Akfix HM 788 is a synthetic resin and EVA based hot melt adhesive of thermoplastic characteristic that gives perfect results with straight edge banding works where lower softening point and fast bonding is needed.
Akfix C900 is polyester injection mortar for general purpose for solid and hollow supports having a short cure time. It is suitable for use in concrete, perforated bricks and cavity blocks in a wide range of applications.
Suitable for solid and hollow structures.
High solid content.
Easy to extrude and to inject.
Thixotropic, can be applied in vertical and horizontal direction.
Fast curing.
Construction PU Sealant is a one-component, low-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to all typical construction materials such as cement based materials, brick, ceramic, glass, wood, galvanized and painted sheet iron and various plastics.
Possesses permanent elasticity.
25 % movement capability.
No surface tackiness after full cure.
Do not pick up dirt.
No shrinkage.
Cures bubble-free.
Enhanced storage stability.
No sagging Thixotropic.
Can be applied with hand gun and tooled easily.
Paintable.
Akfix 805 is a single-component, moisture-curing and self-expanding aerosol polyurethane foam. It is designed for easy dispensing through the straw adapter included with each can. It does not contain any propellant gases that are harmful to the ozone layer.
Excellent adhesion & filling capacity and high thermal & acoustical insulation value.
Excellent mounting capacity and stability.
Adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon, silicone and surfaces contaminated with oils and greases, mold release agents and similar materials.
Mould-proof, water-proof, over paintable.
Cured foam dries rigid and can be trimmed, shaped and sanded.
Thermcoat Thermal & Acoustic Insulation Pu Spray Foam (Gun Use)
A PU Foam for top quality heat and sound insulation at buildings and houses. Provides a unique, monolithic thermal insulation application without junctures, seams and gaps. An innovative alternative to traditional building insulation methods such as polystyrene heat insulation boards, glass wool and rock wool. Single-component product used with an applicator gun. It does not contain any propellant gases which are harmful to the ozone layer.
Excellent adhesion to all kind of building materials,
Can be applied easily to uneven, hard to reach surfaces where it is not possible to use traditional insulation materials,
Excellent thermal insulation value (0.025 W/(m.K),
Elimination of thermal bridges,
Elimination of the dew point,
Yield up to 3meter with 1.5cm thickness for one layer if applied from a distance of ~40cm with normal application speed,
No need to use mechanical fastening elements after use,
Over paintable,
One-component, fast curing liquid polyurethane adhesive. It possesses high water resistance and bonding strength.
Fast curing.
Low press time.
Transparent.
Extremely high bond strength on numerous substrates.
Conforms to D4 according to DIN EN 204.
Easy to use.
Very good resistance to chemicals.
Excellent resistance to moisture and weather conditions.
Nonshrinking.
Low odour.
Useable in slightly wet substrates.
An adhesive set which consists of high viscosity cyanoacrylate adhesive and activator.
High bonding strength.
Suitable for use on vertical surfaces as it will not drip or slump.
It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface.
Akfix G400 is a two component marble and natural stone adhesive based on polyester resin.
Resistant to UV
Resistant to alkalis and diluted acid solutions
Temperature resistance of cured adhesive is between -10 C and +100 C
Bonded surfaces are ready to be used after 2 hours
No color change, cracking or shrinkage during hardening period
Polyurethane Windshield Adhesive is a component, moisture curing polyurethane based adhesive for direct glazing in Automotive Glass Replacement.
One component formulation
Good non-sag properties
Short cut-off string
Cold application
Fast curing â?? Rapid strength development
High mechanical performance
High Modulus
High initial bond strength
Can be overpainted
AKFIX 1044 is a very fast set, 2-component, 100% solid flexible coating derived from a reaction of an isocyanate prepolymer and an amine terminated resin blend. This general purpose aromatic pure polyurea has been especially designed to protect and coat concrete, metal, wood, ceramic, geotextile surfaces. The product reacts within seconds and once cured, leaves a flexible, durable, tough surface. Its extremely fast gel time makes it suitable for applications down to -20 �°C without special conditioning of the component resins and isocyanates. It is relatively moisture and temperature insensitive, allowing application in the most problematic ambient conditions. The material must be applied utilizing high pressure, heated plural component spray proportioning equipment.
%100 solid, VOC free, no solvents
No catalyst
Fast reactivity and fast return to service time
Seamless and joint-less coating
Little or no odor
Excellent thermal stability
Water resistant
Excellent adhesion on concrete, steel, aluminum, plastics, fibers, wood, foam etc.
Excellent flexibility
Non sensitivity to temperature and humidity
Excellent chemical resistance
Excellent impact and abrasion resistance
Anticorrosive
Very good tensile and structural strength
UV, chlorine and saltwater resistant
High application thickness possible
Variable application thickness possible
Broad color spectrum
Akfix 647FC is a one-component, high-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to sheet iron, aluminum, stainless steel, lead, copper, ceramic, wood etc.
Permanently flexible
Non-sag consistency - Exceptionally thixotropic
Non-sticky / does not pick up dirt
No change in volume
Easy to gun, can be easily smoothed
Over-paintable
905N a neutral cure, premium performance silicone sealant designed for gap filling and sealing in a wide range of use in building and construction. It combines the advantages of outstanding adhesion to building materials and non-corrosive and odorless
100% solventless silicone.
Excellent weatherproof and UV resistant.
No Cracking or Shrinking,Water resistant.
Very low odor and noncorrosive.
Excellent flexibility and adhesion to numerous porous and non-porous.
Substrates for large scale construction and glazing applications.
Resistant to temperature extremes (-60 C to +180 C)
Fast curing, low modulus, high elasticity.
High viscosity non slump formula.
100E Universal Silicone Sealant
100E is an one-component acetoxy cure silicone sealant for a range of general sealing and glazing applications. It provides a strong adhesion and suitable for use on common non-porous building materials.
Stays permenantly elastic after curing.
Remains flexible in low and high temperatures.
Resistant to temperature exteremes.
Resistance to aging, cracking and discoloring.
AS606 is one-component acrylic emulsion based sealant reinforced with silicone emulsion. It has superior adhesion and good elasticity.
Sealing of low movement joints between various construction materials(wood, concrete, brick etc.)
Sealing joints between windows, walls, doors etc.
Filling cracks in walls and on ceilings.
Spray Paint
Designed for numerous application possibilities. Special spray system, which is even used by famous graffiti artists. Available in a broad range of the bestselling colours, mainly matching to RAL.
High-grade nitro-combi quality.
Very good coverage.
Excellent adhesion on many surfaces.
Good flow, smooth surface.
Quickdrying.
Suitable for indoor and outdoor applications.
The surface is polishable.
Weather-resistant, light-proof, UV-resistant.
Scratch-, shock- and impact-resistant.
Quick-drying (The drying time depends on surrounding temperature, air humidity and thickness of the applied coat).
Pur 450 Pu Waterproofing Membrane
One part, easy to apply, specially formulated polyurethane based, elastic, crack bridging membrane. It cures to form a highly elastic, seamless, waterproof coating with excellent crack bridging properties. Its performance is maintained even at low temperatures.
Excellent Adhesion
Easy application
May be applied interior and exterior areas
Crack Bridging
Highly elastic
Economical in use
Silk/matt appearance
Root penetration resistant
Aqua Zero Hybrid Waterproofing Membrane
Aquazero; is a premium, liquid and cold applied, one-component silane modified polymer (SMP) based polymer, elastic, waterproofing membrane, free of bitumen, solvent and isocyanates. After fully cured, it forms waterproof, UV resistant surface which also repairs the cracks up to 5mm.
Applicable also on damp surfaces.
Good resistance to UV, water and moisture.
Self-leveling.
Paintable.
Applicable by brush, roller or a spatula.
Provides water vapor permeability, allowing the surface to breathe.
Environmental friendly Free of bitumen, isocyanates and solvent
