Garnet is a natural product with chemically inert, non-toxic metals and crystalline silica. With its good hardness, garnet has been used as a gemstone and blasting abrasives.
Features:
Low Dust: The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area.
Excellent Surface Quality: It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not adversely dimples and pits, easy access to 50-70 microns surface roughness.
Recyclable: Its excellent tenacity and lower brittleness can lower damage rates and higher productivity. Depending on the specific application, it can be reused up to 3 times.
Lower Production Costs: The paintâ??s adhesion and corrosion resistance depending on the cleanliness and surface roughness of the base material. Using garnet abrasive can greatly save the amount of paint by completely eliminate adverse spurs and pits.
Improve Health and Safety: Its non-toxic characteristics can greatly reducing silicosis, leaching of metals or radioactive contamination risks.
Application:
1. Blasting abrasives: Derusting of steel structure, hull, Bridges;
2. Water jet cutting: Cutting metal, stone, glass;
3. Grinding media: Grinding marble, optical lens, glass, leather and other materials;
4. Filter medium of chemical, petroleum, pharmacy, water treatment;
5. Coated abrasives of grinding wheel, emery cloth, sandpaper;
6. Wear-resistant materials: Used in highway pavement, airport runway, prevent slippery, wear-resisting rubber paint.
Product Feature:
Taa Metal Blast Abrasive Low Carbon Steel Shot Ball S460
a. High strengthen, high tenacity, long service life.
b. Low breakage, low dust, low pollution.
c. Low wear of the equipment, long life of accessory.
d. Reduce dedusting system load, lengthen usage time of dedusting equipment.
Product Application
Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Shot peening: Shot peening of gear, heat treated parts.
Shot blasting: Shot blasting of profile steel, ship board, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure before painting or coating.
Stainless steel cut wire shot with a bright surface that is used for shot blasting, shot peering and deburring in non-ferrous metal and stainless steel products surface. The surface of work-pieces are smooth, no rust and highlight metallic luster after process.
Materials SUS304, SUS430, SUS410, SUS201 etc
Sizes: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm
Shapes:
Cut wire
G1 conditioned: Small cylinders
G2 conditioned: Nearly round particle
G3 conditioned: Round particle
Shot Peening : Steel shots are used in shot peening, which is used to make stronger and reduce stress in machinery like turbines, steel automobile crankshafts, springs, gears, torsion bars, shafts and connecting rods.
Surface Preparation: Steel shots are used in support of coatings, such as powder coating, enameling, painting, metallization, rubber bonding and moreâ?¦
Sand Removal: Steel shots can be used in cleaning of castings.
Scale Removal: Steel shots can also be used to clean ferrous or non-ferrous alloys or products (pipes, plates etc.) that are made from forging, die-forging, stamping, drawing and rolling or after heat treatment.
Shot Blasting of Cast Steel: Steel shots can be used on the blasting of profile steel,shipboard,steel board and other steel material
Roughening and de-burring: Steel shots are used in the aesthetic treatment of some material. It is also used to remove the burrs that might arise during injection moulding of metallic products.
Steel Grit is manufactured from high carbon steel shot which is crushed to angular shape by special roll mill and subsequently tempered to different hardness grades (GH, GL & GP) for different blasting applications. Finally, each hardness grades are screened to different abrasive mixes.
Sharp Angular shape and relative hardness of Steel Grit leads to high cleaning rates and recyclability hence, it is an excellent abrasive for blasting operation in closed environment such as blast room and open blasting. Industry application of steel grit as blasting media includes descaling of steel structures, granite cutting, and surface roughness before blasting and painting.� Steel Grit can be recycling a number of times.
Product Application:
Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Shot peening: Shot peening of gear, heat treated parts.
Shot blasting: Shot blasting of profile steel, shipboard, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure before painting or coating.
Low carbon steel shot---our patent product
Ideal for use to provide a clean, polished metal surface.
Used in both turbine and compressed air blasting systems. Low carbon steel shots ensure lower turbine blades wear.
Low carbon steel shots' life cycle is about 30%-50% longer than common steel shots. Shot blasting process produces less dust, which results in lower maintenance costs of filtration system.
Product Feature:
a. High strengthen, high tenacity, long service life.
b. Low breakage, low dust, low pollution.
c. Low wear of the equipment, long life of accessory.
d. Reduce dedusting system load, lengthen usage time of dedusting equipment.
