We introduce the new concept that has excellent features will be fit for building
construction, building reinforcement, retrofitting and strengthening old structure.
UD (Unidirectional) Carbon fiber fabric which is carbon reinforcement that non-woven and
features all fibres running in a single, parallel direction. It provides ultimate strength in the direction
of the fiber grains.
UD carbon fabric 200g, 300g, 600gsm at width from 10cm-100cm.
The main property of UD carbon fiber are below:
1. Light weight, easy to construct, and little increasing the weight on constructed based materials.
2. Soft, free to cut, is suitable for a variety of shapes structures, and have close adhesion with
reinforced concrete surface.
3. The thickness is small, so it is easy to overlap.
4. High tensile strength, high flexibility, and have the same effect as to use steel plate reinforcement.
5. Anti-acid and alkali, corrosion resistance, and can be used in any harsh environment.
6. Fabric with Epoxy widely used in water conservancy, water proofing and fire proofing solution.
7. The supporting epoxy resin impregnated adhesive (recommended our company matching epoxy
adhesive) have good permeability, the construction is simple and time required is short.
8. Non-toxic, non-irritating odour, living still in construction.
9. Carbon fiber sheet has high tensile strength, which is equivalent 10 - 15 times to ordinary steel.
UD Carbon fiber fabric can be mainly applicable in below areas:
Building reinforcement, renovation, Fireproofing, waterproofing solution and any other civil
construction and retrofitting works.
Carbon Fiber Plate for Reinforcement. We choose the good quality 12K carbon
filament, which steadily ensures the plate with high tensile strength and modulus all the time. The
tensile strength can reach 2400MPa, tensile modulus can reach 160GPa. Now wrap system is very
popular all over the world, because itâ??s obvious strengthening to the structure and easy operation,
less time and cost on construction. Besides, our plate has its own advantage compared to other
manufacturer, it surface is without release agent that can result in much better bonding with the
concrete.
Carbon Plate 1.2mm, 1.4mm, 2mm & 3mm thick, 5cm, 10cm, 20cm wide.
Carbon Fiber Plate can be applicable in below area:
1. The remedy repair and strengthening of the plate and beam of concrete structures
2. The strengthening of the openings around the wall and plate
3. The strengthening of beams of wooden buildings etc.
We have certain situation of exporting genuine hardwood charcoal from Bangladesh that you desire. Our genuine charcoal short specification are bellow: shape will be round or bar, Color black gray, Size and diameter as your demand but usually Length 15cm to 17 cm and diameter 4 cm to 6 cm, Minimum 4 hour burning time , Must be no smoke and high carbon level, Calorific value min 6000 kcl.
We have certain situation of exporting genuine hardwood charcoal from
Bangladesh that you desire. Our genuine charcoal short specification are bellow: shape will be round or bar, Color black gray, Size and diameter as your demand but usually Length 15cm to 17 cm and diameter 4 cm to 6 cm, Minimum 4 hour burning time , Must be no smoke and high carbon level, Calorific value min 6000 kcl.
