Application:
ZYD Series Double-Stage Vacuum Insulation Oil Purifier can quickly and effectively remove moisture, gas (Hydrogen, acetylene, methane, etc.) and impurities from the insulation oil, to improve the oil dielectric performance. The filtered oil can effectively ensure the power equipment run safely and normally. ZYD Double-stage vacuum oil purifier is widely used in power supply, power generation, power transmission and transformation, power equipment manufacturing, power engineering, electrical equipment maintenance, power testing, electrical research and other industries. It is especially suitable for the filtration of high-grade transformer oil and ultra-high transformer oil, and can be applied to online oil filtering operations at the power substation (like 110KV / 220KV / 500KV). Meanwhile, ZYD oil purifier has the functions of vacuum drying, vacuum oil injection, and hot oil circulation. It can also be used as a separate vacuum pumping unit to evacuate transformers and power equipment.
Features:
The vacuum system uses the roots pump as the main pump and the rotary vane vacuum pump as the primary pump. Fast start-up, large pumping speed, stable performance, and high ultimate vacuum of less than 5Pa.
Double horizontal vacuum separators, combined with Duplex-Stereo film evaporation technology
Strong ability to remove impurities: ultra-large area cylindrical precision filter element, with high filtration accuracy, easy installation and replacement. Low-load heating: Adopt advanced internal and external double-tube heat radiation indirect heating technology.
Automatic control to realize unattended, safe and stable working.
Safety interlock protection for oil pump, vacuum pump, heater,keep safely working
Low noise, easy operation, long maintenance interval, low energy consumption, low operating cost
It can be used together with the insulation oil regeneration device, which has the effect of decoloring, deacidification, deoxidation and removing free carbon and other harmful substances from the oil.
Technical Parameters:
Index Unit ZYD-30 ZYD-50 ZYD-100 ZYD-150 ZYD-200 ZYD-250 ZYD-300
Flow Rate L/H 1800 3000 6000 9000 12000 15000 18000
Working VacuumMPa -0.08-0.099
Working Pressure MPa 0.4
Working Temperature 20 80
Power Supply 380V 50HZ,3Ph (or According to user demand)
Working Noise dB(A) 65 85
Heating Power Kw 24 30 60 90 120 150 180
Total Power Kw 27.5 35 65 96.5 128 162 185
Inlet / Outlet mm 25 32 40 50 50 65 65
Weight kgs 550 650 880 1000 1250 1550 1800
Dimension L mm 1500 1550 1650 1800 2000 2150 2400
W mm 1450 1450 1550 1650 1750 1750 1800
H mm 1700 1750 1800 1900 2100 2200 2200
After Purification Breakdown Voltage KV 70
Water Content ppm 3
Gas Content % 0.1
Particles m 1
JZC Waste Oil Refinery Plant
Application:
Waste oil usually collected from machinery, vehicles, ships etc. which color is black and very dirty. Because the waste oil contains too much contamination, including non-hydrocarbon, alkene, polycyclic aromatic hydrocarbon, metal hydronium, impurities, metal particles, asphaltene and colloid etc. thereby it is harmful for the lubricating system and car engine etc, waste oil lost itâ??s control friction which have to be replaced.
Transitional way to recycling the waste oil is by acid way,So our company researches the new waste oil vacuum distilling machine (JZC waste oil distillation machine), it is special for distilling and regenerating the black waste lube oil, including waste engine oil, lube oil, hydraulic oil, gear oil, dirty diesel oil, mixed oils etc. JZC waste oil distillation machine heat the waste oil to (from 110 to 350) different temperature under high vacuum condition, making Hydrocarbon molecules break out, and re-order combination, forming diesel oil, lubricating base oil etc. JZC machine is very suitable for the small oil refinery company, also for the small oil company who want to make the oil by self.
Advantage:
Safety design, during the working process, raw materials oil is always flowing and flashing between the distillation tank and heating system, there is no any coking happen in the pipes and tanks, so the system is 100% safety, and long life time. There are optional ways to heat the oil, like the boiler way by using fuel, natural gas or coal. Also, if machine is small capacity, we can use the electric heating way.
By using the high vacuum distilling way, so the distilling temperature is low, energy saving and safety.
Using the special chemicals to catalyze the waste oil, which makes sure the final diesel oil, gasoline oil and base oil are good anti-oxidation with good color, there is no bad odor. The final oil can be storage for one year without color change and odor change.
Technical Parameter:
Index Unit JZC-2 JZC-5 JZC -10 JZC -20
Capacity Ton / day 2 10 20
Recovery ratio % Above 85%
Working pressure MPa 0.4
Working vacuum MPa -0.08 ~ -0.0998
Working Temperature 80-350
Working Noise dB (A) 75
Power supply V 380v, 50hz, 3Phase (Or According user demand)
Heating way Electromagnetic-Heater or boiler ( fuel, natural gas or coal)
Pump Motor Power kW 15 25 45 60
Working Size M2 200 300 500 700
Recovery rate:
Final products Ratio Percentages Distillation temperature Vacuum Value
Water 2% 80-110 -0.098
Gasoline and diesel 8% 120-210 500Pa
Light base oil 40% 220-290 300Pa
Heavy base oil (Viscosity SN150 ) 45% 300-350 200Pa
Oil Residual 5%
Total 100%
TYA Lubricating Oil Purifier
Application:
TYA Vacuum lubricating oil purifier mainly deals with unqualified mechanical oil, hydraulic oil, compressor oil, turbine oil, refrigerator oil etc. It can quickly and effectively remove water, gas, impurities and volatiles (such as alcohol, gasoline, ammonia, etc.) from oil. it restores oil viscosity, flash point and other performance indicators. The filtered oil is low emulsification value, low water content, high cleanliness, which can be used again and again in high-precision hydraulic lubrication equipment. TYA Oil Purifier is suitable for various kinds of lubrication purification and regeneration treatment in petroleum, chemical, mining, metallurgy, power, transportation, machinery manufacturing, railway and other industries.
Features:
The water separator uses high-molecular coalescing material as filtering medium, which integrates emulsification, dehydration and impurity removal.
Strong ability to remove impurities: ultra-large area cylindrical precision filter element, with high filtration accuracy, easy installation and replacement.
High-efficiency vacuum dehydration and degassing: Duplex-Stereo film evaporation technology Excellent heating system: carbon fiber electric heater with long service life, low heating surface load, linear temperature rise, preventing oil cracking, keeping oil uniform heating.
Automatic control to realize unattended, safe and stable working.
Safety interlock protection: oil pump, vacuum pump, heater interlock protection
Humanized instructions: automatic design, and there are instructions such as oil temperature gauge, pressure gauge, vacuum gauge, filter pollution alarm, operating status and so on.
This machine has the advantages of low noise, easy operation, long maintenance interval, low energy consumption, low operating cost, high oil filtration efficiency, long lifetime, etc.
Technical Parameters:
Index Unit
TYA-10 TYA-20 TYA-30 TYA-50 TYA-100 TYA-150 TYA-200 TYA-300
Flow rate L/H
600 1200 1800 3000 6000 9000 12000 18000
Working vacuum MPa -0.06-0.095
Working Pressure MPa 0.4
Working Temperature 20 80
Power Supply 380V 50HZ,3Ph (or According to user demand)
Working Noise dB(A) 65 80
Heating Power Kw
24 24 24 30 48 72 96 120
Total Power Kw
27 27 27 33 53 78 102 128.5
Inlet / Outlet mm
25 25 25 32 40 50 50 65
Weight kgs
450 480 500 550 650 800 1000 1300
Dimension L mm
1550
1550
1550
1650
1750
1800
1900
2100
W
mm
1100
1100
1100
1200
1250
1500
1600
1800
H
mm
1650
1650
1650
1750
1750
1850
1950
1950
After Purification
Demulsification value
min
15/min(GB/F7035)
Water Content
ppm
80
Gas Content
%
0.1
Cleanness
NAS 6