JX-230 The main technical parameters
Function stripping
Stripping length of coating layer 30mm
Heating mode Power saving mode (default)/Normal mode
Temperature setting Equipped with four temp.:70, 90, 110 and
130
Optical fiber fixing method: Adopt FH-2, FH-4, FH-8, FH-12 series fixtures
Power supply mode: Adopt 7.4V lithium battery and DC12V adapter dual
power supply
Battery usage information: Continuous heating operation time is about 5 hours
Dimensions: 136(L) x 46(D) x 41.5(H) mm
Weight: 300g (with battery, without fixture)
Environmental requirements: Humidity: lower than 65%, the use of environmental
temperature -10 -40
Applicable fiber
Optical fiber: Silica fiber
Coating material: UV curable resin
Quantity of fiber cores and coating thickness: Single-core fiber
Optical fiber coating layer 0.25--0.4mm
2 to 12 cores ribbon fiber
Ribbon fiber thickness: 0.3--0.4mm
Fiber diameter: 125�¼m
Standard configuration
Item Model Quantity
Fiber thermal stripper JX-230 1
Power adapter DC12/2A 1
8-core fixture(L) (single cover) 1
Instruction manual 1
Lithium battery 7.4V lithium battery 1
Splicing Type SM, MM, DS, NZDS
Splicing Loss 0.02dB(SM) 0.01dB(MM) 0.04dB(DS) 0.04dB(NZDS)
Return Loss >60dB
Splicing Mode Manual, Half Auto, Auto
Fiber Alignment Core to Core Alignment by PAS technology
Applicable Fiber Cable indoor and 0.25mm,0.9mm fiber, SOC connector(option)
Splicing Time 9s
Heat Time 30s Auto Heat
Cleaved Length 8-16mm
Fiber Image/ Magnification 300/150 times
View Display 4.3 inch digital high-quality LCD screen
Tension Test Standard 2N (option)
Heat Shrinkable Sleeve 60mm, 40mm and serials heat Shrinkable Sleeve
Battery Capacity 300 cycles splicing and heating, 3 hours charging time
( splicing and charging at same time)"
Battery Life Cycling charge 300-500 times, easy to replace battery
Electrodes Life 3000 splicing, easy to replace electrodes
Power Source 20W
Interface USB Convenient data download and software update
Construction Lighting Built in high brightness, wide range of lights, easy to operate at night
Power supply Built in lithium battery 5200mAh 11.1V; external adapter,
input: AC100-240V, output: DC13.5V/4.5A"
Operating Condition 0-5000m above sea level, Temperature: -10-60,
Humidity 0 95%RH (No dew)"
Weight 1.7 KG (including battery)
Dimension (LxWxH) 150mm(L) 135mm(W) 142mm(H)
Model HW-200/HW-400
Power supply 3 AAA batteries
Definition 0.5um(International standard:2um)
Weight 0.6kg
Adapter interface 2.5mm,1.25mm
Model HW-200/HW-400
Power supply 3 AAA batteries
Definition 0.5um(International standard:2um)
Weight 0.6kg
Adapter interface 2.5mm,1.25mm
Main Technical Parameters
Features This device has the function of stripping optical fiber
Stripped Length Max. 30mm
Heating Mode Normal mode/Power-saving mode
Temperature Setting Four types of temperature: 60â??,80â??,100â??,120â??
Fiber Clamped Mode Serials of holders: FH-2ã??FH-4ã??FH-8ã??FH-12
Power Supply DC 12V2A
Dimensions 117.5(L) X 46(D) X 28.5(H) mm
Weight 320g
Environmental Requirements
Humidity below 85% ï¼?; Temp.:-10â??-40â??
Standard Configuration:
Product Description Specification Quantity
Manual fiber stripper JX-220/220A 1
Power adaptor AC220/DC122A 1
8-core fixture 1
Manual 1
JX-550 specifications:
Applicable fiber: Single-core silica optical fiber
Applicable fiber coating layer diameter: 0.25 0.9 2.0 3.0 3 2
Applicable bare fiber diameter: 125m
Cleaved fiber length: 5~16mm(0.25)10~16mm(0.9)
Dimension: 105mm(W)70mm(D) 50mm(H)
Weight: 285g
Cleave angle: 0.7
Blade life: 60000 times
Applicable fiber:Single-core silica optical fiber
Applicable fiber coating diameter: 0.25 0.9 2.0 3.03 2 rubber insulated fiber
Applicable bare fiber diameter:125um
Cleaved fiber length:5~16mm(0.25)10~16mm(0.9)
Cleaving angle:0.7
Blade life:60,000 times
Dimensions:107mm (W) 94mm (D) 50mm (H)
Weight:315g
Product Description: Single-core optical fiber aligner
Model: JX-160A
The main features
1) Adopt high-quality guide rail, precision-class ceramic V-groove and head, low splice loss, and good consistency.
2) small size, light weight, easy to operate.
The main technical indicators:
Applicable fiber: 250 m and 900 m fibers;
clad-fiber diameter: 125 m;
Splice loss: For 160A, splice loss is not more than 0.05dB; for 160F, splice loss not more than 0.03dB
Working temperature: -10 ~ 40
Dimensions: 120mm 75mm 62mm
Weight:480g(fixture is not included)
Configuration list:
Description Model Quantity
Single-core optical fiber aligner 160A 1
Matching fluid 10ML 1
Single-core fixture 250-R/250-L 2
Model:JX-550
Specifications:
Applicable fiber Single-core silica optical fiber
Applicable fiber Coating layer diameter: 0.25 0.9 2.0 3.0 3 2
Applicable bare fiber diameter 125 m
Cleaved fiber length 5~16mm(0.25)10~16mm(0.9)
Dimension 105mm(W) 70mm(D) 50mm(H)
Weight 285g
Cleave angle 0.7
Blade life 60000 times
Applicable Fiber Diameter: 125um
Applicable Cable Diameter: 250um , 900 um
Fiber Counts: Single
Stripped Length: 35.0mm
Temp. Setting Step: 4 Steps
Strip Temperature(HEATING TYPE): 80 C~110 C(Adjustable every10 C )
Dimensions: 92.5(L)x 46(D) x 31.5(H) mm
Weight: 260g
Environmental requirements: Humidity below 85% %
Cable Slitter for Armored& Heavy-Duty Cable~KJ-01
Overview
Professional-grade tool ideal for slitting the armor layer on fiber feeder, central tube & stranded loose tube fiber optic cables, as well as various other non-fiber armored cables
Versatile design features a guide wheel for stability to accurately slit the outer polyethylene jacket & armor in one step
Performs longitudinal slitting & circumferential (ringing) stripping on cable ends
Optional red guide wheel allows the ACS model to accommodate smaller cable diameters
Compatibility
Cable Access: End
Min. Cable Outer Diameter: 0.315 (8 mm)
Max. Cable Outer Diameter: 1.125 (28.6 mm)
Adjustable Blade Depth: Up to 0.22 (5.5 mm)
Cable Material: Armored Corrugated Copper, Armored Steel, Armored Aluminum
Specifications:
Guide Wheel: 37879
Guide Wheel Color Gold
Length: 5 (127 mm)
Weight: 10 oz(284g)
Replacement Blade Part#: 37884
Items Parameters
Splicing Type SM, MM, DS, NZDS
Splicing Loss 0.02dB(SM) 0.01dB(MM) 0.04dB(DS) 0.04dB(NZDS)
Return Loss >60dB
Splicing Mode Manual, Half Auto, Auto
Fiber Alignment Core to Core Alignment by PAS technology
Applicable Fiber Cable indoor and 0.25mm,0.9mm fiber, SOC connector(option)
Splicing Time 9s
Heat Time 30s Auto Heat
Cleaved Length 8 16mm
Fiber Image/ Magnification 300/150 times
View Display 4.3 inch digital high-quality LCD screen
Tension Test Standard 2N (option)
Heat Shrinkable Sleeve 60mm, 40mm and serials heat Shrinkable Sleeve
Battery Capacity 300 cycles splicing and heating, 3 hours charging time
( splicing and charging at same time)
Battery Life Cycling charge 300-500 times, easy to replace battery
Electrodes Life 3000 splicing, easy to replace electrodes
Power Source â?¤20W
Interface USB Convenient data download and software update
Construction Lighting Built in high brightness, wide range of lights, easy to
operate at night
Power supply Built in lithium battery 5200mAh 11.1V; external adapter,
input: AC100-240V, output: DC13.5V/4.5A
Operating Condition 0-5000m above sea level, Temperature: -10-60,
Humidity 0 95%RH (No dew)
Weight 1.7 KG (including battery)
Dimension (LxWxH) 150mm(L) 135mm(W) 142mm(H)
KF-066 Tool Kit Configuration List
S.N. Item Quantity
1 Three-Hole Fiber Optic Stripper 1
2 Visual Fault Locator 1
3 Fiber End Cleaning Pen 1
4 Hand-Held Optical Power Meter 1
5 Optical Fiber Cleaver 1
6 Scissors 1
7 Bag 1
JX-150 Specification:
Applicable fiber: single-core single-mode, multi-mode silica fiber;
fiber diameter: 125 m;
Splice loss: not more than 0.5dB (for the same single-mode fiber)
Operating temperature: -10 40
Dimensions: 92mm 60mm 28mm
Weight: 160g
Standard configuration:
Product Description Model Quantity
Single-core V slot JX-150 1 set
Matching liquid 1 bottle
JX-220 Main Technical Parameters
Features: This device has the function of stripping optical fiber
Stripped Length: Max 30mm
Heating Mode: Normal mode/Power-saving mode
Temperature Setting: Four types of temperature: 60,80,100,120
Fiber Clamped Mode: Serials of fixtures: FH-2,FH-4,FH-8,FH-12
Power Supply: DC 12V2A adopting the power adaptor
Dimensions: 117.5(L) X 46(D) X 28.5(H) mm
Weight: 320g
Environmental Requirements
Humidity: below 85%RH; Temp.:-10-40
JX-551 Specifications
Applicable optical fiber: Single-core silica optical fiber
Applicable optical fiber coating-layer diameter: 0.25 0.92.0 3.0 2 rubber
insulated wire
Applicable bare fiber diameter: 125m
Cleaved fiber length: 5~16mm (0.25) ,10~ 16 mm(0.9)
Waste fiber collecting method: Automatic fiber harvesting
Dimensions: 107mm (W) 94mm (D) 50mm (H)
Weight: 315g
Applicable cleaving angle 0.7
Blade service life 60000 times
KF-066 Tool Kit Configuration List
S.N. Item Quantity
1 Three-Hole Fiber Optic Stripper 1
2 Visual Fault Locator 1
3 Fiber End Cleaning Pen 1
4 Hand-Held Optical Power Meter 1
5 Optical Fiber Cleaver 1
6 Scissors 1
7 Bag 1
KF-066 Tool Kit Configuration List
S.N. Item Quantity
1 Three-Hole Fiber Optic Stripper 1
2 Visual Fault Locator 1
3 Fiber End Cleaning Pen 1
4 Hand-Held Optical Power Meter 1
5 Optical Fiber Cleaver 1
6 Scissors 1
7 Bag 1
Items Parameters
Splicing Type SM, MM, DS, NZDS
Splicing Loss 0.02dB(SM) 0.01dB(MM) 0.04dB(DS)0.04dB(NZDS)
Return Loss >60dB
Splicing Mode Manual, Half Auto, Auto
Fiber Alignment Core to Core Alignment by PAS technology
Applicable Fiber Cable indoor and 0.25mm,0.9mm fiber, SOC connector(option)
Splicing Time 9s
Heat Time 30s Auto Heat
Cleaved Length 8 16mm
Fiber Image/ Magnification 300/150 times
View Display 4.3 inch digital high-quality LCD screen
Tension Test Standard 2N (optional)
Heat Shrinkable Sleeve 60mm, 40mm and serials heat Shrinkable Sleeve
Battery Capacity 300 cycles splicing and heating, 3 hours charging time
( splicing and charging at same time)
Battery Life Cycling charge 300-500 times, easy to replace battery
Electrodes Life 3000 splicing, easy to replace electrodes
Power Source 20W
Interface USB Convenient data download and software update
Construction Lighting Built in high brightness, wide range of lights, easy to operate at night
Power supply Built in lithium battery 5200mAh 11.1V; external adapter,
input: AC100-240V, output: DC13.5V/4.5A
Operating Condition 0-5000m above sea level, Temperature: -10-60
Humidity 0 95%RH (No dew)
Weight 1.7 KG (including battery)
Dimension (LxWxH) 150mm(L) 135mm(W) 142mm(H)
Technical parameters:
Cladding of fiber diameter: 80 m-800 m
Coating of fiber diameter: 160 m-1000 m
Maximum stripped length: 35MM
Heating temperature: 80-120 C adjustable
Fiber stripping method manual
Holders Specialized holder (for fiber with different diameters, the holder is also required to be replaced )
Power source DC12V2A
Dimensions 148(L)x76(D) x 81(H) mm
Weight About 1KG
Environmental requirements Temperature
Cable Slitter for Armored& Heavy-Duty Cable~KJ-01
Overview
Professional-grade tool ideal for slitting the armor layer on fiber feeder, central tube & stranded loose tube fiber optic cables, as well as various other non-fiber armored cables
Versatile design features a guide wheel for stability to accurately slit the outer polyethylene jacket & armor in one step
Performs longitudinal slitting & circumferential (ringing) stripping on cable ends
Optional red guide wheel allows the ACS model to accommodate smaller cable diameters
Compatibility
Cable Access: End
Min. Cable Outer Diameter: 0.315 (8 mm)
Max. Cable Outer Diameter: 1.125 (28.6 mm)
Adjustable Blade Depth: Up to 0.22 (5.5 mm)
Cable Material: Armored Corrugated Copper, Armored Steel, Armored Aluminum
Specifications:
Guide Wheel: 37879
Guide Wheel Color Gold
Length: 5 (127 mm)
Weight: 10 oz(284g)
Replacement Blade Part#: 37884
JX-270MT Specifications:
Adaptor Input AC 100V ~ 240 V (50 ~60 ) Hz
Output DC 12 V, 2A
Power DC12V, 15W
Applicable Fiber Diameter 125�µm
Applicable Cable Diameter 250�µm , 900 �µm
Fiber quantity Single core to 12 fibers
Stripped Length 32.0mm
Heating Time 2s.4s .6s.8s.
Temp. Setting Step 4 Steps
Stripping Temperature
(HEATING TYPE) 80�°C~110�°C
(Adjustable every10�°C )
Stripped Tensile Strength 4 Kg
Dimension 165(L) X 58(D) X 71(H) mm
Weight 750g
Environmental requirements Humidity below 65% %
