Red Express Paper Thickness: 0.2mm-0.5mm
Double-sided tape: hot-melt cotton paper double-sided tape, oil-glue cotton paper double-sided tape
Insulation class of red express paper: B class
Breakdown voltage: greater than 4KV
Red Express Paper Product Features
The red fast paper has the functions of insulation and anti-interference, high electrical insulation, mechanical strength, softness and elasticity; the red fast paper is particularly resistant to acid and alkali corrosion, tear resistance and wear resistance, and is not sensitive to moisture. , Non-toxic and flame-resistant, red fast paper has strong inherent dielectric strength, mechanical toughness, flexibility and resilience, and good thermal stability.
Factors affecting the performance of red express paper
1. Insulation resistance and resistivity: The smaller the conductivity of the material, the greater its resistance, and the two have an inverse relationship. For red fast paper insulation materials, it is always hoped that the resistivity is as high as possible.
2. Relative permittivity and dielectric loss tangent.
3. Breakdown voltage and electrical strength: Under a certain strong electric field, the red fast paper insulating material is damaged, and the insulating properties are lost and become conductive, which is called breakdown. The voltage at breakdown is called breakdown voltage (dielectric strength). Electric strength is the quotient of the voltage when breakdown occurs under specified conditions and the distance between the two electrodes subjected to the applied voltage, that is, the breakdown voltage per unit thickness. For red fast paper insulation materials, generally the higher the value of breakdown voltage and electrical strength, the better.
Black PC roll Features: The product has excellent appearance characteristics, not only durable, but also extremely easy to print. It does not need surface pretreatment and special ink, and it can show good ink adhesion.
Uses: Widely used in membrane switches, instrument switches, brackets, commercial and communication equipment, POP display panels, medical diagnostic equipment, automotive instruments, etc.
Existing specification coil: 930mm wide
Appearance: black one side glossy and one side matte
Uses: Widely used in membrane switches, instrument switches, brackets, commercial and communication equipment, POP display panels, medical diagnostic equipment, automotive instruments, etc.
PC film (also called polycarbonate film, because the thickness is relatively thin, generally called film or sheet below 1.0mm, generally called pc board above 1.0): PC film thickness is between 0.125 and 1.0, with smooth and frosted , There are coils and sheets. There are sheets and coils. The sheets are one by one. The coil has a certain width and a length of several hundred meters. The general thickness is: 0.125, 0.175, 0.2, 0.25, 0.3, 0.375, 0.5, 0.7, 0.8, 1.0. Among them, 0.125, 0.175, 0.2, 0.25, 0.3, 0.375, etc. are mainly coiled materials, while other thicknesses are mainly sheet materials
The flame retardant cotton paper double-sided adhesive tape is made of high tensile white flame retardant cotton paper as the substrate, coated with environmentally friendly flame retardant acrylic adhesive on both sides, and isolated with blank double-sided release paper; Good flame retardant effect, balanced adhesion and holding force, excellent weather resistance, and wide application range.
Thickness: 110 ± 5 m
Specification: 1020mm * 50m/100m, or according to customer requirements
Application:
The application of adhesive and fixed flame retardant materials in industries such as electronics and electrical appliances, such as batteries, sound-absorbing foam, film switches, Mylar sheets, etc.
Testing methods for typical test values of inspection project units
Suggestions for storage, transportation, and use:
Store in a dry and clean warehouse with a temperature of 5 -30 and a storage period of one year. Avoid mixing and transporting with organic solvents and sharp objects, and do not roll or throw them.
Based on the properties of pressure sensitive adhesive tape, we sincerely recommend:
1) The recommended usage conditions for adhesive tapes are 20-35 and 30-60% RH;
Black PC roll Features: The product has excellent appearance characteristics, not only durable, but also extremely easy to print. It does not need surface pretreatment and special ink, and it can show good ink adhesion.
Uses: Widely used in membrane switches, instrument switches, brackets, commercial and communication equipment, POP display panels, medical diagnostic equipment, automotive instruments, etc.
Existing specification coil: 930mm wide
Appearance: black one side glossy and one side matte
PET sheet is a new type of material developed in recent years. With its excellent toughness, high strength, high transparency, and excellent environmental performance that it can be recycled and reused, and does not produce harmful gases when burned, it has gradually been greatly appreciated by consumers and producers. Green ignorance; conform to the trend of environmental protection. PET sheet has the following main characteristics:
1. It has excellent transparency and smoothness, and has a good display effect.
2. Excellent surface decoration performance, can be printed without surface treatment, easy to emboss patterns, easy to metal treatment.
3. Has good mechanical strength.
4. Good barrier properties to oxygen and water vapor.
5. Good chemical resistance, can withstand the erosion of various chemical substances.
6. It is non-toxic and has reliable hygienic performance. It can be used for the packaging of food, medicine and medical equipment, and can be sterilized by gamma rays.
7. It has good adaptability to environmental protection, and can be recycled and reused economically and conveniently; when the waste is incinerated, it does not produce harmful substances that endanger the environment. The thermoforming performance is good, which is equivalent to ordinary PVC sheet, and PET thermoforming products with excellent performance can be obtained by vacuum forming; PET sheet is considered to be an ideal packaging material that meets the requirements of environmental protection.
use:
1. Vacuum forming: food packaging, toy boxes, stationery boxes, gift boxes and tools, hardware packaging;
2. Antistatic application: electronic parts packaging, permanent conductive sheet, permanent antistatic sheet, permanent semi-conductive sheet;
3. General purpose: blister, folding box, packaging, printing, card making, etc.
Performance parameters:
1. Density 1.33g/cm Oxygen permeability 4-4.5cm*mm/(m*24h*0.1mpa)
2. Tensile strength longitudinal 53MPA moisture permeability â?? 3G*mm/(M*24H); transverse 53MPA maximum operating temperature is nearly 70 degrees
3. The elongation at break is 250% longitudinally and 250% laterally
4. Heating dimensional change longitudinal 5% transverse 5%
PET sheet is a new type of material developed in recent years. With its excellent toughness, high strength, high transparency, and excellent environmental performance that it can be recycled and reused, and does not produce harmful gases when burned, it has gradually been greatly appreciated by consumers and producers. Green ignorance; conform to the trend of environmental protection. PET sheet has the following main characteristics:
1. It has excellent transparency and smoothness, and has a good display effect.
2. Excellent surface decoration performance, can be printed without surface treatment, easy to emboss patterns, easy to metal treatment.
3. Has good mechanical strength.
4. Good barrier properties to oxygen and water vapor.
5. Good chemical resistance, can withstand the erosion of various chemical substances.
6. It is non-toxic and has reliable hygienic performance. It can be used for the packaging of food, medicine and medical equipment, and can be sterilized by gamma rays.
7. It has good adaptability to environmental protection, and can be recycled and reused economically and conveniently; when the waste is incinerated, it does not produce harmful substances that endanger the environment. The thermoforming performance is good, which is equivalent to ordinary PVC sheet, and PET thermoforming products with excellent performance can be obtained by vacuum forming; PET sheet is considered to be an ideal packaging material that meets the requirements of environmental protection.
Performance parameters:
1. Density 1.33g/cm Oxygen permeability 4-4.5cm*mm/(m*24h*0.1mpa)
2. Tensile strength longitudinal 53MPA moisture permeability â?? 3G*mm/(M*24H); transverse 53MPA maximum operating temperature is nearly 70 degrees
3. The elongation at break is 250% longitudinally and 250% laterally
4. Heating dimensional change longitudinal 5% transverse 5%
PET sheet is a new type of material developed in recent years. With its excellent toughness, high strength, high transparency, recyclability, and excellent environmental performance of burning and not producing harmful gases, it has gradually been greatly appreciated by consumers and producers. Green ignorance; conform to the trend of environmental protection. PET sheet has the following main features:
1. It has excellent finish and good display effect.
2. Excellent surface decoration performance, can be printed without surface treatment, easy to suppress patterns and easy to metal treatment.
3. It has good mechanical strength.
4. Good barrier performance to oxygen and water vapor.
5. Good chemical resistance and can withstand the erosion of a variety of chemical substances.
6. It is non-toxic and has reliable hygienic performance. It can be used for packaging food, medicine and medical equipment, and it can be Y-ray to sterilize the packaged items.
7. It has good adaptability to environmental protection and can be recycled economically and conveniently; when its waste is incinerated, no harmful substances harmful to the environment will be produced. The thermoforming performance is good, which is comparable to ordinary PVC sheets, and can be vacuum formed to produce PET thermoformed products with excellent performance; PET sheets are considered to be an ideal packaging material that meets the requirements of environmental protection.
Performance parameters:
1. Density 1.33g/cm oxygen permeability 4-4.5cm*mm/(m*24h*0.1mpa)
2. Tensile strength longitudinal 53MPA moisture permeability 3G*mm/(M*24H); transverse 53MPA maximum operating temperature is nearly 70 degrees
3. The elongation at break is 250% in the longitudinal direction and 250% in the transverse direction
4. The heated size changes longitudinally 5% and transversely 5%
Red steel paper insulating paper is a kind of soft composite material.
Insulation class: B class; temperature resistance: 130 .
Appearance: Even surface, no fluff, and no defects such as bubbles, wrinkles and blemishes
Uses: Red steel paper combines the good insulation properties of wood pulp insulation paper and the good dielectric strength of polyester film. It is widely used in electrical equipment, and is suitable for slot insulation, turn-to-turn insulation and gasket insulation of B-class motors.
Red insulation paper materials
Red insulation paper is a soft composite material made of polyester film coated with adhesive and a two-layer insulation paper made of wood pulp insulation paper on one side.
Insulation level: Class B; Temperature resistance: 130 â??.
Appearance: The surface is uniform, free from burrs, bubbles, wrinkles, and defects
Usage: Red Kuaiba paper combines the excellent insulation performance of wood pulp insulation paper and the good dielectric strength of polyester film, widely used in electrical equipment, suitable for slot to slot insulation, turn to turn insulation, and pad insulation of B-class motors.
Characteristics of Red Quick Bus Paper Products
Red fast paper has insulation and anti-interference effects, high electrical insulation, mechanical strength, softness, and elasticity; Red fast paper is particularly resistant to acid and alkali corrosion, tear and wear resistance, insensitive to moisture, non-toxic and flame resistant. Red fast paper has strong inherent dielectric strength, mechanical toughness, flexibility and resilience, and good thermal stability.
F-grade DMD (6641) polyester film polyester fiber non-woven soft composite material
Features and Applications: Polyester film polyester fiber composite material is a composite material made of polyester film coated with F-grade adhesive on both sides, and polyester fiber nonwoven fabric on both sides. The heat resistance rating is F grade, with good dielectric performance and high mechanical strength, suitable for Y series and J02 series motors, as well as slot and turn to turn insulation in electrical appliances.
Cyan / Highland barley paper insulation paper material
Green shell paper, also known as highland barley paper, is a common name for blue thin electrical insulating cardboard. Made from a mixture of wood fibers or cotton fibers and processed through certain processes, the green shell paper combines the excellent insulation performance of wood pulp insulation paper and the good dielectric strength of polyester film.
The commonly used colors for thin electrical insulating cardboard are yellow and cyan, commonly known as yellow shell paper and cyan paper.
Highland barley paper is processed with 100% wood pulp and has good electrical and mechanical properties. It is widely used as an insulation material in motors, appliances, instruments, and switches. It can also be used in 6520 polyester film composite foil base paper. The thickness of the cardboard is 0.1mm-0.5mm, and its colors include natural color, green shell color, red, blue, yellow, and so on.
Characteristics and usage:
Green shell paper has good mechanical strength, high electrical strength, flat and smooth surface, and high toughness. It is widely used as an insulation material in equipment such as motors, electrical appliances, and instruments. It is also used for slot to slot insulation, turn to turn insulation, and pad insulation of B-class motors. Simultaneously used for making 6250 polyester film composite foil.
Use screws to fasten the wings and heads of a ceiling fan for home use, with a layer of green shell paper spaced between them. There is a green shell paper sandwiched between the press ring of the lathe spindle and the gearbox.
Highland barley paper insulating paper material
Green shell paper, also known as highland barley paper, is a common name for cyan thin electrical insulating cardboard. It is made from wood fiber or mixed pulp mixed with cotton fiber, and is manufactured by a certain process. Green shell paper combines the good insulation properties of wood pulp insulation paper and the good dielectric strength of polyester film.
The commonly used colors of thin electrical insulating cardboard are yellow and cyan, yellow is commonly known as yellow shell paper, and cyan is commonly known as green shell paper.
Features and uses: Green shell paper has good mechanical strength, high electrical strength, smooth product surface, and rich toughness. It is widely used as insulating material in motors, electrical appliances, instruments and other equipment, and is also used for B-class motors. Slot insulation, turn-to-turn insulation and pad insulation. At the same time, it is used to make 6250 polyester film composite foil. For example, a layer of green shell paper is fastened between the fan wing and the fan head of a household ceiling fan with screws. Green shell paper is sandwiched between the lathe spindle press ring and the gear box.
Features: good insulation, flexibility, water resistance, wear resistance, grease resistance, aging resistance, good gap blocking material.
Insulation class: B class
Temperature resistance: 135 C
Breakdown voltage: greater than 4.5KV
Appearance: Even surface, no fluff, and no defects such as bubbles, wrinkles and blemishes
Red steel paper insulating paper is a kind of soft composite material.
Insulation class: B class; temperature resistance: 130 .
Appearance: Even surface, no fluff, and no defects such as bubbles, wrinkles and blemishes
Uses: Red steel paper combines the good insulation properties of wood pulp insulation paper and the good dielectric strength of polyester film. It is widely used in electrical equipment, and is suitable for slot insulation, turn-to-turn insulation and gasket insulation of B-class motors.
The thickness of PC film is between 0.125 and 1.0. There are smooth and frosted, and there are coils and sheets. There are sheets and coils. The sheets are one by one. The coil has a certain width and a length of several hundred meters. long;
The thicknesses are: 0.125, 0.175, 0.2, 0.25, 0.3, 0.375, 0.5, 0.7, 0.8, 1.0. Among them, 0.125, 0.175, 0.2, 0.25, 0.3, 0.375, etc. are mainly coiled materials, while other thicknesses are mainly sheet materials
PC sheet is mainly used in optical electronics, medical equipment, high-speed railway aviation, printing anti-counterfeiting, LED display, automotive industry and electronics, electrical industry, liquid crystal display and industrial machinery parts, plating mirror, various signs, printing, membrane switch backlight Window lenses, special printing, helmets, signs, nameplates, protective covers, power system insulation, disk drive insulation, keyboard insulation, TV/display insulation, computer motherboard insulation, electronic components, electrical enclosures, switch panels, and other electronic products , Junction boxes and charger shells, automotive instrumentation and panel printing with flame-retardant requirements, electronic packaging, luggage, sports equipment, instrument panels, auto parts, controller panels, membrane switches, electrical products, etc., optical accessories, optical displays , Flat panel display, high-speed rail aviation, medical equipment, lighting lamp film, surgical lamp film, electrical panel, nameplate, protective mask, sun hat, sunglasses, mobile phone, MP3, MP4, DVD, etc.
Transparent PC sheet, thickness 0.7, 0.8, 1.0, 1.2, 1.5, etc., width 915mmx1830mm
It can be used for printing as a base plate, and can also be used as a window, etc.
Complete specifications, welcome to inquire
"PVC transparent film sheet PVC-TM-025" parameter description
Is it in stock: Yes Certification: ROHS, REACH
Material: PVC Processing method: Calendering method
Type: Thermoplastic Model: PVC-TM-025
Specifications: 0.25mmx760mm Trademark: Dan Mason
Packing: cardboard or carton Yield: 100000000
Detailed introduction of "PVC transparent film sheet PVC-TM-025"
PVC film sheet
The full name is Polyvinylchlorid, the main ingredient is polyvinyl chloride, and other ingredients are added to enhance its heat resistance, toughness, ductility, etc.
PVC can be divided into soft PVC and hard PVC. Among them, hard PVC accounts for about 2/3 of the market, and soft PVC accounts for 1/3. Soft PVC is generally used for the surface of floors, ceilings and leather, but because soft PVC contains softeners (this is also the difference between soft PVC and hard PVC), it is easy to become brittle and difficult to store, so its scope of use is limited. Hard PVC does not contain softeners, so it has good flexibility, easy to form, not easy to be brittle, non-toxic and pollution-free, and has a long storage time, so it has great development and application value.
The essence of PVC is a vacuum blister film, which is used for surface packaging of various panels, so it is also called decorative film and adhesive film, and is used in many industries such as building materials, packaging, and medicine. Among them, the building materials industry accounts for the largest proportion, at 60%, followed by the packaging industry, and several other industries with small-scale applications. PVC is a polyvinyl chloride plastic with bright color, corrosion resistance, firmness and durability. Due to the addition of some toxic auxiliary materials such as plasticizers and anti-aging agents in the manufacturing process, its products generally do not store food and medicine.
The optimum molding temperature of PVC is 170â??-180â??, that is to say, the melt temperature is around 170â??-180â??. At this temperature, PVC becomes a viscous fluid state, and its physical properties reach the highest level.
Thickness: 0.15MM-0.5MM
Color: transparent
Features: Cold resistance, low toxicity, etc.
Uses: screen printing/pad printing/offset printing, high frequency voltage and sewing. Widely used in handbags, cosmetic bags, stationery fabrics or accessories, toys and gifts, etc.
Printing grade frosted PC film Suitable for special printing, helmets, signs, nameplates, protective covers, etc.
Anti-scratch PC film Uses: window lenses for electronic products such as mobile phones, MP3, MP4, DVD, and backlights
"PVC transparent film sheet PVC-TM-02" parameter description
Is it in stock: Yes Certification: ROHS, REACH
Material: PVC Processing method: Calendering method
Type: Thermoplastic Model: PVC-TM-020
Specifications: 0.2mmx760mm Trademark: Dan Mason
Packing: cardboard or carton Yield: 100000000
Detailed introduction of "PVC transparent film sheet PVC-TM-02"
PVC film sheet
The full name is Polyvinylchlorid, the main ingredient is polyvinyl chloride, and other ingredients are added to enhance its heat resistance, toughness, ductility, etc.
PVC can be divided into soft PVC and hard PVC. Among them, hard PVC accounts for about 2/3 of the market, and soft PVC accounts for 1/3. Soft PVC is generally used for the surface of floors, ceilings and leather, but because soft PVC contains softeners (this is also the difference between soft PVC and hard PVC), it is easy to become brittle and difficult to store, so its scope of use is limited. Hard PVC does not contain softeners, so it has good flexibility, easy to form, not easy to be brittle, non-toxic and pollution-free, and has a long storage time, so it has great development and application value.
The essence of PVC is a vacuum blister film, which is used for surface packaging of various panels, so it is also called decorative film and adhesive film, and is used in many industries such as building materials, packaging, and medicine. Among them, the building materials industry accounts for the largest proportion, at 60%, followed by the packaging industry, and several other industries with small-scale applications. PVC is a polyvinyl chloride plastic with bright color, corrosion resistance, firmness and durability. Due to the addition of some toxic auxiliary materials such as plasticizers and anti-aging agents in the manufacturing process, its products generally do not store food and medicine.
The optimum molding temperature of PVC is 170â??-180â??, that is to say, the melt temperature is around 170â??-180â??. At this temperature, PVC becomes a viscous fluid state, and its physical properties reach the highest level.
Thickness: 0.15MM-0.5MM
Color: transparent
Features: Cold resistance, low toxicity, etc.
Uses: screen printing/pad printing/offset printing, high frequency voltage and sewing. Widely used in handbags, cosmetic bags, stationery fabrics or accessories, toys and gifts, etc.
PET sheet is a new type of material developed in recent years. With its excellent toughness, high strength, high transparency, and excellent environmental performance that it can be recycled and reused, and does not produce harmful gases when burned, it has gradually been greatly appreciated by consumers and producers. Green ignorance; conform to the trend of environmental protection. PET sheet has the following main characteristics:
1. It has excellent transparency and smoothness, and has a good display effect.
2. Excellent surface decoration performance, can be printed without surface treatment, easy to emboss patterns, easy to metal treatment.
3. Has good mechanical strength.
4. Good barrier properties to oxygen and water vapor.
5. Good chemical resistance, can withstand the erosion of various chemical substances.
6. It is non-toxic and has reliable hygienic performance. It can be used for the packaging of food, medicine and medical equipment, and can be sterilized by gamma rays.
7. It has good adaptability to environmental protection, and can be recycled and reused economically and conveniently; when the waste is incinerated, it does not produce harmful substances that endanger the environment. The thermoforming performance is good, which is equivalent to ordinary PVC sheet, and PET thermoforming products with excellent performance can be obtained by vacuum forming; PET sheet is considered to be an ideal packaging material that meets the requirements of environmental protection.
Performance parameters:
1. Density 1.33g/cm Oxygen permeability 4-4.5cm*mm/(m*24h*0.1mpa)
2. Tensile strength longitudinal 53MPA moisture permeability 3G*mm/(M*24H); transverse 53MPA maximum operating temperature is nearly 70 degrees
3. The elongation at break is 250% longitudinally and 250% laterally
4. Heating dimensional change longitudinal 5% transverse 5%
Name: PET sheet, PET transparent sheet, PET film, PET coil, PET sheet with high transparency, PET film
Thickness: 12 silk - 200 silk
Width: 100mm 1100mm
Process: Extrusion
Color: transparent, porcelain white, color chips, customized according to user needs or samples
use:
1. Vacuum forming: food packaging, toy boxes, stationery boxes, gift boxes and tools, hardware packaging;
2. Antistatic application: electronic parts packaging, permanent conductive sheet, permanent antistatic sheet, permanent semi-conductive sheet;
3. General purpose: blister, folding box, packaging, printing, card making, etc.
parameter description
Is it in stock: Yes Certification: ROHS, UL, REACH
Material: Polyvinyl chloride PVC Processing method: Extrusion
Type: Thermoplastic Model: PVC-MSH-015
Size: 0.15 Brand: Dan Mason
Packing: Carton or stretch film Color: Double Sided Matte Black
Yield: 100000000
 detailed introduction
Matte black PVC film sheet roll
PVC membrane
PVC (polyester fiber type) membrane material
Classification According to the intensity level, it is divided into grades
Explain that the fabric substrate of PVC film material should be polyester and polyamide fiber fabrics. The coating is mainly polyvinyl chloride (PVC) resin, and the weight of different coatings should be between 400 and 1500g/m2 according to functional requirements. PVDF), polypropylene resin (ACRYLIC), silicone resin, etc., and should have the function of improving the self-cleaning and anti-aging properties of PVC film materials. The thickness of the PVC film material should be greater than 0.5mm. The surface layer should have stable anti-corrosion and anti-ultraviolet erosion capabilities during the shelf life, and should have self-cleaning properties.
Selection points
1) The surface layer of the PVC film material should have stable anti-corrosion and anti-ultraviolet erosion capabilities during the shelf life, and the surface should have self-cleaning properties.
2) After the PVC film material reaches the melting point in the fire environment, a melting hole will appear, and the boundary of the melting hole will burn and spread, but no open fire will be generated. According to my country's GB8624 "Classification Method of Combustion Performance of Building Materials", it is designated as B1 grade flame-retardant material.
Is it in stock: Yes Certification: UL, ROHS, REACH
Type: Polycarbonate PC Processing Method: Film Press
Color: Black Model Number: pc-fr-020
Specifications: Any cutting according to customer requirements Trademark: Dan Mason
Packaging: stretch film Yield: 10000000000
Detailed introduction of "fire retardant pc film pc-fr-020"
Fire retardant PC film
Fire retardant pc film pc-fr-020. The thickness of the pc film is between 0.125 and 1.0, with smooth and frosted surfaces, and there are coils and sheets. There are sheets and coils. The sheets are one by one, and the coil is a certain width and a length of several hundred meters long;
The thicknesses are: 0.125, 0.175, 0.2, 0.25, 0.3, 0.375, 0.5, 0.7, 0.8, 1.0. Among them, 0.125, 0.175, 0.2, 0.25, 0.3, 0.375, etc. are mainly made of coils, while other thicknesses are mainly made of sheets
PC sheet is mainly used in optical electronics, medical equipment, high-speed rail aviation, printing anti-counterfeiting, led display, automotive industry and electronics, electrical industry, liquid crystal display and industrial machinery parts, mirror plating, various signs, printing, membrane switch backlight Window lenses, special printing, helmets, signs, nameplates, protective covers, power system insulation, disk drive insulation, keyboard insulation, TV/monitor insulation, computer motherboard insulation, electronic components, electrical enclosures, switch panels and other electronic products , junction box and charger shell, automotive instrumentation and panel printing with flame retardant requirements, electronic packaging, luggage, sports equipment, instrument panels, auto parts, controller panels, membrane switches, electrical products, etc., optical accessories, optical display , flat panel display, high-speed rail aviation, medical equipment, lighting film, surgical light film, electrical panel, nameplate, protective mask, sun hat, sunglasses, mobile phone, mp3, mp4, dvd, etc.
Uses: Widely used in membrane switches, instrument switches, brackets, commercial and communication equipment, POP display panels, medical diagnostic equipment, automotive instruments, etc.
PC film (also called polycarbonate film, because the thickness is relatively thin, generally called film or sheet below 1.0mm, generally called pc board above 1.0): PC film thickness is between 0.125 and 1.0, with smooth and frosted , There are coils and sheets. There are sheets and coils. The sheets are one by one. The coil has a certain width and a length of several hundred meters. The general thickness is: 0.125, 0.175, 0.2, 0.25, 0.3, 0.375, 0.5, 0.7, 0.8, 1.0. Among them, 0.125, 0.175, 0.2, 0.25, 0.3, 0.375, etc. are mainly coiled materials, while other thicknesses are mainly sheet materials
"Mat black PVC film sheet roll PVC-MSH-026" parameter description
Is it in stock: Yes Certification: ROHS, UL, REACH
Material: Polyvinyl chloride PVC Processing method: Extrusion
Type: Thermoplastic Model: PVC-MSH-026
Size: 026
Black PC roll Features: The product has excellent appearance characteristics, not only durable, but also extremely easy to print. It does not need surface pretreatment and special ink, and it can show good ink adhesion.
Uses: Widely used in membrane switches, instrument switches, brackets, commercial and communication equipment, POP display panels, medical diagnostic equipment, automotive instruments, etc.
Existing specification coil: 930mm wide
Appearance: black one side glossy and one side matte
Brand: Dan Mason
Printing grade frosted PC film suitable for special printing, helmets, signs, nameplates, protective covers, etc.
Anti-scratch PC film Uses: window lenses for electronic products such as mobile phones, MP3, MP4, DVD, backlight sources, etc.
It has excellent physical and mechanical properties, especially excellent impact resistance, high tensile strength, flexural strength and compressive strength; good heat resistance and low temperature resistance, stable mechanical properties in a wide temperature range, size Stability, electrical properties and flame retardancy, can be used for a long time at -60~120; no obvious melting point, melted at 220-230; high rigidity, high viscosity of resin melt; low water absorption and small shrinkage , Small creep, high dimensional accuracy, good dimensional stability, low permeability of the film; it is a self-extinguishing material; stable to light, but not resistant to ultraviolet light, good weather resistance; oil resistance, acid resistance.
Printing grade frosted PC film suitable for special printing, helmets, signs, nameplates, protective covers, etc.
Anti-scratch PC film Uses: window lenses for electronic products such as mobile phones, MP3, MP4, DVD, backlight sources, etc.
It has excellent physical and mechanical properties, especially excellent impact resistance, high tensile strength, flexural strength and compressive strength; good heat resistance and low temperature resistance, stable mechanical properties in a wide temperature range, size Stability, electrical properties and flame retardancy, can be used for a long time at -60~120; no obvious melting point, melted at 220-230; high rigidity, high viscosity of resin melt; low water absorption and small shrinkage , Small creep, high dimensional accuracy, good dimensional stability, low permeability of the film; it is a self-extinguishing material; stable to light, but not resistant to ultraviolet light, good weather resistance; oil resistance, acid resistance.
Printing grade frosted PC film suitable for special printing, helmets, signs, nameplates, protective covers, etc.
Anti-scratch PC film Uses: window lenses for electronic products such as mobile phones, MP3, MP4, DVD, backlight sources, etc.
It has excellent physical and mechanical properties, especially excellent impact resistance, high tensile strength, flexural strength and compressive strength; good heat resistance and low temperature resistance, stable mechanical properties in a wide temperature range, size Stability, electrical properties and flame retardancy, can be used for a long time at -60~120; no obvious melting point, melted at 220-230; high rigidity, high viscosity of resin melt; low water absorption and small shrinkage , Small creep, high dimensional accuracy, good dimensional stability, low permeability of the film; it is a self-extinguishing material; stable to light, but not resistant to ultraviolet light, good weather resistance; oil resistance, acid resistance.
Polycarbonate PC film usage:
1. Black flame-retardant PC film: used for power system insulation, disk drive insulation, keyboard insulation, TV/monitor insulation, and computer motherboard insulation. The upper and lower covers of the new energy battery pack are insulated.
2. Printing grade frosted PC film is suitable for special printing, such as helmets, signs, nameplates, protective covers, etc
3. Anti scratch PC film usage: Window lenses for electronic products such as mobile phones, MP3, MP4, DVD, backlight, etc
4. Optical grade transparent PC sheet: mobile phone tempered film base plate, lens film, etc
Polycarbonate PC film thickness:
Between 0.05mm and 2.5mm, available in black, natural color, transparent, brown, etc., divided into rolls and sheets, with coil specifications of 930mmx89.3KG and sheet specifications of 930mmx1830mm; 1244mmx1830mm
"Mat black PVC film sheet roll PVC-MSH-015" parameter description
Is it in stock: Yes Certification: ROHS, UL, REACH
Material: Polyvinyl chloride PVC Processing method: Extrusion
Type: Thermoplastic Model: PVC-MSH-015
Size: 0.15 Brand: Dan Mason
Packing: Carton or stretch film Color: Double Sided Matte Black
Yield: 100000000
"Mat black PVC film sheet roll PVC-MSH-015" detailed introduction
Matte black PVC film sheet roll
PVC membrane
PVC (polyester fiber type) membrane material
Classification According to the intensity level, it is divided into grades
Explain that the fabric substrate of PVC film material should be polyester and polyamide fiber fabrics. The coating is mainly polyvinyl chloride (PVC) resin, and the weight of different coatings should be between 400 and 1500g/m2 according to functional requirements. PVDF), polypropylene resin (ACRYLIC), silicone resin, etc., and should have the function of improving the self-cleaning and anti-aging properties of PVC film materials. The thickness of the PVC film material should be greater than 0.5mm. The surface layer should have stable anti-corrosion and anti-ultraviolet erosion capabilities during the shelf life, and should have self-cleaning properties.
Selection points
1) The surface layer of the PVC film material should have stable anti-corrosion and anti-ultraviolet erosion capabilities during the shelf life, and the surface should have self-cleaning properties.
2) After the PVC film material reaches the melting point in the fire environment, a melting hole will appear, and the boundary of the melting hole will burn and spread, but no open fire will be generated. According to my country's GB8624 "Classification Method of Combustion Performance of Building Materials", it is designated as B1 grade flame retardant material.
Black PP sheet: mainly coarse sand, fine sand, double-gloss, single-gloss, single-mirror sand, etc.; can be used for leather bags, leather goods, insulating gaskets, electronic nameplates, electronic gaskets; cosmetics, food, clothing , stationery, hardware products and other high-end packaging, can also be used for silk screen printing, light boxes, picture albums, folder covers, album covers, etc.
PP film sheet application
1) Stationery includes: PP folder, PP file bag, PP business card case, PP briefcase, PP pencil case, PP pencil holder, PP data book, PP paging card, PP separator, PP notebook cover, PP book holder, PP writing board, PP wall calendar, PP desk calendar, PP advertising umbrella, PP mouse pad, PP stationery portable box and other stationery products.
2) Gift categories include: PP gift box, PP cosmetic box, PP gift bag, PP handbag, PP handbag bottom liner, PP lining strip, PP glasses box, PP glasses display stand, PP toy box, PP tissue box and other packaging.
3) Food categories include: PP placemats, PP coasters, PP drinking cups, PP bowls, PP candy boxes, PP candy bags, PP wine boxes, PP wine bags, PP cutting boards, etc.
4) Lighting categories include: PP lampshade
5) Electronic products include: PP electronic interlayer board, PP electronic packaging box, etc.
6) Shoes and clothing categories include: PP clothing boxes, PP clothing handbags, PP clothing drawing boards, PP clothing listings, etc. PP shoe box, PP shoe lining, PP shoe pattern drawing board, etc.
7) Other PP products include: PP supermarket hanging strips, PP luggage listings, PP road signs, PP drawers, PP raincoat boxes, PP photo frames, etc.
Black PP sheet: mainly coarse sand, fine sand, double light, single light, single mirror sand, etc.; can be used for leather bags, leather goods, insulating gaskets, electronic nameplates, electronic gaskets; cosmetics, food, clothing, stationery, hardware products And other high-end packaging, it can also be used for screen printing, light boxes, picture albums, folder covers, picture album covers, etc.
PP film application
1) Stationery includes: PP folder, PP file bag, PP business card case, PP briefcase, PP pencil case, PP pencil case, PP data book, PP page card, PP separator, PP notebook cover, PP bookshelf, PP Writing pad, PP wall calendar, PP desk calendar, PP advertising umbrella, PP mouse pad, PP stationery portable box and other stationery products.
2) Gift categories include: PP gift box, PP cosmetic box, PP gift bag, PP handbag, PP handbag bottom liner, PP petticoat, PP glasses case, PP glasses display stand, PP toy box, PP tissue box and other packaging.
3) Food categories include: PP placemats, PP coasters, PP drinking cups, PP bowls, PP candy boxes, PP candy bags, PP wine boxes, PP wine bags, PP cutting boards, etc.
4) Lighting categories include: PP shade
5) Electronic products include: PP electronic intermediate film board, PP electronic packaging box, etc.
6) Footwear and clothing include: PP clothing box, PP clothing handbag, PP clothing drawing board, PP clothing list, etc. PP shoe box, PP shoe lining, PP shoe pattern drawing board, etc.
7) Other PP products include: PP supermarket hanger, PP luggage list, PP road sign, PP drawer, PP raincoat box, PP photo frame, etc.
Printing grade frosted PC film suitable for special printing, helmets, signs, nameplates, protective covers, etc.
Anti-scratch PC film Uses: window lenses for electronic products such as mobile phones, MP3, MP4, DVD, backlight sources, etc.
It has excellent physical and mechanical properties, especially excellent impact resistance, high tensile strength, flexural strength and compressive strength; good heat resistance and low temperature resistance, stable mechanical properties in a wide temperature range, size Stability, electrical properties and flame retardancy, can be used for a long time at -60~120; no obvious melting point, melted at 220-230; high rigidity, high viscosity of resin melt; low water absorption and small shrinkage , Small creep, high dimensional accuracy, good dimensional stability, low permeability of the film; it is a self-extinguishing material; stable to light, but not resistant to ultraviolet light, good weather resistance; oil resistance, acid resistance.
Black flame retardant PP sheet
Flame retardant grade: 94V-0
Black PP sheet: mainly coarse sand, fine sand, double-gloss, single-gloss, single-mirror sand, etc. (made to order) can be used for leather bags, leather goods, insulating gaskets, electronic nameplates, electronic gaskets; cosmetic Products, food, clothing, stationery, hardware and other high-end packaging, can also be used for silk screen printing, light boxes, picture albums, folder covers, album covers, etc.
Specifications: Thickness: 0.1-1.0MM, maximum width 1500MM
Special specifications and thicknesses can be customized.
PP sheet has the following characteristics: low density, good hygienic performance, good anti-corrosion and high heat resistance, and can be widely used in chemical industry anti-corrosion engineering, water purification treatment, environmental protection and other industries.
There are mainly coarse sand, fine sand, double gloss, single gloss, single mirror sand, etc. can be used for leather bags, leather goods, insulating gaskets, electronic nameplates, electronic gaskets; cosmetics, food, clothing, stationery, hardware products And other high-end packaging, can also be used for silk screen printing, light boxes, picture albums, folder covers, album covers, etc.
PVC (polyester fiber) film material
Classification According to the intensity level, it is divided into grades
Explain that the fabric base material of PVC film material should be polyester and polyamide fiber fabric. The coating is mainly polyvinyl chloride (PVC) resin. According to the functional requirements, the weight of different coatings should be between 400 1500g/m2. The surface layer should be polyvinylidene fluoride resin (PVF) and polyvinylidene fluoride resin ( PVDF), polypropylene resin (ACRYLIC), silicone resin, etc., and should have the function of improving the self-cleaning and anti-aging properties of PVC film materials. The thickness of the PVC film material should be greater than 0.5mm. The surface layer should have stable anti-corrosion and anti-ultraviolet eroding ability during the warranty period, and should have self-cleaning performance.
Selection points
1) The surface layer of the PVC film material should have stable anti-corrosion and anti-ultraviolet eroding ability during the warranty period, and the surface should have self-cleaning performance.
2) When the PVC film material reaches the melting point in a fire environment, a molten hole will appear, and the boundary of the molten hole will burn and spread, but no open flame will be produced. According to my country's GB8624 "Classification Method for Combustion Performance of Building Materials", it is designated as a Class B1 flame-retardant material.
3) The color, light reflection and transmittance of PVC film materials should meet the requirements of the following table.
Film material type Film surface color Light reflectance (%) Film surface transmittance (%)
PVC film material Milky white, translucent 75 85 613
Color 45 55 4 6
4) The main performance comparison of four different surface materials of PVC film materials is shown in the table below.
Main performance: PVC film material on the surface of polypropylene resin, PVC film material on the surface of PVDF can be spliced PVC film material on the surface of PVDF not spliced, PVC film material on the surface of PVF-film
Manufacturer warranty period 3-7 years 10 years 10 years 10 years
Aging resistance low fair good good
UV resistance low fair good good
Corrosion resistance low fair good good
Softness good good good good
Foldability Foldable Foldable Foldable Unfoldable
Self-cleaning performance low good very good very good
Splicing method Direct splicing Polishing or pasting splicing strip splicing Polishing or pasting splicing strip splicing
Material price low high high high