4G LTE USB Modem is a USB 2.0 based 4G module suitable for providing 4G internet connectivity for any Industrial router, gateway or a computer. It is based on a LTE Cat 4 module optimized specially for M2M and IoT applications. It supports data connectivity on LTE-FDD, LTE-TDD, HSDPA, HSUPA, HSPA+, WCDMA, EDGE and GPRS networks
It offers peak download rates of 150 Mbps and peak upload rates of 50Mbps while working in LTE CAT-4 Mode and provides fall back to 3G/2G networks to offer seamless connectivity.
Also, the standard USB 2.0 based connectivity over a type A cable offers ease of integration with the host device. Optionally this USB connection can be provided over a custom cable as well.
LTE CAT-4 mini PCIe MODULE is mini PCI express formfactor card based on Sierra Wireless WP7608, designed for Industrial-Grade devices with high data throughput but small form factor requirements. It Offers an application processor (ARM Cortex- A7 at 1.3GHz) running the open source Legato platform, optional GNSS receiver, and cellular modem with an ultra-low power domain. WP7608 provides an integrated device-to-cloud architecture enabling IoT developers to build a Linux-based product on a single module and seamlessly send valuable user and product data to the cloud. This module supports India specific bands for LTE, HSPA+, UMTS and GSM/GPRS/EDGE connectivity. It offers peak download rates of 150 Mbps and peak upload rates of 50Mbps while working in LTE CAT-4 Mode and provides fall back to 3G/2G networks to offer seamless connectivity. APPLICATIONS
All the above listed powerful set of features enable this module to find suitability in multiple market segments like PDAâ??s/Laptop Computer, Wireless Router and Switch, Vehicle communication System, Remote Monitoring system, etc.
INTERFACES DC POWER INPUT
10-30V Wide DC input @1A (non-isolated)
Accidental reverse voltage, ESD (IEC61000-4-2 level 4), EFT (IEC61000-4-4 level 2) and Surge (IEC61000-4-5 level 1) protected.
Internal Overvoltage, Over current protection
Internal circuitry to enable remote power ON/OFF of 12V rail.
Connection by means of 2 piece pluggable screw terminal connector CELLULAR INTERFACE
â?¢ Based on Sierra Wireless Module
â?¢ LTE CAT4 cellular connectivity with UMTS/GPRS fallback
Following key features of the Module
o 4G LTE CAT4 : B1 / B3 / B5 / B8 / B40 / B41
o 3G UMTS/HSPA+: B1/ B8
o 2G EDGE/GSM/GPRS: 900/ 1800 MHz
Interfaces
o Two SMA connectors for External Main and Diversity Antennas
o Single Nano SIM USB INTERFACE
Micro USB interface for connecting Host. GPS
Supports RF bands of GPS, GLONASS, Galileo, BeiDou
â?¢ SMA connector for External Antenna (Main and Diversity)
â?¢ Supports active or Passive GPS Antenna by assembly option
â?¢ 3.7V at 20mA available for supporting active antenna
RS-485
â?¢ 3KV isolated Half duplex RS-485 channel
â?¢ ESD (IEC61000-4-2 level 4), EFT (IEC61000-4-4 level 2) and Surge (IEC61000-4-5 level 1) protected.
Connection by means of screw terminal connectors EMMC FLASH
4GB eMMC flash for Internal Data storage
DC POWER INPUT
9-30V Wide DC input @1A (non-isolated)
Accidental reverse voltage, ESD (IEC61000-4-2 level 4), EFT (IEC61000-4-4 level 2) and Surge (IEC61000-4-5 level 1) protected.
Internal Overvoltage, Over current protection
Internal circuitry to enable remote power ON/OFF of 12V rail.
Connection by means of 2 piece pluggable screw terminal connector CELLULAR INTERFACE
Based on Sierra Wireless Module
LTE CAT4 cellular connectivity with UMTS/GPRS fallback
ï?·Following key features of the Module
4G LTE CAT4 : B1 / B3 / B5 / B8 / B40 / B41
3G UMTS/HSPA+: B1/ B8
2G EDGE/GSM/GPRS: 900/ 1800 MHz
Interfaces
Two SMA connectors for External Main and Diversity Antennas
Single Nano SIM USB INTERFACE
Micro USB interface for connecting Host.
Enumerate like ECM port GPS
Supports RF bands of GPS, GLONASS, Galileo, BeiDou
SMA connector for External Antenna
Supports active or Passive by assembly option
3.7V at 20mA available for supporting active antenna 10/100 ETHERNET INTERFACE
One 10/100 Ethernet Interface
ESD (IEC61000-4-2 level 4), EFT (IEC61000-4-4 level 2) and Surge (IEC61000-4-5 level 2) protected.
Connection by means of standard RJ-45 connector STORAGE
SD Card socket for Internal Data storage
INTERFACES DC POWER INPUT
9-30V Wide DC input @1A (non-isolated)
Accidental reverse voltage, ESD (IEC61000-4-2 level 4), EFT (IEC61000-4-4 level 2) and Surge (IEC61000-4-5 level 2) protected.
Internal Overvoltage, Over current protection
Internal circuitry to enable remote power ON/OFF of 12V rail.
Connection by means of DC jack ETHERNET INTERFACES
Five port 10/100 Mbps Ethernet Switch
WAN and 4 LAN ( Configurable)
ESD (IEC61000-4-2 level 4), EFT (IEC61000-4-4 level 2) and Surge (IEC61000-4-5 level 2) Protected.
Connection by means of standard RJ-45 connector WLAN INTERFACE
2T2R 802.11 b/g/n 2.4 GHz
300Mbps Wi-Fi AP with Encryption
Frequency range : 2.4GHz~2.497GHz
Security: WEP/TKIP/AES/WPS/WPA/WPA2
WEP 64/128, WPA, WPA2 Engine
TX output power : +16.5dBm
One external antenna CELLULAR INTERFACES
Two Mini PCI Express slots to connect 2G/3G/4G modules ( One optional)
Optional GPS
Interfaces
USB 2.0 High speed interface (to the CPU)
Single or optional Dual SIM
One external antenna USB 2.0 INTERFACE ( OPTIONAL)
One USB 2.0 full speed capable Host interface
Standard USB 2.0 Type A Host connector OPTIONAL EXPANSION INTERFACE
Expansion interfaces to support more IOs, RS232, RS485, etc PROCESSING COMPLEX CPU & MEMORY
