1. Quantity of channels: 8-channel parallel DA
2. Resolution: 16 bit
3. Max updating rate: 1MHZ
4. Output range: ±10V
5. 48-channel bidirectional TTL level digital input / output
The DAC function module ZY42203 is a data acquisition module based on PXI/CPCI bus, which has such above mentioned prominent performances.The DAC function module is a data acquisition module based on the PXI/CPCI/PCI/PC104 bus respectively, which is one of the most widely used products in the testing industry. The data acquisition DAC function module we developed has many types with good reliability. In addition, it can also provide modules with Windows, Linux, Lab VIEW/RT, RTX, QNX, Wince module drivers and APIs, which can be widely used in construction of automatic testing systems, data acquisition and recording systems, control simulation system development and other fields.
Performance Parameters
Output channel: 8-channel parallel DA channels
Max updating rate: 1MHZ
Resolution: 16 bit
Voltage input range: ±10V
General Specifications
External dimensions (L H): Standard PXI/CPCI 3U board 160mmX100mmX4HP, tolerance
ZY44205 is a DIO function module based on PXI/CPCI bus, which supports 96-channel discrete input. Each channel can be individually set to power/off or power ground/off or power/power ground input detection by jumper choice.
General Specifications
External dimensions (LÃWH): standard PXI/CPCI 3U card 160mm100mm4HP, tolerance< 0.2mm, with 3U puller
Connector: SCSI-100 plug-and-jack type connector
Working Environment
Temperature range: -40 ~ +85
Relative humidity: Work, 5~85%, no condensation; storage, 5~95%, no condensation
Typical Application
Construction of automatic test system
1. 8 channels of sending, 8 channels of reception;
2. Receive and add current system time;
3. Timing transmission and data can be updated at any time;
4. Receive labeled filtering and interrupt receiving;
5. The baud rate can be set to 10K, 12.5K, 48K, 50K, 100K, 150K;
6. FIFO reset function of sending and receiving, set to receive enable signal;
7. Send FIFO including 511x32BIT , and receive FIFO including (1M-1) Ã?32BIT
8. Standard ARINC429 data format, receiving and sending can be set separately;
Product Description:
ZY32208/32308 interface module which researched and developed according to ARINC429 Bus Communication Agreement is based on buses PXI/CPCI/PCI. The data can be updated at any time, and the word interval, message interval, the predetermined quantity of transmitting messages and the quantity of sent messages can be set up. The modules SCSI-68-pinhole connector makes it easy to operate. The powerful functions of this module can meet users communication testing requirements, and the excellent compatibility is available to all types of system configurations.
Performance Parameters:
Quantity of Transmitting channel: 8;
Quantity of receiving channel: 8;
Baud rate: 10K/12 5K/48K150K/100K/150K;
Send FIFO: 511Ã?32BIT;
Receive FIFO: (1M-1)Ã?32BIT;
General Specifications:
External dimensions (LÃ?WÃ?H): Standard PXI/CPCI3U card 160mmÃ?100mmÃ?4HP, tolerance
1. 8 channels of sending, 8 channels of reception;
2. Receive and add current system time;
3. Timing transmission and data can be updated at any time;
4. Receive labeled filtering and interrupt receiving;
5. The baud rate can be set to 10K, 12.5K, 48K, 50K, 100K, 150K;
6. FIFO reset function of sending and receiving, set to receive enable signal;
7. Send FIFO including 511x32BIT , and receive FIFO including (1M-1) Ã?32BIT
8. Standard ARINC429 data format, receiving and sending can be set separately;
Product Description:
ZY32208/32308 interface module which researched and developed according to ARINC429 Bus Communication Agreement is based on buses PXI/CPCI/PCI. The data can be updated at any time, and the word interval, message interval, the predetermined quantity of transmitting messages and the quantity of sent messages can be set up. The modules SCSI-68-pinhole connector makes it easy to operate. The powerful functions of this module can meet users communication testing requirements, and the excellent compatibility is available to all types of system configurations.
Performance Parameters:
Quantity of Transmitting channel: 8;
Quantity of receiving channel: 8;
Baud rate: 10K/12 5K/48K150K/100K/150K;
Send FIFO: 511Ã?32BIT;
Receive FIFO: (1M-1)Ã?32BIT;
General Specifications:
External dimensions (LÃ?WÃ?H): Standard PXI/CPCI3U card 160mm100mm 4HP, tolerance
1. 8 channels of sending, 8 channels of reception;
2. Receive and add current system time;
3. Timing transmission and data can be updated at any time;
4. Receive labeled filtering and interrupt receiving;
5. The baud rate can be set to 10K, 12.5K, 48K, 50K, 100K, 150K;
6. FIFO reset function of sending and receiving, set to receive enable signal;
7. Send FIFO including 511x32BIT , and receive FIFO including (1M-1) 32BIT
8. Standard ARINC429 data format, receiving and sending can be set separately;
Product Description:
ZY32208/32308 interface module which researched and developed according to ARINC429 Bus Communication Agreement is based on buses PXI/CPCI/PCI. The data can be updated at any time, and the word interval, message interval, the predetermined quantity of transmitting messages and the quantity of sent messages can be set up. The modules SCSI-68-pinhole connector makes it easy to operate. The powerful functions of this module can meet users communication testing requirements, and the excellent compatibility is available to all types of system configurations.
Performance Parameters:
Quantity of Transmitting channel: 8;
Quantity of receiving channel: 8;
Baud rate: 10K/12 5K/48K150K/100K/150K;
Send FIFO: 51132BIT;
Receive FIFO: (1M-1)32BIT;
General Specifications:
External dimensions (LWH): Standard PXI/CPCI3U card 160mm100mm4HP, tolerance
1.For anti-UAV, forced landing and drive mode are adopted
2.Target at the designated position
3.Manual \ automatic adjustment of strike frequency band and power
4.Flexible customized interference mode, automatic start and stop
5.The electronic map shows the working status and strike area in real time
6.Guided by UAV radar, UAV Radio Monitoring Equipment, Optoelectronic Device and other equipment
7.Equipment self-check, abnormal report
8.Standard interfaces and protocols for secondary development components
Product Description:
ZY-JKFZ-EIM025P Portable Jammer can launch multi-band electromagnetic wave to counter the interference of UAV, and can quickly make forced landing or drive away low-altitude UAV, so as to realize effective control of "black flight" UAV. This jammer device is portable, easy to operate, easy to disassemble and easy to carry.
ZY-JKFZ-4010A can suppress the remote control frequency and image transmission frequency of UAVs and interfere with the navigation signal of UAVs. With high aiming accuracy and long interference distance, it can easily and quickly interfere with the black flying UAVs. Of course we can add the detection alarm function to it according to your requirement.
Product Parameters:
ZY-JKFZ-EIM025P:
Interference intervention distance: 1km;
Azimuth coverage (horizontal): 360
Host weight: 5655g;
Charger weight: 300g;
Telescopic sight weight: 520g;
Interference band: 800-950 MHz;1550~1620MHz; 2400~2485MHz; 5720~5870MHz (Other frequency bands can be customized);
Interference time: 1s;
The time to perform a forced landing or return: 5s;
Expand the withdrawal time: 0.2min;
Environmental electromagnetic wave permissible radiation intensity: 12V/m;
EMC electromagnetic compatibility: Normal;
Control interface: Network/serial port;
Interference type: Narrow band noise interference, broadband noise interference, frequency sweep noise interference;
Power supply: AC220V/50Hz;
Working Temperature: -20-55;
ZY-JKFZ-4010A:
Frequency range: GPS/Glonass 2400MHz 5800MHz;
Strike range: 1.5km;
Antenna gain: GPS/Glonass > 12dbi 2.4G> 11dbi 5.8G > 12dbi;
Signal output rate: GPS/Glonass 2.4G
1. Dual CPU redundant structure
2. Provide Micro SD, USB memory interface
3. RS232/422, AD/DA.PWM
4. Embedded inertial navigation unit, differential GPS unit
5. Data link transmitting unit
6. Provide DC 24Voltage output and motor driving module
7. Aluminum alloy profile frame structure
8. The base with a JPMZ-0.5 shock absorber
9. PC104 stack structure with ATAG & UART test interfaces
The device is a flight control computer platform applied to UAV with laminated structure of four layers inside, including functions as data processing, data acquisition, communication, long-distance data transmission, direction inertial navigation and so on. It adopts PC104 stack, peripheral module construction realized by external extend devices local bus of embedded processer. This device contains one port of RS232 and one port of RS422, debug interface for JTAG and UART, built-in inertial navigation, barometer, GPS module and a base with JPMZ-0.5 shock absorber. The whole machine frame structure is designed by aviation aluminum alloy-alloy so it has obvious characters of firm construction and light body. It is a flight control computer which integrates aviation control with task to meet the autonomous flight control and mission of the multi-rotatable wings/fixed-wings airplane and helicopter.
Working Environment
Temperature range: -10 65
Relative humidity: 595, no condensation
Shock vibration: 5g
General Specifications
External dimensions (LH) (without ear): 12515088 mm
Case material: aviation aluminum alloy
Typical Applications
Construction of automatic testing system
Laboratory automation, research and design verification
ZY-JKFZ-2000C portable reconnaissance and strike integrated system adopts a body, miniaturized design consisting of the antenna array, signal processing equipment, control terminal and so on. Including automatic real-time passive detection, no dead Angle, zero interference detection, early warning, accurate identification, identification of friend and foe, it also can identify the only electronic fingerprint of the same brand and model UAV. Using narrow band and low power for precise strike, it can carry out omnibearing defense and take over multiple UAVs. Furthermore, it can be easy to carry and fast to deploy.
Product Parameters
Frequency range 70MHz~6000MHz
Reconnaissance distance. 3km
Strike distance.... 1.5km
Reconnaissance sensitivityover -95dbm (25kHz)
Reconnaissance airspace.... 360°the whole airspace
Power supply.. power, oil generator, battery
Built-in battery life....4 hours
Operating temperature.. -40°C~+70°
Dimension... 57cm X 25cm X35cm
Product Description
ZY-JKFZ-2000A fixed reconnaissance strike integrated system consists of antenna array, information processing equipment, commanding terminal and so on. It is capable of automatic real-time passive detection, no dead Angle, zero interference detection, early warning, accurate identification, and identification of friend and foe, and can identify the only electronic fingerprint of the same brand and model UAV. Adopting narrow band and low power for precise strike, it can fully defend and take over multiple UAVs.
Product Parameters
Frequency range 70MHz~6000MHz
Reconnaissance distance. 9km/5km/3km
Strike distance.... 3km/2km
Reconnaissance sensitivityover -95dbm (25kHz)
Reconnaissance airspace.... 360°the whole airspace
Protection class.. IP65
Connection mode... wired connection (network or optical cable)
Operating temperature.. -40°C~+70°
Power supply.. C12V
Dimension... 42cm X 18cm X 46cm
1.Multi-band and all-band scanning to detect drones
2.Support urban mode, suburban mode, base station mode and other complex environment application mode
3.Interference linkage
4.Create a black and white list identifying WIFI type drones
5.Passive detection, GPS positioning, automatic north calibration, unattended
6.Equipment self-inspection, historical data return visit
7.No high-power electromagnetic radiation in the system. Strong concealment. No interference to environment and human body
8.Small and light, suitable for portable
Product Description
ZY-JKFZ-RAD001 UAV Radio Monitoring Equipment can realize real-time search, detection and alarm for UAV data transmission and measurement and control signals, and has parameters for UAV data transmission and measurement and control signals.
This radio frequency drone detection has the functions of measurement, single-station direction finding and rough ranging. Combined with the identification database, it can identify the model of UAV and the manufacturer. At the same time, this drone detection device can also locate and continuously track the UAV, and display its position and track in real time on the map.
ZY-JKFZ-3010A UAV Radio Monitoring Equipment is composed of passive detection antenna array, signal processing equipment and control terminal which can implement automatic real-time passive, no dead angle, zero interference detection and advance warning. According to different equipment hardware and software configuration, there are 4 product series with detection distance not less than 500m\2km \5km\9km provided, and the detection distance of network can be extended indefinitely. Furthermore it has been added new Al intelligent algorithm with unknown UAV detection capability.
ZY-JKFZ-EIM100/0 Omnidirectional Jammer adopts omnidirectional antenna combination to block and interfere with the reception and processing of UAV's figure transmission, remote control and navigation signals within a range of 360, so as to achieve countermeasures such as forced course reversal, forced landing and drive away, so as to quickly and effectively dispose suspicious UAV.
1. For anti-UAV, forced landing and drive mode are adopted
2. Manual \ automatic adjustment of strike frequency band and power
3. Flexible customized interference mode, automatic start and stop
4. The electronic map shows the working status and strike area in real time
5. Guided by UAV radar, UAV Radio Monitoring Equipment, Optoelectronic Device and other equipment
6. Equipment self-check, abnormal report
7. Standard interfaces and protocols for secondary development components
Product Parameters
Interference intervention distance: 0.6km1km
Control pitch Angle: 16
Azimuth coverage (horizontal): 360
Interference beam width: 1550~1620MHz; 2400~2485MHz; 5720~5870MHz(Other frequency bands can be customized)
Antenna gain: 1550~1620MHz 6Db; 2400~2485MHz 5720~5870MHz 8db
Interference time: 1s
Interference type: Narrow band noise interference, broadband noise interference, frequency sweep noise interference
Control interface: Network/serial port
Weight: 20Kg (standard frequency band)
Power supply: AC220V/50Hz
Equipment power: 950W (All frequencies)
Physical Features
Working Temperature: -30-55
Storage Temperature: -40~60
General Specification
Dimensions (LWH): 480mm155mm340mm
Protection grade: IP66
