Sodium chlorate is an inorganic compound with the chemical formula NaClO3. It is a white crystalline powder that is readily soluble in water. It is hygroscopic. It decomposes above 300 C to release oxygen and leaves sodium chloride. Several hundred million tons are produced annually, mainly for applications in bleaching pulp to produce high brightness paper.
The main commercial use for sodium chlorate is for making chlorine dioxide (ClO2). The largest application of ClO2, which accounts for about 95% of the use of chlorate, is in bleaching of pulp. All other, less important chlorates are derived from sodium chlorate, usually by salt metathesis with the corresponding chloride. All perchlorate compounds are produced industrially by the oxidation of solutions of sodium chlorate by electrolysis.
Lead, Zinc Ore from Nigeria
The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D.
Equipment Technical Data
Titer Range dtex 6.67-16.67
Spinning Pos. nos. 6-24
Spinning Pitch mm 700, 750
Plant Capacity TPD 15-80
Spinneret dia. mm 328, 358, 410
Spinning Mechanical Speed m/min 500-1,500
Spinning Processing Speed m/min 500-1,300
Stretching Mechanical Speed m/min 240
Stretching Processing Speed m/min 230
Total Tow Titer at Stretching dtex 600,000-3,000,000
Stuffer Box Width mm 160-410
Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101
Bale Weight kg 200-350
Application:
Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well.
Spinning Line: Continuous Dryer Hopper Screw Extruder Polymer Pipe Filter Spin Beam (Meter Pump System, Spin Pack, Spinneret) Quenching Unit Interfloor Duct Draw-off Wall Capstan Roller Sunflower Gearing Unit Automatic Fiber Can Device
Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press
Spodumene, lithium ore, lithium concentrate content Li2O 5-8% or more
Long-term supply of spodumene ore and lithium concentrate, with different contents of 5%, 6%, and 7% or more can be supplied.
It can supply about 1000-2000 tons per month. Interested ceramic glass factories or traders are welcome to contact us.
Li2O: 6.00%,
Al2O3: 25.56%,
SiO2: 63.72%,
Fe2O3: 0.26%
CaO: 0.17%
This type Chips that is designed to resist burning and melting at low temperatures.
Low Melting Point Polyester Chip for Hot Melt Yarn Masterbatch
Extrusion Grade Polymer for Hot-melt Adhesive Glue Coating
Description:
Generally speaking, the low melting point polyester chip refers to one specialty polymer with a melting point between 90 and 220.
The melting point of polyester is the temperature at which a solid crystalline substance changes from a solid state to a liquid. So it reflects the purity of polyester. Generally speaking, pure polyester is a partially crystalline polymer with a melting point of 265. But during actual production, some impurities exist in the polyester due to various side reactions. At the same time, the defects of polymer crystals and the difference in crystallinity will also affect the melting point. The common type of low melt polymer is 110. But we can also offer a melting point of 90, 120, 160, and 180.
Application:
Low-melt polyester chips can produce low-melting point fiber, low-melting point synthetic fiber, and thermal-melting mucilage. Its primary usage is acting as bonding fiber in nonwoven fabrics. The end usage lies in clothing, articles for bed, shoe uppers, sleeping bags, sofas, and hygiene products.
LM PET Chip is also the main raw material of masterbatch carriers. That is, low-melt PET chips, conventional chips, and dyes are mixed to produce the polyester color masterbatch according to a certain proportion. The production of this product is the introduction of polyester macromolecules into the modified copolymer unit. And its melting point is in the range of 100-120. Commonly used modifiers are phthalic acid, adipic acid, and trimethylolpropane.
Recently, LM Polymer is also extruded into the back coating of nonwoven, automotive interiors, foam, injection molding, PET sheets, and hot-melt adhesive/glue.
Low Melt Yarn is also called hot melt yarn or fusible yarn. There are sheath-core low-melt bicomponent yarn and full low-melt polyester yarn.
What is pe/pp bicomponent fiber?
PE/PP bicomponent fiber is a type of synthetic fiber that is made up of two different polymers, polyethylene (PE) and polypropylene (PP), which are combined in a single filament.
What are the advantages of using PE/PP bicomponent fiber in textiles?
PE/PP bicomponent fiber offers several advantages in textiles, including improved strength, durability, and moisture management. It also provides a softer feel and can be used in a variety of applications, such as sportswear, outdoor apparel, and home textiles.
What are some common uses of PE/PP bicomponent fiber in the textile industry?
PE/PP bicomponent fibers have several advantages that make them popular in the textile industry. Some of these advantages include:
Improved Strength: PE/PP bicomponent fibers have a higher tensile strength than regular fibers, making them ideal for use in high-stress applications.
Enhanced Durability: These fibers are resistant to wear and tear, making them ideal for use in products that need to withstand daily use.
Improved Comfort: PE/PP bicomponent fibers have a soft texture, which makes them comfortable to wear against the skin.
Moisture Management: These fibers are hydrophobic, which means they repel water and moisture. This property makes them ideal for use in products that need to stay dry.
Some common uses of PE/PP bicomponent fiber in the textile industry include:
Clothing: These fibers are often used in the production of sportswear, outdoor clothing, and other products that require enhanced durability and moisture management.
Home Textiles: PE/PP bicomponent fibers are used in the production of carpets, curtains, and other home textiles that require enhanced strength and durability.
Nonwoven Fabrics: These fibers are used in the production of nonwoven fabrics, which are used in a wide range of applications, including medical products, hygiene products, and filtration materials.
Overall, PE/PP bicomponent fibers offer several advantages that make them a popular choice in the textile industry for a wide range of applications.
What is PET Open Agent Film Chips?
PET Open Agent Film Chips are plastic chips made of polyethylene terephthalate (PET) that contain an open agent, which helps to improve the adhesion of inks and coatings to the surface of the film.
It is uniformly depressed anti-adhesive, with excellent film-forming properties; polymerization of continuous device production makes the quality high and stable.
As an opening agent to be used with film grade base materials to produce various types of films.
It can be used in films with special requirement for optical and surface properties or ultra-films below 8u.
Can be used directly in foodstuffs after FDA approval.
PET FLAKES
The Recycling PET (Polyethylene Terephthalate) Flake is obtained from post-consumption of Recycling PET Plastics Bottles recycling. Strong material with light weight. The flake is processed by blowing, injection, and extrusion.
SPECIFICATION:
GRADE AA (B to B flakes)
PVC CONTENT: less 0.005% (50ppm)
OTHER IMPURITY: less 0.01% (100ppm)
GLUE RESIDUE/GLUE: less 0.02% (200ppm)
GRADE A: (Sheet or Filament Grade)
PVC CONTENT: less 0.01% (100ppm)
OTHER IMPURITY: less 0.02% (200ppm)
GLUE RESIDUE/GLUE: less 0.02% (200ppm)
COLOR: CLEAR / NATURAL
PURPOSE: For the raw material in many industries : Recycled PSF/Fiber, Strapping Band, Sheet, Bottle
PACKAGING
Jumbo bag
LOADING
20 ton/40" container
PRODUCTION CAPACITY
500 metric ton per month
PET FLAKES
The Recycling PET (Polyethylene Terephthalate) Flake is obtained from post-consumption of Recycling PET Plastics Bottles recycling. Strong material with light weight. The flake is processed by blowing, injection, and extrusion.
SPECIFICATION:
GRADE AA
PVC CONTENT: 0.005% (50ppm)
OTHER IMPURITY: 0.01% (100ppm)
GLUE RESIDUE/GLUE: 0.02% (200ppm)
GRADE A:
PVC CONTENT:0.01% (100ppm)
OTHER IMPURITY: 0.02% (200ppm)
GLUE RESIDUE/GLUE:0.02% (200ppm)
COLOR: CLEAR / NATURAL
PURPOSE: For the raw material in many industries : Recycled PSF/Fiber, Strapping Band, Sheet, Bottle
PACKAGING
Jumbo bag
LOADING
20 ton/40" container
PRODUCTION CAPACITY
500 metric ton per month
What is PET Open Agent Film Chips?
PET Open Agent Film Chips are plastic chips made of polyethylene terephthalate (PET) that contain an open agent, which helps to improve the adhesion of inks and coatings to the surface of the film.
It is uniformly depressed anti-adhesive, with excellent film-forming properties; polymerization of continuous device production makes the quality high and stable.
As an opening agent to be used with film grade base materials to produce various types of films.
It can be used in films with special requirement for optical and surface properties or ultra-films below 8u.
Can be used directly in foodstuffs after FDA approval.
The main raw material of PTA and MEG is added with modifiers of third monomer and fourth monomer, etc., then subjected to copolymerization reaction to make modified polyester pellet with melting point at 100'C - 225C.
Functional characteristics low melting point, good spinnability and excellent fiber adhesion effect
Application scope manufacturing bi-component core-sheath fiber and filament yarns, etc.
Specification - LOW MELTING PET CHIPS TRB FIBER GRADE 110-225.
Advantages: It is uniformly depressed anti-adhesive, with excellent film-forming properties; Polymerization of continuous device production makes the quality high and stable.
Application: It can be used in films with special requirements for optical and surface properties or ultra- films below 81/4m (micrometer ). It can be used directly in the food packing materials after FDA approval.
For the production of thin film and solar cell encapsulation substrates with high strength requirement
The solar polyester film can protect the solar panel.
PVC is one of the most commonly used materials today, and it is an indispensable material in industries. In addition, PVC is also used to replace some other materials to reduce costs.
PVC has very poor strength, so in order to increase the impact resistance as well as ensure the durability of the product, people often add additives such as ABS, MBS .... toughness, plasticizers. PVC is the third most produced and consumed PVC in the world after PE and PP.
Original Product PVC Recycled Powder
Type Factory Waste
Application PVC Recycled Pipe, Window, Board,...
Supply Ability 100 Metric Tons per Month
Processing Time 15 - 20 days
Packaging Jumbo Bag
High Tenacity or Medium Tenacity Recycle Polyester Staple Fiber (white or black fiber)
(Nearing to Virgin fiber)
Commonly used as a binder fibre in core-sheath constructions, our Polyester Low Melt LMF (CoPET/PET) fibre bonds to other polyester fibres to produce wadding, insulation, filtration, automotive, and other products where heat is used to bond the fibres. This fibre is normally blended with solid polyester fibres or recycled materials.
Fibre Fill Polyester Filling Microfiber Fiber 0.9d Down Like Virgin Micro Gel Fiber
Hot Sale Virgin Down Like Polyester Fiber
filling fiber hollow conjugated fibers recycled polyester stuffing fiber
1) Denier:0.8D-1.5D
2) Cut length:22MM/25MM/32MM/38MM/51MM/64MM/71MM/76MM
3) Luster:raw white Virgin and recycled grade
4) Siliconized and no siliconized
5) Merits: high intension, stable stretch elongation, highly elastic, puffed, high ratio of hollowness
6)Excellent fluffy performance, pleasing hand feeling, plump, gentle, luster
7) Usage: suitable for filling toys, pillows, cushions, and other products need to be filled ; make pearl cotton. bedclothes , man-made fur, filler materials, sofa and others
8) Weight: around 300kgs/bale
9) Package: woven bag Container load: around 34 bales for a 20GP,around80 balesfor a 40HQ
10) Delivery Time: within 15 days after receiving the deposit
Specification: 3-110D * cutting length 5~102mm, color can be according to customer`s requirement.
Our products can be used in non-woven, automotive interiors, geo-textiles, speaker cloth and needle carpet, spinning wool, filters, adsorption materials.
Our fiber also can be added flame retardant, anti-UV, anti-aging properties according to the customer's requirement.
virgin polyester staple fiber 1.2-1.4d 38mm psf fiber
Application:
1. yarn spinning, open end spinning and ring spinning, sock yarn, mop yarn
2. needle punch nonwoven, for geotextile, automotive interior, exhibition carpet, trunk nonwoven, insulation panels.
Making wadding and padding materials 7D*64mm HC non silicon polyester staple fiber white color
054310599
Our siliconized fiber mainly can be used in home textile, such as filling sofa, pillow, cushion and winter clothing and non siliconized mainly can be used in non woven fabrics, such as padding, mattress and wadding.
Regenerated 1.4D 1.5D 3D 6D 7D 15D Black Polyester Staple Fiber for Nonwoven Carpet
-Textile yarns.the end products are clothing, home textiles, decorative cloth, etc.
-Nonwoven. the end products are wet wipes, masks, etc.
-Filling.the end products are winter clothes, pillows, toys,etc.
New-type hot-connectivity composite fiber is made from different types of modified high molecular materials through advanced composite spining technology. It has unique characteristic of melting at low temperature, and after hot treatment, it can naturally adhere without use of binder, green and environmental. The product abides by strict sanitation control standards to achieve sanitation material grade. The products include ES fiber and ETS modified polyester composite staple fiber which is initiated by the company, and can be applied to production of surface layer and guide layer of disposable sanitary articles
Functional characteristic
the product is a kind of chemical blend provided with advantages of the two materials. ES fiber has low melting point on the superficial layer, soft, bouffant and pervious, while the core layer has certain intensity and fiber state. ETS fiber is provided with advantages of heat bonding, high hygroscopicity and antistatic property, etc.
Application scope
the sanitary products are applicable to hot air penetrating technology to produce surface layer and guide layer of disposable sanitary materials such as paper diaper and sanitary towel; the conventional low-melting fiber is applicable to production of hard cotton, decorative wall board, environmental mattress, seat mat, environmental filter media, constructional acoustic damping and heat insulation materials, etc.
Specification 4D*51MMã??4D*32MM
100% Polyester 30S/1 Ring Spun Yarn Raw White Polyester Yarn
Material: 100% Polyester, 100% Polyetser
Pattern: Raw white
Technics: RING SPUN
Yarn Type: Spun
Feature: High Tenacity
Use: Weaving, Knitting, Sewing
Twist: Standard
Evenness: Excellent
Yarn Count: 30S/1
Place of Origin: IRAN
Samples: free
Package: yarns on cone
Flame Retardant Resistant Aramid Staple Fiber,
Kevlar Staple Fiber, Aramid Thread or Staple Fiber
3mm 6mm 100% Virgin New PP Material Staple Monofilament Polypropylene Fiber
0086-13915721168
Product number: PP Micro fiber
Equivalent diameter: 15-48 um
Elastic Modulus: â?¥3500 M�·pa
Breaking strength: â?¥ 560 M�·Pa
melting point: 160-180�°C
proportion: 0.91-0.93 g/cm�³
length: 3-20mm (as custom requirement)
Acid and alkali resistance (strong retention rate) â?¥96%
1. PP pressed Woven Bag
2. 300-350kg/ bale
3. About 9-10Tons / 20'FCL
4. About 21-22Tons / 40'FCL
ES fiber is a sheath-core composite fiber obtained by successfully combining low-melting components and high-melting components on a single fiber.
It has excellent thermal bonding properties. The low melting point component in ES fiber melts under heat treatment conditions higher than its melting point, and bond with other materials to form a binder-free environmentally and friendly non-woven fabric.
ES fiber has various advantages such as soft, fluffy, low-temperature processing, heat-bonding, plasticity, non-toxic, non-irritating, and lightweight. It is mainly used to manufacture high-quality sanitary products such as sanitary napkins and diapers. And it is also high-quality materials used to make medical products such as medical protective cloth and medical protective masks, and so on.
There are two main types of ES fibers. The first kind is a composite of PE and PP. Its sheath layer is PE (polyethylene, melting point 130�°C), and its core layer is PP (polypropylene, melting point 165�°C).
The second kind is a composite of PE and PE. Its sheath layer is PE, and the core layer is PET (polyester, melting point 255â??), which is an upgraded version of PE/PP.
ES is divided into EP and ET in terms of material and functionally divided into the hydrophilic, water-repellent, hydrophilic, and weak parent, single parent, multi-parent.In addition, it also can be divided into whitening, general whitening, high holding, medium holding, and low holding. The specifications are 1.5D38mm, 2D38mm, 4D51mm, and so on. In the future, the trend will gradually develop towards fine deniers.
SPECIFICATION:
PE+PET ES Fiber:
Optical White & Super Hydrophile 2D*38mm,
Optical White & Hydrophile 2D*38mmï¼?
Optical White & Water Repellency 2D*38mmï¼?
RAW White & Water Repellency 2D*38mmï¼?
Optical White & Super Hydrophile 1.5D*38mmï¼?
Optical White & Water Repellency 1.5D*38mmï¼?
RAW White & Water Repellency 1.5D*38mï¼?
Hydrophile 2D*38mmï¼?
Water Repellency 2D*38mm
PE+PP ES Fiber: Hydrophile (P2Q) 2D*38mm
Bleached Softwood Pulp is commonly used in the production of most paper, paperboard and tissue products. Softwood pulp brings strength to the end product, as well as runnability and excellent dewatering properties to the production process.
