As a Chinese plate heat exchanger manufacturer, we focus on plate heat exchanger, all kinds of plates and gaskets producing. Through 13 years of development, all of our products are the perfect replacement to Alfa Laval, Gea, APV, Tranter, Sondex, Thermowave, Funke brands etc. Should you have any interest or demand, please come to me for details.
The Alfa Laval plate and gasket models that we can be Replaced:
M3 M6B M6M TL6B TS6 M10B M10M TL10B TL10P AM10 A10B A15B FM15B M15M T20M M20M T20B T20P TL20P AM20B AM20 A20B T20S TS20 TS20M AK20 MX25M MX25B M30 P16 P26 P36 TL35B Clip6 Clip8 Clip10 Clip15 M6MW M10BW MK15BW M20MW M30BW MA30S MA30M AX30B MA30 TL15B T2B T5B T5M T8B T8M T50M AQ80
Our plate material 304, 316L, Titanium, Hastelloy C-276 254SMO 904L;
Our gasket and ring gasket material NBR, EPDM, VITON, HNBR, CR;
As a Chinese plate heat exchanger manufacturer, we focus on plate heat exchanger, all kinds of plates and gaskets producing. Through 13 years development, all of our products are perfect replacement to Alfa Laval, Gea, APV, Tranter, Sondex, Thermowave, Funke brands etc. Should you have interest or demand, please come to me for details.
The Alfa Laval plate and gasket models that we can be Replaced:
M3 M6B M6M TL6B TS6 M10B M10M TL10B TL10P AM10 A10B A15B FM15B M15M T20M M20M T20B T20P TL20P AM20B AM20 A20B T20S TS20 TS20M AK20 MX25M MX25B M30 P16 P26 P36 TL35B Clip6 Clip8 Clip10 Clip15 M6MW M10BW MK15BW M20MW M30BW MA30S MA30M AX30B MA30 TL15B T2B T5B T5M T8B T8M T50M AQ80
Our plate material 304, 316L, Titanium, Hastelloy C-276 254SMO 904L;
Our gasket and ring gasket material NBR, EPDM, VITON, HNBR, CR;
Product Model
ALFA LAVAL model
M3 M15B AM10 M6MW P16 T2B
M6B M15M A10B M10BW P26 T5B
M6M M20M A15B MK15BW P36 T5M
TL6B T20B AM20B M20MW Clip6 T8B
TS6M T20P AM20 MA30BW Clip8 T8M
M10B T20S A20B MA30S Clip10 T50M
M10M TS20M MX25M MA30M Clip15
TL10B AK20 MX25B MA30 TL15B
TL10P M30 TL35B AX30B AQ80
THERMOWAVE model
TL90S TL150S TL200S TL250S TL400S TL500S TL650S LT850S DN150A
TL90P TL150P TL200P TL250P TL400P TL500P TL650P LT850P TL50P
Semi Welded PHE Plates And Gaskets model
M3 M6B M6M M10B S14
S37 GL13 VT205 M36 S21
As a Chinese plate heat exchanger manufacturer, we focus on plate heat exchanger, all kinds of plates and gaskets producing. Through 13 years of development, all of our products are the perfect replacement to Alfa Laval, Gea, APV, Tranter, Sondex, Thermowave, Funke brands etc. Should you have any interest or demand, please come to me for details.
The Alfa Laval plate and gasket models that we can be Replaced:
M3 M6B M6M TL6B TS6 M10B M10M TL10B TL10P AM10 A10B A15B FM15B M15M T20M M20M T20B T20P TL20P AM20B AM20 A20B T20S TS20 TS20M AK20 MX25M MX25B M30 P16 P26 P36 TL35B Clip6 Clip8 Clip10 Clip15 M6MW M10BW MK15BW M20MW M30BW MA30S MA30M AX30B MA30 TL15B T2B T5B T5M T8B T8M T50M AQ80
Our plate material 304, 316L, Titanium, Hastelloy C-276 254SMO 904L;
Our gasket and ring gasket material NBR, EPDM, VITON, HNBR, CR;
Principle
A plate and frame heat exchanger as known as gasketed plate heat exchanger is a high efficiency heat exchanger that assembled from metal sheets with corrugated pattern and different kind of gaskets. Plate heat exchangers are the ideal equipment for heat exchange between liquid-liquid and liquid-vapor.In the case of the same pressure loss, the heat transfer coefficient is 3-5 times higher than that of the tube heat exchanger, but the floor space is one-third of the tube heat exchanger, and the heat recovery rate can be as high as 90% or more.
Maximum volume: 5000m3 /h;Maximum design pressure: 25bar
Maximum temperature: 200 celsius degree; Minimum difference in temperature: 0.5-1 celsius degree
Nozzle diameter: DN15~DN500;Plate thickness: 0.4mm - 1.2mm
Gasket material:NBR, EPDM, HNBR, HT-NBR, HEPDM, CR,VITON/FKM
Fixed and movable plate material: Carbon Steel, Stainless Steel, and others on request.
Plate material:AISI304, AISI316, AISI316L, Titanium,Ti-Pa,Hastelloy C276,254SMO,Nickel, AISI904L.
Plate heat exchanger
High heat transfer coefficient
The design of the plate corrugation is aimed at the high thermal conductivity. The special flow path are formed by the plate corrugation causing strong disturbance flow at a very low flow rate, which is called turbulent flow. And the disturbance flow can be self-cleaning to prevent fouling and thus the heat transfer efficiency is high.
Plate heat exchanger
Large logarithmic temperature difference
The temperature difference at the end is small, and the plate heat exchanger is mostly a cocurrent or countercurrent type of flow. In addition,there's no bypass flow.
Plate heat exchanger
Small footprint and easy maintenance
The plate heat exchanger has a compact structure, and the heat exchange area per unit volume is 2-5 times that of the shell-and-tube type, and the floor area of the plate heat exchanger is about 1/2-1/3 of the shell - tube heat exchanger when achieving same heat exchange capacity .
Product principle
The plate and shell heat exchanger adopts a circular corrugated heat exchanger plate that welded into a heat exchanger lathed bundle and combined with the structure of the pressure vessel shell. It also has a high heat transfer efficiency,compact structure and resistant to high temperature & pressure like shell tube heat exchanger. The plate and shell heat is durable under high temperature & pressure,large temperature difference and thermal shock, which is in a leading position in the industry.
Maximum volume:2500m3/h; Maximum design pressure:100bar
Maximum temperature:450 celsius degree; Minimum difference in temperature:0.5-1celsius degree
Nozzle diameter:DN25~DN500; Plate thickness:0.8mm - 1.2mm
Gasket material:NBR, EPDM, HNBR, HT-NBR, HEPDM,CR,VITON/FKM
Fixed and movable plate material: Carbon Steel, Stainless Steel, and others on request.
Plate material:AISI304, AISI316L, Titanium,Ti-Pa,Hastelloy C276,254SMO,Nickel, AISI904L.
Features
Plate Shell Heat Exchanger
Safe and reliable
Unique and durable lathed bundle structure: It can resist pressure shock and thermal shock very well; round plate and circular ring welding, stress distributes evenly; no welding between lathed bundle and shell, and it can withstand various thermal expansion (deformation ).The tubular shell structure is a strong, durable and safe pressure vessel; it can be installed in any position without being affected from outside; the solid protective shell will not leak or burst, and there is no danger of leakage to the environment.
Plates & Gaskets For Heat Exchanger
1.Raw material purchases from the same factory with famous brands like Alfa Laval, GEA, Funke etc.
2.Plates produced by precision molds and advanced press machine that detect & correct regularly.
3.Adpot same production and technology with Gislaved Gummi to ensure gasket quality.
Plates material: SS304, SS316, SS316L, Titanium, Ti-Pd, Hastelloy-C276, Nickel, 254 SMO, 904L.
Plates thickness: 0.5mm - 1.2mm
Gaskets material: NBR, EPDM, HNBR, HT-NBR, HEPDM, VITON/FKM, FDA sanitary
Hanging method: Glued, Hang on, Clip on, Snap in, Paraclip, Sonderlock.
*Other materials may be available on request.
Product Model
APV model
T4 Q055E M107 R5 TR9GN B205
H12 Q055D M092 R8 TR9GL B158
H17 Q080E M060 R8GI SR6GL B134
N35 Q080D J060 R10 SR6AG B110
N25 A055 J092 R14 SR2(R2) B063
N50 A085 J107 TR9AL SR3 P190
Q030E
A145 J185 TR9AV SR9 P105
Q030D K71 K55 K34
Product introduction
The plate condenser consists of plates that are welded together in pairs to form a so-called plate set. The concept of a plate set leads to two different types of channels: a weld channel for condensing steam and a gasket seal channel for cooling water. This type of plate is specially designed for optimum condensation. It has an asymmetrical arrangement with a large gap on the steam side and a small gap on the cooling water side. This makes it possible to maintain a very low pressure drop at the steam end while maintaining a certain speed and turbulence on the cooling water side. This maximizes heat transfer efficiency and minimizes fouling.
Plate condensers are specially developed for condensing steam under low pressure or vacuum conditions in evaporation and distillation systems. It can meet a variety of specific applications and capabilities requirements. The steam inlet fitting is large and the two condensate outlets are small. The cooling water fitting is a medium size and is located in the center of the plate.
Maximum heat transfer area: 500m2/set; Maximum design pressure:16bar
Maximum temperature:200 celsius degree; Nozzle diameter:DN50~DN700
Plate thickness:0.5mm-1.2mm; Gasket material:NBR, EPDM, HNBR, HT-NBR, HEPDM, CR, VITON/FKM
Fixed and movable plate material: Carbon Steel, Stainless Steel, and others on request.
Plate material:AISI304, AISI316, AISI316L, Titanium, Ti-Pa,Hastelloy C276,254SMO,Nickel, AISI904L.
Features
Plate condenser
Lower cost
Due to the high heat transfer efficiency, this means less heat exchange area and higher cost efficiency than conventional shell and tube type, especially when stainless steel or titanium is required. The compact design also saves space, thus reducing transportation and installation costs.
Plate condenser
Less fouling
Due to the high strength turbulence created by the specially designed corrugated sheets, there is less fouling on the cooling water side than the shell and tube condenser.
Plate condenser
Easy to clean
The cooling water side is easy to clean, whether in the way of mechanical or chemical.
Plate condenser
Easy to expand
Just add an extra "plate group" in the existing frame.
Plate condenser
Complete counterflow
A greater degree of subcooling of non-condensable gases can be achieved compared to shell and tube equipment. Therefore, the load of the vacuum pump will be reduced.
Range of application
Alumina, food industry, sugar industry, beverage industry, industrial wastewater, etc.
Product principle
The working principle of the plate evaporator is to compress the secondary steam generated by the equipment through the configured compressor, then raise the pressure and temperature to a certain range, and finally transfer it to the relevant heating chamber of evaporator as heating steam. Finally, to perform the condensation heat release program, so that it can help the latent heat of the steam and the recycling can be effectively obtained.
Maximum heat transfer area: 500m2/set; Maximum design pressure:16bar
Maximum temperature:200 celsius degree; Nozzle diameter:DN50~DN500
Plate thickness:0.4mm;Gasket material:NBR, EPDM, HNBR, HT-NBR, HEPDM, CR, VITON/FKM
Fixed and movable plate material: Carbon Steel, Stainless Steel, and others on request.
Plate material:AISI304, AISI316, AISI316L, Titanium, Ti-Pa,Hastelloy C276,254SMO,Nickel, AISI904L.
Advantages
Plate evaporator
High heat transfer efficiency
The plate evaporator is ingenious in design, so the heat transfer efficiency is higher than that of the general evaporator. Generally, the plate evaporator area only needs about one-half of the tube evaporator then can achieve the same evaporation effect.
Plate evaporator
Compact overall structure
The whole structure is compact, floor space is small, and there is no need to invest too much manpower and material resources in the later use process. For some maintenance work, it only needs to be carried out in the original space range, and it's very simple whether it is disassembled or installed .
Plate evaporator
Diversification of components
The heat exchange area can be effectively adjusted according to the customer's needs: now the heat exchange area of different evaporators has different ranges, since the heat exchanger plates can be disassembled, so multiple components with multiple skills and more new functions can be provided through adjusting number of plates and changing relative flow path.
Plate evaporator
Small heat loss
Because this type of equipment is compact in structure and relatively light in weight, compared with tubular evaporators, it also reduces heat loss, and such equipment usually does not need to be insulated.
Plate evaporator
Less pressure loss
Under the same heat transfer coefficient condition, such evaporator equipment can control the pressure loss within a certain range by rotating a reasonable flow rate.Compared with tubular evaporator,it can reduce 2/3 pressure loss.
Plate evaporator
Stable and safe operation
Different sealing procedures are designed on the sealing device between the plates, and
Range of application
Metallurgy, food industry, paper industry, air conditioning, chemical and desalination industries
The semi welded plate heat exchanger is composed of a pair of plates, and each of the two plates is laser welded to form a pair of plates. It is sandwiched between the fixed pressing plate and the movable pressing plate in a superimposed manner
Product introduction
Semi welded plate heat exchanger
The semi welded plate heat exchanger is composed of a pair of plates, and each of the two plates is laser welded to form a pair of plates. It is sandwiched between the fixed pressing plate and the movable pressing plate in a superimposed manner. The mesh contacts are formed between adjacentplates and supported by each other, and the rigidity of the plates is remarkably enhanced. Our semi welded plate heat exchanger adopts advanced laser welding technology, which has the advantages of small welding deformation, small residual stress and high quality.Qingdao Ruipute has advanced welding technology, especially for the first time to achieve the welding technology of special materials such as titanium, we are at the domestic leading level in developing and manufacturing semi-welded titanium plate heat exchange equipment.
The cavity of the pair of plates forms a pass of a medium; the two pairs of plates are sealed by a sealing gasket which is resistant to corrosion, high temperature and high pressure, and constitutes another medium pass; the two mediums flow evenly in a countercurrent way in the adjacent channels to complete the sufficient heat exchange process. This structure ensures the stability of the welded plate pairs, providing easy maintenance of each pair of plates. It has the characteristics of high safety, high heat transfer efficiency, long service life and easy maintenance. It is suitable for cooling and chemical treatment. It is the ideal alternative equipment to shell and tube heat exchanger and all welded plate heat exchanger.Especially suitable for evaporation and condensation of ammonia coolants,as well as chemical treatment of corrosive liquids.
Maximum volume:5000m3 /h; Maximum design pressure:25bar
Maximum temperature:150 celsius degree; Minimum difference in temperature:0.5-1celsius degree
Nozzle diameter:DN15~DN500; Plate thickness:0.5mm - 1.2mm
Gasket material:NBR, EPDM, HNBR, HT-NBR, HEPDM,CR,VITON/FKM
Fixed and movable plate material: Carbon Steel, Stainless Steel, and others on request.
Plate material:AISI304, AISI316, AISI316L, Titanium,Ti-Pa,Hastelloy C276,254SMO, Nickel, AISI904L.
Characteristics
The semi welded heat exchanger has the general characteristics with shell and tube heat exchanger, and yet have other features like
The double wall plate heat exchanger plate is welded integrally with two thin plate pieces along the corner hole of each pair of plates. When the plate leaks, for example, the perforation caused by long time working will be easily detected from outside. Thereby it stops mixing between two materials.And at the same time, they plays very important roles towards warning internal leakage. Combined with the double seal of the gasket, the possibility of mixing two materials is avoided, and it is suitable for applications with high sanitary requirements or high safety and reliability of industrial production. Since the two sheets are welded to form a sheet, the heat transfer coefficient is inevitably lowered, but the highest safety is achieved in preventing materials mixing.
Plate And Shell Heat Exchanger Plate Pack
ATW40 ATW50 ATW100 ATW150
Wide Runner (Free Flow) Plate Heat Exchanger
Maximum treatment capacity: 5000 cubic meters/hour
Maximum design pressure: 40 bar
Maximum temperature resistance: 200â??
Minimum temperature differenceï¼?0.5-1â??
Tube diameter: DN15~500
Plate thickness: 0.4mm - 1.2mm
Gasket material: NBR, EPDM, HNBR,HT-NBR,HEPDM,CR,VITON/FKM
Plate material: 304, 316, 316L, titanium, titanium palladium, hastelloy C276, 254SMO, nickel, 904L, etc.
Large mean logarithmic temperature difference
02 Large log-averaged temperature difference
Plate heat exchanger is mostly parallel or counter-current flow mode. Select the number of processes and channels, the initial selection of cold, hot fluid flow and the number of channels, and thus calculated flow rates. Cold, hot fluid in the plate heat exchanger flow parallel to the heat transfer surface, no bypass, thus making the end temperature difference is small, the logarithmic mean temperature difference is large .
Weâ??re a China based plate heat exchanger manufacturer, and we specialize in plate type heat exchanger, all kinds of plates and gaskets producing. 500+ moulds are with us, and we can replace the most applied plates and gaskets for Alfa Laval Gea, APV, Tranter, Sondex, Funke, Thermowave etc. Thereâ??s no difference when comparing our products with genuine ones. And through the past 13 years, we have been selling them to all over the world, especially in European and American markets.
The GEA brand, plates and gaskets we can produce and replace is:
VT04 VT10 VT20 VT205 VT20P VT40 VT40(M) VT405P VT405 VT80 VT80(M) VT805
VT2508
Our plate material 304, 316L, Titanium, Hastelloy C-276 254SMO 904L;
Our gasket and ring gasket material NBR, EPDM, VITON, HNBR, CR;
We are a China based plate heat exchanger manufacturer, and we specialize in plate type heat exchanger, all kinds of plates and gaskets producing. 500+ moulds are with us, and we can replace the most applied plates and gaskets for Alfa Laval Gea, APV, Tranter, Sondex, Funke, Thermowave etc. Thereâ??s no difference when comparing our products with genuine ones. And through the past 13 years, we have been selling them to all over the world, especially in European and American markets.
The GEA brand, plates and gaskets we can produce and replace is: NT50T NT50M NT50X NT100TNT100M NT100X NT150L NT150S NT250S NT250M NT250L NT350S NT350M
Our plate material 304, 316L, Titanium, Hastelloy C-276 254SMO 904L;
Our gasket and ring gasket material NBR, EPDM, VITON, HNBR, CR;
Plates & Gaskets For Heat Exchanger
1.Raw material purchases from the same factory with famous brands like Alfa Laval, GEA, Funke etc.
2.Plates produced by precision molds and advanced press machine that detect & correct regularly.
3.Adpot same production and technology with Gislaved Gummi to ensure gasket quality.
Plates material: SS304, SS316, SS316L, Titanium, Ti-Pd, Hastelloy-C276, Nickel, 254 SMO, 904L.
Plates thickness: 0.5mm - 1.2mm
Gaskets material: NBR, EPDM, HNBR, HT-NBR, HEPDM, VITON/FKM, FDA sanitary
Hanging method: Glued, Hang on, Clip on, Snap in, Paraclip, Sonderlock.
*Other materials may be available on request.
