Material: Aluminum Port Size: 4
Layout: 2x2 Panel Size: 400x400mm
Aluminum Entry Panels with 4 Ports Aluminum Entry Panel 2x2
Aluminum Entry Panels with 4 Ports Aluminum Entry Panel 2x2
Model: Aluminum Entry Panels with 4 Ports
Description: Aluminum Entry Panel 2x2
Telsto Entry Panels runs feeder cable to enter buildings and shelters. These seals support the coax at the entry point and prevent moisture from entering the building. Each boot assembly must be fitted with a cushion to hold the coax in place. Entry plates are offered with a flexible selection of holes combination and plate sizes to match your exact application.
Aluminum Entry Panels with 4 Ports Aluminum Entry Panel 2x2
Hansen 50ohm RF 50 1/2´ Regular Standard Coaxial feeder Cable
Hansen 50ohm RF 50 1/2 Regular Standard Coaxial feeder Cable
construction
inner conductor material conpper clad aluminum wire
dia. 4.80±0.05 mm
insulation material physically foamed PE
dia. 12.20±0.30 mm
outer conductor material ring corrugated copper
diameter 13.80�±0.20 mm
jacket material PVC or fire retardant PE
diameter 15.80�±0.20 mm
mechanical properties
bending
radius
single
repeated
moving
70 mm
125 mm
350 mm
pulling strength 1130 N
crush resistance 2.0 kg/mm
recommended temperature PE jacket store -70�±85�°C
installation -40�±60�°C
operation -55�±85�°C
fire retardant PE jacket store -30�±80�°C
installation -25�±60�°C
operation -30�±80�°C
electrical properties
impedance 50�±2 �©
capacitance 75.8 pF/m
inductance 0.19 uH/m
propagation velocity 88 %
DC breakdown voltage 4.0 kV
insulation resistance >5000 MQ.km
peak power 40 kW
screening attenuation >120 dB
cut-off frequency 8.8 GHz
attenuation and average power
frequency,MHz power rate@20�°C,kW nom.attenuation@20�°C,dB/100m
10 11.3 0.67
100 3.49 2.17
450 1.59 4.75
690 1.338 5.97
800 1.17 6.46
900 1.1 6.85
1000 1.04 7.28
1800 0.753 10.10
2000 0.71 10.70
2200 0.656 11.24
2400 0.620 11.78
2500 0.612 12.06
2600 0.604 12.34
2700 0.595 12.61
3000 0.565 13.40
maximum attenuation value may be 105% of the nominal attenuaiton value.
vswr
820-960MHz 1.15
1700-2200MHz 1.15
2300-2400MHz 1.15
standards
2011/65/EU compliant
IEC61196.1-2005 compliant
Quick-Grip Grounding kit for 7/8 coaxial cable
Quick-Grip Grounding kit for 7/8 coaxial cable
Model: TEL-GK-H-7/8
Description: Grounding Kit for 7/8 in coaxial cable
Features
Fast installation
Perfect lighting protection
Total weather proofing
Suitable for various size cables
Quick-Grip Grounding kit for 7/8 coaxial cable
N Male Angle connector for 1/2 Superflexible RF cable RF Coaxial Connector
N Male Angle connector for 1/2 Super flexible RF cable RF Coaxial Connector
RF Connector
Model: TEL-NMA.12S-RFC
Description:
N Male Angle connector for 1/2 Superflexible RF cable
N Male Angle connector for 1/2 Super flexible RF cable RF Coaxial Connector
TNC male to female RF Lightning surge arrestor
TNC male to female RF Lightning Gas discharge tube surge arrestor
Surge arrestors are designed to provide excellent lightning protection and outstanding RF performances. Telsto Gas tube lightening surge arresters can be integrated directly into the cabling system and provide reliable surge protection in case of over voltages. Our surge arrestors provide excellent lightning protection and outstanding RF performance. All designs are low return loss, low insertion loss and low intermodulation.
*High quality materials
*Excellent RF performance
*Total weatherproof
*Available with type N or 7/16 DIN type
*Waterproof
*Environment resistance ensures long life and consistent performance
TNC male to TNC female RF Lightning arrester
-TNC male to TNC female connectors
-Protect your antenna and device from dangerous electrical surges
Telsto series of DC pass RF lightning and surge protection products with an extended frequency operating band from DC to 3000MHz.
It is the perfect RF equipment protection solution for most application requiring DC voltage and current to power tower top mounted electronics, which is suitable for outdoor as well as indoor installations and the special plated ensures durability and long life.
Electrical Specifications
Frequency Range:DC-3G
Input Impedance:5
VSWR:
Gel Seal Closure products provide a quick and low level installation skill set method to weatherproof jumper to antenna and jumper to feeder connections.
Optic fiber clamp for fiber cable, power cable, double type 6 holes
Optic fiber clamp for fiber cable, power cable, double type 6 holes
Model: TEL-OFC-003
Description:
Combined cable clamp for fiber optical cable(FO) and power cable(DC)
Telsto optic fiber clamps are used to fix power cable and fiber optical cable at the same time. Itâ??s available for power cable: 10-14mm, Optic fiber cable: 6.8mm. It can fix three fiber cables and three power cables at most. The C-shape bracket and pressing board are compact and terse. It is simple to fix the cables reliably.
Features/Benefits
l Customized products
l High quality materials
l Total fastening
Optic fiber clamp for fiber cable, power cable, double type 6 holes
Telsto Cold Shrink Splice Cover Kits are designed to be an easy-to-install, safe and fast method of covering splices on Spacer Cable. The tubes are open-ended rubber sleeves which are factory-expanded and assembled onto removable plastic cores. After the tube has been positioned for installation over an in-line splice, the core is removed, thus allowing the tube to shrink and seal the splice.
Material: Copper Used For: 1/4 In And 3/8 In
Standard Grounding Kit used for 1/4 in and 3/8 in
Standard Grounding Kit used for 1/4 in and 3/8 in
This type of grounding kit can be used for 1/4 in and 3/8 in corrugated & braided coaxial cable. It was designed according to Commscope (Andrew) GK-242948. Features of this product are installed by the cable ties. It allows it can be used for at least two types of coaxial cable.
Standard Grounding Kit
Compact structure
Faster and easy installation
No loose parts
Material: Stainless Steel Size: Customized
Stainless steel cable tie cable accessories self-locking ball-locking steel cable tie
Stainless steel cable tie cable accessories self-locking ball-locking steel cable tie
Cable Tie Steel
Model: TEL-CTS-4.6*370
Description:
Telsto ball-locking steel cable tie is most popular type which are made from high quality steel material, having the characters such as heat-resisting ,erosion control, insulate well, fireproof and not apt to age.
Ideal for use on small leads or objects
Structure: Self locking, ball bearing mechanism for quick and easy installation, either by hand
High resistance to acetic acid, alkali acid, suiphuric acid, etc.
370mm Long - 4.6 mm Wide
Material: Stainless steel 304, 201, 316
Brand New, Retail Bagged
Maximum Bundle diameter : 102mm
Working temperature: -80-500
Usage: Stainless steel cable tie cable accessories self-locking ball-locking steel cable tie