Main Feature and Technical Parameter
Transmission section closed under the operation section, therefore, it is safety and reliable without pollution.
Filling and sealing section mounted inside a visible static-free cover. It is easy to view, operate and maintenance.
PLC control and man-machine conversation interface;
Soft tube is fed automatically by the feeding rail;
Accurate detector and stepper motor is employed by the photoelectric focusing system to control the symbol set correctly and precisely.
As soon as one filling is completed, scrap at the end of soft tube is blown o by the air automatically;
No filling if there is no tube available;
The manipulator is flexible with multi-regulating function and with bi-edge, tri-edge and saddle-shaped edge folding function;
Code printing section print code automatically at the required position;
Alarming when failure occurs or no tube is available, machine stops automatically when the door is open or it is overloaded;
Machine stop automatically at the certain amount
set by the operator;
Production capacity: 30-60 pcs/min
Filling capacity: 3-80ml/pc
Filling error: f_?0.5%;
Main motor power: 1.1Kw
Working air pressure:0.40-0.50Mpa
Air displacement: less than 600L/min.
Dimension: 1950?750?1850mm
Weight: 700kg.
It is a kind of equipment integrating elegance, high efficiency, energy-saving, safety, easy to clean, which is applied for coating traditional Chinese and Western tablets and pills, including the micro pills and granulated pills, small pills, water pills, drip and granulated pills, with sugar, organic film, water soluble, film, slow and controlled release film in the fields of pharmacy, food and biology etc. The machine is equipped with the programmable PLC(machine and person interface), with which its operation process and process parameters such as negative pressure and temperature can be automatically controlled. Itf+s easy to operate, with reasonable and advanced process during run of the machine.Main machine, cleaning system, hot air cabinet, exhaust cabinet and the thermostatic mixing drum are all made of imported high quality, stainless steel, which conforms to GMP requirements.The tablets make complicated and constant track movement with easy and smooth turning and frequent exchanging in a clean and closed drum of the film coating machine. The coating mediums stirred in the constant temperature-stirring drum are prayed on tablets through the spray gun at the inlet under the action of crawler pump. Meanwhile, the hot air up to 100,000 level filtration is inhaled through the air-distributing pipe at the center of the drum and flowed through tablets around the fan blade. Under the action of air exhausted and negative pressure, hot air are exhausted from another side of the air-distributing pipe and discharged after dust abatement. So these coating mediums on the surface of tablets get dry quickly, forming a coat of film, fine and smooth film. Automatically controlled by PLC, itf+s in normal operation.
Novel material that that machine is an extensive application is in the system medicine, chemical engineering food, metallurgy, work and section unit etc. the profession inside mix with the machine.Can very and evenly mix with material that the material of the mobility good powder or grain, make the admixture empress attain the best quality.
Work principle
That machine while working, because of the admixture bucket material specific weight for having in many ways facing revolving acting, making the every kind of material in the admixture process, accelerating the fluxion with function, at the same time avoiding generally mix withing the machine because leaving the mental exertion producing with accumulate phenomenon, and also have no the dead angle, and guarantee mix with even.
Construction
That machine is from the machine, spread to move the system, electric appliances the control the system, many directions to exercise the organization, and mix with the bucket to wait the parts to constitute.With the high-quality stainless steel material of the admixture adoption of the direct of material manufacturing, bucket the outside of inside is all through light.
Characteristics
1, because of the sport for having many directions of admixture bucket, make a material in mix with the point many, mix with effective, degree of homogeneity can reach over 99.9%, maximum volume come up to 90%, mixing time is short, and the efficiency is high.( common mix with the machine is only 40%)
2, that machine mix with the bucket the type of figure the design to is special, bucket inside pass by fine light, have no the dead angle, not contaminative material, and also hour material is under from living the function, smooth out, not stay the surplus, and have not contaminative, easy out , not accumulate to easily wash to wait the
characteristics. Arrive the GMP standard..
The technique of supercritical fluid extraction(SCFE or SFE) is of a new type environmental and sustainable extracting
technique with wide adaptability, which is popular in the modern world. With this technique, no chemical agent is
needed during the process of extraction. No pollution is done to the separated substances. Thus it fully meets the GREEN requirement of mankind to food, medicine, health protection goods and cosmetics. Also, this technique boasts the feature of high extraction effect, high quality, low extraction temperature, low energy consumption and without pollution, especially suitable for the extraction of heat-sensitive and active substances. This device can be
widely used in volatile oil, alkaloid, phenol and other medical elements extractions from animals and
plants.
Wenzhou Chengdong Pharmaceutical Machinery Co., Ltd combined with the technical advantages of Chemical Department of Zhejiang Universityf+s achievement and our own manufacturing experience in high-pressure equipments, the supercritical fluid extraction device was designed. It is of the first class extraction technique home and broad at present.
Main Technical Data:
1. The extraction pressure can reach as high as 40Mpa. Extraction, separating and distillation temperature (indoor) can reach 80oC. The above mentioned data can be adjusted by the user.
2. Designed with one(1-24L) or several extraction pots (24-1000L) and separating pots integration.
3. Extraction and separating pots are of compact structure, easy to use, convenient to load and unload raw materials, with a strong anti-fatigue capability and safe in use. It can be made according to the customerf+s need. Large equipment are fitted with safety chain device.
4. Sample can be obtained on line during operation and the extracted fluid sample can be analyzed to determine the elements content. CO2 can be used calculatedly and its flow volume can be indicated by flow meter.
5. Temperature in different section is show by digital or meter control system, which is easy to operate and control. Pressure double safety-guard device are formed with safety valves and anti-explosion pieces. Computer control system can be provided if necessary.
6. The whole equipment is made of stainless steel, attractive and durable. It is the ideal equipment for food and pharmaceutical industry. The technique of making some relevant agent will also be attached.
1.Quickly eliminate tiredness and recovery.
2.Improve the cellular ability of carrying oxygen, preventing you from insomnia & being nervous.
3.Stretching collateral channels and improve the blood cycle, so as to promote metabolism and add ability of regeneration.
4.Improve immunity ability and defend against sub-health.
5.The product can imitate professional massage to massage of automatic sequence, with high and low speed. In the massager's field, it is a new discovery more. can massage each part of your body.
