearance
4. Data flow
5. Real-time curve
6. Print function
7. Color screen 320 * 426 display
8. Supports 6 languages: German, English, Spanish, French, Italian, and Dutch
9. Communication mode, OBD interface
10.CE/FCC/ROHS/UKCA Certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Reference Price (FOB)
1. Single piece Price, USD76.50
2. 50set, USD45.90
3. 100set, USD41.30
4. 150set, USD37.16
5. 200set, USD33.44
6. 250set, USD30.10
7. 300set, USD27.10
8. 500set, USD24.40
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU: PSV312
Trade name: Fault code quick clearing, elm327 decoder, engine fault data flow code card, elm327 fault detector, obd 2 diagnostic code card, vehicle information reading card. Factory direct selling (OBD connector)
technical parameter
Master control chip: crystal element
Operating voltage: 9-36V
Operating current: 58mA
Operating temperature: -20 65
Product size: 152 * 87.5 * 22mm
Packaging size: 200 * 130 * 43mm
Product weight: 198g
With packaging: 315g
Quantity: 40 pcs
product description
1. Read the errors and clear the diagnostic codes
2. Quickly determine the reason for checking the engine lamp
3. View the frozen frame information
4. Display the I / M preparation status
5. Retrieve the vehicle information
6. Data flow
7. Real-time curve
8. Support for 6 languages: English, German, Spanish, French, Italian, and Dutch
9. Color screen display 2.8
10. Communication mode, OBD interface
11.CE/FCC/ROHS/UKCA Certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Reference Price (FOB)
1. Single product price, USD73.50
2. 50set, USD44.10
3. 100set, USD39.70
4. 150set, USD35.70
5. 200set, USD32.20
6. 250set, USD29.00
7. 300set, USD26.10
8. 500set, USD23.50
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU: PSV319
Trade name: Fault code quick clearing, elm327 decoder, engine fault data flow code card, elm327 fault detector, obd 2 diagnostic code card, vehicle information reading card. Factory direct selling (OBD connector)
technical parameter
Master control chip: crystal element
Operating voltage: 9-16V
Operating current: 80mA
Operating temperature: -20 65
Product size: 167 * 85 * 28mm
Packaging size: 200 * 130 * 43mm
Product weight: 200g
With packaging: 323g
Quantity: 40 pcs
product description
1. Read the errors and clear the diagnostic codes
2. Quickly determine the reason for checking the engine lamp
3. View the frozen frame information
4. Display the I / M preparation status
5. Retrieve the vehicle information
6. Data flow
7. Real-time curve
8. Support for 6 languages: English, German, Spanish, French, Italian, and Dutch
9. Color screen display 2.8
10. Communication mode, OBD interface
11.CE/FCC/ROHS/UKCA Certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Reference Price (FOB)
1. Single product price, USD45.90
2. 50set, USD27.50
3. 100set, USD24.80
4. 150set, USD22.30
5. 200set, USD20.10
6. 250set, USD18.10
7. 300set, USD16.30
8. 500set, USD14.70
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU: PSV322
Trade name: Fault code quick clearing, elm327 decoder, engine fault data flow code card, elm327 fault detector, obd 2 diagnostic code card, vehicle information reading card. Factory direct selling (OBD connector)
technical parameter
Master control chip: crystal element
Operating voltage: 9-16V
Operating current: 75mA
Operating temperature: -20 65
Product size: 153.2*88.6*23.3mm
Packaging size: 200 * 130 * 43mm
Product weight: 208g
With packaging: 301g
Quantity quantity: 40 pcs
product description
1. Read the errors and clear the diagnostic codes
2. Quickly determine the reason for checking the engine lamp
3. Oxygen sensor test
4. The EVAP test at No
5. Frozen the frame data
6.I / M data
7. View the vehicle information
8. Automotive data flow
9. Real-time curve
8. Support for 6 languages: English, German, Spanish, French, Italian, Dutch, Russian, and Chinese
9. Color screen display 2.8
10. Communication mode, OBD interface
11.CE/FCC/ROHS/UKCA Certification
Support agreement
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Reference Price (FOB)
1. Single product price, USD50.00
2. 50set, USD30.00
3. 100set, USD27.00
4. 150set, USD24.30
5. 200set, USD21.90
6. 250set, USD19.70
7. 300set, USD17.10
8. 500set, USD16.00
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU: PSV501
Trade name: Diesel vehicle fault detector, battery voltage detection, obd 2 vehicle fault diagnosis instrument, I / M status detection, engine diagnosis code card, vehicle diagnosis tool, vehicle information reading code card, diesel automobile integrated diagnostic instrument factory direct selling (OBD connector)
technical parameter
Master control chip: STM32F103VCT6 / APM32F103VCT6
Operating voltage: 9~36V
Operating current: 70-90 mA
Operating environment: -20 65
Storage temperature: -30 80
Overall dimension: 138.9 * 85 * 22mm
Packaging size: 175 * 258 * 62mm
Product weight: 500g
With packaging: 702g
Quantity : 15 pcs
product description
1. Support for truck SAE J1939 / SAE J1708 common protocols.
2. Support truck models to read vehicle information, read, clear fault code information, and read data flow information.
3. Support fault code information query, built-in about 9,000 fault code database information.
4. Support data flow playback function, view / delete fault code, data flow, and freeze frame information.
5. Support USB printing function, which can print fault code, data flow and freeze frame information.
6. Seven languages are supported: English, German, Spanish, French, Italian, Russian, and Chinese
7. Color screen display 2.8
8. Communication mode, OBD interface
9.CE / FCC / ROHS / UKCA certification
Support agreement
1. SAE J1939
2. SAE J1708/ J1587
Reference Price (FOB)
1. Single product price, USD200.00
2. 50set, USD120.00
3. 100set, USD108.00
4. 150set, USD97.20
5. 200set, USD87.50
6. 250set, USD78.73
7. 300set, USD71.00
8. 500set, USD63.90
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
SPU PSVP101
Trade name: Bluetooth Bluetooth 5.0, elm327 V2.2 auto fault detector, auto fault detector, obd diagnostic tool, car Bluetooth reading code card, factory direct sales (PSVP101 is a CAN OBDII / EOBD code reader, it also has a 2.8-inch TFT color screen and function I / M ready to test, it can provide accurate information and accurate judgment).
technical parameter
Main control chip: STM32F103VET6
Software platform: Support window
Operating voltage: DC 8 ~ 36V
Operating current: 50 mA
Standby current: 5 mA
Operating environment: -20 ~ 65
Storage temperature: -30 ~ 80
Product size: 154.5 * 85 * 24mm
packing measurement:mm
Product weight: g
packing quantity:pcs
product description
1. Read the error diagnostic code
2. Clear fault code (clear error code and close MIL)
3. Engine speed per minute (RPM)
4. Calculated load value
5. Coolant temperature
6. Fuel oil system status
7. Speed
8. Short-term fuel status
9. Long-term fuel conditions
10. Intake-air manifold pressure
11. Fuel injection advance time
12. Intake air temperature
13. Air flow velocity
14. Absolute position of the throttle
15. Oxygen detection voltage associated with the short-term fuel status
16. Fuel oil system status
17. Fuel oil pressure
18. Fuel consumption monitoring, etc.
19. Recommended APP, FOR Android: torque, OBD Home, FOR Apple: car scanner, OBD Auto Doctor, OBD Home
20. Small size, high chip integration, independent appearance patent, utility model patent and software copyright.
21. Certified by CE, FCC, and RoHS.
Support agreement
S1.SAE J1850 PWM (41.6Kbaud)
2.SAE J1850 VPW (10.4Kbaud)
3.ISO9141-2 (5 baud init, 10.4Kbaud)
4.ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5.ISO14230-4 KWP (fast init, 10.4 Kbaud)
6.ISO15765-4 CAN (11bit ID, 500 Kbaud)
7.ISO15765-4 CAN (29bit ID, 500 Kbaud)
8.ISO15765-4 CAN (11bit ID, 250 Kbaud)
9.ISO15765-4 CAN (29bit ID, 250 Kbaud)
Reference Price (FOB)
1. Single product price, USD64.70
2. 50set, USD38.80
3. 100set, USD35.00
4. 150set, USD31.50
5. 200set, USD28.30
6. 250set, USD25.50
7. 300set, USD22.95
8. 500set, USD20.65
Support one product one generation order business
More commodity specifications and preferential policies; welcome the letter to consult the business
PSA0186-2. VAG KKL 409 obd2 Volkswagen Audi car diagnostic line / test line. G KKL for the 409.1OBD2 USB Diagnostic Cable Scanner Interface, Volkswagen, Audi, Seat, Volkswagen.
Main functions: VAG KKL USB interface cable
OBDII Plug: J1962 16-pin holder (to car)
Operating software compatibility: Windows 98SE / ME / 2000 / NT and XP.
Support for terminal (K) bus communication.
Wake up the terminal (L) ignition of the Automotive Computing System (ECU) engine control unit.
There are 3 different protocols, with the same OBD2 connectors, including ISO / KWP, VPW, and VA PMW.
From 1994 to this year, working with most of the Volkswagen and Audi models sold worldwide.
Support for the ISO9141 protocol.
If your car uses a protocol bus system like a VPW, PWM, or can bus, then the VAG cable will not work.
The K diagnostic interface cable works on the ISO / KWP (Key Word Protocol), introduced after 1996.
Compatible vehicles: Volkswagen, Audi, seats:
Audi model:
-Compatibility: A2 / A3, A4 Convertible / A6 / A8, S2, S3 / TT
-Incompatibility: 80 / 100 / 200 / A3 (8P) / A4 (B7) / A6 (C6 / 4F) / A8 / A8L (D3 / 4E) / Q7
Seat Model:
-Compatible: Alhambra, Altea, Arosa, Cordova, Ibiza, Inca, Leon MK 1 / Leon MK 2 / Toledo
-Incompatible: Altea (5P) / Leon (1P) / Toledo (5P)
Skoda:
-Compatible with: Fabia / Felicia / Octavia MK 1 / Octavia MK2 / Superb
-Incompatible: For Octavia (1Z)
the masses:
-Compatible: Beetle / Pola / Caddie / Corado Golf MK2 / Golf MK3 Golf MK4 / Jetta MK3 / Jetta MK4 / Lupo / Passat MK3 / Polo MK3 / Touran / Touareg T3 / Transport T4 / Transport T5.
-Incompatible: For Golf MK5 (1K) / Golf Plus / Jetta MK5 (1K) / Passat MK5 (B6) / Passat MK6 (B6) / Phaeton / Touran (1T)
Step Price (FOB):
1. Sample unit price USD7.40,
2. 1000set, USD4.40,
3. 2000set, USD4.00,
4. 3000set, USD3.60,
5. 4000set, USD3.20.
Remarks: Free shipping for sample unit price.
PSV6 PLUS Motorcycle Bluetooth walkie-talkie (headset). Suitable for snowmobile/ATV/off-road vehicle riders such as full-face helmet/half-helmet/unmasked helmet/pulling helmet/antique helmet. Compatible with other Bluetooth walkie-talkies for 6-person groups (5-person sub-phones), the longest distance for intercom calls is 1500m, the talk time is 30H, IP67 waterproof and worry-free riding, and HD high-definition quality audio transmission.
Compatible with other bluetooth walkie-talkies 6-person group (5-person handset) connection switch intercom call,Chinese,English switch,voice call,stereo music,volume control,playback control.
Bluetooth intercom headset model: PSV6 PLUS
Main body material: ABS+PVC
Battery capacity: 3.7V / 850mAh
Working voltage: 3.0V-4.2V
Talk time: 25-30h
Standby time: 600h
Charging time: 3h
Electrical parameters: USB TYPE DC 5V/0.5A
Frequency range: 2.4GHZ
Intercom function: 6 people group real-time intercom
Speaker: Rated Power Input 20MW, Max Power Input 30MW
Microphone: -35dB -41dB
Bluetooth mode: BT5.1
Intercom distance: 1500M
Bluetooth transmission: 50M
Charging mode: plug-in charging for 3h
Waterproof grade: IP65
Working temperature: -30 +60
Operating System (iOS): Mac ios Android
Step Price (FOB):
1. Sample unit price USD70.00
2. 200set, USD42.00
3. 400set, USD37.80
4. 600set, USD34.02
5. 800set, USD30.62
6.â?¥100set, USD27.56
single pack
Carton size: 9.5 12 6CM
Product gross weight: 0.248kg
Packing Specifications
Carton size: 50 32 31.3CM
Packing gross weight: 15.6kg
Packing quantity: 60 boxes
PSGOTALK4 Motorcycle Bluetooth walkie-talkie (headset). Suitable for motorcycle full-face helmet/half-helmet/uncovered helmet/ rally helmet/antique helmet and another snowmobile/ATV/off-road vehicle riders. Compatible with other Bluetooth walkie-talkies, 4-person group (3-person sub-phones) to connect to the intercom, the longest distance is 2000m, the talk time is 22hours, IP67 waterproof and worry-free riding, HD high-definition quality audio transmission.
Compatible with other bluetooth walkie-talkies 4-person group (3-person handset) connection switch intercom call,Chinese,English switch,voice call,stereo music,volume control,playback control
Bluetooth intercom headset model: PSGOTALK4
Main body material: ABS+PVC
Battery capacity: 3.7V/500mAh
Working voltage: 3.0V-4.2V
Talk time: 15-20h
Standby time: 300h
Charging time: 3h
Electrical parameters: USB TYPE DC 5V/1.5mA
Frequency range: 2.402GHz-2.480GHz
Radio frequency band: 60MHz-108 MHz
Transmit power: 20dBm (100mW)
Intercom function: 4 people group real-time intercom
Speaker: Rated Power Input 20MW, Max Power Input 30MW
Microphone: 88dBm
Bluetooth mode: BT5.1
Intercom distance: 2000M
Bluetooth transmission: 50M
Charging mode: plug-in charging for 3h
Waterproof grade: IP65
Working temperature: -30 +60
Operating System (iOS): Mac ios Android
Step Price (FOB):
1. Sample unit price USD86.15
2. 200set, USD51.69
3. 400set, USD46.52
4. 600set, USD41.87
5. 800set, USD37.68
6. 100set, USD33.91
Single pack
Carton size 13.5x12.5x6CM
Single box gross weight 315g
Single box gross weight 16.5kg
Single box size 51.5*46*30cm
48 units in a single box
PSV8 Motorcycle Bluetooth Walkie-talkie (Headset). Suitable for snowmobile/ATV/off-road vehicle riders such as full-face helmet/half-helmet/unmasked helmet/pulling helmet/antique helmet. Compatible with other Bluetooth walkie-talkies, 5-person group connection intercom calls up to 2800m, talk time 10H, IP67 waterproof and worry-free riding, HD high-definition quality audio transmission.
Compatible with other Bluetooth walkie-talkies 5-person group intercom call,Chinese and English switching,2-person intercom distance 700 meters,wireless security controller (with handlebars installed),voice call,stereo music,volume control,playback control.
Bluetooth intercom headset model: PSV8
Main body material: ABS+PVC
Battery capacity: 3.7V/530mAh
Working voltage: 3.0V-4.2V
Talk time: 8h
Standby time: 120h
Charging time: 3h
Electrical parameters: USB TYPE DC 5V/1.5mA
Frequency range: 2.402GHz-2.480GHz
Radio frequency range: FM87.5~108MHz
Transmit power: 20dBm (100mW)
Intercom function: 5 people group real-time intercom
Speakers: 2x2.5W (stereo)
Microphone: 88dBm
Bluetooth mode: BT3.0
Intercom distance: 2800M
Bluetooth transmission: 50M
Charging mode: plug-in charging for 3h
Waterproof grade: IP65
Working temperature: -30 +60
Operating System (iOS): Mac ios Android
Step Price (FOB):
1. Sample unit price USD188.46
2. 200set, USD113.08
3. 400set, USD101.77
4. 00set, USD91.59
5. 800set, USD82.43
6. 100set, USD74.19
single pack:
Carton size 230*160*48mm,
Single box: gross weight 488g,
Single box: gross weight 10.4kg,
Single box size 48.5*26*34.5cm,
20 units per box.
