This machine is designed to turn the semi-finished product into conical paper tube after V cutting,grinding,pressing,reversing and galling.
The speed can be abjusted freely with cverâ??load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and lower the waste rate. The after finishing machine can also be used individually.
After completing the ZSZ-2018 design, the semi-finished product needs to be converted into a cone-shaped paper tube, and then V-notch, curling, curling head, Back and back.
The speed can be adjusted freely with overload protection, and it can stop automatically in case of abnormal operation, Ensure the stability and safety of work and reduce waste.
Main parameter:
 For conical tubes with various taper
Speed:48/min
Air pressure: 0,3 - 0,4
 Size: 2600� *1600� *1580�
This machine is designed to turn the semi-finished product into conical paper tube after V cutting,grinding,pressing,reversing and galling.
The speed can be abjusted freely with cverâ??load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and lower the waste rate. The after finishing machine can also be used individually.
This machine is suitable for conical tubes of various specification.After hanging the paper roll,internal and external printing, edge grinding,cutting.reeling.head cutting,the semi-finished paper tube will be sent to the dryer.It takes double speed variable frequency control technology.The reeling speed will be adjusted automatically .The whole process is eased by connecting with the dryer.
Automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
automatic production line of paper cone textiles does not require manual control of paper raw materials. The whole production process is controlled by PLC program, and the main transmission mechanism adopts the time mechanism of cam distribution. Each position adopts dual speed variable frequency adjustment technology, and there is a wide range of photoelectric control elements without mechanical wear, Contactless control, pneumatic delay and so on are the complete embodiment of mechatronics. Suitable for different specifications of paper cone tube products.
Process
Rolling--internal and external printing--edge-grinding--cutting--Reeling--Drying--Finishing--cutting V -shaped opening processing--grinding--galling--finishing
This machine need no manual operation form raw paper to paper tube product.The whole production process is controlled by PLC programming,main engine transmission uses can timing mechanism.All bearings of the machine adopt Japanese NSK bearings.Each position takes double speed variable frequency control technology.Also the none mechanical abrasion photoelectric control,approaching control and pneumatic delay control,which realize the mechanical and electrical integration.Suitable for the production of conical tube with various specification.
Process
Pollingâ??internal and external printingâ??edge grindingâ??cuttingâ??Reelingâ??Dryingâ??Finishingâ??cutting V-shaped openingâ??opening processing â??pressingâ??grindingâ??gallingâ??finishing
Product parameters
Power:49.2KW
Speed:25-60pcs/min
Size:1400mm*6000mm*3800mm
ZSZ-2020 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
Process:
Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing
ZSZ-2020 after finishing part is designed to turn the semi-finished product into conical paper tube after V cutting, grinding, pressing, reversing and galling.
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and lower the waste rate. The after finishing machine can also be used individually.
Main parameter:
For conical tubes with various taper
Speed: 110 pcs/min
Power: 12kw
Air pressure: 0.3-0.4mpa
Size: 4500*1900*1580mm
We are Making, Exporting and Supplying Single Side Gluing Paper Cone Reeling Machine in Xingtai, Hebei, China.
ZSZ-2017 automatic conical paper tube reel is suitable for conical tubes of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, reeling, head cutting, the semi-finished paper tube will be sent to the dryer. It takes double speed variable frequency control technology. The reeling speed will be adjusted automatically. The whole process is eased by connecting with the dryer. Main parameter for conical tubes with various taper and caliber.
Speed: 48pcs/min
Power: 13.27kw
Size: 6080mm*2240mm*1500mm
ZSZ-2020 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
Process:
Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing
Main Parameter:
Power:45KW
Speed: 110 pcs/min
Size: 14000mm*7000mm*3800mm
Operator: 1
This machine need no manual operation form raw paper to paper tube product.The whole production process is controlled by PLC programming,mian engine transmission uses can timing mechanism.All bearings of the machine adopt Japanese NSK bearings.Each position takes double speed variable frequency control technology.Also the none mechanical abrasion photoelectric control,approaching control and pneumatic delay control,which realize the mechanical and electrical integration.Suitable for the production of conical tube with various specification.
ZSZ-2020 automatic conical paper tube reel is suitable for conical tubes of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, reeling, head cutting, the semi-finished paper tube will be sent to the dryer. It takes double speed variable frequency control technology. The reeling speed will be adjusted automatically. The whole process is eased by connecting with the dryer.
Main parameter:
For conical tubes with various taper and calibre.
Speed:110 pcs/min
Power: 15kw
Size: 6080mm*2500mm*1500mm
ZSZ-2020 after finishing part is designed to turn the semi-finished product into conical paper tube after V cutting, grinding, pressing, reversing and galling.
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and lower the waste rate. The after finishing machine can also be used individually.
Main parameter:
For conical tubes with various taper
Speed: 110 pcs/min
Power: 12kw
Air pressure: 0.3-0.4mpa
Size: 4500*1900*1580mm
ZSZ-2018 automatic cone tube production line
Product introduction
This machine need no manual operation form raw paper to paper tube product.The whole production process is controlled by PLC programming,mian engine transmission uses can timing mechanism.All bearings of the machine adopt Japanese NSK bearings.Each position takes double speed variable frequency control technology.Also the none mechanical abrasion photoelectric control,approaching control and pneumatic delay control,which realize the mechanical and electrical integration.Suitable for the production of conical tube with various specification.
Process
Polling internal and external printing edge grinding cutting Reeling Drying Finishing cutting V-shaped opening opening processing pressing grinding galling finishing
ZSZ-2018 automatic conical paper tube after finishing machine
This machine is designed to turn the semi-finished product into conical paper tube after V cutting,grinding,pressing,reversing and galling.
The speed can be abjusted freely with cver load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and lower the waste rate. The after finishing machine can also be used individually.
Product parameters
Varieties of bobbin:For conical tubes with various taper
Air perssure:0.3-0.4mpa
Speed:35-50pcs/min
Operator:1
Size:2600*1600*1580
LQZ-2 tracing, cutting spiral tube machine
LQZ-2 tracing,cutting spiral tube machineâ??s function is to roll tue tube and long tube cutting.Tolerances:+5mm,which will meet the standard for cloth tube reeling and air spining reeling. If particular length needed, precision cutter will need be connected.
Product parameters
Paper tube thickness:0.8-10mm
Paper tube diameter: â??20- â??200mm
Speedï¼?3-15meters/minï¼?step-less speed adjustmentï¼?
Gluing mode:Inclined gluing
Paper Hanger:Whole frame
Product configuration
All products are adopt NSK bearings imported form Japan.Grinding grade Taiwan silver guide wire rod.
This machine is designed to turn the semi-finished product into conical paper tube after V cutting,grinding,pressing,reversing and galling.
The speed can be abjusted freely with cverload protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and lower the waste rate. The after finishing machine can also be used individually.
Product parameters
Varieties of bobbin:For conical tubes with various taper
Air perssure:0.3-0.4mpa
Speed:35-50pcs/min
Operator:1
Size:2600*1600*1580
Automatic production line of paper cone textiles does not require manual control of paper raw materials. The whole production process is controlled by PLC program, and the main transmission mechanism adopts the time mechanism of cam distribution. Each position adopts dual speed variable frequency adjustment technology, and there is a wide range of photoelectric control elements without mechanical wear, Contactless control, pneumatic delay and so on are the complete embodiment of mechatronics. Suitable for different specifications of paper cone tube products.
� Process
Rolling--internal and external printing--edge-grinding--cutting--Reeling--Drying--Finishing--cutting V -shaped opening processing--grinding--galling--finishing
Main parameter
Power:49.2Kw
Speed:48/min
Size:14000mm*6000mm*3800mm
Operator:1
Automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
The ZSZ-2018 auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured Low consumption and high outcome. Paper tube can be feed and collected automatically after connecting with other equipment.
Main Parameter:
Speed:48pcs/min
Power: 10.1-24.5kw
Size: 5620mm*1700mm*3800mm
Automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings.� Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
� Process:
Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing
Main Parameter:
Power:49.2KW
Speed: 50/min
Size: 14000mm*6000mm*3800mm
Operator: 1
The automatic control temperature ZSZ-2018 of drying oven adopts the drying cycle circuit. Once the temperature is determined, it can be adjusted freely, with low consumption and high performance. The paper cartridge can be a power supply and automatically assembled to connect to another device.
This machine is suitable for conical tubes of various specification.After hanging the paper roll,internal and external printing, edge grinding,cutting.reeling.head cutting,the semi-finished paper tube will be sent to the dryer.It takes double speed variable frequency control technology.The reeling speed will be adjusted automatically .The whole process is eased by connecting with the dryer.
ZSZ-2020 after finishing part is designed to turn the semi-finished product into conical paper tube after V cutting, grinding, pressing, reversing and galling.
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and lower the waste rate. The after finishing machine can also be used individually.
Main parameter:
For conical tubes with various taper
Speed: 110 pcs/min
Power: 12kw
Air pressure: 0.3-0.4mpa
Size: 4500*1900*1580mm
The ZSZ-2020 auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured Low consumption and high outcome. Paper tube can be feed and collected automatically after connecting with other equipment.
Main Parameter:
Speed: 110 pcs/min
Power: 18kw
Size: 7500mm*1500mm*3600mm
ZSZ-2020 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
Process:
Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing
Main Parameter:
Power:45KW
Speed: 110 pcs/min
Size: 14000mm*7000mm*3800mm
Operator: 1
zsz-2018 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
The automatic control temperature zsz-2018 of drying oven adopts the drying cycle circuit. Once the temperature is determined, it can be adjusted freely, with low consumption and high performance. The paper cartridge can be a power supply and automatically assembled to connect to another device.
Main options:
Speed: 48 / min
Efficiency: 10.1-24.5kw
External dimension: 5620mm-1700mm * 3800mm
automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
This machine need no manual operation form raw paper to paper tube product.The whole production process is controlled by PLC programming,mian engine transmission uses can timing mechanism.All bearings of the machine adopt Japanese NSK bearings.Each position takes double speed variable frequency control technology.Also the none mechanical abrasion photoelectric control,approaching control and pneumatic delay control,which realize the mechanical and electrical integration.Suitable for the production of conical tube with various specification.
Process
Pollingâ??internal and external printingâ??edge grindingâ??cuttingâ??Reelingâ??Dryingâ??Finishingâ??cutting V-shaped openingâ??opening processing â??pressingâ??grindingâ??gallingâ??finishing
Product parameters
Power:49.2KW
Speed:25-60pcs/min
Size:1400mm*6000mm*3800mm
automatic production line of paper cone textiles does not require manual control of paper raw materials. The whole production process is controlled by PLC program, and the main transmission mechanism adopts the time mechanism of cam distribution. Each position adopts dual speed variable frequency adjustment technology, and there is a wide range of photoelectric control elements without mechanical wear, Contactless control, pneumatic delay and so on are the complete embodiment of mechatronics. Suitable for different specifications of paper cone  Process
Rolling--internal and external printing--edge-grinding--cutting--Reeling--Drying--Finishing--cutting V -shaped opening processing--grinding--galling--finishing
paper reeler is a special equipment for manufacturing various tapered sleeves. After rolling up the large paper roll, the cover has internal and external seals, processing edge, cutting, winding cone, cutting concentric reducer, half bag paper The coil will be sent to the drying device using dual speed AC technology. The speed winding will be adjusted automatically. Through the connection with the drying box, the hole process is simple.
Main parameter
Spool type: different taper, taper diameter
Speed:48/min
Power: 49.2Kw
Size: 6080�¼�¼*2240�¼�¼*1500�¼�¼
ZSZ-2018 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
This machine need no manual operation form raw paper to paper tube product.The whole production process is controlled by PLC programming,main engine transmission uses can timing mechanism.All bearings of the machine adopt Japanese NSK bearings.Each position takes double speed variable frequency control technology.Also the none mechanical abrasion photoelectric control,approaching control and pneumatic delay control,which realize the mechanical and electrical integration.Suitable for the production of conical tube with various specification.
This machine uses chain-type circulation drying.After setting up the temperature,the heat can be contrilled,maintained and adjusted freely,featured Low consumption and high outcome.Paper tube can be feed and collected automatically after connecting with other equipment.
ZSZ-2020 automatic conical paper tube reel is suitable for conical tubes of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, reeling, head cutting, the semi-finished paper tube will be sent to the dryer. It takes double speed variable frequency control technology. The reeling speed will be adjusted automatically. The whole process is eased by connecting with the dryer.
Main parameter:
For conical tubes with various taper and calibre.
Speed:110 pcs/min
Power: 15kw
Size: 6080mm*2500mm*1500mm
We are indulged in making, exporting and supplying High Speed Paper Cone Drying Machines in Xingtai, Hebei, China.
The ZSZ-2017 auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured low consumption and high outcome. Paper tube can be feed and collected automatically after connecting with other equipment.
Details:
Main Parameter:
Speed: 48pcs/min
Power: 10.1-24.5kw
Size: 5620mm*1700mm*3800mm
We are Making, Exporting and Supplying Single Side Gluing Paper Cone Afterfinish Machines in Xingtai, Hebei, China.
ZSZ-2017 after finishing part is designed to turn the semi-finished product into conical paper tube after V cutting, grinding, pressing, reversing and galling. The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and lower the waste rate. The after finishing machine can also be used individually.
Main parameter: For conical tubes with various taper
Speed: 48pcs/min
Air pressure: 0.3-0.4mpa
Size: 2600mm*1600mm*1580mm
We Make, Export and Supply of High Speed Textile Paper Cone Production Line in Xingtai, Hebei, China.
ZSZ-2017 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
Process:
Rolling, internal and external printing, edge grinding, cutting, Reeling, Drying, Finishing, cutting V shaped opening, opening processing, pressing, grinding, galling, finishing
Main Parameter:
Power:49.2KW
Speed: 48pcs/min
Size: 14000mm*6000mm*3800mm
Operator: 1
ZSZ-2020 automatic conical paper tube reel is suitable for conical tubes of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, reeling, head cutting, the semi-finished paper tube will be sent to the dryer. It takes double speed variable frequency control technology. The reeling speed will be adjusted automatically. The whole process is eased by connecting with the dryer.
Main parameter:
For conical tubes with various taper and calibre.
Speed:110 pcs/min
Power: 15kw
Size: 6080mm*2500mm*1500mm
ZSZ-2020 automatic conical paper tube reel is suitable for conical tubes of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, reeling, head cutting, the semi-finished paper tube will be sent to the dryer. It takes double speed variable frequency control technology. The reeling speed will be adjusted automatically. The whole process is eased by connecting with the dryer.
Main parameter:
For conical tubes with various taper and calibre.
Speed:110 pcs/min
Power: 15kw
Size: 6080mm*2500mm*1500mm
ZSZ-2020 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
ZSZ-2020 automatic conical paper tube reel is suitable for conical tubes of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, reeling, head cutting, the semi-finished paper tube will be sent to the dryer. It takes double speed variable frequency control technology. The reeling speed will be adjusted automatically. The whole process is eased by connecting with the dryer.
Main parameter:
For conical tubes with various taper and calibre.
Speed:110 pcs/min
Power: 15kw
Size: 6080mm*2500mm*1500mm
ZSZ-2020 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
ZSZ-2020 automatic conical paper tube reel is suitable for conical tubes of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, reeling, head cutting, the semi-finished paper tube will be sent to the dryer. It takes double speed variable frequency control technology. The reeling speed will be adjusted automatically. The whole process is eased by connecting with the dryer.
Main parameter:
For conical tubes with various taper and calibre.
Speed:110 pcs/min
Power: 15kw
Size: 6080mm*2500mm*1500mm
ZSZ-2017 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
ZSZ-2020 after finishing part is designed to turn the semi-finished product into conical paper tube after V cutting, grinding, pressing, reversing and galling.
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and lower the waste rate. The after finishing machine can also be used individually.
Main parameter:
For conical tubes with various taper
Speed: 110 pcs/min
Power: 12kw
Air pressure: 0.3-0.4mpa
Size: 4500*1900*1580mm
ZSZ-2020 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
Process:
Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing
ZSZ-2020 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
Process:
Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing
ZSZ-2020 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
Process:
Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing
ZSZ-2020 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
Process:
Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing
Main Parameter:
Power:45KW
Speed: 110 pcs/min
Size: 14000mm*7000mm*3800mm
Operator: 1
ZSZ-2018 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
This machine is designed to turn the semi-finished product into conical paper tube after V cutting,grinding,pressing,reversing and galling.
The speed can be abjusted freely with cverâ??load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and lower the waste rate. The after finishing machine can also be used individually.
This machine need no manual operation form raw paper to paper tube product.The whole production process is controlled by PLC programming,mian engine transmission uses can timing mechanism.All bearings of the machine adopt Japanese NSK bearings.Each position takes double speed variable frequency control technology.Also the none mechanical abrasion photoelectric control,approaching control and pneumatic delay control,which realize the mechanical and electrical integration.Suitable for the production of conical tube with various specification.
ZSZ-2020 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
Process:
Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing
paper reeler is a special equipment for manufacturing various tapered sleeves. After rolling up the large paper roll, the cover has internal and external seals, processing edge, cutting, winding cone, cutting concentric reducer, half bag paper The coil will be sent to the drying device using dual speed AC technology. The speed winding will be adjusted automatically. Through the connection with the drying box, the hole process is simple.
Main parameter
Spool type: different taper, taper diameter
Speed:48/min
Power: 49.2Kw
automatic conical paper tube reel is suitable for conical tubes of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, reeling, head cutting, the semi-finished paper tube will be sent to the dryer. It takes double speed variable frequency control technology. The reeling speed will be adjusted automatically. The whole process is eased by connecting with the dryer.
Main parameter:
For conical tubes with various taper and calibre.
Speed: 48pcs/min
Power: 13.27kw
Size: 6080mm*2240mm*1500mm
The automatic control temperature zsz-2018 of drying oven adopts the drying cycle circuit. Once the temperature is determined, it can be adjusted freely, with low consumption and high performance. The paper cartridge can be a power supply and automatically assembled to connect to another device.
� � Main parameter:
� Speed: 48 /min
� Power: 10.1-24.5KW
� Size:5620mm*1700mm*3800mm
1.Printing & Hem polish part
Two printing machine separate into inner printing machine and and external printing machine. The internal printing machine is mainly print number and pattern inside of the cone.
External printing machine is mainly print color and pattern on top or bottom of cone.
Hem polish machine separate into internal hem polish machine and external hem polish machine.
The function of internal hem polish machine is to grind paper 1/3 thin, it helps cone spindle able to attach paper.
The function of external hem polish machine is to grind paper thin, it helps cone's outside easier to stick on.
Two printing machine separate into inner printing machine and and external printing machine. The internal printing machine is mainly print number and pattern inside of the cone.
External printing machine is mainly print color and pattern on top or bottom of cone.
Hem polish machine separate into internal hem polish machine and external hem polish machine.
The function of internal hem polish machine is to grind paper 1/3 thin, it helps cone spindle able to attach paper.
The function of external hem polish machine is to grind paper thin, it helps cone's outside easier to stick on.
ZSZ-2020 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
Process:
Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing
Main Parameter:
Power:45KW
Speed: 110 pcs/min
Size: 14000mm*7000mm*3800mm
Operator: 1
ZSZ-2020 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
Process:
Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing
Main Parameter:
Power:45KW
Speed: 110 pcs/min
Size: 14000mm*7000mm*3800mm
Operator: 1
ZSZ-2020 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
Process:
Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing
Main Parameter:
Power:45KW
Speed: 110 pcs/min
Size: 14000mm*7000mm*3800mm
Operator: 1
ZSZ-2020 automatic conical paper tube reel is suitable for conical tubes of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, reeling, head cutting, the semi-finished paper tube will be sent to the dryer. It takes double speed variable frequency control technology. The reeling speed will be adjusted automatically. The whole process is eased by connecting with the dryer.
Main parameter:
For conical tubes with various taper and calibre.
Speed:110 pcs/min
Power: 15kw
Size: 6080mm*2500mm*1500mm
ZSZ-2020 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
Process:
Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing
Main Parameter:
Power:45KW
Speed: 110 pcs/min
Size: 14000mm*7000mm*3800mm
Operator: 1
ZSZ-2020 after finishing part is designed to turn the semi-finished product into conical paper tube after V cutting, grinding, pressing, reversing and galling.
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and lower the waste rate. The after finishing machine can also be used individually.
Main parameter:
For conical tubes with various taper
Speed: 110 pcs/min
Power: 12kw
Air pressure: 0.3-0.4mpa
Size: 4500*1900*1580mm
The automatic control temperature zsz-2018 of drying oven adopts the drying cycle circuit. Once the temperature is determined, it can be adjusted freely, with low consumption and high performance. The paper cartridge can be a power supply and automatically assembled to connect to another device.
� � Main parameter:
� Speed: 48 /min
� Power: 10.1-24.5KW
� Size:5620mm*1700mm*3800mm
ZSZ-2018 fully automatic conical paper tube reeling machine
This machine is suitable for conical tubes of various specification.After hanging the paper roll,internal and external printing, edge grinding,cutting.reeling.head cutting,the semi-finished paper tube will be sent to the dryer.It takes double speed variable frequency control technology.The reeling speed will be adjusted automatically .The whole process is eased by connecting with the dryer.
Product paramenters
Varieties of bobbin :For conical tube with various taper and calibre
Speed:50-60pcs/min
Power:13.27KW
Size:6080mm*2240mm*1500mm
ZSZ-2020 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
Process:
Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing
Main Parameter:
Power:45KW
Speed: 110 pcs/min
Size: 14000mm*7000mm*3800mm
Operator: 1
