250 kVA OIL TYPE DISTRIBUTION TRANSFORMER
Measuring winding resistances
Measurinq rotation ratios
Inspecting polarity or connection group
Measuring short circuit and load losses
Measuring idle losses and current
Induced voltage test
Applied voltage test
Measuring insulation resistances
Transformers, for which mounting, drying
and oil filling works are completed, are
subjected to below mentioned routine and
typical tests as specified by TS 267 standard.
Oil breakdown stress control
Loss gap (tq) measurement (DOUBLE test)
Measuring painting thickness
Temperature increase (heating test)
Measuring of audible noise level
Boiler lifetime test (For Hermetic Transformers)
Mechanical strength test against short circuits
This test is conducted in CESI/ITALIA,
IPH/GERMANY test laboratories.)
Except for the mechanical strength test against
short circuits, all typical tests are conducted
in the laboratories of our company,
Technicial Specifications
Class: F
Frequency: 50 Hz.
Outer Diameter: 192 mm
Motor Power Range: 40 HP - 150 HP
Axial load carrying capacity: 40HP-90HP motors and 45 kN 100HP-150HP motors 55 kN
Based on 8" NEMA standards
Starting : S/M
Supply voltage : ~3, 380/415 V (-6%+10%)
Motor protection: IP 68 (Mechanical Seal)
Immersion Depth: Standard Upper Limit
Working ambient temperature : Max. 30 C
The coolant velocity passing around the engine is minimum 16 cm/sec.
Usage Areas
City Networks
Drinking Water Wells
Agricultural watering
Geothermal Wells
Seawater Transport
FEATURES
Provides cooling and lubrication with direct water without a cooling unit
Motor mounting flange and shaft end conform to NEMA standard
The motor body tube is AISI 304 motor shaft 420 stainless steel.
The motors are standard steel sealed.
Product Description
The Product Is Sold Wholesale. There Are 4 Sizes In One Series.
Sizes: S/M/L/XL
Fabric Type: Tulle - Woven fabric
Fabric Feature: 86% Polyester 14% Elastane
Sample Product (S/36/1) Information
Length: 69cm
Chest Size: 40 cm
Waistline: 43 cm
Sleeve Length: 45 cm
Mold: Full
Flexibility: None
Lining: Yes
Accessory: No
Other: It has shoulder pads. Cuff button. Inside hidden button. Pockets are for accessories.
Note: Dimensions may vary 1-3 cm.
Model Dimensions
Height: 1.75
Weight: 56
Bust: 85
Waist : 60
Hip : 90
Size: S/36/1
.
22-1YB0223
.
You can add style to your style by combining jackets that reflect the sporty and stylish combination well with vibrant colors. With its model and cut, you can both look fit and complement your elegance. When you combine the jacket with any style of trousers, tights and skirts, it will add style to your style with button, pocket and tulle sleeve detail that integrates simplicity and elegance.
Fertilization and Plant Protection
Trailed Type Turbo Atomiser
Turbofan on the machine provides compressed air around it with its propeller which takes its movement from the tractor tail axle. As standard, the movement is transferred to the turbo fan by a belt-pulley mechanism. With the separator on the fan, the propeller is prevented from rotating by taking it empty when desired. The air flow rate can be controlled by adjusting the direction of the moving fan of the fan. By adjusting the angle and direction of the nozzles on the fan or by changing the plaques, the throw distance and the amount of medication can be adjusted. By using the distributor valves on the regulator, medication can be shot in right, left or both directions. The turbo fan offers an average throw distance.
Recycle Black LDPE Granule (Low Density Polyethylene)
Recycle Blue LDPE Granule (Low Density Polyethylene)
Scrap is crushed by plastic crushing machine. It consists of a mixture of pallet cover used in its own color and multiple LDPE (Low Density Polyethylene) plastic products. Coloring is done externally.
Its crystal structure has a level between Low Density Polyethylene (LDPE) and High Density Polyethylene (HDPE). The modulus of elasticity is medium. However, it is less rigid than LDPE and much less brittle than HDPE.
It has a low friction coefficient and provides good electrical insulation. It has high chemical resistance. It can fit all thermoplastic processing processes.
Spinkle Irrigation Pipe 6m
The standard atmospheric pressure value is 5 atu. However, production can be made up to 25 atm. For other dimensions, please request information.
This product is made of polyethylene material made for high-density special pipe with increased resistance to sun rays (UV1) with special additives manufactured in accordance with TS 418 standards.
WHITE REFINED SUGAR WHOLESALE BRAZIL ORIGIN WHOLESALE SUGAR
ICUMSA 45
ICUMSA-45 Sugar is a most Highly Refined form of Sugar. ICUMSA-45 Sugar has a Sparkling White Color, and is the type most often sold direct to Consumers. It is suitable for Human Consumption and use in a wide range of Food applications. It is perpetually in High demand as it is the safest form of Sugar, due to the fact that the refining process by which it is created removes the Bacteria and Contaminants often present in raw sugars.
Note: Our sugar sales are made on a ship-based basis. 12.500 TON internal orders are not accepted. We have transit sales.
Origin: Brasil
Item Condition: New
Brand: Unbranded
Package Shape: Big Bag or 50KG sacks
Sales Type: Wholesale, Complete Ship
Documents: Analysis Reports, Quality Documents
Payment Method: Cash or SBLC (Standby Letter of Credit)
Specifications
Colour: MAX. 45 Icumsa
Polarization: MIN. 99.8 % Degree Polarization (0Z)
Moisture: MAX. 0.04 % by weight
Conductivity Ash: MAX. 0.10% by weight
Invert Sugar: MAX. 0.10 % by weight
Average Size: 0.60 - 0.90 mm.
Target M.A: 1.00 �± 1.50 mm.
Sediments: MAX. 0.02% by weight
Arsenic: MAX. 0.50mg/kg
Lead: MAX. 0.50mg/kg
Copper: MAX. 1.50mg/kg
Pesticide: NONE
Sulphur Doixide: NONE
Pathogenic Bacteria: NONE
Coli-form Bacteria: MAX. 10 CFU/10 GM
E. Coli: NONE
Yeast & Mold: MAX. 10 CFU/10 GM
