Product Description
Electronic Interlock Pass Box can be divided into two different kinds, normal pass box & air shower pass box. It is mainly usedfor preventing the air into the clean room and purifying the goods during the passing.
Normal Pass box:
The outside material of box is lacquer coated steel, and inside we use full stainless steel. This can make it easy for cleaning and keep it strength and durability.
The lock can be mechanical or electronic interlock.
Visual glass window
Air shower pass box:
The outside material of box is lacquer coated steel, and inside we use full stainless steel. This can make it easy for cleaning and keep it strength and durability.Use DSX particular fan with high pressure & large volume, less resistance filter. The air velocity can reach to 25m/s to make sure the dedust efficiency.
Automatic control system for air shower, electric interlock
Indicator light for both side, displaying the working status.
Use both pre-filter & HEPA filter, prolonging the working life of HEPA filter and reducing the operating cost.
Alternative accessories
Ring type intercom System, for convenient contact between inside and outside.
Yellow film for the window, to prevent UV and Static
Germicidal lamp for ultraviolet sterilization
Pneumatic lifting door, the opening method can use swipe card, password, sensor & distant control.
Electronic Interlock Pass Box Parameters
Drief Introduction
The Pass through box is a clean room auxiliary equipment, its function is to purify the goods pass the buffer between indoor and outdoor clean area to prevent items due to the pass to open the door and destroyed the clean room air and chamber pressure, morecan reduce the operating personnel move to prevent the entry of the dust of the outer region, the stability of the clean room.
FAQ
Q: Are you manufacturer or trading company?
A: We are manufacturer for clean room equipment, we have plant in Jiangsu
Q: What's your product?
A: We specialty in manufacturing clean room equipment and filters, and then the accessory for clean room
equipment.
Q:How about your after sale service?
A:We will reply you within 24hours by email or phone.
If we have local agent,we will arrange him to your site within 24 hours to assist you to shoot the problem.
Q:Can you arrange the visit to your user?Can you customized the machine according to our requirements?
A:Yes,Of course.
Product Description
1.No Partition HEPA Filter
Filter Paper: H13-H14 Fiber glass
Filter Efficiency: H13-H14 H13:99.97-99.99% 0.3μm,H14:99.995-99.999% 0.3μm(MPPS)
Frame: Aluminum profile box, Aluminum folding box, Galvanized Box, Stainless steel box
Protection net: powder painted diamond-shape network
Sealing: Neoprene
Filter size: according to customers requirement
Thickness of Aluminum profile: 46mm,50mm,69mm,80mm,90mm,96mm;
Application: Ultra LSI factory, semiconductor industry, Atomic force research, Clean room, Laminar hood, Clean bench etc
2. HEPA Filter with partition
The filter material folds into wedge pleat. There are two impressions after bending the filter material. Wedge pleat can avoid damage of filter material. For corrosive environments, ethylene coated partition can be applied. The Efficiency for filtering 0.3umparticles can reach to 99.99%.
Filter Paper: H13-H14 Fiber glass
Filter Efficiency: H13-H14 H13:99.97-99.99% 0.3μm,H14:99.995-99.999% 0.3μm(MPPS)
Frame: Aluminum profile box, Aluminum folding box, Galvanized Box, Stainless steel box
Partition material: plastic or aluminum foil
Sealing: Neoprene
Filter size: according to customers requirement
Thickness of Aluminum profile: 120mm,150mm,220mm,295mm
Application: High level purification equipment, Filter elements of purification system, partial purification equipment or clean workshop etc
FAQ
Q: Are you manufacturer or trading company?
A: We are manufacturer for clean room equipment, we have plant in Jiangsu
Q: What's your product?
A: We specialty in manufacturing clean room equipment and filters, and then the accessory for clean room
equipment.
Q:How about your after sale service?
A:We will reply you within 24hours by email or phone.
If we have local agent,we will arrange him to your site within 24 hours to assist you to shoot the problem.
Q:Can you arrange the visit to your user?Can you customized the machine according to our requirements?
A:Yes,Of course.
Drief Introduction
HEPA box is widely applied to air conditioning system in pharmacy, biology, electronics, and chemistry etc. It is used to
transforming and building terminal filter unit. HEPA box contains electrostatic box, HEPA filter and flowing panel. The connecting
type can be top connection or side connection.
DSX particularly design this HEPA box according to the demands of DOP testing. It uses liquid sealed method and equipped with
smoke tube. The smoke tube can make smoke evenly when testing.
Features
1. Compact structure, reliable sealing, top or side air inlet, square or round flange
2. Use cold rolled steel for case of HEPA box, and anti-static plastic coating for surface. It contains electrostatic box, HEPA filter and flowing panel. It can be used to transforming and building terminal filter unit in clean room. It needs low operating cost and easy for installation.
3. The electrostatic box use mild steel as material, and combined with HEPA box as a whole. There is a regulating valve to adjust the evenness of air supplying and the effect of static pressure.
4. light weight and easy for installation.
FAQ
Q: Are you manufacturer or trading company?
A: We are manufacturer for clean room equipment, we have plant in Jiangsu
Q: What's your product?
A: We specialty in manufacturing clean room equipment and filters, and then the accessory for clean room
equipment.
Q:How about your after sale service?
A:We will reply you within 24hours by email or phone.
If we have local agent,we will arrange him to your site within 24 hours to assist you to shoot the problem.
Q:Can you arrange the visit to your user?Can you customized the machine according to our requirements?
A:Yes,Of course.
Product Description
Clean Bench is a kind of clean room equipment which meets strict demands for working environment. It can provide 100-10000 level cleanness for partial clean area. It provides high cleanness and can move easily. Clean bench is widely used in optics, biochemistry, microelectronics, precision instrument etc. Clean bench can be classified into vertical flow and horizontal flow.
Double side vertical flow clean bench
1. Work table is separate from the frame of clean bench, therefore there is no vibration.
2. Work table use stainless steel as material which is wear resistant and easy to clean.
3. It is suitable for forming clean production line, and the cleanness can reach to 100 according to individuals' requirements.
Horizontal flow clean bench
1. Work table use stainless steel as material which is wear resistant and easy to clean.
2. The bottom of the clean bench use universal wheels which is easy to move and install
3. The clean bench use high quality fan system which has features such as long service life, low noise, free-maintenance, small vibration, stable performance etc. The fan can rotate more than 50,000 hours.
FAQ
Q: Are you manufacturer or trading company?
A: We are manufacturer for clean room equipment, we have plant in Jiangsu
Q: What's your product?
A: We specialty in manufacturing clean room equipment and filters, and then the accessory for clean room
equipment.
Q:How about your after sale service?
A:We will reply you within 24hours by email or phone.
If we have local agent,we will arrange him to your site within 24 hours to assist you to shoot the problem.
Q:Can you arrange the visit to your user?Can you customized the machine according to our requirements?
A:Yes,Of course.
Product Description
Deshengxin dispensing booth for pharmaceutical Conduct dust, reagent weighing in equipment, packaging, can control dust, reagent spills, prevent dust inhalation hazard to human being, also avoid dust, reagents cross contamination, protecting the external environment and interior personnel security. The operation area of the weighing booth is in one thousand clean class vertical flow area matched ISO6 (NF, EN, ISO14644-1) protection.
Weighing room is a professional purification equipment using for sampling, weighing and analyzing to control of dust pollution. The indoor air would go through prefilter, medium efficiency filter and then draw in plenum chamber by centrifugal fan. Next the air would go through HEPA filter and blowout. The clean air will flow into the clean area with average velocity to provide clean working environment. The operation area of Center Weighing Room will maintain the negative pressure and blow out10% recycling air.
Features
1.Automatic changeable frequency system monitors the air velocity to ensure its stability in the work area.
2.Unique designed air duct effectively controls the noise.
3.Differential pressure gauge is equipped to real-time monitor the filters.
4.Uniform flow design of main working area can protects the operators and prevent environmental pollution and cross contaminationof products.
5.Intelligent control mode and alarm system ensure the reliability of running.
6.Smooth transitions of wall and ground can eliminate the blind angle.
7.Customized design is welcome.
FAQ
Q: Are you manufacturer or trading company?
A: We are manufacturer for clean room equipment, we have plant in Jiangsu
Q: What's your product?
A: We specialty in manufacturing clean room equipment and filters, and then the accessory for clean room
equipment.
Q:How about your after sale service?
A:We will reply you within 24hours by email or phone.
If we have local agent,we will arrange him to your site within 24 hours to assist you to shoot the problem.
Q:Can you arrange the visit to your user?Can you customized the machine according to our requirements?
A:Yes,Of course.
Product Description
Clean Booth is a kind air cleaning unit for partial purification. It can be quickly mounted in any area which needs partialpurification. The frame of clean booth usually uses industrial aluminum or stainless steel & lacquer coated Iron as raw material. And it is equipped with FFU at the top and electrostatic curtain or tempered glass all around. The purification level inside can reach to 100 class. It is quite suitable for high demanding of purification level in workshop.
Application
A modular Clean booth is an environment, typically used in manufacturing or scientific research, that has a low level of environmental pollutants such as dust, airborne microbes, aerosol particles and chemical vapors. More accurately, a clean booth has a controlled level of contaimination that is specified by the number of particles per cubic meter at a specified particle size. To give perspective, the ambient air outside in a typical urban environment contains 35,000,000 particles per cubic meter in the size range 0.5um and larger in diameter, corresponding to an ISO9 clean booth, while an ISO1 clean booth allows no particles in that size range and only 12 particles per cubic meter of 0.3um and smaller.
FAQ
Q: Are you manufacturer or trading company?
A: We are manufacturer for clean room equipment, we have plant in Jiangsu
Q: What's your product?
A: We specialty in manufacturing clean room equipment and filters, and then the accessory for clean room
equipment.
Q:How about your after sale service?
A:We will reply you within 24hours by email or phone.
If we have local agent,we will arrange him to your site within 24 hours to assist you to shoot the problem.
Q:Can you arrange the visit to your user?Can you customized the machine according to our requirements?
A:Yes,Of course.
Product Description
Deshengxin produce and assemble own motor, wind rotor and shell.That makes it easier to control quality and production schedule.DSX fan has been widely used in domestic cleaning products.Professional team, strong r&d strength, make our air shower fan take occupancy rate of 90% in the domestic high-end market.Now DSX is one of China's leading air shower fan brands. The integrity casts brand, the strength casts quality,the innovation creates value. DSX is your reliable high quality cleaning equipment supplier. We produce excellent motor ourselves. Our motors supply to nearby factories and our own use. Our logo "DSX" is popular with many counterparts. Most procedures in-house finished,more convenient to control quality,and more efficiency if there's necessary changes.Professional researching and developing team,committed to improve quality and develop new product.Different sizes can be customized according to clients' demands
Drief Introduction
1. Good looking:The fan body be stamp by precise mould with Power coating;
2.Impeller: the blade type, curve of front coil and plate after plate;
3.Compact structure,various size for option,easy for installation;
4.Rotor: should be made of the dynamic balance and static balance, ensure the steady running, good performance..
5.Durable external rotor motor with thermal link,Matching speed-controllers is available
FAQ
Q: Are you manufacturer or trading company?
A: We are manufacturer for clean room equipment, we have plant in Jiangsu
Q: What's your product?
A: We specialty in manufacturing clean room equipment and filters, and then the accessory for clean room
equipment.
Q:How about your after sale service?
A:We will reply you within 24hours by email or phone.
If we have local agent,we will arrange him to your site within 24 hours to assist you to shoot the problem.
Q:Can you arrange the visit to your user?Can you customized the machine according to our requirements?
A:Yes,Of course.
Product Description
FFU (Fan Filter Unit) is the combination of the Fan and Filter, also known as "filtering equipment of the air blower. Head is usually installed in the clean room terminal air supply, usually placed in the hoisting of the "dry" gasket seal on the keel frame. Above the head part is fan module, the following sections for the filter. According to the requirements of cleanliness, the filter can provide different levels of efficiency (HEPA) or super efficient (ULPA) filter, clean air for clean room. Fan module in addition to overcome the resistance of the hepa filter head lower, but also overcome the resistance of the entire circulation wind all components of the channel, so as to maintain a set of wind speed operation. Flexible head system had advantages of simple design and construction, wind speed regulating, clean area is easy to change wait for a characteristic, therefore has become one of the popular industrial clean room system.
Drief Introduction
FFU Fan Filter Unit which draws in contaminated air from the top of the module, and exhausts filtered clean air vertically in a unidirectional (laminar) air stream at its base, is a self-contained fan and filter module for cleanroom applications.
Application
FFU's are commonly used in the construction of Class 1 to Class 100,000 cleanrooms, even forming ultra clean line, clean closet
and etc...
FAQ
Q: Are you manufacturer or trading company?
A: We are manufacturer for clean room equipment, we have plant in Jiangsu
Q: What's your product?
A: We specialty in manufacturing clean room equipment and filters, and then the accessory for clean room
equipment.
Q:How about your after sale service?
A:We will reply you within 24hours by email or phone.
If we have local agent,we will arrange him to your site within 24 hours to assist you to shoot the problem.
Q:Can you arrange the visit to your user?Can you customized the machine according to our requirements?
A:Yes,Of course.
Product Description
Air Shower is a kind of partial clean equipment with rather strong universality and is installed at the partition between the clean and non-clean rooms. Its used for the personnel or matters to shower before entering the clean area. After using it, thedust could effectively be reduced to enter the clean area and maintain the normal working status.
Outside case: 1.2mm cold rolled steel with powder coated or staniless steel(SUS#201 OR 304)
Inside case: 1.2mm cold rolled steel with powder coated or staniless steel(SUS#201 OR 304)
Doors: SUS#201,SUS#304 or aluminum alloy
Door type: Swing door, Sliding door Or Shutter door
Base: SUS#201 or 304
Nozzles:SUS#304
Drief Introduction
Air showers are a tool that allows for people and/or objects to enter a clean area without bringing in unwanted contaminants such as dust and bacteria. Air showers act as a sort of buffer or air lock between two areas of varying cleanliness, and preserve the air quality of a dynamic clean environment. Due to their usefulness and simplicity, air showers are a critical component of modern-day cleanroom facilities.
FAQ
Q: Are you manufacturer or trading company?
A: We are manufacturer for clean room equipment, we have plant in Jiangsu
Q: What's your product?
A: We specialty in manufacturing clean room equipment and filters, and then the accessory for clean room
equipment.
Q:How about your after sale service?
A:We will reply you within 24hours by email or phone.
If we have local agent,we will arrange him to your site within 24 hours to assist you to shoot the problem.
Q:Can you arrange the visit to your user?Can you customized the machine according to our requirements?
A:Yes,Of course.