Properties
Flash point, Co
Distillation: 50% recovered, Co
90% recovered, Co
95% recovered, Co
Kinematic Viscosity at (40 Co), mm2/s
Ash, %mass
Aromatic Content, Vol %
Sulfur Content, %mass
Copper Strip Corrosion Rating
(3h at a minimum control temperature)
Cetane Index
Cloud Point, Co
Ramsbottom Carbon Residue on 10% Distillation Residue, %mass
Colour
Water, %mass
Density (15 Co), kg/m3 Lubricity HFRR@ 600 C, micron
Specification
Min 57
Max 300 Max 355 Max 370
1.9 - 4.1
Max 0.01 Max 35
Max 0.05
Max No. 1
Min 45
Max 12
Max 0.3
Max 3.0 Max 0.05
Report Max 520
Test Method
ASTM D93 OK
ASTM D86 OK
ASTM D445 OK ASTM D7042
ASTM D482 OK
ASTM D1319
ASTM D2622 ASTM D5453 OK
ASTM D130 OK
ASTM D976 ASTM D4737
ASTM D2500 ASTM D524 OK
ASTM D1500 OK ASTM D95
ASTM D1298 OK ASTM D4052 OK
ASTM D6079 O
Cetane Number, min.
Cetane Index, min.
Density at 15�°C, kg/m'
Polycyclic aromatic hydrocarbons, wt. %, max.
Sulphur, wt. %, mg/kg, max, for fuel K5
Flash Point in closed cup, �°C, higher than
CCR of 10 % residue, wt. %, max.
Ash, wt. %, max.
Water, wt. %, mg/kg, max.
Total impurities, mg/kg, max.
Copper corrosion test (3 hours at 50�°C), scale unit
Oxidation stability: total residues, g/m', max
Lubricating property:
normalized wear scar diameter (wsd 1,4) at 60�°C, um, max.
Kinematic viscosity at 40�°C, mm'/ Distillation:
at 250�°C, vol.%, less than at 350�°C, vol.%, min.
95% (vol.) distilled at temperature, �°C, not higher than
Cold filter plugging point, �°C, not higher than
51
8
10
55
460
360
Specified Value
TU 38.101567-2014
11.4
61
minus 10
1.0 (Il type)
1.5 (III type)
0.025
traces
0.2
absence
0.01
0.02
890
20
Specified value
GOST 32511-2013
(EH 590:2009)
51.0
46.0
820.0 - 845.0
8.0
10.0
55
0.3
0.01
200
24
Class 1
25
460
2.000 - 4.500
65
85
360
minus 5
Kinematic viscosity at 20C, mm?/, max:
Flash point in closed cup,
C, min.
Pour point, C, not higher than
Sulphur, wt. %, max.
61
1.5
5
6
7
10
11
12
Mercaptan sulphur, wt. %, max.
Water, wt. %
Carbon content, %, max.
Water soluble acids and alkalis
Ash, %, max.
Sediments, wt. %, max.
Density at 20C, kg/m', max.
lodine number, g of iodine/100 g of fuel, max.
10 % distillated at temperature, C, not lower than
90 % distillated at temperature, "C, not higher than
Kinematic viscosity at 20C, mm?, max.
Pour point, C, not higher than
during the period from 1 September to 1 April during the period from 1 April to 1 September
Flash Point in closed cup, C, min.
Sulphur, wt. %, max.
IV type
V type
Hydrogen sulfide
Copper corrosion test
Water soluble acids and alkalis
Acidity, mg KOH/100 cm�° of fuel, max.
Ash, %, max.
CCR of 10% residue, %, max.
Water, wt. %
Sediments, wt. %
Color
Density at 20C, kg/m'
Density at 15C, kg/m'
Start of production: 2005
Specified Value
160
360
8.00
minus 15
minus 5
45
0.5
1.1
absence passed testing
absence
5.00
0.02
0.35
traces absence from colorless to black color not specified not specified
